Visonic TOWER20MCW OUTDOOR WIRELESS OCTA-PIR DETECTOR WITH ANTI-MASK User Manual TOWER20MCW UserMan

Download:
Mirror Download [FCC.gov]
Document ID	1155244
Application ID	Ylc10XhzkU0rQgwepc3ZAw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	79.52kB (994052 bits)
Date Submitted	2009-08-18 00:00:00
Date Available	2009-08-19 00:00:00
Creation Date	2009-08-04 17:28:47
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2009-08-04 17:29:37
Document Title	Microsoft Word - TOWER20MCW UserMan.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	emceng7

TOWER 20 AM MCW
Outdoor Wireless Octa-PIR™ Detector with Anti-Mask Installation Instructions
1. INTRODUCTION
DRAFT
Detector's Features
• Patented 8 independent PIR matrix (Octa-PIR™) with true
motion recognition (TMR) processing for each of the 8 PIR
detectors and central motion processing - can distinguish
between a moving intruder and moving trees and bushes.
• Immunity to pets weighing up to 18 Kg (40lb), not pet alley.
• Smart protection against snow, rain, dust, wind and direct
sunlight.
• Tamper protection when the detector is opened, removed
from mounting surface or removed from bracket.
• Alarm LED is visible under strong sunlight.
LED
•
•
•
•
Figure 1 - TOWER 20 AM MCW
Day/night recognition for sophisticated operation.
Robust housing.
Anti masking mode.
Coverage: 12 meters / 90º.
2. SPECIFICATIONS
OPTICAL
Sensors: 8 dual-element Pyroelectric sensors
provide 16 element array.
Max. Coverage: 12 meters / 90º.
Detector Technology: 8 independent PIR
detectors
Pet- immune: Up to 18Kg ?? (40lb. ??)
ENVIRONMENTAL
Operating Temperature: -30°C ??? to 60°C
Storage Temperature: -30°C to 60°C
Humidity: 95% max.
White light immunity: Above 6500 lux
TOP VIEW
90°
PHYSICAL
Dimensions (height x length x width:
157x147x124mm (6-3/16 x 5-13/16 x 4-7/8").
Weight: .......
Color: White or off-white gray ??
ELECTRICAL
Input Power: Two 3V CR123A Lithium batteries.
Battery life: 3 years (for typical use).
WIRELESS
Frequency (MHz): 315, 433, 868.95.
Communication protocol: PowerCode
MOUNTING
Mounting type: Wall mounting
Mounting height: 1.8 to 3.0 meters
Vertical adjustment: 0º to -10º, in 2.5º steps
Horizontal adjustment: -45º to +45º, in 5º steps
STANDARDS COMPLIANCE
Designed to Comply with EN 50131-2-2
"environmental class IV".
SIDE VIEW OF
EACH DETECTOR
close curtains
2.4 m
(8 ft)
10
20
30
12 m
40 ft
EMI Immunity: CE and EN 50131 (min. 20 V/m
10 to 1000 MHz, min. 10 V/m 1Ghz to 2Ghz).
US Patents: 7250605, 6818881, 5693943
Fig. 2 - Coverage pattern
3. INSTALLATION
3.1 DIP Switches Setup
Remove the 2 detector's bottom covers (see Figure 3. steps 4-8)
to gain access to the DIP switches. Set the DIP switches
according to the following table:
DIP
Function Description
Default
SW #
OFF: Motion and masking alarm
Alarm LED LED is disabled (OFF).
OFF
OFF/ON
ON: Motion and masking alarm LED
is enabled (ON).
OFF: Motion alarms are always
24H / night enabled (24 hours).
OFF
only
ON: Motion alarms are enabled only
at dark (night).
PIR signal
processing TBD. ???
TBD??
modes
3.2 Installation
See Figure 3.
3.3 Adjustments
Perform detector's horizontal adjustment, vertical adjustment and
final closure, as shown in Figure 4.
3.4 Test
Note: The detector automatically enters into 15 minutes walktest mode after battery installation or Tamper switch recovery.
