Volansys Technologies pvt GW6UL01M2M4 Modular IoT Gateway User Manual Proposal
Volansys Technologies pvt ltd Modular IoT Gateway Proposal
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3538509 |
| Application ID | VSGcR/x4FMc2LY0rU5E/ng== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 107.89kB (1348670 bits) |
| Date Submitted | 2017-08-31 00:00:00 |
| Date Available | 2018-02-27 00:00:00 |
| Creation Date | 2017-08-17 17:03:22 |
| Producing Software | Microsoft® Word 2013 |
| Document Lastmod | 2017-08-24 14:46:08 |
| Document Title | Proposal |
| Document Creator | Microsoft® Word 2013 |
| Document Author: | Administrator |
MODULAR IOT GATEWAY USER MANUAL “THE CUTTING EDGE MODULAR TECHNOLOGY ” Modular IoT Gateway User Manual Copyright Info The information contained in this document is the proprietary information of Volansys Technologies Pvt., Ltd. The contents are confidential and any disclosure to persons other than the officers, employees, agents or subcontractors of the owner or licensee of this document, without the prior written consent of Volansys, is strictly prohibited. Further, no portion of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, without the prior written consent of Volansys, the copyright holder. Volansys publishes this document without making any warranty as to the content contained herein. Further Volansys reserves the right to make modifications, additions and deletions to this document due to typographical errors, inaccurate information, or improvements to reference design platforms or products mentioned in the document at any time and without notice. Such changes will, nevertheless be incorporated into new editions of this document. Warranty For details on the Volansys Modular IoT Gateway warranty policy, please visit our website: www.volansys.com Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 2 Modular IoT Gateway User Manual TABLE OF CONTENTS REVISION HISTORY ........................................................................................................................................ 7 1.1 1.2 USING THIS MANUAL .................................................................................................................................... 8 2.1 2.2 REVISION HISTORY ............................................................................................................................................7 REFERENCES .....................................................................................................................................................7 PURPOSE AND AUDIENCE ....................................................................................................................................8 SUMMARY OF CHAPTERS .....................................................................................................................................8 OVERVIEW ..................................................................................................................................................... 9 3.1 KEY FEATURES ................................................................................................................................................10 3.2 USER CASES ...................................................................................................................................................11 3.3 PROTOCOL SUPPORT........................................................................................................................................11 3.4 ADDRESSES AND PORT NUMBERS .......................................................................................................................12 3.4.1 Hardware Address .................................................................................................................................12 3.4.2 IP Address ..............................................................................................................................................12 3.4.3 Port Numbers .........................................................................................................................................12 3.5 REFERENCE DESIGN PLATFORM INFORMATION LABEL ..............................................................................................12 REFERENCE DESIGN PLATFORM ARCHITECTURE AND INTERFACES .............................................................. 13 4.1 MEMORY, I/O PORTS AND EXTERNAL PERIPHERAL SUPPORT ....................................................................................14 4.1.1 DDR3 ......................................................................................................................................................14 4.1.2 NAND Flash ............................................................................................................................................14 4.1.3 Micro SD Card Slot .................................................................................................................................14 4.2 ETHERNET PORT .............................................................................................................................................14 4.3 USB PORTS ...................................................................................................................................................14 4.4 USB DEBUG PORT ..........................................................................................................................................15 4.5 WI-FI AND BLUETOOTH ....................................................................................................................................15 4.6 USER INTERFACE SWITCH ..................................................................................................................................15 4.6.1 Commissioning Switch (SW1) .................................................................................................................15 4.6.2 Reset Switch ...........................................................................................................................................16 4.7 USER LED INDICATIONS ...................................................................................................................................16 4.8 NFC CONTROLLER ...........................................................................................................................................16 4.9 MIKROBUS COMPATIBLE HEADERS .....................................................................................................................17 4.10 JN5179 ZIGBEE MODULE ................................................................................................................................17 4.11 MKW41Z THREAD+BLE MODULE ....................................................................................................................18 INSTALLATION OF GATEWAY ....................................................................................................................... 19 5.1 5.2 5.3 MODULAR IOT GATEWAY BOX CONTENT.............................................................................................................19 DEVICES INSIDE MODULAR IOT GATEWAY............................................................................................................19 USER REQUIRED ITEMS .....................................................................................................................................19 DEMO SETUP OF MODULAR IOT GATEWAY ................................................................................................. 20 CONTACT US AND SUPPORT ........................................................................................................................ 21 APPENDIX-A ................................................................................................................................................ 22 Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 3 Modular IoT Gateway User Manual 8.1 ACRONYMS & GLOSSARY ..................................................................................................................................22 APPENDIX-B ................................................................................................................................................ 23 9.1 9.2 COMPLIANCE..................................................................................................................................................23 ROHS, REACH COMPLIANCE ............................................................................................................................23 Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 4 Modular IoT Gateway User Manual List of Figures Figure 1 – Modular IoT Gateway .........................................................................................................9 Figure 2 - Modular IoT Gateway With Inbuilt Peripheral .................................................................... 10 Figure 3 – Modular IoT Gateway With Inbuilt Peripheral ................................................................... 11 Figure 4 – Reference Design platform information Label ................................................................... 12 Figure 5 – Architecture Block Diagram .............................................................................................. 13 Figure 6 – Inside view of Modular IoT Gateway ................................................................................. 13 Figure 7 – Reference design Platform interface details ...................................................................... 14 Figure 8 – Modular IoT Gateway Switches......................................................................................... 15 Figure 9 - NFC Controller .................................................................................................................. 16 Figure 10 - MikroBUS Header............................................................................................................ 17 Figure 11 - JN5179 Module ............................................................................................................... 17 Figure 12 - MKW41Z Module ............................................................................................................ 