VTech Connect 6018-930 Pager User Manual manual

VTech Connect Limited Pager manual

User Manual

6018 POCSAG CCD-22-line Multi-lingual Display PagerUser ManualVersion 0.0(ENGINEERING DEPARTMENT)Document No.: C 3G 6018 UM 9N M 0000 002 0Name Signature DatePrepared by:Approved bya member of the groupElectronics Limited
Uncontrolled ( ) Controlled ( ) Copy No.:
Document HistoryDate Author Version Description of ChangesNov 22, 99 Bili Cheung 0.0 Original release.
Table of Contents1. OVERVIEW OF 6018 62. ICONS 72.1.1 Status Icons 72.1.2 Memory Bank Icons 72.1.3 Function Icons 82.1.4 Operation Icons 83. OPERATIONS 93.1 To Power On the Pager 93.2 To Power Off the Pager 93.3 Accessing Memory Banks 103.4 Receiving and Reading Messages 103.5 Individual Message Removal 113.6 Removing All Messages 113.7 Message Protection 113.8 Copying Message to Personal Memory Bank 123.9 Personal Message Alarm Setup 123.10 News Message Alarm Setup 133.11 Real Time Clock Setup 133.12 Alert Mode Selection 143.13 Appointment Alarm Setup 143.14 Melody Selection 153.15 Unread Message Alarm Adjustment 163.16 Font Size Changing 163.17 Password Setup 163.18 Alert Duration Adjustment 183.19 Auto Timer Setup 183.20 Silent Timer Setup 19
3.21 Message Display Duration Adjustment 193.22 Low Battery Alert 203.23 Illumination 20
DATE OF ISSUE: 4-Jan-00 Page 6 of 21DOC. NO.: C 3G 6018 UM 9N M 0000 002 0VERSION 0.0 6018 POCSAG CCD-2 2-line Multi-lingual Display Pager UserManualCIRKISYS ELECTRONICS LTD.1. Overview of 6018The dimensions of 6018 numeric pager are 73.5mm(L) x 50mm(W) x 18.5mm(D). Its twodimensional drawing is shown below.69.7mm43.0mmFunction keyLeft keyRight keyConfirm key
DATE OF ISSUE: 4-Jan-00 Page 7 of 21DOC. NO.: C 3G 6018 UM 9N M 0000 002 0VERSION 0.0 6018 POCSAG CCD-2 2-line Multi-lingual Display Pager UserManualCIRKISYS ELECTRONICS LTD.2. Icons2.1.1 Status IconsThe pager is outside the service areaAudio alarm modeVibrating alert modeSilent modeAuto on/off timer is being setThe silent reception function is set but inactivatedThe silent reception function is set and activatedThe first alarm clock is setThe second alarm clock is setBoth the first and the second alarm clocks are setThe message is protectedA password is setFull battery indicationHalf battery indicationLow battery indicationUnread message indicator, the number indicates the totalnumber of unread messagesUnread news indicator2.1.2 Memory Bank IconsUser memory bankPersonal memory bankNews memory bank
DATE OF ISSUE: 4-Jan-00 Page 8 of 21DOC. NO.: C 3G 6018 UM 9N M 0000 002 0VERSION 0.0 6018 POCSAG CCD-2 2-line Multi-lingual Display Pager UserManualCIRKISYS ELECTRONICS LTD.2.1.3 Function IconsMaking copy of user/group message to personal memorybankMessage protectionTurning off the pagerDate and time settingAlert mode selectionMusic selection for audio alertAppointment alarm settingAuto on/off timer settingSilent reception timer settingUnread message alarm interval settingAlert duration settingMessage display duration settingPassword setupDeleting individual message from the current memory bankDeleting all messages from the current memory bankPersonal message alarm settingNews message receiving alarm settingChanging the message display font size2.1.4 Operation IconsNext page/screenExit from a current screen
DATE OF ISSUE: 4-Jan-00 Page 9 of 21DOC. NO.: C 3G 6018 UM 9N M 0000 002 0VERSION 0.0 6018 POCSAG CCD-2 2-line Multi-lingual Display Pager UserManualCIRKISYS ELECTRONICS LTD.3. Operations3.1 To Power On the Pager• Press and hold the Confirm key for 3 seconds.• Either an audio beeping tone or pager vibration will be generated as the power onsignal.• Stop the power on signal by pressing any key, the pager will then display thestatus screen.• The pager will then enter the standby mode for power saving with the LCD turnedoff.• The status screen can be displayed again by pressing any key.3.2 To Power Off the Pager• Press the Function key to evoke the second function menu from the status screen.• Press either one of the arrow keys to select the ‘ ’ icon.• Hold the Confirm key for 3 seconds to turn off the pager.