B. Walk into the detector's field of view at the expected far edge
of the coverage area. Verify that each time your motion is
detected the LED lights for 2 seconds and the control panel
receives the alarm. If required, perform detector's horizontal /
vertical readjustments.
Important! Instruct the user to perform walk test at least once a
week, to verify proper operation of the detector.
C. Place a piece of cardboard on the detector’s front side, to
deliberately mask the optical window. After 30 seconds, the LED
should flash for 5 seconds (see table below) and the alarm control
panel should receive the masking alarm.
D. Remove the masking from the detector’s front side. The LED
should extinguish (after a few seconds).
LED operation:
Event
LED Operation
First 30 sec after battery insertion or
slow flashing
closing the detector cover
Tamper switch open
ON 2 sec.
Mask detection (*) (**)
fast flashing 5 sec.
PIR detection (**)
ON 2 sec.
* The LED flashes fast continuously during walk-test mode.
** LED ON/OFF control by DIP switch #1 (see par. 3.1).
A. Set the detector in Walk-Test mode, as follows:
Open the detector bottom cover (see Fig. 3, steps 4 - 6) and
then close it. The LED will flash for 30 seconds and then the
detector will enter into 15 minutes walk-test mode.
D-301620
Mark
Drill
Fasten
For Tamper
switch
Mounting on bracket
Battery insertion
10
11
Figure 3 - Installation
D-301620
HORIZONTAL ADJUSTMENT
(-45° to +45° in 5° clicks / steps)
Horizontal
scale
VERTICAL ADJUSTMENT
(0° to -10° in 2.5° clicks / steps)
COVER CLOSURE
10
11
Figure 4 - Adjustment and Cover Closure
D-301620
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
WARRANTY
Visonic Limited (the “Manufacturer") warrants this product only (the "Product") to the original purchaser
only (the “Purchaser”) against defective workmanship and materials under normal use of the Product for a
period of twelve (12) months from the date of shipment by the Manufacturer.
This Warranty is absolutely conditional upon the Product having been properly installed, maintained and
operated under conditions of normal use in accordance with the Manufacturers recommended installation
and operation instructions. Products which have become defective for any other reason, according to the
Manufacturers discretion, such as improper installation, failure to follow recommended installation and
operational instructions, neglect, willful damage, misuse or vandalism, accidental damage, alteration or
tampering, or repair by anyone other than the manufacturer, are not covered by this Warranty.
The Manufacturer does not represent that this Product may not be compromised and/or circumvented or
that the Product will prevent any death and/or personal injury and/or damage to property resulting from
burglary, robbery, fire or otherwise, or that the Product will in all cases provide adequate warning or
protection. The Product, properly installed and maintained, only reduces the risk of such events without
warning and it is not a guarantee or insurance that such events will not occur.
THIS WARRANTY IS EXCLUSIVE AND EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,
OBLIGATIONS OR LIABILITIES, WHETHER WRITTEN, ORAL, EXPRESS OR IMPLIED, INCLUDING
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR
OTHERWISE. IN NO CASE SHALL THE MANUFACTURER BE LIABLE TO ANYONE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS WARRANTY OR ANY OTHER
WARRANTIES WHATSOEVER, AS AFORESAID.
THE MANUFACTURER SHALL IN NO EVENT BE LIABLE FOR ANY SPECIAL, INDIRECT,
INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES OR FOR LOSS, DAMAGE, OR EXPENSE,
INCLUDING LOSS OF USE, PROFITS, REVENUE, OR GOODWILL, DIRECTLY OR INDIRECTLY
ARISING FROM PURCHASER’S USE OR INABILITY TO USE THE PRODUCT, OR FOR LOSS OR
DESTRUCTION OF OTHER PROPERTY OR FROM ANY OTHER CAUSE, EVEN IF MANUFACTURER
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
THE MANUFACTURER SHALL HAVE NO LIABILITY FOR ANY DEATH, PERSONAL AND/OR BODILY
INJURY AND/OR DAMAGE TO PROPERTY OR OTHER LOSS WHETHER DIRECT, INDIRECT,
INCIDENTAL, CONSEQUENTIAL OR OTHERWISE, BASED ON A CLAIM THAT THE PRODUCT
FAILED TO FUNCTION.
