VALEO Telematik und Akustik BTHFCK2 Bluetooth Handsfree Carkit User Manual CHRY OM Contenta pu

Download:
Mirror Download [FCC.gov]
Document ID	903057
Application ID	uP/VQbioFjaxxrQ3CdqHUw==
Document Description	User Manual II
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.73kB (309109 bits)
Date Submitted	2008-02-18 00:00:00
Date Available	2008-02-18 00:00:00
Creation Date	2008-02-12 12:12:48
Producing Software	Acrobat Distiller Command 3.01 for AIX 4.1.1 and later (RS6000)
Document Lastmod	0000-00-00 00:00:00
Document Title	CHRY OM (Contenta pu
Document Creator	XyEnterprise XPP 7.3C.1 Patch #5

JOBNAME: CHRY OM (Contenta pu PAGE: 1 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
HANDS-FREE COMMUNICATION (UConnectT) —
IF EQUIPPED
NOTE: The sales code RER and REU radios contain an
integrated Hands-Free Communication (UConnectt)
system. Refer to your “Navigation User’s Manual” for
UConnectt system operating instructions for these radios.
UConnectt is a voice-activated, hands-free, in-vehicle
communications system. UConnectt allows you to dial a
phone number with your cellular phone using simple
voice commands (e.g., 9Call” { “Mike” {”Work9 or 9Dial”
{ “248-555-12129). Your cellular phone’s audio is transmitted through your vehicle’s audio system; the system
will automatically mute your radio when using the
UConnectt system.
NOTE: The UConnectt system requires a cellular phone
equipped with the Bluetootht 9Hands-Free Profile,9 Version 0.96 or higher. See the UConnectt website for
supported phones.
NOTE: For UConnectt customer support, visit the
following websites:
• www.chrysler.com/uconnect
• www.dodge.com/uconnect
• www.jeep.com/uconnect
• or call 1–877–855–8400
UConnectt allows you to transfer calls between the
system and your cellular phone as you enter or exit your
vehicle and enables you to mute the system’s microphone
for private conversation.
The UConnectt system is driven through your
Bluetootht “Hands-Free profile” cellular phone.
JOBNAME: CHRY OM (Contenta pu PAGE: 2 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
UConnectt features Bluetootht technology - the global
standard that enables different electronic devices to connect to each other without wires or a docking station, so
UConnectt works no matter where you stow your cellular phone (be it your purse, pocket, or briefcase), as long
as your phone is turned on and has been paired to the
vehicle’s UConnectt system. The UConnectt system
allows up to seven cellular phones to be linked to the
system. Only one linked (or paired) cellular phone can be
used with the system at a time. The system is available in
English, Spanish, or French languages.
Phone Button
The rearview mirror contains the microphone
for the system (depending on the type of
mirror and radio equipped), and either the
radio or the mirror has the two control buttons
(PHONE Button and VOICE RECOGNITION button)
that will enable you to access the system.
Voice Recognition Button
Actual button location may vary with radio.
The individual buttons are described in the
“Operation” section.
The UConnectt system can be used with any Hands-Free
Profile certified Bluetootht cellular phone. See the
UConnectt website for supported phones. If your cellular phone supports a different profile (e.g., Headset
Profile) you may not be able to use any UConnectt
features. Refer to your cellular service provider or the
phone manufacturer for details.
The UConnectt system is fully integrated with the vehicle’s audio system. The volume of the UConnectt system
can be adjusted either from the radio volume control
knob or from the steering wheel radio control (right
switch), if so equipped.
JOBNAME: CHRY OM (Contenta pu PAGE: 3 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
The radio display will be used for visual prompts from
the UConnectt system such as 9CELL9 or caller ID on
certain radios.
Operation
Voice commands can be used to operate the UConnectt
system and to navigate through the UConnectt menu
structure. Voice commands are required after most
UConnectt system prompts. You will be prompted for a
specific command and then guided through the available
options.
• Prior to giving a voice command, one must wait for
the beep, which follows the 9Ready9 prompt or another
prompt.