18 Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 5 Modular IoT Gateway User Manual List of Tables Table 1 - Revision History ...................................................................................................................7 Table 2 – References ..........................................................................................................................7 Table 3 - References ...........................................................................................................................8 Table 4 - Gateway USB Configuration ............................................................................................... 14 Table 5 - Terminal Settings ............................................................................................................... 15 Table 6 - User Interface Switch ......................................................................................................... 16 Table 7 - User LED Indications ........................................................................................................... 16 Table 8 – Modular IoT Gateway Reference design platform Content .................................................. 19 Table 9 - Modular IoT Gateway Unit Contents ................................................................................... 19 Table 10 – Other Require Equipment ................................................................................................ 19 Table 11 - Acronyms & Glossary ....................................................................................................... 22 Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 6 Modular IoT Gateway User Manual REVISION HISTORY 1.1 Revision History Rev. 0.1 Date 21-Nov-16 0.2 02-March-17 0.3 03-March-17 0.4 12-July-17 1.2 Description Prepared By Initial draft version Volansys released Updated based on Volansys review comments Updated based on Volansys review comments Added MKW41Z details Volansys and updated certification label details with new Gateway part# Table 1 - Revision History Reviewed By Volansys Approved By Volansys Volansys Volansys References Documents i.MX6UL Base Board Hardware User Guide Datasheet of JN5179 Module Datasheet/Product manual of MKW41Z Module Quick start Guide of PN7120 NFC Controller Board Table 2 – References Rev0.4 August 17, 2017 Confidential Volansys Technologies Revision 0.4 1.1 0.4 1.1 Copyright © 2016 Volansys Page | 7 Modular IoT Gateway User Manual 2.1 USING THIS MANUAL Purpose and Audience This document provides Introduction, key features, Reference design platform Architecture and interfaces, demo setup and use of Modular IoT Gateway. It is intended for the users who are configuring this Reference design platform. The user need to use this reference design platform in well controlled indoor environment. 2.2 Summary of chapters Chapter No. Chapter Overview Reference Design Architecture and Interfaces Installation of Gateway Describe details of List of content in box of Reference design platform and how to install it on field Demo Setup of Describes setup and configuration procedure with Wi-Fi and Modular IoT Gateway Ethernet using mobile application. Contact us and Instructions for contacting Volansys and Technical Support support details Appendix A Acronyms and Glossary – Full forms of used short names Appendix B Description Describes Introduction and key features and the protocols it supports. Includes technical specifications. Describes Hardware interface idea and wireless technology support details. Gateway compliance details Table 3 - References Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 8 Modular IoT Gateway User Manual OVERVIEW “Modular IoT Gateway” is a smart, modular, customizable, multi-service advance Reference Design Platform for Internet of Things. It is targeted for multiple use cases in various segments of IoT such as Smart Home, Buildings and Industries. Powered by industrial leading technologies, the Gateway is designed with Core features like Modular Hardware Design and Multi-Radio Connectivity (i.e. Wi-Fi, BLE, ZigBee, Thread and NFC). Figure 1 – Modular IoT Gateway The Modular IoT Gateway, based on advance processor i.MX6UltraLite introduces users to the assembled version of Gateway carrier and SoM board inside the platform. This gateway will help users to develop and run their IoT based concept using wireless interfaces like Wi-Fi, BLE, ZigBee, Thread and NFC easily and operate any supported devices wirelessly. It supports Wi-Fi and Ethernet for communication with cloud. The Modular IoT Gateway supports various versatile wireless hardware module through MikroBUS Header such as Volansys’ RF Modules and other MikroBUS standard supported modules. It also support new generation features PN7120 base NFC module, KW41Z based Thread+BLE module and NXP JN5179 ZigBee Module. Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 9 Modular IoT Gateway User Manual Figure 2 - Modular IoT Gateway With Inbuilt Peripheral 3.1 Key Features The following specifications are available in the Modular IoT Gateway Reference design platform: Power Supply o DC Jack for Input - 5V/3A from adaptor Processor o i.MX 6UltraLite applications processor with a 528 MHz ARM® Cortex®-A7 core Memory o 256MB DDR3L SDRAM o 1GB NAND Flash o Micro SD connector Ethernet o 1x 10/100Mbps Ethernet RJ-45 connector USB Port o 1x USB 2.0 Host connector o 1x USB 2.0 Host connector (Device mode support) Wireless Technology o Wi-Fi 802.11b/g/n and 802.15.1 BLEv4.0 compatible Wi-Fi + BT module from Murata o 802.15.4/ZigBee Module JN5179 o NFC module using PN7120 controller for commissioning o Thread+BLE Module MKW41Z Header Support o MikroBUS compatible header to support mikroBUS compatible Volansys’ RF modules & all other MikroBUS’ click modules which is universally accepted with same header compatibility Other I/O o 1x Debug port via USB micro-B connector o 1x Power LED, 2x Status LED o 1x User Switch (for commissioning), 1x reset Switch o JTAG connector Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 10 Modular IoT Gateway User Manual Dimension o 146.045 mm x 96.656 mm x 27.537 mm Weight o 250 Grams Operating Temperature and Humidity o 0 to 50 °C, 10% to 80% RH (Non-considering) Storage Temperature and Humidity o -10 to 50 °C, 5% to 80% RH (Non-considering) 3.2 User Cases Figure 3 – Modular IoT Gateway With Inbuilt Peripheral Volansys modular IoT gateway is central device to test gateway out of box. In this demo, user can control and monitor ZigBee/Thread end devices with help of mobile application. In order to use, Modular IoT Gateway, user needs to provide Internet connectivity to gateway board. The Gateway board support Ethernet and Wi-Fi interface for cloud connectivity. Gateway also support NFC commission. Using this NFC commission method user can provide Wi-Fi credential to Gateway and register them. User can seamlessly add ZigBee device in Gateway network by NFC commission method. Once End devices are added to Gateway’s network then user can control them remotely. Here note that the user need to use this reference design platform in well controlled indoor environment. 3.3 Protocol Support The Modular IoT Gateway contains a full-featured IP networking and wireless software stack: DHCP Client, DHCP Server, DHCPv6 Client uPnP (Discovery), LCAP (77FE), SSH, SSLv3/TLSv1, HTTP(S) IPv4/IPv6, TCP, UDP, ICMP, ARP, Auto-IP, DNS WPA/WPA2 Personal Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 11 Modular IoT Gateway User Manual 3.4 Addresses and Port Numbers 3.4.1 Hardware Address The hardware address is also referred to as the Ethernet address, physical address, or MAC address. The first three bytes of the Ethernet address are fixed and identify the unit as a volansys reference design platform. The fourth, fifth, and sixth bytes are unique numbers assigned to each unit. Sample ways hardware address may be represented: 00-80-A3-14-1B-18 00:80:A3:14:1B:18 3.4.2 IP Address Every device connected to an IP network must have a unique IPv4 address. This address references the specific unit. 3.4.3 Port Numbers Every TCP connection is defined by a destination and source IP Address, and a destination and source port number. For example, a Telnet server commonly uses TCP port number 23. The following is a list of the default server port numbers running on the Modular IoT Gateway: 3.5 TCP Port 22: SSH Server (Command Mode configuration) TCP Port 80: HTTP (Web Manager Configuration) Reference design platform information Label The Reference design platform information label on the device contains the following information about the specific unit: Company Logo Model Name Platform Part Number Serial Number and Barcode MAC Address and Barcode Power Rating FCC and CE certificate details e.g.: Figure 4 – Reference Design platform information Label Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 12 Modular IoT Gateway User Manual REFERENCE DESIGN PLATFORM ARCHITECTURE AND INTERFACES Modular IoT Gateway implements a variety of peripheral interfaces to connect with i.MX6UL based SoM Module. This section provides detailed information about different peripherals of Modular IoT Gateway. The architecture block diagram of Modular IoT Gateway board is shown as below: Figure 5 – Architecture Block Diagram The inside view of Modular IoT Gateway is shown in following figures, Figure 6 – Inside view of Modular IoT Gateway Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 13 Modular IoT Gateway User Manual 4.1 Memory, I/O Ports and external peripheral support 4.1.1 DDR3 Modular IoT Gateway is equipped with 256 MB DDR3L Memory which is upgradable up to 1 GB. 4.1.2 NAND Flash Gateway is available with on-board NAND (1GB) flash. 4.1.3 Micro SD Card Slot Micro SD slot (J18) is provided on Modular IoT Gateway. It is connected to USDHC1 interface of i.MX 6UltraLite on SoM Module. Figure 7 – Reference design Platform interface details 4.2 Ethernet Port Modular IoT Gateway incorporates a single full-featured 10/100 Ethernet interface, implemented with the i.MX6UL MAC-NET core in conjunction with a 10/100-Mbit/s MAC coupled with an on-board 10/100 PHY. The modular IoT Gateway comes with following features: Integrated PHY on SoM for 10/100 Mbps Auto-negotiation support Programmable MAC address 4.3 USB Ports The USB interface block provides two High speed USB port, which supports USB ver. 2.0. Initially both the connectors will act as host. User can configure USB-2(J17) port as device also by modifying jumpers setting. USB-1 (J16) will work as host only. Jumper setting for USB-2 port host and device mode are shown in below