DATE OF ISSUE: 4-Jan-00 Page 10 of 21DOC. NO.: C 3G 6018 UM 9N M 0000 002 0VERSION 0.0 6018 POCSAG CCD-2 2-line Multi-lingual Display Pager UserManualCIRKISYS ELECTRONICS LTD.3.3 Accessing Memory Banks• Press the Function key to evoke the first function menu from the status screen.• Press an arrow key to select the ‘ ’ icon and press the confirm key to accessthe user memory bank.• Press an arrow key to select the ‘ ’ icon and press the confirm key to access thepersonal memory bank.• Press an arrow key to select the ‘ ’ icon and press the confirm key to accessthe news memory bank.3.4 Receiving and Reading Messages• The pager will generate an audio alert, a vibration alert or remain silent whenreceiving a call.• The following screen will be displayed simultaneously.• Press any key to stop the alert.• Press the Confirm key read the latest message.• The pager will notify the user the number of unread messages by displaying the‘’ icon.• Fast message scrolling can be invoked by continuously pressing the Confirm key(all unread messages will be displayed first).• The following prompt message will be displayed if there is no message.
DATE OF ISSUE: 4-Jan-00 Page 11 of 21DOC. NO.: C 3G 6018 UM 9N M 0000 002 0VERSION 0.0 6018 POCSAG CCD-2 2-line Multi-lingual Display Pager UserManualCIRKISYS ELECTRONICS LTD.3.5 Individual Message Removal• Recall the message to be deleted.• Press the Function key to evoke the user memory bank menu.• Press an arrow key to select the ‘ ’ icon.• Press the Confirm key to delete the message.3.6 Removing All Messages• Press the Function key to evoke the user memory bank menu.• Press an arrow key to select the ‘ ’ icon.• Press Confirm key to delete all the messages.• Protected messages will not be deleted.3.7 Message Protection• Up to 10 messages can be protected.• Recall a message in the user memory bank and press the Function key to evokethe user memory bank menu.• Press an arrow key to select the ‘ ’ icon.• Press the Confirm key to lock the message.• A ‘ ’ icon would be display at the top right corner of the message screen.• A prompt message will be displayed if there are already 10 messages protected inthe memory.
DATE OF ISSUE: 4-Jan-00 Page 12 of 21DOC. NO.: C 3G 6018 UM 9N M 0000 002 0VERSION 0.0 6018 POCSAG CCD-2 2-line Multi-lingual Display Pager UserManualCIRKISYS ELECTRONICS LTD.3.8 Copying Message to Personal Memory Bank• Recall a message in the user memory bank.• Press the Function key to evoke the user memory bank menu.• Press an arrow key to select the ‘ ’ icon.• Press the Confirm key to copy the message to the personal memory bank.• A message will be prompted to the user if the personal memory is full.• The pager will display a screen for personal alarm setting after the message hasbeen copied. Follow the steps outlined in Section Personal Message Alarm Setupto set the personal alarm, or press the Confirm key to abort.3.9 Personal Message Alarm Setup• User can set a personal alarm to every message in the personal memory bank.• Select a message in the personal memory bank first.• Press the Function key to evoke the personal memory bank menu.• Press an arrow key to select the ‘ ’ icon.• Press the Confirm key to enter the alarm setup screen.• Press an arrow key to toggle between ‘ ’ to proceed further or ‘ ’ to abort thefunction.• Press an arrow key to locate the date and time fields.• Press the Confirm key to adjust the digits.
DATE OF ISSUE: 4-Jan-00 Page 13 of 21DOC. NO.: C 3G 6018 UM 9N M 0000 002 0VERSION 0.0 6018 POCSAG CCD-2 2-line Multi-lingual Display Pager UserManualCIRKISYS ELECTRONICS LTD.• A bell icon ‘ ’ will be displayed in every message screen if the alarm is set, thecrossed-bell icon ‘ ’ will be displayed if the alarm has been activated.3.10 News Message Alarm Setup• User can also set a news message alarm to every mailbox in the news memorybank.• After entering the news memory bank, press the Function key to evoke the newsmemory bank menu.• Press an arrow key to select the ‘ ’ icon.• Press the Confirm key to set the alarm.• A bell icon ‘ ’ will then be displayed in every message screen.3.11 Real Time Clock Setup• Press the Function key to evoke the first function menu from the status screen.• Press an arrow key to select the ‘ ’ icon.• Press the Confirm key to enter the real time clock setup screen.• Press an arrow key to locate a digit as well as the time display mode foradjustment.