• For certain operations, compound commands can be
used. For example, instead of saying 9Setup9 and then
9Phone Pairing,9 the following compound command
can be said: 9Setup Phone Pairing.9
• For each feature explanation in this section, only the
combined form of the voice command is given. You
can also break the commands into parts and say each
part of the command when you are asked for it. For
example, you can use the combined form voice command 9Phonebook New Entry,9 or you can break the
combined form command into two voice commands:
9Phonebook9 and 9New Entry.9 Please remember, the
UConnectt system works best when you talk in a
normal conversational tone, as if speaking to someone
sitting a few feet/meters away from you.
Voice Command Tree
Refer to “Voice Tree” in this section.
Help Command
If you need assistance at any prompt, or if you want to
know your options at any prompt, say 9Help9 following
the beep. The UConnectt system will play all the options
at any prompt if you ask for help.
JOBNAME: CHRY OM (Contenta pu PAGE: 4 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
To activate the UConnectt system from idle, simply press
the PHONE button and follow the audible prompts for
directions. All UConnectt system sessions begin with a
press of the PHONE button on the radio control head.
Cancel Command
At any prompt, after the beep, you can say 9Cancel9 and
you will be returned to the main menu. However, in a
few instances the system will take you back to the
previous menu.
Pair (Link) UConnectt System to a Cellular Phone
To begin using your UConnectt system, you must pair
your compatible Bluetootht enabled cellular phone.
To complete the pairing process, you will need to reference your cellular phone Owner’s Manual. The
UConnectt website may also provide detailed instructions for pairing.
The following are general phone to UConnectt system
pairing instructions:
• Press the PHONE button to begin.
• After the 9Ready9 prompt and the following beep, say
9Setup Phone Pairing.9
• When prompted, after the beep, say 9Pair a Phone9 and
follow the audible prompts.
• You will be asked to say a four-digit Personal Identification Number (PIN), which you will later need to
enter into your cellular phone. You can enter any
four-digit PIN. You will not need to remember this PIN
after the initial pairing process.
• For identification purposes, you will be prompted to
give the UConnectt system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
JOBNAME: CHRY OM (Contenta pu PAGE: 5 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
• You will then be asked to give your cellular phone a
priority level between 1 and 7, with 1 being the highest
priority. You can pair up to seven cellular phones to
your UConnectt system. However, at any given time,
only one cellular phone can be in use, connected to
your UConnectt system. The priority allows the
UConnectt system to know which cellular phone to
use if multiple cellular phones are in the vehicle at the
same time. For example, if priority 3 and priority 5
phones are present in the vehicle, the UConnectt
system will use the priority 3 cellular phone when you
make a call. You can select to use a lower priority
cellular phone at any time (refer to 9Advanced Phone
Connectivity9 in this section).
Dial by Saying a Number
• Press the PHONE button to begin.
• After the 9Ready9 prompt and the following beep, say
9Dial.9
• The system will prompt you to say the number you
want to call.
• For example, you can say 9234-567-89019.
• The UConnectt system will confirm the phone number and then dial. The number will appear in the
display of certain radios.
Call by Saying a Name
• Press the PHONE button to begin.
• After the 9Ready9 prompt and the following beep, say
“Call.9
• The system will prompt you to say the name of the
person you want to call.
• After the 9Ready9 prompt and the following beep, say
the name of the person you want to call. For example,
you can say 9John Doe,9 where John Doe is a previously stored name entry in the UConnectt phonebook
JOBNAME: CHRY OM (Contenta pu PAGE: 6 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
or downloaded phonebook. To learn how to store a
name in the phonebook, refer to 9Add Names to Your
UConnectt Phonebook,9 in the phonebook.
• The UConnectt system will confirm the name and
then dial the corresponding phone number, which
may appear in the display of certain radios.
Add Names to Your UConnectt Phonebook
NOTE: Adding names to the UConnectt phonebook is
recommended when the vehicle is not in motion.
• Press the PHONE button to begin.
