Universal Electronics UR9964 OneForAll North America Kameleon 8 Device RF 2004 User Manual Part 3

Download:
Mirror Download [FCC.gov]
Document ID	469585
Application ID	OfEdfJNuFNX6MwCEBHVE1A==
Document Description	Users Manual Part 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	45.74kB (571756 bits)
Date Submitted	2004-09-16 00:00:00
Date Available	2004-09-16 00:00:00
Creation Date	2004-08-20 14:39:20
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2004-08-20 14:39:20
Document Title	Users Manual Part 3

OFA Kameleon wRF UG rev 3.fm Page 31 Monday, August 16, 2004 8:19 PM
USER’S GUIDE
5.
To save the macro, press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys appear again.
6.
Exit programming by pressing HOME once. The display returns to the
last-selected device menu screen.
7.
Now, if you aim the remote control at the devices selected in step 4 and
press the programmed Macro Key once, the TV turns on and tunes to
channel 3. Then the Cable Box turns on and tunes to channel 071.
PROGRAMMING A MASTER POWER MACRO IN THE HOME THEATER MODE
A macro can be programmed onto the POWER key to turn on or off as many
as seven Home Theater devices.
NOTE: This following example assumes the Home Theater system contains a
Satellite Receiver, a DVD Player, an Audio Receiver, and a TV.
1.
Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys
appear as SETUP flashes repeatedly.
2.
Press MACRO once.The Macro programming screen appears:
3.
Press POWER once.The last-selected
device menu screen, including HOME,
appears.
4.
Enter the macro sequence. For this
example, press CBL/SAT once, followed
by POWER once. Next, press DVD once,
followed by POWER once.Then press
AUDIO once, followed by POWER once.
Finally, press TV once, followed by
POWER once.
5.
To save the power macro, press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys appear again.
6.
Exit programming by pressing HOME once. The display returns to the
last-selected device menu screen.
7.
To test the power macro, first make sure all home theater devices
selected in step 4 are turned on. Aim the remote control at the devices
Using Macros
31
OFA Kameleon wRF UG rev 3.fm Page 32 Monday, August 16, 2004 8:19 PM
KAMELEON 8-DEVICE REMOTE WITH RF
and press the Home Theater key once, followed by POWER once.The
devices should turn off in this order: Satellite Receiver, DVD Player,
Audio Receiver, and TV.
To turn on the devices on again in the same order as above, press
POWER once.
CLEARING A MACRO
1.
Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys
appear as SETUP flashes repeatedly.
2.
Press MACRO once.The Macro programming screen appears:
3.
Select the Macro Key to be cleared and
press it once.The last-selected device
menu screen appears.
4.
Press and hold SETUP until the two
bottom IR segments flash twice. The
Program Keys appear again.
5.
To exit programming, press HOME
once.The display returns to the lastselected device menu screen.
USING LEARNING
The OFA Kameleon 8-Device Remote with RF includes a Learning feature so
you can add functions that are unique to your home entertainment devices
(e.g.,VCR Tracking Up or Down).However, there are some considerations:
LEARNING PRECAUTIONS
•
Your original remote controls must be in working order for learning to
work properly.
•
Learned keys are mode specific, so each one can store a unique function
for each mode.
•
Learned keys can be used in macros (see Using Macros on page 30).
32
Using Learning
OFA Kameleon wRF UG rev 3.fm Page 33 Monday, August 16, 2004 8:19 PM
USER’S GUIDE
•
Do not use the following keys for learning: Device Keys, M1~M4, SETUP,
FAV, SCROLL, PRESET, PVR VOD, or Record (•) Key.
•
Learning capacity is approximately 16 to 25 keys, depending on the code
being learned.
•
If both learned and keymoved functions are assigned to the same key, the
last programmed function is stored.
•
A learned function cannot be used as a source for Keymover (see Using
Keymover on page 38).
•
Certain device codes are not learnable including multi-frequency types,
some high frequency ones, and other unusual formats.
•
For optimum learning, avoid high levels of ambient light such as natural
sunlight or energy-efficient fluorescent lights.
