Voxx Electronics DEI489 2 Way LCD Security User Manual Blister Card Clifford 489X 11 04

DEI Headquarters, Inc. 2 Way LCD Security Blister Card Clifford 489X 11 04

manual

The Science of Security™featuring CClliiffffoorrdd  RReessppoonnddeerr  PN 489XCompatible with thefollowing systems:1100..55
Standard ConfigurationA remote that has been programmed to an standardconfiguration will use separate buttons for arm anddisarm similar to a factory keyless entry. Using theexpanded configuration, the transmitter buttons areassigned to the following functions:Lock Icon ButtonThe lock icon button arms and locks the system.Unlock Icon ButtonThe unlock icon button disarms and unlocks the system.AUX Icon ButtonsThe AUX icon button operates channel 2.Siren (or Star) Icon ButtonThe siren (or star) icon button operates Panic only.Unlock and Lock (or Star) Icon ButtonsWhen pressed together, the lock and unlock (or star)icon buttons operate channel 3.P Button (on the back of the transmitter)Used for mult-car selection and also to enter theTransmitter's programming menu. (See Security/Remote Start manual for details).FCC/ID NoticeThis device complies with Part 15 of FCC rules.Operation is subject to the following conditions: (1) Thisdevice may not cause harmful interference, and (2) Thisdevice must accept any interference received, includinginterference that may cause undesired operation.CAUTION! Changes or modifications not expresslyapproved by the party responsible for compli-ance could void the user's authority to oper-ate this device.MADE IN TAIWAN©2004 Directed Electronics, Inc. Vista CA 92081All rights reserved. 11/04P/N 489X  11-04REPLACEMENT TRANSMITTERModel 489X, 4 Button Responder, HF, Stealth Code Remote1. Door. Open a door.2. Key. Turn the key to the ON position.3. Choose. Within 5 seconds press and release theValet/Program button the number of times corre-sponding to the desired channel listed below.Once you have selected the channel, press theValet/Program button once more and hold it. TheLED will flash the same number of times as thechannel selected and the siren (if connected) willchirp to confirm the selected channel. Do NOTrelease the button.4. Transmit. While holding the Valet/programbutton, press the button from the transmitter youwish to assign to that channel. The unit will chirp(if horn or siren connected) to confirm that thetransmitter has been taught to the receiver 5. Release. Once the code is learned you can releasethe Valet/Program button and remove the key.The following Learn Routine can be used to programthis replacement transmitter to the system. In order toenter the Learn Routine, the system’s Valet/Programswitch must be plugged into the BLUE port.Channel Number   Functionwithout remote start1 Auto-learn Standard Configuration11 Delete All Transmitters
P/N 489PPython Responder 2-Way TransmitterfeaturingReplacementTransmitterCompatible with thefollowing systems:PPyytthhoonn  990000
MADE IN TAIWAN©2004 Directed Electronics, Inc. Vista CA 92081All rights reserved.P/N 489P  11/04REPLACEMENT TRANSMITTERModel 489P, 4 Button Responder, HF, Stealth Code RemoteThe following Learn Routine can be used to programthis replacement transmitter to the system. In order toenter the Learn Routine, the system’s Valet/Programswitch must be plugged into the BLUE port.1. Door. Open a door.2. Key. Turn the key to the ON position.3. Choose. Within 5 seconds press and release theValet/Program button the number of times corre-sponding to the desired channel listed below.Once you have selected the channel, press theValet/Program button once more and hold it. TheLED will flash the same number of times as thechannel selected and the siren (if connected) willchirp to confirm the selected channel. Do NOTrelease the button.4. Transmit. While holding the Valet/programbutton, press the button from the transmitter youwish to assign to that channel. The unit will chirp(if horn or siren connected) to confirm that thetransmitter has been taught to the receiver 5. Release. Once the code is learned you can releasethe Valet/Program button and remove the key.Channel Number Functionwithout remote start1 Auto-learn Standard Configuration11 Delete All TransmittersStandard ConfigurationA remote that has been programmed to an standardconfiguration will use separate buttons for arm anddisarm similar to a factory keyless entry. Using theexpanded configuration, the transmitter buttons areassigned to the following functions:Lock Icon ButtonThe lock icon button arms and locks the system.Unlock Icon ButtonThe unlock icon button disarms and unlocks the system.AUX Icon ButtonsThe AUX icon button operates channel 2.Siren (or Star) Icon ButtonThe siren (or star) icon button operates Panic only.Unlock and Lock (or Star) Icon ButtonsWhen pressed together, the lock and unlock (or star)icon buttons operate channel 3.P Button (on the back of the transmitter)For multi-car selection and also Used to enter theTransmitter's programming menu. (See Security/Remote Start manual for details).FCC/ID NoticeThis device complies with Part 15 of FCC rules.Operation is subject to the following conditions: (1) Thisdevice may not cause harmful interference, and (2) Thisdevice must accept any interference received, includinginterference that may cause undesired operation.CAUTION! Changes or modifications not expresslyapproved by the party responsible for compli-ance could void the user's authority to oper-ate this device.
P/N 489VP/N 489VReplacementTransmitterfeaturingReplacementTransmitterCompatible with thefollowing systems:VViippeerr  55000000viper responder 2-way transmitterviper responder 2-way transmitter
MADE IN TAIWAN©2004 Directed Electronics, Inc. Vista CA 92081All rights reserved.P/N 489V  11/04REPLACEMENT TRANSMITTERModel 489V, 4 Button Responder, HF, Stealth Code RemoteThe following Learn Routine can be used to programthis replacement transmitter to the system. In order toenter the Learn Routine, the system’s Valet/Programswitch must be plugged into the BLUE port.1. Door. Open a door.2. Key. Turn the key to the ON position.3. Choose. Within 5 seconds press and release theValet/Program button the number of times corre-sponding to the desired channel listed below.Once you have selected the channel, press theValet/Program button once more and hold it. TheLED will flash the same number of times as thechannel selected and the siren (if connected) willchirp to confirm the selected channel. Do NOTrelease the button.4. Transmit. While holding the Valet/programbutton, press the button from the transmitter youwish to assign to that channel. The unit will chirp(if horn or siren connected) to confirm that thetransmitter has been taught to the receiver 5. Release. Once the code is learned you can releasethe Valet/Program button and remove the key.Channel Number   Function1 Auto-learn Standard Configuration11 Delete All TransmittersStandard ConfigurationA remote that has been programmed to an standardconfiguration will use separate buttons for arm anddisarm similar to a factory keyless entry. Using theexpanded configuration, the transmitter buttons areassigned to the following functions:Lock Icon ButtonThe lock icon button arms and locks the system.Unlock Icon ButtonThe unlock icon button disarms and unlocks the system.AUX Icon ButtonsThe AUX icon button operates channel 2.Siren (or Star) Icon ButtonThe siren (or star) icon button operates Panic only.Unlock and Lock (or Star) Icon ButtonsWhen pressed together, the lock and unlock (or star)icon buttons operate channel 3.P Button (on the back of the transmitter)Used for multicar selection and also to enter theTransmitter's programming menu. (See Security/Remote Start manual for details).FCC/ID NoticeThis device complies with Part 15 of FCC rules.Operation is subject to the following conditions: (1) Thisdevice may not cause harmful interference, and (2) Thisdevice must accept any interference received, includinginterference that may cause undesired operation.CAUTION! Changes or modifications not expresslyapproved by the party responsible for compli-ance could void the user's authority to oper-ate this device.

Navigation menu