• After the 9Ready9 prompt and the following beep, say
9Phonebook New Entry.9
• When prompted, say the name of the new entry. Use of
long names helps the voice recognition and it is
recommended. For example, say 9Robert Smith9 or
9Robert9 instead of 9Bob.9
• When prompted, enter the number designation (e.g.,
9Home,9 9Work,9 9Mobile,9 or 9Pager9). This will allow
you to store multiple numbers for each phonebook
entry, if desired.
• When prompted, recite the phone number for the
phonebook entry that you are adding.
After you are finished adding an entry into the phonebook, you will be given the opportunity to add more
phone numbers to the current entry or to return to the
main menu.
The UConnectt system will allow you to enter up to 32
names in the phonebook with each name having up to
four associated phone numbers and designations. Each
language has a separate 32-name phonebook accessible
only in that language. In addition, if equipped and
supported by your phone, UConnectt automatically
downloads mobile phone’s phonebook.
JOBNAME: CHRY OM (Contenta pu PAGE: 7 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
Phonebook Download – Automatic Phonebook
transfer from Mobile phone
If equipped and specifically supported by your phone,
UConnectt automatically downloads names (text names)
and number entries from the mobile phone’s phonebook.
Specific Bluetootht Phones with Phone Book Access
Profile may support this feature. See UConnectt website
for supported phones.
• To call a name from downloaded (or UConnectt)
Phonebook, follow the procedure in “Call by Saying a
Name” section.
• Automatic download and update, if supported, begins
as soon as the phone Bluetootht wireless connection is
made to the UConnectt. For example, after you start
the vehicle.
• Maximum of 1000 entries per phone will be downloaded and updated every time a phone is connected
to the UConnectt.
• Depending on the maximum number of entries downloaded, there may be a short delay before the latest
downloaded names can be used. Until then, if available, previous downloaded phonebook is available for
use.
• Only the phonebook of the currently connected mobile
phone is accessible.
• Only the Mobile phone’s phonebook is downloaded.
SIM card phonebook is not part of the Mobile phonebook.
• This downloaded phonebook cannot be edited or
deleted on the UConnectt. These can only be edited on
the mobile phone. The changes are transferred and
updated to UConnectt on the next phone connection.
Phonebook Download — Single Entry
If equipped and supported by your phone, UConnectt
allows the user to download entries from their phone via
JOBNAME: CHRY OM (Contenta pu PAGE: 8 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
Bluetootht. To use this feature, press the PHONE button
and say “Phonebook Download.” The system prompts,
“Ready to accept “V” card entry via Bluetootht…” The
system is now ready to accept phonebook entries from
your phone using the Bluetootht Object Exchange Profile
(OBEX). Please see your phone Owner’s Manual for
specific instructions on how to send these entries from
your phone.
NOTE:
• The phone handset must support Bluetootht OBEX
transfers of phonebook entries to use this feature.
• Some phones cannot send phonebook entries if they
are already connected to any system via Bluetootht,
and you may see a message on the phone display that
the Bluetootht link is busy. In this case, the user must
first disconnect or drop the Bluetootht connection to
the UConnectt system, and then send the address
book entry via Bluetootht. Please see your phone
Owner’s Manual for specific instructions on how to
drop the Bluetootht connection.
• If the phonebook entry is longer than 24 characters, it
will only use the first 24 characters.
Edit UConnectt Phonebook Entries
NOTE:
• Editing names in the phonebook is recommended
when the vehicle is not in motion.
• Automatic downloaded phonebook entries cannot be
deleted or edited.
• Press the PHONE button to begin.
• After the 9Ready9 prompt and the following beep, say
9Phonebook Edit.9
• You will then be asked for the name of the phonebook
entry that you wish to edit.
JOBNAME: CHRY OM (Contenta pu PAGE: 9 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
• Next, choose the number designation (home, work,
mobile, or pager) that you wish to edit.
• When prompted, recite the new phone number for the
phonebook entry that you are editing.