NOTE: . Please have your original remote controls handy before programming
learning. Be sure to press each teaching key within 5 seconds of the previous entry.
Otherwise, the OFA Kameleon 8-Device Remote with RF exits programming mode.
PROGRAMMING A LEARNING KEY
1.
Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys appear as
SETUP flashes repeatedly.
2.
Press IR LRN once.The IR Learn programming screen appears:
3.
Using Learning
Press a device key once (i.e., AUX, CBL/SAT,
CD, TV, DVD, AUDIO, VCR, or PVR) to assign
a mode for learning.The selected device
menu screen, including HOME, appears.
33
OFA Kameleon wRF UG rev 3.fm Page 34 Monday, August 16, 2004 8:19 PM
KAMELEON 8-DEVICE REMOTE WITH RF
4.
Place the OFA Kameleon 8-Device Remote with RF head-to-head (about
2" apart) from your original remote control. Also locate the key (on your
original remote control) that will serve as the teaching function.
2"
5.
On the OFA Kameleon 8-Device Remote with RF, select and press a key
where the learned function will be stored.The IR segments display an
incoming animation, continue for three revolutions, and then the entire
display turns off.
After the display is off, press and hold the teaching key (on your original
remote control) until the display (on the OFA Kameleon 8-Device
Remote) turns on again.The two bottom IR segments flash twice when
the code is successfully captured.
NOTE: If the two bottom IR segments display one long flash, a learning
error has occurred.Try repeating this step again until a successful capture
occurs. If the function is still not captured, press HOME twice to
exit programming and review the “Learning Precautions” on the previous
page. If needed, also see “Troubleshooting” on page 57.After review, start
programming again at step 1.
6.
To learn other functions, repeat steps 3 through 5 as desired.
7.
To exit programming, press HOME twice. The display returns to the lastselected device menu screen.
DELETING A SINGLE LEARNING KEY
1.
34
Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys
appear as SETUP flashes repeatedly.
Using Learning
OFA Kameleon wRF UG rev 3.fm Page 35 Monday, August 16, 2004 8:19 PM
USER’S GUIDE
2.
Press IR DEL once.The IR Delete programming screen appears:
3.
Press a device key once (i.e., AUX, CBL/
SAT, CD, TV, DVD, AUDIO, VCR, or PVR)
for the mode where the learned key to
be deleted resides. The selected device
menu screen, including HOME, appears.
4.
Press the learned key to be deleted
twice. Upon deletion, the two bottom IR
segments flash twice as confirmation.
The Program Keys appear again.
6.
If desired, repeat steps 2 through 4 to delete another learned key.
7.
Exit programming by pressing HOME once. The display returns to the
last-selected device menu screen.
DELETING ALL LEARNED KEYS IN A SPECIFIC MODE.
1.
Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys
appear as SETUP flashes repeatedly
2.
Press IR DEL once.The IR Delete programming screen appears:
3.
Press a device key once (i.e.,AUX, CBL/
SAT,CD, TV,DVD, AUDIO, VCR, or PVR)
for the mode where the learned keys to
be deleted reside. The selected device
menu screen, including HOME, appears.
4.
Press the same device key (as in step 3) once. Upon deletion, the two
bottom IR segments flash twice as confirmation.The Program Keys
appear again.
5.
If desired, repeat steps 2 through 4 to delete other learned keys from
another mode.
6.
Exit programming by pressing HOME once. The display returns to the
last-selected device menu screen.
Using Learning
35
OFA Kameleon wRF UG rev 3.fm Page 36 Monday, August 16, 2004 8:19 PM
KAMELEON 8-DEVICE REMOTE WITH RF
REASSIGNING DEVICE KEYS
The OFA Kameleon 8-Device Remote with RF can be set to control a second
device. For example, to control a TV, a cable box, and two DVD players, you
can reassign the unused AUX key to operate the second DVD player as follows:
1.
Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys
appear as SETUP flashes repeatedly
2.
Press MODE once.The Mode Mover programming screen appears:
3.
For the source mode, press a device key
once (i.e., AUX, CBL/SAT, CD, TV, DVD,
AUDIO, VCR, or PVR). For this example,
press DVD once. The selected device
menu screen, including HOME, appears.
