Universal Scientific UNA850 UNA 850 module User Manual UNA 850 UserMan

Download:
Mirror Download [FCC.gov]
Document ID	1805279
Application ID	upkdTQqzIJfWeRL8MEsmSQ==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	94.91kB (1186330 bits)
Date Submitted	2012-10-01 00:00:00
Date Available	2013-03-30 00:00:00
Creation Date	2017-10-29 23:51:15
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-29 23:51:15
Document Title	UNA_850_UserMan
Document Creator	PDFCreator Version 1.2.2
Document Author:	Admin

Doc. Title
Originator
User Guide for UNA Module and
Socket EVB (V23)
Max Shu
Date
2012/09/07
Version
DVT V23
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
Revision Record
Version
1.0
1.1
Revise content
New release
1.Add EVB test point pin define
2. Identification of PCB version
Date
2012-08-10
2012-09-07
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
Content
1.
FCC Regulations............................................................................................ 3
2.
RF Exposure Information.............................................................................. 4
3.
Information of Installed Module.................................................................... 5
4.
Guide to Use .................................................................................................. 6
1)
Function of Socket EVB V23 and Identification of PCB version................ 6
2)
Configure the Socket EVB............................................................................ 8
3)
Insert the SIM card..................................................................................... 11
4)
Place the Module ....................................................................................... 12
5)
Connect the antenna .................................................................................. 13
6)
Download setting........................................................................................ 14
7)
Manual control module sleep mode:........................................................... 15
8)
Apply External power to module................................................................. 16
9)
Measure current of module setting ............................................................. 17
10) Connect extend cable for line in & line out :................................................ 18
11) EVB test point pin define ............................................................................ 19
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
1. FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiated
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
2. RF Exposure Information
This Modular Approval is limited to OEM installation for mobile and fixed
applications only. The antenna installation and operating configurations of this
transmitter, including any applicable source-based time-averaging duty factor,
antenna gain and cable loss must satisfy MPE categorical Exclusion
Requirements of §2.1091.
The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons, must not be collocated
or operating in conjunction with any other antenna or transmitter, except in
accordance with FCC multi-transmitter product procedures.
The end user has no manual instructions to remove or install the device and a
separate approval is required for all other operating configurations, including
portable configurations with respect to 2.1093 and different antenna
configurations.
Maximum antenna gain allowed for use with this device is 2 dBi.
When the module is installed in the host device, the FCC ID label must be
visible through a window on the final device or it must be visible when an
access panel, door or cover is easily re-moved. If not, a second label must be
placed on the outside of the final device that contains the following text:
“Contains FCC ID: IXM-UNA850”.
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
3. Information of Installed Module
Module Name
UNA_850
FCC ID
IXM-UNA850
HW Version
V2.3
SW Version
V3.1a
GSM Band
GSM 850, E-GSM 900, DCS 1800, PCS 1900
UMTS Band
FDD I, FDD V
GSM Feature
Release 99
GPRS
Release 6, Multi-slot class 12
EDGE
Release 6, Multi-slot class 12
UMTS Feature
HSDPA, HSUPA (UMTS Release 6)
AT Command
3GPP TS 27.007, 27.005
SIM/USIM
Support 3V and 1.8V
Interface
USB 2.0 high speed
Operating Temperature
Frequency Stability covers operating
temperature range of -20° to +50°C
Operating Voltage
3.3 ~ 4.2V
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
4. Guide to Use
1) Function of Socket EVB V23 and Identification of PCB version
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
Function
Description
Available
USB PORT
Connect to Host PC and Download Firmware
Power supply IN
Optional Connect to external Power supply input
UART1
Download Firmware
RF SMA connector
Connect to external Antenna
SIM card
Connect to SIM card
LINE IN
Connect to Line in
LINE OUT