After you are finished editing an entry in the phonebook,
you will be given the opportunity to edit another entry in
the phonebook, call the number you just edited, or return
to the main menu.
9Phonebook Edit9 can be used to add another phone
number to a name entry that already exists in the
phonebook. For example, the entry John Doe may have a
mobile and a home number, but you can add ”John
Doe’s” work number later using the 9Phonebook Edit9
feature.
Delete UConnectt Phonebook Entry
NOTE: Editing phonebook entries is recommended
when the vehicle is not in motion.
• Press the PHONE button to begin.
• After the 9Ready9 prompt and the following beep, say
9Phonebook Delete.9
• After you enter the Phonebook Delete menu, you will
then be asked for the name of the entry that you wish
to delete. You can either say the name of a phonebook
entry that you wish to delete or you can say 9List
Names9 to hear a list of the entries in the phonebook
from which you choose. To select one of the entries
from the list, press the “Voice Recognition” button
while the UConnectt system is playing the desired
entry and say 9Delete.9
• After you enter the name, the UConnectt system will
ask you which designation you wish to delete: home,
work, mobile, pager, or all. Say the designation you
wish to delete.
JOBNAME: CHRY OM (Contenta pu PAGE: 10 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
10
• Note that only the phonebook entry in the current
language is deleted.
• Automatic downloaded phonebook entries cannot be
deleted or edited.
• Automatic downloaded phonebook entries cannot be
deleted or edited.
List All Names in the UConnectt Phonebook
Delete/Erase “All” UConnectt Phonebook Entries
• After the 9Ready9 prompt and the following beep, say
9Phonebook List Names.9
• Press the PHONE button to begin.
• After the 9Ready9 prompt and the following beep, say
9Phonebook Erase All.9
• The UConnectt system will ask you to verify that you
wish to delete all the entries from the phonebook.
• After confirmation, the phonebook entries will be
deleted.
• Note that only the phonebook in the current language
is deleted.
• Press the PHONE button to begin.
• The UConnectt system will play the names of all the
phonebook entries, including the downloaded phonebook entries, if available.
• To call one of the names in the list, press the “Voice
Recognition” button during the playing of the desired
name, and say 9Call.9
NOTE: The user can also exercise 9Edit9 or 9Delete9
operations at this point.
• The UConnectt system will then prompt you as to the
number designation you wish to call.
JOBNAME: CHRY OM (Contenta pu PAGE: 11 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
11
• The selected number will be dialed.
Phone Call Features
The following features can be accessed through the
UConnectt system if the feature(s) are available on your
cellular service plan. For example, if your cellular service
plan provides three-way calling, this feature can be
accessed through the UConnectt system. Check with
your cellular service provider for the features that you
have.
Answer or Reject an Incoming Call - No Call
Currently in Progress
When you receive a call on your cellular phone, the
UConnectt system will interrupt the vehicle audio system, if on, and will ask if you would like to answer the
call. Press the PHONE button to accept the call. To reject
the call, press and hold the PHONE button until you hear
a single beep, indicating that the incoming call was
rejected.
Answer or Reject an Incoming Call - Call
Currently in Progress
If a call is currently in progress and you have another
incoming call, you will hear the same network tones for
call waiting that you normally hear when using your cell
phone. Press the PHONE button to place the current call
on hold and answer the incoming call.
NOTE: The UConnectt system compatible phones in
the market today do not support rejecting an incoming
call when another call is in progress. Therefore, the user
can only answer an incoming call or ignore it.
Making a Second Call While Current Call in
Progress
To make a second call while you are currently on a call,
press the “Voice Recognition” button and say 9Dial9 or
9Call9 followed by the phone number or phonebook entry
you wish to call. The first call will be on hold while the
second call is in progress. To go back to the first call, refer
JOBNAME: CHRY OM (Contenta pu PAGE: 12 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
12
to 9Toggling Between Calls9 in this section. To combine
two calls, refer to 9Conference Call9 in this section.
Place/Retrieve a Call From Hold
To put a call on hold, press the PHONE button until you
hear a single beep. This indicates that the call is on hold.