NOTE: Only one device can be assigned
to an unused device key at a time.
4.
For the destination mode, press a device key once (i.e., AUX, CBL/SAT,
CD, TV, DVD, AUDIO, VCR, or PVR). For this example, press AUX
once.Upon reassignment, the two bottom IR segments flash twice as
confirmation. The Program Keys appear again.
5.
For this example, the AUX key is now ready to be set up to control your
second DVD player. See Programming Device Control on page 15. If
desired, repeat steps 2 to 4 to reassign another device.
6.
Exit programming by pressing HOME once. The display returns to the
last-selected device menu screen.
USING KEYMOVER
The OFA Kameleon 8-Device Remote with RF includes a Keymover feature
that allows you to map (or copy) keys from one mode (i.e., source mode) to
another mode (i.e., destination mode).
NOTE: Do not use any of the Device Keys as a source or destination key.
Also, do not use POWER as a destination key.
36
Reassigning Device Keys
OFA Kameleon wRF UG rev 3.fm Page 37 Monday, August 16, 2004 8:19 PM
USER’S GUIDE
PROGRAMMING KEYMOVER
For example, if your DVD player does not have volume control, you can map
those keys (i.e., VOL!, VOL", and MUTE) from the TV mode to DVD mode:
1.
Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys
appear as SETUP flashes repeatedly
2.
Press OTHER once. The Other programming screen appears:
3.
Using the Number Keys, enter 9 9 4. The
two bottom IR segments flash twice.
4.
For the source mode, press a device key
once (i.e., AUX, CD, etc). For this example,
press TV once. The source device menu
screen, including HOME, appears.
5.
For the source key, press a key to be moved
once. For this example press VOL! once.
6.
For the destination mode, press a device
key once (i.e., AUX, CBL/SAT, CD, TV, DVD,
AUDIO, VCR, or PVR). For this example,
press DVD once. The selected destination
device menu screen, including HOME,
appears.
7.
For the destination key, press a key to be moved once. For this example
press VOL! once.Upon keymoving, the two bottom IR segments
flash twice as confirmation. The Program Keys appear again.
8.
Repeat steps 2 through 7 two more times to map the remaining volume
control keys, substituting VOL" and MUTE as source and destination
keys in steps 5 and 7.
9.
Exit programming by pressing HOME once. The display returns to the
last-selected device menu screen.
You can now use your OFA Kameleon 8-Device Remote with RF to control the
TV’s volume and mute in the DVD mode, as well as in the TV mode.
Using Keymover
37
OFA Kameleon wRF UG rev 3.fm Page 38 Monday, August 16, 2004 8:19 PM
KAMELEON 8-DEVICE REMOTE WITH RF
RESTORING A SINGLE KEYMOVED KEY
1.
Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys
appear as SETUP flashes repeatedly
2.
Press the destination mode once where the keymoved key is stored.
Then press OTHER once. The Other programming screen appears:
3.
Using the Number Keys, enter 9 9 4.The
two bottom IR segments flash twice.
4.
Press the destination mode once where
the keymoved key is stored.Then press
the destination key twice.Upon key
restoration, the two bottom IR
segments flash twice as
confirmation.The Program Keys appear
again.
5.
If desired, repeat steps 1 and 2 to restore
another key.
6.
Exit programming by pressing HOME
once. The display returns to the lastselected device menu screen.
RESTORING ALL KEYMOVED KEYS IN A SINGLE MODE
1.
Perform steps 1 through 3 of Programming Keymover, above.
2.
Press the destination mode twice where the keymoved keys are stored.
Upon key restoration, the two bottom IR segments flash twice as
confirmation. The Program Keys appear again.
3.
Exit programming by pressing HOME once. The display returns to the
last-selected device menu screen.
38
Using Keymover
OFA Kameleon wRF UG rev 3.fm Page 39 Monday, August 16, 2004 8:19 PM
USER’S GUIDE
USING CHANNEL SCAN
In the AUX, CBL/SAT, or TV mode, use the FAV key to start a 3-second scan of
all channels. If programmed, use the FAV key to scan only your favorite
channels to view a channel (see Programming Favorite Channel Scan below).