DATE OF ISSUE: 4-Jan-00 Page 14 of 21DOC. NO.: C 3G 6018 UM 9N M 0000 002 0VERSION 0.0 6018 POCSAG CCD-2 2-line Multi-lingual Display Pager UserManualCIRKISYS ELECTRONICS LTD.• Press the Function key to adjust the time first and to toggle among the options oftime display format.• Repeat the steps for date adjustment.• Press the Confirm key to confirm the setting and return to the status screen.3.12 Alert Mode Selection• Press an arrow key to select the ‘ ’ icon in the first function menu.• Press the Confirm key to enter the alert mode setting screen.• The current alert mode will be displayed in the alert mode setting screen.• Press an arrow key to select an alert mode among the options - ‘SILENT’,‘VIBRATE’, ‘AUDIO’, ‘VIB-AUD’, and ‘EXIT’ (return to the status screenwithout updating the setting).• Press the Confirm key to confirm the setting and return to the status screen.3.13 Appointment Alarm Setup• User can set two appointment alarms as personal reminders in the pager.• Press the Function key to evoke the second function menu from the status screen.• Press an arrow key to select the ‘ ’ icon.• Press the Confirm key to enter the appointment alarm setup screen.
DATE OF ISSUE: 4-Jan-00 Page 15 of 21DOC. NO.: C 3G 6018 UM 9N M 0000 002 0VERSION 0.0 6018 POCSAG CCD-2 2-line Multi-lingual Display Pager UserManualCIRKISYS ELECTRONICS LTD.• Press an arrow key to locate the alarm number and press the Function key toselect an alarm.• Repeat the steps to select an alarm mode among the options of one-off ‘ ’, daily‘’ and disable ‘ ’.• If either the one-off mode or the daily mode is selected, the alarm time will beprompted to user for alarm time setting.• Press an arrow key to locate the time digits.• Press the Function key to adjust the time.• Press the Confirm key to confirm the setting and return to the status screen.• If only one alarm is set, either the ‘ ’ or ‘ ’ icon will be displayed in the statusscreen. If both alarms are set, then the ‘ ’ icon will be displayed.3.14 Melody Selection• Press an arrow key to select the ‘ ’ icon in the second function menu.• Press the Confirm key to enter the melody selection screen.• The current melody will be displayed in the melody selection screen.• Press an arrow key to select a call type among the options ‘A’, ‘B’, ‘C’ and ‘D’first.• Press the Confirm key to confirm call type selection.• Press an arrow key to select a melody among the standard tone and 15 melodies.• Press the Confirm key to confirm the setting and return to the status screen.
DATE OF ISSUE: 4-Jan-00 Page 16 of 21DOC. NO.: C 3G 6018 UM 9N M 0000 002 0VERSION 0.0 6018 POCSAG CCD-2 2-line Multi-lingual Display Pager UserManualCIRKISYS ELECTRONICS LTD.3.15 Unread Message Alarm Adjustment• Press an arrow key to select the ‘ ’ icon in the second function menu.• Press the Confirm key to enter the unread message alarm adjustment screen.• The current unread message alarm setting is displayed in the adjustment screen.• Press an arrow key to toggle between ‘2m’ (2 minutes) and ‘--’ (disable thefunction).• Press the Confirm key to confirm the setting and return to the status screen.3.16 Font Size Changing• This function is not available for pager displaying Chinese or Thai.• Press an arrow key to select the ‘ ’ icon in the second function menu.• Press the Confirm key to toggle between large and small fonts for messageviewing.3.17 Password Setup• User can set up a password for the personal memory bank for security purpose.• This function cannot be executed if battery power is depleted.• Press the Function key to evoke the third function menu from the status screen.• Press an arrow key to select the ‘ ’ icon.• Press the Confirm key to enter the first password setup screen.
