WEIKING TECHNOLOGY BT36S BLUETOOTH SPEAKER User Manual

SHENZHEN WEIKING TECHNOLOGY CO.,LTD BLUETOOTH SPEAKER

User Manual

CHARGING/PLAYING:Standard USB port connects to all PC USB ports and AC adapters.1.  Connect USB charging cable (2) to speaker.2.  Connect USB plug to available USB port of computer (see Fig. 1).3.  Power indicator light (3) will show red while charging.4.  When charge is completed, unplug the USB cable from the speaker and the computer.5.  Connect the built-in  3.5 mm audio cable (5) to a laptop/audio device and turn the speaker ON. Note: Actual battery life will vary with use, settings and environmental conditions. Rechargeable batteries have a limited ( Fig. 1)ACCESSORY:1. Mini USB charging cable 2. User Manual PRODUCT DEMO:1.   2.   3.     4. indicati on lampUSB connector for chargeSwitchLine In cableOutput:3W ;Dimension:62*62*46.5mmDiameter of speaker:36mm,4ohmFrequency:180Hz-20KHz S/N: ±65dB Battery voltage:3.7VBattery capacity:500mAHBattery charging voltage:5v+-0.2vBattery charging time:3.5hours by USB Working time:2-5 hoursWorking Distance:10M(Distance vary with environment and Bluetooth devices)                                     Compliance with Bluetooth 2.0        Support A2DPV 1.2      Indication led status:      1)continuous blue led for Linein, Shiny blue led for               Bluetooth status;        2)Red indication for Charging status         3)Light off for full charging         SPECIFICATIONS:Connection with Bluetooth Speaker:1)BT speaker will have a sound (ding) out when switch it to the Bluetooth mode. Shiny blue led indication for connection to Bluetooth devices.             2)Start the Bluetooth on your devices and             search ."W-king" will show on the searching                 Bluetooth devices and press it and put the code               at "0000" to match the speaker.The speaker will               again have the "ding" sound which means the               match is succeded. Matching time is around 1               minutes .It is vary with different devices. It's             unnecessary to put the code next time .               3)Play the music on your mobile or other             Bluetooth devices if both speakers match your        mobile or other devices.               4)Switch off the Bluetooth speaker if don't use .                 5)Swi tch i t to th e "LINE IN" an d p lug th e 3.5  cable in to yo ur m obil e phon e or other audiodevices and play the music directly.OPERATION INSTRUCTION: Q&AQ&A1: speaker could not match the devices under             Bluetooth status                     1)Check if the speaker is under standby status. 2)Turn off other Bluetooth devices 3)Delete the   W-king   name and research ." "           Q&A2:Very low sound or distorted sound:Check                           your audio volumes and adjust to be the             suitable volumes.       Q&A3: Sound is cut-off instantly.                   1)Check if it is far away from working distance or               it have other obstacles between two devices.Bluetooth SpeakerBattery capacity:400mAH
Federal Communications Commission (FCC) StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.Consult the dealer or an experienced radio/TV technician for help.Warning: Changes or modifications made to this device not expressly approved bySHENZHEN WEIKING TECHNOLOGY CO.,LTD may void the FCC authorization tooperate this device.Note: The manufacturer is not responsible for any radio or tv interference caused byunauthorized modifications to this equipment. Such modifications could void the user’sauthority to operate the equipment.

Navigation menu