Vigil Health Solutions ZRX Vitality Wireless Receiver (ZRX) User Manual The Vigil Care System

Download:
Mirror Download [FCC.gov]
Document ID	1617913
Application ID	i5RfkMjaYITSq/ZVI6/8Xw==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.02kB (137812 bits)
Date Submitted	2012-01-10 00:00:00
Date Available	2012-01-11 00:00:00
Creation Date	2012-01-05 16:00:33
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2012-01-06 15:57:41
Document Title	The Vigil Care System
Document Creator	Microsoft® Office Word 2007

Vigil Vitality Wireless Receiver - Manual
Vitality Wireless Receiver (ZRX)
Manual
Description
The Vigil Vitality Wireless Receiver (ZRX) is used to receive transmissions from wireless
devices and communicate the data back to the central computer. The Vitality Wireless
Receiver operates on the 2.4GHz IEEE 802.15.4 wireless platform. The ZRX is
connected to the network via low voltage cable (CAT5 or similar) which carries both the
data and power so that no additional power outlets are required at the locations of the
wireless receivers. The cable is terminated at the ZRX with RJ45 modular plugs or on the
screw terminal connector depending on system configuration. One ZRX covers a radius
of approximately 30-50 feet depending on building construction.
Wiring Instructions
1.
There are two options for wiring the ZRX depending on your
system configuration. Use the two RJ45 sockets when using
CAT5 cable for the installation. Use the one 4-pin screw
terminal connector when using 2 pair (4 conductor) 20AWG
stranded cable.
2.
Ensure cables are labelled as IN and OUT.
3.
For CAT5 applications, terminate the incoming and outgoing
CAT5 cable in RJ45 modular plugs as shown in Figure 1.
4.
For 4 conductor cable applications, terminate the both the incoming and outgoing cable in the 4-pin screw terminal
connector in the order shown in Figure 2. Note that there will be two white/blue conductors (in and out) in the CAN L
terminal, two blue conductors in the CAN H terminal, etc.
5.
For EOL (End of Line) device ONLY: Add a 100Ohm resister across the CANHI and CANLOW wires (Blue and White
Blue terminals) as shown in Figure 3.
Figure 1. RJ45 Modular Plug Wiring
Conductor
White/Blue
Blue
Green
White/Brown
Brown
White/Orange
Orange
White/Green
Use
CAN L
CAN H
GND
GND
GND
+24V
+24V
+24V
Figure 2. 4-pin Screw Terminal Wiring
From Left to Right:
CAN L White/Blue
CAN H Blue
GND
Green/WhiteBrown/Brown
+24V
WhiteOrange/Orange/WhiteGreen
Figure 3. End of Line Termination
Vigil Health Solutions Inc. dedicated to improving seniors' quality of life through creative technology.
Page 1 of 2
Revised: 2011-12-15
Vigil Health Solutions Inc. 2102 - 4464 Markham Street * Victoria, BC * Canada * V8Z 7X8. Phone: (250) 383.6900 * (877) 850.1122 Fax: (250) 383.6999 Web: www.vigil.com
© Vigil Health Solutions Inc.
Vigil Vitality Wireless Receiver - Manual
Vitality Wireless Receiver (ZRX)
Manual
Mounting Instructions

Screw mount to wall or ceiling using mounting holes and appropriate mounting hardware for location. Mounting hardware
not supplied. Keep metal screws away from antenna side of circuit board. The antenna is located on the opposite end of
the board from the connectors.

Receivers are typically mounted above the ceiling tile in a corridor. Receivers may also be mounted below the ceiling or
on the ceiling.
Do not mount Wireless Receivers on or near metal objects (HVAC, I Beams, etc) or electrical
devices (motors, high voltage switching, etc) as they can interfere with the wireless signals
Specifications
PHYSICAL
ELECTRICAL
Height
163mm (6.4")
Operating Voltage
10-40V DC
Width
108mm (4.25")
Input Voltage
24V
Depth
48mm (1.9")
Standing Current
8mA, 28.5mA burst
Enclosure Material
White Plastic
Connections
Mounting Method
Screw in drywall
Cable
RJ45 modular socket or 4 pin screw
terminal connector
CAT5E 4 Pair 24AWG or 2 pair
20AWG stranded
Temperature Ratings
Operating:
0°C to 50°C
Storage/ Transport:
-55°C to 85°C
(32°F to 122°F)
(-67°F to 185°F)
FCC/IC Statements
FCC ID UI6-ZRX
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
To Comply with FCC/IC RF exposure limits for general population/uncontrolled exposure, the antenna(s) used for this transmitter must
be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
IC: 6706A-ZRX
This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Cet appareil est conforme avec les norme(s) exemption de licences RSS d’Industrie Canada. Opération est sujet au deux conditions
suivantes. (1) Cet appareil ne peut causer d'interférences, et (2) cet appareil doit accepter toute interférence, y compris les
interférences qui peuvent causer un mauvais fonctionnement de l'appareil.
Vigil Health Solutions Inc. dedicated to improving seniors' quality of life through creative technology.
Page 2 of 2
Revised: 2011-12-15
Vigil Health Solutions Inc. 2102 - 4464 Markham Street * Victoria, BC * Canada * V8Z 7X8. Phone: (250) 383.6900 * (877) 850.1122 Fax: (250) 383.6999 Web: www.vigil.com
© Vigil Health Solutions Inc.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 
Create Date                     : 2012:01:05 16:00:33Z
Modify Date                     : 2012:01:06 15:57:41-06:00
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : 
Title                           : The Vigil Care System
Creator Tool                    : Microsoft® Office Word 2007
Metadata Date                   : 2012:01:06 15:57:41-06:00
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:a5043ab0-67bb-4264-80d2-3260b9c09ae7
Instance ID                     : uuid:ebf1d2ad-9623-42e1-8b55-3fe2034074e5
Page Count                      : 2

EXIF Metadata provided by EXIF.tools