Connect to Line out
J51
MP test connector
J52
MP test connector
Unavailable
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
2) Configure the Socket EVB
Default JUMP Setting :
Component reference
Function
Jump 1-2
J40
Enable VBAT_M. (Default) R808 short.
No, Note1
J41
Enable VBAT_M1.(Default) R809 short.
No, Note2
Note1 :For current measurement of VBAT_M: de-solder R808. Close J40
Note2 :For current measurement of VBAT_M1: de-solder R809. Close J41
Component reference
J42
Component reference
Function
Jump 1-2
(Default) Output +3.3V for module
No
Output +4.2V for module
Yes
Function
Jump 1-2
J45
USB_EN high level input to turn on Module
No
J53
PWRKEY high level input to turn on Module
No
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
Download Key :
Component reference
J31
Function
Enable Download through USB
Jump 1-2
No, Note3
Note 3: To enable download mode, Please close J31 and refer to “ Use Data Card Tool To
Update Image File Steps-V1.1-2012.07.18.pdf”
Jump setting for normal mode .
Component reference JUMP 1-2
J40
NO
J41
NO
J42
NO
J31
NO
J45
NO
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
J53
NO
Jump setting for Download mode :
Component reference JUMP 1-2
J40
NO
J41
NO
J42
NO
J31
YES
J45
NO
J53
NO
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
3) Insert the SIM card
To use a UNA module, you need to install:
a. A live SIM card (with an active account), or
b. A test SIM card for use with call box (for example ,an Agilent 8960 ..)
To install the SIM card:
a. Place the Socket EVB face-up(as shown) – the SIM slot is on right side.
b. Note the location of the notched corner of the card in the following image.
c. Inset the SIM card into the slot.
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
4) Place the Module
After inserting the SIM card, insert the module:
a. Place the Socket EVB face-up(as shown) – the socket is in the center.
b. Notice the pin 1 location on the socket.
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
5) Connect the antenna
After installing the Module ,connect the supplied antenna to the EVB
a. Place the Socket EVB face-up. The antenna connector on the bottom side.
b. Connect the antenna to the adapter.
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
6) Download setting
a. Plug in the Jump.
b.Connect the USB cable between EVB & PC.
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
7) Manual control module sleep mode:
Component reference
J45
Function
USB_EN input for sleep / normal mode
a. Follow UNA IO application design notes
b. Plug in the Jump from J45 before use manual control.
c. Connect J51,16pin to control module .
J51,16pin:
Hi(3.3~5.0V): Normal mode ;
Low(0~0.3V): Sleep mode
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
8) Apply External power to module
To use external power for module, please follow the steps to setting.
a. Red line VCC connect to J38.
b. Black line GND connect to J39.
c. De-solder the open pad R808.(yellow circle)
d. USB cable connect to Host PC.
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
9) Measure current of module setting
a. De-solder the open pad R809.(yellow circle)
b. Please follow the photo to setup the current meter.
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
10) Connect extend cable for line in & line out :
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
11) EVB test point pin define
1. J52 Pin define
Pin number Pin name
GND
DAICLK
11
13
15
DAIPCMOUT
SCL
SDA
Reserve Pin
URXD2
URXD1
Pin number Pin name
VBAT_M1
DAISYNC
10
12
14
16
DAIPCMIN
DAIRST
Reserve Pin
Reserve Pin
UTXD2
UTXD1
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
2.J51 Pin define
Pin number Pin name
GND
Wake
11
13
15
#EINT9
GPIO2
GPIO0
Reserve Pin
KROW0
Reserve Pin
Pin number Pin name
AP_Ready
#W_Disable
10
12
14
16
ID
GPIO1
#Sys_config
Reserve Pin
KCOL6
Reserve Pin
(Note4)
(Note5)
Note4: Default- open (900 module);If use 850 module, this pin to pull low(1kΩ
Ω).
Note5: enable "USB+UART "mode- Default- open (USB only);If use”USB+UART” mode,
this pin to pull low(1kΩ
Ω).
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : GPL Ghostscript 9.02
Keywords                        : 
Modify Date                     : 2012:09:26 19:33:40+08:00
Create Date                     : 2012:09:25 20:49:21+08:00
Creator Tool                    : PDFCreator Version 1.2.2
Metadata Date                   : 2012:09:26 19:33:40+08:00
Document ID                     : f4a7644d-096a-11e2-0000-921201863e96
Instance ID                     : uuid:2d85751b-daae-4930-b267-d7dc12aa7947
Format                          : application/pdf
Title                           : UNA_850_UserMan
Creator                         : Admin
Description                     : 
Description (x-repair)          : 
Page Count                      : 21
Author                          : Admin
Subject                         : 

EXIF Metadata provided by EXIF.tools