1.
Press AUX, CBL/SAT, or TV once.The two bottom IR segments flash once.
2.
Press FAV once.The IR segments display outgoing animation as each
channel is changed.
3.
•
If Favorite Channel Scan has been set up, scanning of favorite
channels starts and cycles through stored channels for 3 minutes
or until stopped by pressing any key.
•
If Favorite Channel Scan has not been set up, scanning starts with
the current channel, then proceeds to the next channel up and
cycles through all channels for 3 minutes or until stopped by
pressing any key.
To stop scanning channels at any time, press any key once.
PROGRAMMING FAVORITE CHANNEL SCAN
In the AUX, CBL/SAT, or TV mode, you can store a list of up to 10 favorite
channels, in any order, that are immediately scanned when FAV is pressed
(see Using Channel Scan above).
NOTE: . Favorite channels can only be programmed for one mode. After
programming, if FAV is pressed while in another mode, the remote control starts
a normal channel scan instead (if applicable to the selected device).
1.
Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys
appear as SETUP flashes repeatedly
2.
Select a Favorite Channel Mode by pressing AUX, CBL/SAT, or TV
once.The two bottom IR segments flash once as the selected device key
animates.
Using Channel Scan
39
OFA Kameleon wRF UG rev 3.fm Page 40 Monday, August 16, 2004 8:19 PM
KAMELEON 8-DEVICE REMOTE WITH RF
3.
Press OTHER once.The Other programming screen appears:
4.
Using the Number Keys, enter 9 9 6.
The two bottom IR segments flash
twice and display the Favorite Channel
programming screen.
NOTE: If the two bottom IR segments
display one long flash, an error has
occurred. Try repeating this step.
5.
Using the Number Keys, enter a favorite
channel number (e.g., 0 1 2). Then
press SETUP once.The two bottom IR
segments flash three times confirming
your entry.
NOTE: If the original remote control required pressing an Enter key to
change the channel, also press the ENTER key after the channel number
(e.g., 0 1 2 ENTER).
6.
If desired, repeat step 5 for each channel to be stored, up to a total of 10
channels.
NOTE: After storing 10 channels, the remote control exits the Favorite
Channel programming screen and again displays the Program Keys.
7.
To exit programming with fewer than 10 favorite channels stored, press
and hold SETUP until the two bottom IR segments flash twice and then
press HOME once.The display returns to the last-selected device menu
screen.
RESTORING FACTORY DEFAULT SETTINGS
The OFA Kameleon 8-Device Remote with RF includes an Setup Code
Reset program.You can use it to restore all your programmed codes to
factory settings and delete all custom programming.
IMPORTANT: Executing this program erases all code settings and all
custom settings for Home Theater, Macros, Learned Keys, Reassigned
Device Keys, Keymoved Keys, Favorite Channels, and all device settings.
40
Restoring Factory Default Settings
OFA Kameleon wRF UG rev 3.fm Page 41 Monday, August 16, 2004 8:19 PM
USER’S GUIDE
1.
Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys
appear as SETUP flashes repeatedly
2.
Press OTHER once.The Other programming screen appears:
3.
Using the Number Keys, enter 9 7 7. The
two bottom IR segments flash twice
pause and flash twice again to confirm
the unit has been restored to factory
default settings.
4.
Exit programming by pressing HOME
once. The display returns to the lastselected device menu screen.
CLEARING ALL CUSTOM PROGRAMMING
The OFA Kameleon 8-Device Remote with RF contains a Custom
Programming Reset program.You can use it to remove all custom
programming, except your setup codes and reassigned device keys.
IMPORTANT: Executing this program erases all custom settings for Home
Theater, Macros, Learned Keys, Keymoved Keys, and Favorite Channels.
1.
Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys
appear as SETUP flashes repeatedly
Clearing All Custom Programming
41
OFA Kameleon wRF UG rev 3.fm Page 42 Monday, August 16, 2004 8:19 PM
KAMELEON 8-DEVICE REMOTE
2.
Press OTHER once.The Other programming screen appears:
3.
