VIA Technologies VESHPD01A1 Door Station User Manual QG SHP D01 with spec ENG pub
VIA Technologies, Inc. Door Station QG SHP D01 with spec ENG pub
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2845520 |
| Application ID | v3w33m5iaSi49iGNwPpYyQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 17.99kB (224838 bits) |
| Date Submitted | 2015-12-17 00:00:00 |
| Date Available | 2016-06-14 00:00:00 |
| Creation Date | 2015-11-23 18:08:34 |
| Producing Software | GPL Ghostscript 9.04 |
| Document Lastmod | 2015-11-23 18:08:34 |
| Document Title | QG_SHP-D01-with spec-ENG.pub |
| Document Creator | PDFCreator Version 1.2.3 |
| Document Author: | SylvieLin |
2. SHP-D01 Front/Side panel 1. SHP-D01 Specifications Quick Guide SHP-D01 Item Description Camera 500 megapixel wideangle color lens Front panel and size mm DC-In power Brightness exposure LED Door Station Reader (RFID) Product Information 3. SHP-D01 back panel Side panel and size Support 13.56MHz, ISO14443A standard Adjustment of camera RJ45 port mm Network Interface RJ-45 Model: SHP-D01 Package Lists: mm RS485 port Network transmis- 10/100M sion rate -SHP-D01 door station X 1 Power consumption <10W Operating temperature 0~40° Humidity 0~95%, non-condensing Purple DC-12V brow Power black -DIO cable X 1 Red -RS485 cable X 1 Green LED Red LED -M4 * 30mm screw X 3 -8mm brass pipe + spring X 1 -Quick Guide X 1 Green LED ON: normal operation Green LED flash: booting White Grey Purple Bleu Green Yellow Orange Red brow black 3 Security has been triggered ○ 5. SHP-D01 Installation steps OMRON MY2-J Relay as an 1. This diagram is for reference only, please see DIO definition for actual connection. 1. Put brass pipe + spring on the embedded box, 1 . as indicated in the ○ example) 2. Max. value of motion for DIO is 400mA. 2. Distance between bottom of the embedded box and the ground is 132 cm. Alarm speaker reserved DI2 reserved reserved DO1 Open the door Connect NO Relay default status is On DO2 reserved reserved DO3 reserved reserved mm Note: Note: Dry Contact switch reserved switch 4. Relay connection (use DIO definition DI1 DIO port 2 Anti-dismantle has been triggered ○ 4 Force status has been triggered ○ DIO pin definition ring 1 Enable home or Red LED ON: ○ egress security 3. DI can externally connect to spring switch and NC of the dry contact. If the same DI needs to use 2 or more spring switches, connect by series. 4. DI that externally connects to switch (eg, doorbell, emergency pressure deduction) and gas detector, can connect to NO. To use 2 or more devices, connect by series. ○ 5. If DI2 of the door station is not connected to door detector, please short DI2 and DI2GND. 6. When DO connects to electric lock, power supply locks, interruption of power supply unlocks. 7. When DO connects to alarm, alarm connects to Relay NO, motion on Relay will enable the alarm. 132 cm 3. Remove two M2 screws from the bottom of the plaque. Take off the plate in order to separate the plaque and the main part. 4. Use M4 screw to fix the main part. 5. Distance between bottom of the door station and the ground is 131 cm. Please consider the thickness of the tile or marble. 6. Put the front plaque and plate back. Fix the bottom with two M2 screws. 6. SHP-D01 installation diagram RFID area (within Assistant Exposure light rectangular area ) lens 179.6 cm Angle of view 60° 145 cm 69.2 cm Height between lens and ground 110.4 cm key 60 cm plate M2 screw Distance between lens and subject M2 screw Note: Note: M2 screw M2 screw 1. Be careful of the orientation during 131 cm installation. 2. Please do not install any other device close to the door station, keep at least 10 cm of distance. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause. CAUTION! To prevent shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified personnel. VIA Technologies, Inc. 1F, 531, Zhong-zheng Road, For more information on this and other VIA products, please visit : Xindian District, New Taipei City 231, Taiwan www.viatech.com/en/ Tel: 886-2-2218-5452 Fax: 886-2-2218-5453 Copyright © 2015 VIA Technologies, Inc. All rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 Producer : GPL Ghostscript 9.04 Keywords : () Modify Date : 2015:11:23 18:08:34+08:00 Create Date : 2015:11:23 18:08:34+08:00 Creator Tool : PDFCreator Version 1.2.3 About : acf85f2d-9425-11e5-0000-46054450ced.X€Ü.2015-11-23T18:08:34+08:00 Document ID : uuid:acf85f2d-9425-11e5-0000-46054450ced¼@B‡Òc.. Format : application/pdf Title : QG_SHP-D01-with spec-ENG.pub Creator : SylvieLin Description : () Author : SylvieLin Subject :EXIF Metadata provided by EXIF.tools