Voxx Accessories PNP100 Projector Bluetooth Speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2975526
Application ID	KRjzGMfg6bDb3L5GBO4asw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	88.93kB (1111641 bits)
Date Submitted	2016-04-29 00:00:00
Date Available	2016-04-29 00:00:00
Creation Date	2016-04-12 11:03:35
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2016-04-12 11:03:41
Document Title	User manual
Document Creator	Adobe InDesign CC 2015 (Macintosh)

What’s in the box?
(1) Projector
2. LOAD AN IMAGE WHEEL
(1) Power adapter
(3) Image wheels
Getting started
Run the cable through the
cable trough on the bottom
of the projector. Then place
the projector on a flat
surface.
Plug the other end of
the power adapter into a
working outlet or surge
protector.
Back of the projector
Take out the wheel drawer
above the image wheel door.
1. PLUG IN THE PROJECTOR
Plug the right-angle end of
the power adapter into the
DC IN jack on the bottom of
the projector.
On the back of the projector,
slide the image wheel door
into the FOR DISC ACCESS
position.
Bottom of the projector
Please an image wheel on
the wheel drawer. Make sure
the UP label is facing up.
Wheel drawer
Slide the image wheel
door up, into the FOR
PROJECTION position.
IMPORTANT: The projector
will not illuminate unless
the image wheel door is in
the up (FOR PROJECTION)
position.
To turn the projector on: Press the
PROJECTOR button on the front
of the projector.
Front of the projector
PLAYING SOUNDS
The Project Nursery Sight + Sound Projector offers a variety
of soothing lullabies and nature sounds, as well as white
noise, to calm baby.
To adjust brightness of the
projector (or turn it off): Press the
PROJECTOR button repeatedly to
cycle through the settings (high,
medium, low, and off).
4. ADJUST THE PROJECTOR POSITION
Make sure the image wheel door
on the back of the projector is in
the FOR PROJECTION position
(pushed up).
Put the wheel drawer back
into the image wheel door.
Cable trough
Everyday use
3. TURN ON THE PROJECTOR
Image wheel door
(down position)
Pull the projector lever below the
image wheel door to adjust the
projector position so that it points
where you want.
Back of the projector
To cycle through these
sounds: Press the SOUND
button on the front of the
projector. Each press goes to
a different selection.
To adjust the volume: Press
the VOLUME – or + button.
To turn sounds off: Press the
SOUND OFF button on the
top of the projector
Image wheel door
(up position)
Projector lever
Front of the projector
Bluetooth Wireless Connection Tips
PAIRING WITH YOUR PHONE
(BLUETOOTH)
The Project Nursery Sight & Sound Projector can also play
music from your smartphone or other Bluetooth device.
Here’s how to set it up.
Press and hold the
BLUETOOTH button on the
front of the projector until
the indicator light next to
this button starts blinking.
Front of the projector
Indicator
• Make sure the Bluetooth capability of your device is turned on.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10
meters). This range may vary, however, based on other factors, such as room
layout, wall material, obstacles, your device’s Bluetooth performance, etc. If
you’re having problems connecting to this speaker, move closer to it.
• If your device asks you for a password to connect, use “0000”.
USING THE TIMER
The timer shuts the projector
and sound off automatically
after a set amount of time.
Enable Bluetooth on your
smartphone or other device
(if it isn’t already enabled).
To set the timer: Press the
TIMER button on the front of
the projector.
Choose “Sight+Sound” from the list of pairing options on
your smartphone. (If it’s not in the list, choose “Scan” from
your phone’s Bluetooth menu.)
The TIMER indicator on the
top front of the projector
shows the amount of time
on the timer: 15, 30, or 60
minutes.
The speaker gives an audio signal when it’s finished pairing and
connecting to your smartphone. The indicator turns solid blue.
Note: The process of enabling Bluetooth and connecting varies from device to
device. See your device’s owners manual for more information and specific
instructions.
Press TIMER to cycle
through these options or
turn the timer off.
Front of the projector
USING THE LIGHT
Front of the projector
The front of the Sight & Sound
Projector offers soft area
illumination in three levels of
brightness, to complement the
projector lighting.
To turn the light on: Press the
LIGHT button on the front of the
projector.
To adjust or turn off the light:
Press the LIGHT button repeatedly
to cycle through the settings (high,
medium, low, and off).
Quick Start Guide
Questions?
Just call 1-844-393-7338 or visit ProjectNursery.com
©2016 Voxx Accessories Corp.
3502 Woodview Trace, Suite 220
Indianapolis, IN 46268
PNP100 QSG 00

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 5.6-c111 79.158366, 2015/09/25-01:12:00
Create Date                     : 2016:04:12 11:03:35-04:00
Metadata Date                   : 2016:04:12 11:03:41-04:00
Modify Date                     : 2016:04:12 11:03:41-04:00
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Instance ID                     : uuid:6465c184-f0fe-e746-adfd-3ab1e8ac462e
Original Document ID            : xmp.did:56786c60-12c9-4e2e-bf86-25e15c273935
Document ID                     : xmp.id:3102b622-9414-4b18-8bee-a9e6cdd2bc9a
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:362a80d9-f56d-44d9-a970-c6eab336c467
Derived From Document ID        : xmp.did:ab452e72-17a0-410c-8b3b-1bafc15415f2
Derived From Original Document ID: xmp.did:56786c60-12c9-4e2e-bf86-25e15c273935
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Macintosh)
History Changed                 : /
History When                    : 2016:04:12 11:03:36-04:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 3
Creator                         : Adobe InDesign CC 2015 (Macintosh)

EXIF Metadata provided by EXIF.tools