Using the Number Keys, enter 9 8
0.The two bottom IR segments flash
twice pause and flash twice again to
confirm the unit has been restored to
factory default settings.
4.
Exit programming by pressing HOME
once. The display returns to the lastselected device menu screen.
MANUFACTURER’S CODES
SETUP CODES FOR AUDIO
AMPLIFIERS
GE
JVC
Optimus
Realistic
Soundesign
Victor
Wards
Yamaha
0078
0331
0395
0395
0078
0331
0078
0354
SETUP CODES FOR AUDIO
RECEIVERS
ADC
Aiwa
Alco
Anam
Apex Digital
Audiotronic
42
0531
0158, 0189, 1388,
0121, 1089
1390
1609
1257
1189
Audiovox
Bose
Capetronic
Carver
Coby
Curtis
Denon
Fisher
Glory Horse
Harman/Kardon
Integra
JBL
JVC
Kenwood
KLH
Koss
Linn
Magnavox
1390
1229
0531
1189, 0189, 1089
1263, 1389
1263
1360
1409
1263
0110, 0189
1298, 0135
0110, 1306
0074, 1263, 1374
1313, 1570, 1569,
1027, 0186
1390
1366
0189
1189, 1269, 0189,
1089, 0531
Manufacturer’s Codes
OFA Kameleon wRF UG rev 3.fm Page 43 Monday, August 16, 2004 8:19 PM
USER’S GUIDE
Marantz
MCS
Musicmagic
Norcent
Onkyo
Optimus
Oritron
Panasonic
Philips
Pioneer
Polk Audio
Proscan
Quasar
RadioShack
RCA
Samsung
Sansui
Sharp
Sharper Image
Sony
Soundesign
Stereophonics
Sunfire
Teac
Technics
Thorens
Venturer
Victor
Wards
Yamaha
1189, 1269, 0039,
0189, 1089
0039
1089
1389
1298, 0842, 0135
1023, 0670, 0531,
0186, 0797
1380, 1366
1518, 0039
1189, 1269, 0189,
1089
1023, 0531, 1384,
0150, 0014, 0630
0189
1254
0039
1263
1023, 1609, 1254,
0531, 1390
1295
0189, 1089
0186
1416, 1549, 1385,
1411, 1546, 1723,
1263, 1410,1545,
1556, 0797, 1409
1058, 1258, 0158,
1758, 1158, 1658,
1558
0670
1023
1313
1390
1308, 1518, 0039
1189
1390
0074
0158, 0189, 0014
0176, 1176, 0186,
1375
Manufacturer’s Codes
SETUP CODES FOR CABLE BOXES
ABC
Americast
Bell & Howell
Bell South
Director
General Instrument
GoldStar
Hamlin
Jerrold
Memorex
Motorola
Pace
Panasonic
Paragon
Philips
Pioneer
Pulsar
Quasar
Regal
Runco
Samsung
Scientific Atlanta
Sony
Starcom
Supercable
Torx
Toshiba
Zenith
0003, 0008, 0014
0899
0014
0899
0476
0476, 0276, 0003
0144
0009, 0273
0476, 0276, 0003,
0014
0000
0476, 0276
0237
0000, 0107
0000
0305, 0317
0877, 1877, 0144,
0533
0000
0000
0279, 0273
0000
0144
0877, 1877, 0477,
0008
1006
0003
0276
0003
0000
0000, 0525, 0899
SETUP CODES FOR CD PLAYERS
Aiwa
0157
Burmester
0420
California Audio Labs 0029
Carver
0157
Denon
0873
DKK
0000
DMX Electronics
0157
Garrard
0420
43
OFA Kameleon wRF UG rev 3.fm Page 44 Monday, August 16, 2004 8:19 PM
KAMELEON 8-DEVICE REMOTE
Genexxa
Harman/Kardon
Hitachi
JVC
Kenwood
KLH
Krell
Linn
Magnavox
Marantz
MCS
Miro
Mission
MTC
NSM
Onkyo
Optimus
Panasonic
Parasound
Philips
Pioneer
Polk Audio
Proton
QED
Quad
Quasar
RCA