table: USB-2 HOST USB-2 DEVICE JUMPER 1 (J30) CLOSE OPEN JUMPER 2 (J29) OPEN CLOSE Table 4 - Gateway USB Configuration Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 14 Modular IoT Gateway User Manual When using serial download option for Boot, USB-2(J17) will be used in Device mode. It is required to change Jumper setting to enable device mode. 4.4 USB Debug Port The Modular IoT Gateway comes with one microUSB debug port support to simplify debugging mechanism. A CP2102, USB to serial UART IC is used to convert the UART signals to USB. A micro-B to standard A USB cable can be used. UART1 port is used as the debug port. The required terminal settings are shown in the following table: Baud Rate 115200 Data Bits Parity None Stop Bits Flow Control None Table 5 - Terminal Settings 4.5 Wi-Fi and Bluetooth Modular IoT Gateway provides support of Single Band (2.4GHz) Wi-Fi and Bluetooth using Murata’s LBEE5KLDX RF module on Gateway. The Modular IoT Gateway supports following features: Support of single band IEEE 802.11b/g/n Wi-Fi Bluetooth ver. 4.1 BLE Provides SDIO interface for Wi-Fi and UART interface for Bluetooth operation External u.fl connectors is connected with antenna line of module to provide external Whip antenna support 4.6 User Interface Switch 4.6.1 Commissioning Switch (SW1) SW1 is used to start/stop NFC commissioning mode. It is also used to power off the gateway board by long pressing it for more than 15 sec. Figure 8 – Modular IoT Gateway Switches Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 15 Modular IoT Gateway User Manual Different control mechanism for switch is provided as below: Switch SW1 Control Short Press ( >5sec & < 15sec) Long press (> 15sec) Last State Next State NFC Commission Window Off Start NFC commission window NFC Commission Window ON Stop NFC commission window Any Power off gateway board Table 6 - User Interface Switch 4.6.2 Reset Switch One reset switch is provided for user, to reboot the system without removing power supply. Pressing the switch will drive logic zero on RESETn signal, which will affects every modules on gateway. 4.7 User LED Indications Two dual color LEDs are used to provide indication about different Gateway functionalities. Below table indicates color mark to represent specific events. LED LED1 LED2 Behavior Green Red Orange Green Orange Blink fast for 10 times Blink slow for 5 times Table 7 - User LED Indications Represents Connected to cloud Not Connected to cloud Connecting to cloud Commission window is On Commission window is Off ED Commission successful ED Commission failed Note: User can change LEDs behavior based on their use case scenario. 4.8 NFC Controller Modular IoT gateway have NFC Module Header for NFC Connectivity. It’s have PN7120 NFC Controller from NXP Semiconductor. Figure 9 - NFC Controller Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 16 Modular IoT Gateway User Manual 4.9 MikroBus Compatible Headers Modular IoT Gateway contains two standard MikroBUS header which provides SPI, I2C & UART interface and other MikroBUS standard support signals. MikroBUS standard click board can be used with Modular IoT Gateway board. Below figure displays Standard MikroBUS socket position on Modular IoT Gateway board: Figure 10 - MikroBUS Header 4.10 JN5179 ZigBee Module NXP’s ZigBee module have JN5179 wireless controller which was low power supporting for ZigBee interface. JN5179 module supports following features: 2.4GHz IEEE802.15.4 compliant 512KB Flash 32KB RAM On board PCB Antenna Compact size: 14.5mm x 20.5mm TX power 8.5 dBm/10 dBm Receiver sensitivity –96 dBm TX current 24 mA at 10 dBm TX current 21.2 mA at 8.5 dBm RX current 14.3 mA at maximum input level –2 dBm 2.0 V/3.6 V operation Figure 11 - JN5179 Module Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 17 Modular IoT Gateway User Manual 4.11 MKW41Z Thread+BLE Module The MKW41Z module is ultra-compact, low power high sensitivity module. It is based on NXP’s MKW41Z512VHT4 SoC combined with Bluetooth Low energy and IEEE 802.15.4 network stacks like Thread, ZigBee pro etc. MKW41Z module supports following features: 32bit 48MHz ARM® Cortex-M0+ MCU 64KB SRAM 512KB Flash Integrated chip antenna Compact size: 19mm x 11.51mm x 3mm (L x W x H) Max Tx power: +3.5 dbm Typical Receiver Sensitivity (BLE) = -96 dBm Typical Receiver Sensitivity (802.15.4) = -100 dBm Integrated DC-DC Buck/boost converter, 0.9 V to 4.2 V operation Low Power Mode (VLLS0) Current: ≈180 nA On module 32MHz and 32KHz crystal Figure 12 - MKW41Z Module Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 18 Modular IoT Gateway User Manual INSTALLATION OF GATEWAY The Modular IoT Gateway comes with its required contents and it is mentioned in below section. 