To bring the call back from hold, press and hold the
PHONE button until you hear a single beep.
Toggling Between Calls
If two calls are in progress (one active and one on hold),
press the PHONE button until you hear a single beep,
indicating that the active and hold status of the two calls
have switched. Only one call can be placed on hold at one
time.
Conference Call
When two calls are in progress (one active and one on
hold), press and hold the PHONE button until you hear
a double beep indicating that the two calls have been
joined into one conference call.
Three-Way Calling
To initiate three-way calling, press the “Voice Recognition” button while a call is in progress, and make a
second phone call, as described under 9Making a Second
Call While Current Call in Progress.9 After the second call
has established, press and hold the PHONE button until
you hear a double beep, indicating that the two calls have
been joined into one conference call.
Call Termination
To end a call in progress, momentarily press the PHONE
button. Only the active call(s) will be terminated and if
there is a call on hold, it will become the new active call.
If the active call is terminated by the far end, a call on
hold may not become active automatically. This is cell
phone-dependent. To bring the call back from hold, press
and hold the PHONE button until you hear a single beep.
Redial
• Press the PHONE button to begin.
JOBNAME: CHRY OM (Contenta pu PAGE: 13 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
13
• After the 9Ready9 prompt and the following beep, say
9Redial.9
• The UConnectt system will call the last number that
was dialed from your cellular phone.
NOTE: This may not be the last number dialed from the
UConnectt system.
Call Continuation
Call continuation is the progression of a phone call on the
UConnectt system after the vehicle ignition key has been
switched to OFF. Call continuation functionality available on the vehicle can be any one of three types:
• After the ignition key is switched to OFF, a call can
continue on the UConnectt system either until the call
ends, or until the vehicle battery condition dictates
cessation of the call on the UConnectt system and
transfer of the call to the mobile phone.
• After the ignition key is switched to OFF, a call can
continue on the UConnectt system for a certain duration, after which the call is automatically transferred
from the UConnectt system to the mobile phone.
• An active call is automatically transferred to the
mobile phone after the ignition key is switched to OFF.
UConnectT System Features
Language Selection
To change the language that the UConnectt system is
using:
• Press the PHONE button to begin.
• After the 9Ready9 prompt and the following beep, say
the name of the language you wish to switch to
English, Espanol, or Francais.
• Continue to follow the system prompts to complete
language selection.
JOBNAME: CHRY OM (Contenta pu PAGE: 14 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
14
After selecting one of the languages, all prompts and
voice commands will be in that language.
NOTE: After every UConnectt language change operation, only the language-specific 32-name phonebook is
usable. The paired phone name is not language-specific
and usable across all languages.
Emergency Assistance
If you are in an emergency and the mobile phone is
reachable:
• Pick up the phone and manually dial the emergency
number for your area.
If the phone is not reachable and the UConnectt system
is operational, you may reach the emergency number as
follows:
• Press the PHONE button to begin.
• After the 9Ready9 prompt and the following beep, say
9Emergency9 and the UConnectt system will instruct
the paired cellular phone to call the emergency number. This feature is supported in the U.S., Canada, and
Mexico.
NOTE:
• The emergency number dialed is based on the country
where the vehicle is purchased (911 for the U.S. and
Canada and 060 for Mexico). The number dialed may
not be applicable with the available cellular service
and area.
• If supported, this number may be programmable on
some systems. To do this, press ‘Phone’ button and say
‘Setup’, followed by ‘Emergency’.
• The UConnectt system does slightly lower your
chances of successfully making a phone call as to that
for the cell phone directly.
JOBNAME: CHRY OM (Contenta pu PAGE: 15 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
15
WARNING!
Your phone must be turned on and paired to the
UConnectt system to allow use of this vehicle feature
in emergency situations, when the cell phone has
network coverage and stays paired to the UConnectt
system.
Towing Assistance
If you need towing assistance:
• Press the PHONE button to begin.
