Contents
Installation
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 668850 |
| Application ID | lpbbL+lYjvGIKA28WCcxBA== |
| Document Description | Installation |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Microsoft Word - pdf |
| Filesize | 93.63kB (1170433 bits) |
| Date Submitted | 2006-06-14 00:00:00 |
| Date Available | 2006-06-13 00:00:00 |
| Creation Date | 2006-06-14 18:48:59 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2006-06-14 18:48:59 |
| Document Title | Microsoft Word - 668850.DOC |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Administrator |
Installation process of pole mount for V290 1. General The installation process shows the steps how to hang the V290 on Walls and poles. The V290 unit weight is about 12 Kg and not friendly with hard trembling and falling down there for the installer men have to be skilled with operation as details brlow. 2. Details part list of Pole mount kit Balloon Description No’ of parts Remarks V290 unit Main bracket V290 Pole mount hanging bracket Screw Hex HD SST 3/8-16U Washer SST Lock 3/8 Screw Hex HD SST 1/4-20U Spring Washer SST Lock 1/4 Washer SST Flat 1/4 Screw ¼ with Spring and Flat Washer Balloons No’ 6, 7, 8 10 Screw 3/8 with Spring Washer Balloons No’ 4, 5 11 Wall screws The weight of the V290 is 12-13Kg 3. Wall mounting procedure The procedure below shows the steps of hanging the V290 on the wall. The screws must be carrying a minimum of 15 Kg in stable position. 3.1 Assemble the Main bracket to the wall with 4 Wall screws verify the screws are tightly as well and the groove is upside, the description of the balloons see the table above section 2. 3.2 Assemble the spring washer and flat washer on the screws as shown the picture, the Balloon description see the table above section 2. 3.3 Assemble two screws (Balloon 9) in the side of V290 (with only 2-3 circles) as shown the pictures of front and rear side, the Balloon description see the table above section 2. 3.4 Assemble the V290 unit to the Main bracket by insert in very carefully the V290 from the top threw the groove in the way that the V290 hanged on the screws (Balloons 9). 3.5 Add two screws (balloon 9) to the bottom unit and close all the four screws tightly as well. 4. Pole mounting procedure The procedure below shows the steps of hanging the V290 on the pole. 4.1 Assemble the spring washer on the screws as shown the picture, the Balloon (4, 5, 10) description see the table above section 2. 4.2 Assemble the Main bracket to the pole with 4 screws (see Balloons 4, 5 and 10) connected to pole mount hanging bracket (balloon 3) and close the screws very tightly, verify the groove of the main bracket is upside, the description of the balloons see the table above section 2. 4.3 Assemble two screws (Balloon 9) in the side of V290 (with only 2-3 circles) as shown the pictures of front and rear side, the Balloon description see the table above section 2. 4.4 Assemble the V290 unit to the Main bracket by insert in very carefully the V290 from the top threw the groove in the way that the V290 hanged on the screws (Balloons 9). 4.5 Add two screws (balloon 9) to the bottom unit and close all the four screws tightly as well 5. Assemble GND wire with Ring terminal on the grounding screw (see the screw size in balloon 9of the table in section 2) that placed on the V290.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2006:06:14 18:48:59-04:00 Modify Date : 2006:06:14 18:48:59-04:00 Page Count : 9 Creation Date : 2006:06:14 22:48:59Z Mod Date : 2006:06:14 22:48:59Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : Administrator Metadata Date : 2006:06:14 22:48:59Z Creator : Administrator Title : Microsoft Word - 668850.DOCEXIF Metadata provided by EXIF.tools