However, if the Manufacturer is held liable, whether directly or indirectly, for any loss or damage arising
under this limited warranty, THE MANUFACTURER'S MAXIMUM LIABILITY (IF ANY) SHALL NOT IN
ANY CASE EXCEED THE PURCHASE PRICE OF THE PRODUCT, which shall be fixed as liquidated
damages and not as a penalty, and shall be the complete and exclusive remedy against the Manufacturer.
When accepting the delivery of the Product, the Purchaser agrees to the said conditions of sale and
warranty and he recognizes having been informed of.
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so these
limitations may not apply under certain circumstances.
The Manufacturer shall be under no liability whatsoever arising out of the corruption and/or malfunctioning
of any telecommunication or electronic equipment or any programs.
The Manufacturers obligations under this Warranty are limited solely to repair and/or replace at the
Manufacturer’s discretion any Product or part thereof that may prove defective. Any repair and/or
replacement shall not extend the original Warranty period. The Manufacturer shall not be responsible for
dismantling and/or reinstallation costs. To exercise this Warranty the Product must be returned to the
Manufacturer freight pre-paid and insured. All freight and insurance costs are the responsibility of the
Purchaser and are not included in this Warranty.
This warranty shall not be modified, varied or extended, and the Manufacturer does not authorize any
person to act on its behalf in the modification, variation or extension of this warranty. This warranty shall
apply to the Product only. All products, accessories or attachments of others used in conjunction with the
Product, including batteries, shall be covered solely by their own warranty, if any. The Manufacturer shall
not be liable for any damage or loss whatsoever, whether directly, indirectly, incidentally, consequentially
or otherwise, caused by the malfunction of the Product due to products, accessories, or attachments of
others, including batteries, used in conjunction with the Products. This Warranty is exclusive to the original
Purchaser and is not assignable.
This Warranty is in addition to and does not affect your legal rights. Any provision in this warranty which is
contrary to the Law in the state or country were the Product is supplied shall not apply.
Warning:The user must follow the Manufacturer’s installation and operational instructions including testing
the Product and its whole system at least once a week and to take all necessary precautions for his/her
safety and the protection of his/her property.
1/08
W.E.E.E. Product Recycling Declaration
For information regarding the recycling of this product you must contact the company from which you orignially purchased it. If you are discarding this product and not
returning it for repair then you must ensure that it is returned as identified by your supplier. This product is not to be thrown away with everyday waste.
Directive 2002/96/EC Waste Electrical and Electronic Equipment.
VISONIC LTD. (ISRAEL): P.O.B 22020 TEL-AVIV 61220 ISRAEL. PHONE: (972-3) 645-6789, FAX: (972-3) 645-6788
VISONIC INC. (U.S.A.): 10 NORTHWOOD DRIVE, BLOOMFIELD CT. 06002-1376. PHONE: (860) 243-0833, (800) 223-0020 FAX: (860) 242-8094
VISONIC LTD. (UK): FRASER ROAD, PRIORY BUSINESS PARK, BEDFORD MK44 3WH. PHONE: (0870) 7300800 FAX: (0870) 7300801
INTERNET: www.visonic.com
©VISONIC LTD. 2008
TOWER 20 AM MCW D-30160 (REV. 0, 3/08)
D-301620

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Count                      : 4
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:a2ad39ae-5ebc-465f-942e-5ba9de4dae77
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2009:08:04 17:28:47+03:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:08:04 17:29:37+03:00
Metadata Date                   : 2009:08:04 17:29:37+03:00
Document ID                     : uuid:0f12220d-0a5b-417e-8519-8b27bfd79cda
Format                          : application/pdf
Title                           : Microsoft Word - TOWER20MCW UserMan.doc
Creator                         : emceng7
Author                          : emceng7

EXIF Metadata provided by EXIF.tools