• After the 9Ready9 prompt and the following beep, say
9Towing Assistance.9
NOTE:
• The Towing Assistance number dialed is based on the
country where the vehicle is purchased (1-800-5282069 for the U.S., 1-877-213-4525 for Canada, 55-143454 for Mexico City and 1-800-712-3040 for outside
Mexico City in Mexico).
• If supported, this number may be programmable on
some systems. To do this, press ‘Phone’ button and say
‘Setup’, followed by ‘Towing Assistance’.
Paging
To learn how to page, refer to 9Working with Automated
Systems.9 Paging works properly except for pagers of
certain companies, which time out a little too soon to
work properly with the UConnectt system.
Voice Mail Calling
To learn how to access your voice mail, refer to 9Working
with Automated Systems.9
JOBNAME: CHRY OM (Contenta pu PAGE: 16 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
16
Working with Automated Systems
This method is used in instances where one generally has
to press numbers on the cellular phone keypad while
navigating through an automated telephone system.
You can use your UConnectt system to access a voice
mail system or an automated service, such as a paging
service or automated customer service line. Some services require immediate response selection. In some
instances, that may be too quick for use of the UConnectt
system.
When calling a number with your UConnectt system
that normally requires you to enter in a touch-tone
sequence on your cellular phone keypad, you can press
the “Voice Recognition” button and say the sequence you
wish to enter, followed by the word 9Send.9 For example,
if required to enter your PIN followed with a pound, (3 7
4 6 #), you can press the “Voice Recognition” button and
say, 93 7 4 6 # Send.9 Saying a number, or sequence of
numbers, followed by 9Send,9 is also to be used for
navigating through an automated customer service center menu structure, and to leave a number on a pager.
You can also send stored UConnectt phonebook entries
as tones for fast and easy access to voice mail and pager
entries. To use this feature, dial the number you wish to
call and then press the “Voice Recognition” button and
say, “Send.” The system will prompt you to enter the
name or number and say the name of the phonebook
entry you wish to send. The UConnectt system will then
send the corresponding phone number associated with
the phonebook entry, as tones over the phone.
NOTE:
• You may not hear all of the tones due to cellular phone
network configurations; this is normal.
• Some paging and voice mail systems have system time
out settings that are too short and may not allow the
use of this feature.
JOBNAME: CHRY OM (Contenta pu PAGE: 17 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
17
Barge In - Overriding Prompts
The “Voice Recognition” button can be used when you
wish to skip part of a prompt and issue your voice
recognition command immediately. For example, if a
prompt is asking 9Would you like to pair a phone, clear
a{,9 you could press the “Voice Recognition” button and
say, 9Pair a Phone9 to select that option without having to
listen to the rest of the voice prompt.
Phone and Network Status Indicators
If available on the radio and/or on a premium display
such as the instrument panel cluster, and supported by
your cell phone, the UConnectt system will provide
notification to inform you of your phone and network
status when you are attempting to make a phone call
using UConnectt. The status is given for roaming, network signal strength, phone battery strength, etc.
Turning Confirmation Prompts On/Off
Turning confirmation prompts off will stop the system
from confirming your choices (e.g., the UConnectt system will not repeat a phone number before you dial it).
Dialing Using the Cellular Phone Keypad
You can dial a phone number with your cellular phone
keypad and still use the UConnectt system (while dialing via the cell phone keypad, the user must exercise
caution and take precautionary safety measures). By
dialing a number with your paired Bluetootht cellular
phone, the audio will be played through your vehicle’s
audio system. The UConnectt system will work the same
as if you dial the number using voice recognition.
• Press the PHONE button to begin.
• After the 9Ready9 prompt and the following beep, say
9Setup Confirmations.9 The UConnectt system will
play the current confirmation prompt status and you
will be given the choice to change it.
JOBNAME: CHRY OM (Contenta pu PAGE: 18 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
18
NOTE: Certain brands of mobile phones do not send the
dial ring to the UConnectt system to play it on the
vehicle audio system, so you will not hear it. Under this
situation, after successfully dialing a number the user
may feel that the call did not go through even though the
call is in progress. Once your call is answered, you will
hear the audio.