5.1 Modular IoT Gateway Box Content Modular IoT Gateway comes with following listed items: Item Description Modular IoT Gateway Unit Power Adapter Comes with External Antenna attached Documentation Quick Start Guide DC 5V, 3A – plug in with Gateway to power up Gateway Table 8 – Modular IoT Gateway Reference design platform Content 5.2 Devices inside Modular IoT Gateway Modular IoT Gateway has different peripherals support. It contains following peripherals to support different functionality and all must be installed inside Gateway: Item Base Board Description Based on i.MX6UL processor, 200-pin SO-DIMM standard supported module Multiple RF interface support with Volansys’ SoM NFC Module For commissioning of different modules JN5179 module Provides ZigBee interface support MKW41Z module Provides Thread+BLE interface support SoM Table 9 - Modular IoT Gateway Unit Contents 5.3 User required Items To complete your demo installation you need following items and it is not standard parts of Modular IoT Gateway. User needs to manage it. Item Description USB Cable USB Cable (micro B to standard A) Ethernet Cable To connect with network using Ethernet Micro SD Card Bootable Linux image NFC Tags To register/commission on network through Gateway Internet connectivity To connect Gateway via Ethernet or Wi-Fi Mobile Application To operate Gateway Windows PC To update firmware and get EUI-64 of FRDM-KW24D512 Table 10 – Other Require Equipment Note: Recommended Ethernet cable length is 3mm or less. Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 19 Modular IoT Gateway User Manual DEMO SETUP OF MODULAR IOT GATEWAY Kindly refer Modular IoT Gateway OOB Demo Setup Guide-v1.1 for Demo setup and configuration. Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 20 Modular IoT Gateway User Manual CONTACT US AND SUPPORT INDIA Office: Block A - 7th Floor, Safal Profitaire, Corporate Road, Prahaladnagar, Ahmedabad, Gujarat 380015 Phone: + 91-79-40041994. USA Office: 3080 Olcott St. Suite D235 Santa Clara CA – 95054. Phone: +1 510 358 4310 E-mail: sales@volansys.com Volansys offers many resources to support our customers and reference design platforms at Website: www.volansys.com For instance, you can ask a question and other technical details related to reference design platforms at our website. At this site you can also find FAQs, bulletins, warranty information, extended support services and Reference design platform documentation. To contact technical support or sales, look up your local office at: http://volansys.com/contact/ When you report a problem, please provide the Following information: Your name, company name, address, and phone number Description of the problem Status of the unit when the problem occurred. Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 21 Modular IoT Gateway User Manual 8.1 APPENDIX-A Acronyms & Glossary The following terms are used in this document Sr No# Terms Definition 1. BLE/BT Bluetooth Low Energy/Bluetooth 2. eMMC Embedded Multimedia Card 3. GPIO General Purpose Input and Output 4. GPS Global Positioning System 5. GSM Global System for Mobile Communication 6. I2C Inter Integrated Circuit 7. IoT Internet Of Things 8. JTAG Joint Test Action Group 9. LDO Low Dropout 10. LED Light Emitting Diode 11. MCU Microcontroller Unit 12. NFC Near Field Communication 13. PMIC Power Management Integrated Circuits 14. SDRAM Synchronous Dynamic Random Access Memory 15. SMA Subminiature version A 16. SoC System on Chip 17. SoM Systems On Module 18. SPI Serial Peripheral Interface 19. TBD To Be Define 20. U.FL Ultra-Miniature RF Connector 21. UART Universal Asynchronous receiver and Transmitter 22. USB Universal Serial Bus Table 11 - Acronyms & Glossary Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 22 Modular IoT Gateway User Manual 9.1 APPENDIX-B Compliance (According to ISO/IEC Guide and EN 45014) Reference Design Platform Name Model: Modular IoT Gateway Conforms to the following standards or other normative documents: Safety EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 Emissions CFR Title 47 FCC Part 15, Subpart B, Class A Emissions EN55022: 2010, Class A Emissions CISPR 22: 2009, Class A Emissions Immunity EN55024: 2010 EN610000-4-2: 2009 EN61000-4-3: 2006 + A1: 2008 + A2: 2010 EN61000-4-4: 2004 EN61000-4-5: 2005 EN61000-4-6: 2009 EN61000-4-8: 2010 EN61000-4-11: 2004 CISPR 16-1-4: 2008 ICES-0003 Issue 6 9.2 RoHS, REACH Compliance Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 23 Modular IoT Gateway User Manual FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. RF Exposure Information This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. ISED Notice This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. IC: 22256-GW6UL01M2M4 Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 24 Modular IoT Gateway User Manual ISED RF Exposure Statement This device complies with ISED RSS-102 RF exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the IC RSS-102 RF exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Cet appareil est conforme aux limites d'exposition aux rayonnements de la CNR-102 définies pour un environnement non contrôlé. Afin d'éviter la possibilité de dépasser les limites d'exposition aux fréquences radio de la CNR-102, la proximité humaine à l'antenne ne doit pas être inférieure à 20 cm (8 pouces) pendant le fonctionnement normal. Rev0.4 August 17, 2017 Confidential Volansys Technologies Copyright © 2016 Volansys Page | 25
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : Administrator Create Date : 2017:08:17 17:03:22+05:30 Creator : Microsoft® Word 2013 Modify Date : 2017:08:24 14:46:08+08:00 Producer : Microsoft® Word 2013 Title : Proposal Has XFA : No Language : en-IN Tagged PDF : Yes Page Count : 25EXIF Metadata provided by EXIF.tools