Voxx Electronics DEI489 2 Way LCD Security User Manual Blister Card Clifford 489X 11 04
DEI Headquarters, Inc. 2 Way LCD Security Blister Card Clifford 489X 11 04
manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 536668 |
| Application ID | vRktl7Zwz8/0KpbqR4OlcA== |
| Document Description | manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 34.78kB (434717 bits) |
| Date Submitted | 2005-04-27 00:00:00 |
| Date Available | 2005-05-16 00:00:00 |
| Creation Date | 2004-11-19 07:55:27 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2005-04-27 14:55:10 |
| Document Title | Blister Card, Clifford 489X 11-04.qxd |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Paul.Wisiolek |
featuring Clifford Responder PN 489X The Science of Security™ Compatible with the following systems: 10.5 REPLACEMENT TRANSMITTER Model 489X, 4 Button Responder, HF, Stealth Code Remote The following Learn Routine can be used to program this replacement transmitter to the system. In order to 1. 2. 3. Door. Open a door. Key. Turn the key to the ON position. Choose. Within 5 seconds press and release the Valet/Program button the number of times corresponding to the desired channel listed below. Once you have selected the channel, press the Valet/Program button once more and hold it. The LED will flash the same number of times as the channel selected and the siren (if connected) will Channel Number enter the Learn Routine, the system’s Valet/Program switch must be plugged into the BLUE port. 4. 5. chirp to confirm the selected channel. Do NOT release the button. Transmit. While holding the Valet/program button, press the button from the transmitter you wish to assign to that channel. The unit will chirp (if horn or siren connected) to confirm that the transmitter has been taught to the receiver Release. Once the code is learned you can release the Valet/Program button and remove the key. Function without remote start 11 Auto-learn Standard Configuration Delete All Transmitters Standard Configuration Unlock and Lock (or Star) Icon Buttons A remote that has been programmed to an standard configuration will use separate buttons for arm and disarm similar to a factory keyless entry. Using the expanded configuration, the transmitter buttons are assigned to the following functions: When pressed together, the lock and unlock (or star) icon buttons operate channel 3. Lock Icon Button The lock icon button arms and locks the system. Unlock Icon Button The unlock icon button disarms and unlocks the system. AUX Icon Buttons The AUX icon button operates channel 2. Siren (or Star) Icon Button The siren (or star) icon button operates Panic only. P Button (on the back of the transmitter) Used for mult-car selection and also to enter the Transmitter's programming menu. (See Security/ Remote Start manual for details). FCC/ID Notice This device complies with Part 15 of FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION! Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. P/N 489X 11-04 MADE IN TAIWAN © 2004 Directed Electronics, Inc. Vista CA 92081 All rights reserved. 11/04 featuring Replacement Transmitter Python Responder 2-Way Transmitter P/N 489P Compatible with the following systems: Python 900 REPLACEMENT TRANSMITTER Model 489P, 4 Button Responder, HF, Stealth Code Remote The following Learn Routine can be used to program this replacement transmitter to the system. In order to 1. 2. 3. Door. Open a door. Key. Turn the key to the ON position. Choose. Within 5 seconds press and release the Valet/Program button the number of times corresponding to the desired channel listed below. Once you have selected the channel, press the Valet/Program button once more and hold it. The LED will flash the same number of times as the channel selected and the siren (if connected) will Channel Number enter the Learn Routine, the system’s Valet/Program switch must be plugged into the BLUE port. 4. 5. chirp to confirm the selected channel. Do NOT release the button. Transmit. While holding the Valet/program button, press the button from the transmitter you wish to assign to that channel. The unit will chirp (if horn or siren connected) to confirm that the transmitter has been taught to the receiver Release. Once the code is learned you can release the Valet/Program button and remove the key. Function without remote start 11 Standard Configuration A remote that has been programmed to an standard configuration will use separate buttons for arm and disarm similar to a factory keyless entry. Using the expanded configuration, the transmitter buttons are assigned to the following functions: Lock Icon Button The lock icon button arms and locks the system. Unlock Icon Button The unlock icon button disarms and unlocks the system. AUX Icon Buttons The AUX icon button operates channel 2. Siren (or Star) Icon Button The siren (or star) icon button operates Panic only. Auto-learn Standard Configuration Delete All Transmitters Unlock and Lock (or Star) Icon Buttons When pressed together, the lock and unlock (or star) icon buttons operate channel 3. P Button (on the back of the transmitter) For multi-car selection and also Used to enter the Transmitter's programming menu. (See Security/ Remote Start manual for details). FCC/ID Notice This device complies with Part 15 of FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION! Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. P/N 489P 11/04 MADE IN TAIWAN © 2004 Directed Electronics, Inc. Vista CA 92081 All rights reserved. featuring Replacement Transmitter viper responder 2-way transmitter P/N 489V Compatible with the following systems: Viper 5000 REPLACEMENT TRANSMITTER Model 489V, 4 Button Responder, HF, Stealth Code Remote The following Learn Routine can be used to program this replacement transmitter to the system. In order to 1. 2. 3. Door. Open a door. Key. Turn the key to the ON position. Choose. Within 5 seconds press and release the Valet/Program button the number of times corresponding to the desired channel listed below. Once you have selected the channel, press the Valet/Program button once more and hold it. The LED will flash the same number of times as the channel selected and the siren (if connected) will Channel Number 11 Standard Configuration A remote that has been programmed to an standard configuration will use separate buttons for arm and disarm similar to a factory keyless entry. Using the expanded configuration, the transmitter buttons are assigned to the following functions: Lock Icon Button The lock icon button arms and locks the system. Unlock Icon Button The unlock icon button disarms and unlocks the system. AUX Icon Buttons The AUX icon button operates channel 2. Siren (or Star) Icon Button The siren (or star) icon button operates Panic only. enter the Learn Routine, the system’s Valet/Program switch must be plugged into the BLUE port. 4. 5. chirp to confirm the selected channel. Do NOT release the button. Transmit. While holding the Valet/program button, press the button from the transmitter you wish to assign to that channel. The unit will chirp (if horn or siren connected) to confirm that the transmitter has been taught to the receiver Release. Once the code is learned you can release the Valet/Program button and remove the key. Function Auto-learn Standard Configuration Delete All Transmitters Unlock and Lock (or Star) Icon Buttons When pressed together, the lock and unlock (or star) icon buttons operate channel 3. P Button (on the back of the transmitter) Used for multicar selection and also to enter the Transmitter's programming menu. (See Security/ Remote Start manual for details). FCC/ID Notice This device complies with Part 15 of FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION! Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. P/N 489V 11/04 MADE IN TAIWAN © 2004 Directed Electronics, Inc. Vista CA 92081 All rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2005:04:27 14:55:10-07:00 Create Date : 2004:11:19 07:55:27-08:00 Page Count : 6 About : uuid:f6db1e30-160c-488d-96b4-cc612d27f09b Producer : Acrobat Distiller 6.0 (Windows) Creation Date : 2004:11:19 07:55:27-08:00 Mod Date : 2005:04:27 14:55:10-07:00 Author : Paul.Wisiolek Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2005:04:27 14:55:10-07:00 Document ID : uuid:50168997-94d9-467c-a9bc-f35e9bf2611c Format : application/pdf Title : Blister Card, Clifford 489X 11-04.qxd Creator : Paul.WisiolekEXIF Metadata provided by EXIF.tools