Mute/Un-Mute (Mute Off)
When you mute the UConnectt system, you will still be
able to hear the conversation coming from the other
party, but the other party will not be able to hear you. In
order to mute the UConnectt system:
• Press the “Voice Recognition” button.
• Following the beep, say 9Mute.9
In order to un-mute the UConnectt system:
• Press the “Voice Recognition” button.
• Following the beep, say 9Mute off.9
Advanced Phone Connectivity
Transfer Call to and from Cellular Phone
The UConnectt system allows ongoing calls to be transferred from your cellular phone to the UConnectt system
without terminating the call. To transfer an ongoing call
from your UConnectt paired cellular phone to the
UConnectt system or vice versa, press the “Voice Recognition” button and say 9Transfer Call.9
Connect or Disconnect Link Between the
UConnectt System and Cellular Phone
Your cellular phone can be paired with many different
electronic devices, but can only be actively 9connected9
with one electronic device at a time.
If you would like to connect or disconnect the Bluetootht
connection between a UConnectt paired cellular phone
JOBNAME: CHRY OM (Contenta pu PAGE: 19 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
19
and the UConnectt system, follow the instructions described in your cellular phone User’s Manual.
List Paired Cellular Phone Names
• Press the PHONE button to begin.
• After the “Ready” prompt and the following beep, say
“Setup Phone Pairing.”
• When prompted, say 9List Phones.9
• The UConnectt system will play the phone names of
all paired cellular phones in order from the highest to
the lowest priority. To “select” or “delete” a paired
phone being announced, press the “Voice Recognition” button and say “Select” or “Delete.” Also, see the
next two sections for an alternate way to “select” or
“delete” a paired phone.
Select Another Cellular Phone
This feature allows you to select and start using another
phone paired with the UConnectt system.
• Press the PHONE button to begin.
• After the 9Ready9 prompt and the following beep, say
9Setup Select Phone9 and follow the prompts.
• You can also press the “Voice Recognition” button at
any time while the list is being played, and then
choose the phone that you wish to select.
• The selected phone will be used for the next phone
call. If the selected phone is not available, the
UConnectt system will return to using the highest
priority phone present in or near (approximately
within 30 ft [9 m]) the vehicle.
Delete UConnectt Paired Cellular Phones
• Press the PHONE button to begin.
JOBNAME: CHRY OM (Contenta pu PAGE: 20 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
20
• After the 9Ready9 prompt and the following beep, say
9Setup Phone Pairing.9
• At the next prompt, say 9Delete9 and follow the
prompts.
• You can also press the “Voice Recognition” button at
any time while the list is being played, and then
choose the phone you wish to delete.
system Voice Training feature may be used. To enter this
training mode, follow one of the two following procedures:
From outside the UConnectt mode (e.g., from radio
mode):
• Press and hold the “Voice Recognition” button for five
seconds until the session begins, or,
Things You Should Know About Your UConnectT
System
• Press the “Voice Recognition” button and say the
9Setup, Voice Training9 command.
UConnectt Tutorial
To hear a brief tutorial of the system features, press the
PHONE button and say “UConnectt Tutorial.”
Repeat the words and phrases when prompted by the
UConnectt system. For best results, the Voice Training
session should be completed when the vehicle is parked
with the engine running, all windows closed, and the
blower fan switched OFF.
Voice Training
For users experiencing difficulty with the system recognizing their voice commands or numbers, the UConnectt
This procedure may be repeated with a new user. The
system will adapt to the last trained voice only.
JOBNAME: CHRY OM (Contenta pu PAGE: 21 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
21
To restore the Voice Recognition system to factory default
settings, enter the Voice Training session via the above
procedure and follow the prompts.
Voice Recognition (VR)
• For best performance, adjust the rearview mirror to
provide at least 1⁄2 in (1 cm) gap between the overhead
console (if equipped) and the mirror.
• Always wait for the beep before speaking.
