Universal Electronics 9900 EVA BLE Remote Control and QuickSet User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2935755
Application ID	rpxGse/MVIrYCqYoQA2bBw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.69kB (246156 bits)
Date Submitted	2016-03-18 00:00:00
Date Available	2016-09-10 00:00:00
Creation Date	2016-03-07 15:15:41
Producing Software	Acrobat Distiller 9.5.5 (Windows)
Document Lastmod	2016-03-07 15:15:41
Document Title	Microsoft Word - EVA Quick Reference Guide Rev1.1.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	jmendez

EVA
EVA
Universal Remote Control
Quick Reference Guide
CONTROLLING EVA BOX
1. Turn on the TV.
2. Locate the 5‐ digit code for your TV.
3. Turn on the TV.
4. Press and hold MUTE and SELECT at the same time until the green light flashes twice.
5. Using the number keys enter the 5‐digit code for your brand of TV. If performed
correctly, the green light under the TV flashes twice.
6. Aim the remote at your TV and press VOL or MUTE key once. Your TV should ramp up or
down or MUTE. If Volume does not change, repeat steps 3 and 5, trying each code for
your brand until you find the correct code.
BLE Pairing
Connecting and Pairing
To pair the EVA remote control to the EVA BOX, perform the following steps:




The EVA box will be ready to pair either by physical button or automatic via software. EVA
box UI will display pairing user instructions.
Box will be put in an active scan mode, and look for RCU advertising to connect
If EVA BLE remote control is unpaired, the remote control will advertise and scan for a set
duration on every keypress.
Box will recognize remote and attempt to pair.
If the remote control does not have any pairing information, the remote will attempt to
advertise.
 EVA BLE remote control will send out advertisement on key press.
 Remote will continue to send these packets at regular intervals for a set duration.
 If the set amount of time has passed with no keypress remote will stop advertising.
 If key pressed during advertising, time out will not be extended.
For the Power key and EVA key the RCU will initiate indirect advertising instead of direct
advertising.
BLE Pairing Reset
To reset the pairing on the EVA remote control, perform the following steps:





User will simultaneously press 2 keys (Eva and Play) for at least 8 Sec.
Send a reset message to the box
RCU will enter pairing mode. It will transmit BLE advertisement and pair if return package
is received.
If a successful paring is made, the RCU will delete its past pairing info and store the new
pairing info.
If no successful pairing is made, the RCU will retain previous pairing info.
RESTORING FACTORY DEFAULT SETTINGS
To reset all the functions of the remote control to the factory default settings following these
steps:


User will simultaneously press 3 keys (Eva, Play, OK) for at least 10 seconds.
The remote will delete its paring information and return to factory default state.
Factory Reset Methodology:
RCU detects EVA/Play/OK key
combo.
Starts “Key_Hold Timer”
User holds keys for
Greater than 10 seconds
RCU deletes pairing info.
On any key press after, RCU
attempts to pair:
Starts sending ADV_INT packets
for PAIR_ADV_DURATION
(see Advertising and Scanning for
pairing process)
COMPLIANCE WITH FCC RULES AND REGULATIONS
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and if not used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase or decrease the separation between the equipment and receiver.
 Consult the dealer or an experienced remote control/ TV technician for help.
 It is strongly recommended that the TV be plugged into a separate wall outlet.
This equipment has been verified to comply with the limits for a Class B computing device,
pursuant to FCC Rules. The user is cautioned that changes and modifications made to the
equipment without the approval of manufacturer could void the user's authority to operate this
equipment.
FCC Authorization Label
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2 This device must accept any interference received, including
interference that may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : jmendez
Create Date                     : 2016:03:07 15:15:41-08:00
Modify Date                     : 2016:03:07 15:15:41-08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : Microsoft Word - EVA Quick Reference Guide Rev1.1.doc
Creator                         : jmendez
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Document ID                     : uuid:19ded8de-68cf-4752-b2a4-c9b6da59e50c
Instance ID                     : uuid:61c0fb59-2632-4153-86fa-8f796863a7ab
Page Count                      : 4

EXIF Metadata provided by EXIF.tools