DATE OF ISSUE: 4-Jan-00 Page 17 of 21DOC. NO.: C 3G 6018 UM 9N M 0000 002 0VERSION 0.0 6018 POCSAG CCD-2 2-line Multi-lingual Display Pager UserManualCIRKISYS ELECTRONICS LTD.• User has to enter the previously set password before proceeding further (enter‘0000’ if the pager is used for the first time).• Press an arrow key to locate a field.• Press the Function key to toggle the digits for password entry.• An icon will be displayed to notify the user for password re-entry if a wrongpassword is entered.• Press an arrow key to locate a field.• Press the Function key to toggle the digits for password entry.• After the correct password has been entered, press the Confirm key to enter thesecond password setup screen.• Again press an arrow key to locate a field and press the Function key to togglethe digits to change the password.• After the password has been changed, user can move to the passwordactivation/deactivation field.• Press the Function key to select a tick ‘ ’ to activate the password or select across ‘ ’to deactivate the password.• Press the Confirm key to confirm the setting and return to the status screen.
DATE OF ISSUE: 4-Jan-00 Page 18 of 21DOC. NO.: C 3G 6018 UM 9N M 0000 002 0VERSION 0.0 6018 POCSAG CCD-2 2-line Multi-lingual Display Pager UserManualCIRKISYS ELECTRONICS LTD.3.18 Alert Duration Adjustment• User can adjust the duration for both standard beeping alert and vibrating alert.• Press an arrow key to select the ‘ ’ icon in the third function menu.• Press the Confirm key to enter the alert duration adjustment screen.• Press an arrow key to toggle among the options of ‘2s’ (2 seconds), ‘4s’, ‘6s’and ‘8s’.• Press the Confirm key to confirm the setting and return to the status screen.3.19 Auto Timer Setup• Press an arrow key to select the ‘ ’ icon in the third function menu.• Press the Confirm key to enter the first auto timer setup screen if no auto timer hasbeen set previously.• Press the Function key to enable the auto timer first, the second auto timer setupscreen will be displayed.• Press an arrow key to locate the digits.• Press the Function key to adjust the time period.• Press the Confirm key ( ) to confirm the setting and return to the status screen.• A ‘ ’ icon will be displayed in the status screen to notify the user.
DATE OF ISSUE: 4-Jan-00 Page 19 of 21DOC. NO.: C 3G 6018 UM 9N M 0000 002 0VERSION 0.0 6018 POCSAG CCD-2 2-line Multi-lingual Display Pager UserManualCIRKISYS ELECTRONICS LTD.3.20 Silent Timer Setup• Press an arrow key to select the ‘ ’ icon in the third function menu.• Press the Confirm key to enter the silent timer setup screen.• Press the Function key to enable the silent timer first, the second silent timer setupscreen will be displayed.• Press an arrow key to locate the digits.• Press the Function key to adjust the time period.• Press the Confirm key ( ) to confirm the setting and return to the status screen.• The ‘ ’ icon will be displayed if the silent timer has been set but not yet activated,whereas the ‘ ’ icon will be displayed if the silent timer has been activated.3.21 Message Display Duration Adjustment• Press an arrow key to select the ‘ ’ icon in the third function menu.• Press the Confirm key to enter the message display duration adjustment screen.• Press an arrow key to toggle among the options of ‘8s’ (8 seconds), ‘12s’, ‘30s’and ‘60s’.• Press the Confirm key to confirm the setting and return to the status screen.
DATE OF ISSUE: 4-Jan-00 Page 20 of 21DOC. NO.: C 3G 6018 UM 9N M 0000 002 0VERSION 0.0 6018 POCSAG CCD-2 2-line Multi-lingual Display Pager UserManualCIRKISYS ELECTRONICS LTD.3.22 Low Battery Alert• An hourly low voltage alert will be generated when the battery voltage dropsbelow a certain level.• The ‘ ’ icon will also be displayed.• Stop the alert by pressing any key.• Power off the pager and replace the battery.3.23 Illumination• Press the Function key for 2 seconds to activate the back-lighting during messagereading or from the status screen.
DATE OF ISSUE: 4-Jan-00 Page 21 of 21DOC. NO.: C 3G 6018 UM 9N M 0000 002 0VERSION 0.0 6018 POCSAG CCD-2 2-line Multi-lingual Display Pager UserManualCIRKISYS ELECTRONICS LTD.Warning: Changes or modifications to this unit not expressly approved by the party responsiblefor compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does not cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver isneeded.• Consult the dealer or an experienced radio/TV technician for help.This device compiles with Part 15 of the FCC Rules. Operation is subject to the following twoconditions. (1) this device may not cause harmful interference, and (2) this device must acceptany interference received, including interference that may cause undesired operation.

Navigation menu