• Speak normally, without pausing, just as you would
speak to a person sitting a few feet/meters away from
you.
• Make sure that no one other than you is speaking
during a voice recognition period.
• Performance is maximized under:
• low-to-medium blower setting,
• low-to-medium vehicle speed,
• low road noise,
• smooth road surface,
• fully closed windows,
• dry weather condition.
• Even though the system is designed for users speaking
in North American English, French, and Spanish accents, the system may not always work for some.
• When navigating through an automated system such
as voice mail, or when sending a page, at the end of
speaking the digit string, make sure to say 9Send.9
• Storing names in the phonebook when the vehicle is
not in motion is recommended.
• It is not recommended to store similar sounding
names in the UConnectt phonebook.
JOBNAME: CHRY OM (Contenta pu PAGE: 22 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
22
• Phonebook (Downloaded and UConnect Local) name
recognition rate is optimized when the entries are not
similar.
• You can say 9O9 (letter 9O9) for 909 (zero). 98009 must be
spoken 9eight-zero-zero.9
• smooth road surface,
• fully closed windows,
• dry weather conditions, and
• operation from the driver’s seat.
• Even though international dialing for most number
combinations is supported, some shortcut dialing
number combinations may not be supported.
• Performance, such as audio clarity, echo, and loudness
to a large degree rely on the phone and network, and
not the UConnectt system.
• In a convertible vehicle, system performance may be
compromised with the convertible top down.
• Echo at the far end can sometimes be reduced by
lowering the in-vehicle audio volume.
Far End Audio Performance
• In a convertible vehicle, system performance may be
compromised with the convertible top down.
• Audio quality is maximized under:
• low-to-medium blower setting,
• low-to-medium vehicle speed,
• low road noise,
JOBNAME: CHRY OM (Contenta pu PAGE: 23 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
23
Bluetootht Communication Link
Cellular phones have been found to lose connection to
the UConnectt system. When this happens, the connection can generally be re-established by switching the
phone off/on. Your cell phone is recommended to remain
in Bluetootht ON mode.
Power-Up
After switching the ignition key from OFF to either ON
or ACC position, or after a language change, you must
wait at least five seconds prior to using the system.
JOBNAME: CHRY OM (Contenta pu PAGE: 24 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
24
JOBNAME: CHRY OM (Contenta pu PAGE: 25 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
25
JOBNAME: CHRY OM (Contenta pu PAGE: 26 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
26
JOBNAME: CHRY OM (Contenta pu PAGE: 27 SESS: 3 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
27
Primary
zero
one
two
three
four
five
six
seven
eight
nine
star (*)
plus (+)
pound (#)
add location
all
Voice Commands
Alternate(s)
Voice Commands
Primary
Alternate(s)
call
cancel
confirmation prompts
continue
delete
dial
download
edit
emergency
English
erase all
Espanol
Francais
help
home
JOBNAME: CHRY OM (Contenta pu PAGE: 28 SESS: 3 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
28
Primary
language
list names
list phones
mobile
mute
mute off
new entry
no
pager
pair a phone
phone pairing
phonebook
previous
record again
redial
Voice Commands
Alternate(s)
pairing
phone book
Voice Commands
Primary
Alternate(s)
return to main menu
return or main menu
select phone
select
send
set up
phone settings or phone
set up
towing assistance
transfer call
UConnectt Tutorial
try again
voice training
work
yes
JOBNAME: CHRY OM (Contenta pu PAGE: 29 SESS: 3 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
29
General Information
This device complies with Part 15 of the FCC rules and
RSS 210 of Industry Canada. Operation is subject to the
following conditions:
• Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
• This device may not cause harmful interference.
• This device must accept any interference received,
including interference that may cause undesired
operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 29
Create Date                     : 2008:02:12 12:12:48
Producer                        : Acrobat Distiller Command 3.01 for AIX 4.1.1 and later (RS6000)
Creator                         : XyEnterprise XPP 7.3C.1  Patch #5
Title                           : CHRY OM (Contenta pu

EXIF Metadata provided by EXIF.tools