Realistic
Rotel
SAE
Sansui
Sharp
Sonic Frontiers
Sony
TAG McLaren
Tascam
TDK
Teac
Technics
Victor
Wards
44
0032
0157
0032
0072
0681, 0626, 0028
1318
0157
0157
0157
0626, 0029, 0157
0029
0000
0157
0420
0157
0868
1063, 0000, 0032,
0420
0029
0420
0626, 0157
1063, 1062, 0032
0157
0157
0157
0157
0029
1062, 0032, 0420
0420
0157, 0420
0157
0157
0861
0157
0490, 0000, 0100
0157
0420
1208
0420
0029
0072
0157
Yamaha
Zonda
0888, 0036, 1292
0157
SETUP CODES FOR DVD PLAYERS
Aiwa
Allegro
AMW
Apex Digital
Blaupunkt
Blue Parade
Broksonic
CineVision
Daewoo
Denon
DVD2000
Emerson
Enterprise
Fisher
Funai
GE
Go Video
Greenhill
Harman/Kardon
Hitachi
Hiteker
Initial
Integra
JBL
JVC
Kenwood
KLH
Koss
Lasonic
Magnavox
Marantz
Memorex
Microsoft
Mintek
Mitsubishi
Nesa
0641
0869
0872
0672, 0717, 0755,
0796, 1100, 0795,
0830, 0794,0797
0717
0571
0868, 0695
0876, 0869
0784
0490, 0634
0521
0591, 0821, 0675
0591
0670
0675
0522, 0815, 0717
0744, 0715, 0783
0717
0702, 0582
0573, 0664
0672
0717
0627
0702
0558, 0623, 0867
0490, 0534, 0682
0717
0651
0798
0503, 0675
0539
0695
0522
0717
1521, 0521
0717
Manufacturer’s Codes
OFA Kameleon wRF UG rev 3.fm Page 45 Monday, August 16, 2004 8:19 PM
USER’S GUIDE
Norcent
Onkyo
Oritron
Panasonic
Philips
Pioneer
Polk Audio
Proscan
Qwestar
RCA
Rio
Rotel
Sampo
Samsung
Sansui
Sanyo
Sharp
Sharper Image
Sherwood
Shinsonic
Sonic Blue
Sony
Sylvania
Symphonic
Technics
Theta Digital
Toshiba
Tredex
Urban Concepts
Xbox
Yamaha
Zenith
0872
0503, 0627
0651
0490, 0632, 1490,
1462, 1362, 1762
0503, 0539, 0646,
0854
0525, 0571, 0632
0539
0522
0651
0522, 0571, 0717,
0822
0869
0623
0698
0490, 0573, 0820
0695
0873, 0695, 0670
0630, 0752
1117, 1112, 1995
0633
0533
0869
0533, 0864
0821, 0675
0675
0490
0571
0503, 0695, 1045
0799
0503
0522
0490, 0539, 0545,
0817
0503, 0591, 0869
SETUP CODES FOR DVD PLAYER/
PVR COMBOS
Panasonic
RCA
0490
0522
Manufacturer’s Codes
SETUP CODES FOR DVD PLAYER/
VCR COMBOS (DVD CODES)
Allegro
CineVision
Go Video
Hitachi
JVC
Memorex
Panasonic
RCA
Samsung
Sansui
Sanyo
Sharp
Sony
Sylvania
Symphonic
Toshiba
Zenith
0869
0869
0744, 0715
0664
0867
0695
1762
0822
0820
0695
0873
0630
0864
0675
0675
0503
0869
SETUP CODES FOR DVD PLAYER/
VCR COMBOS (VCR CODES)
Hitachi
RCA
Sanyo
Sharp
Sylvania
Symphonic
0000
0060
0104
0848
0000
0000
SETUP CODES FOR HOME
AUTOMATION
GE
Lasko
One For All
RadioShack
Security System
Sharper Image
Universal X10
X10
0240
0846
0167
0240
0167
0846
0167
0167
45

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2004:08:20 14:39:20
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2004:08:20 14:39:20-07:00
Page Count                      : 15

EXIF Metadata provided by EXIF.tools