WEIKING TECHNOLOGY BT36S BLUETOOTH SPEAKER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1830362
Application ID	mIxWlRW7Bu2C9d2c4SuM7Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.55kB (356887 bits)
Date Submitted	2012-11-05 00:00:00
Date Available	2012-11-05 00:00:00
Creation Date	2012-10-31 18:02:45
Producing Software	doPDF Ver 7.3 Build 382 (Windows 7 Business Edition (SP 1) - Version: 6.1.7601 (x64))
Document Lastmod	2012-10-31 18:03:40
Document Title	User Manual

ACCESSORY:
1. Mini USB charging cable
2. User Manual
CHARGING/PLAYING:
Standard USB port connects to all PC USB ports and AC adapters.
1. Connect USB charging cable (2) to speaker.
2. Connect USB plug to available USB port of
computer (see Fig. 1).
PRODUCT DEMO:
( Fig. 1)
3. Power indicator light (3)
will show red while
charging.
4. When charge is
completed,
unplug the USB cable
from the speaker and
the computer.
Bluetooth Speaker
5. Connect the built-in
3.5 mm audio cable (5)
to a laptop/audio device
and turn the speaker
ON.
1. indicati on lamp
2. USB connector for charge
Note: Actual battery life will vary with use,
3. Switch
settings and environmental conditions.
Rechargeable batteries have a limited
4. Line In cable
SPECIFICATIONS:
Output:3W ;
Dimension:62*62*46.5mm
Diameter of speaker:36mm,4ohm
Frequency:180Hz-20KHz
S/N: ±65dB
Battery voltage:3.7V
capacity:400mAH
Battery capacity:500mAH
Battery charging voltage:5v+-0.2v
Battery charging time:3.5hours by USB
Working time:2-5 hours
Working Distance:10M(Distance vary with environment
and Bluetooth devices)
Compliance with Bluetooth 2.0
Support A2DPV 1.2
Indication led status:
1)continuous blue led for Linein, Shiny blue led for
Bluetooth status;
2)Red indication for Charging status
3)Light off for full charging
OPERATION INSTRUCTION:
Connection with Bluetooth Speaker:
1)BT speaker will have a sound (ding) out when
switch it to the Bluetooth mode. Shiny blue led
indication for connection to Bluetooth devices.
2)Start the Bluetooth on your devices and
search ."W-king" will show on the searching
Bluetooth devices and press it and put the code
at "0000" to match the speaker.The speaker will
again have the "ding" sound which means the
match is succeded. Matching time is around 1
minutes .It is vary with different devices. It's
unnecessary to put the code next time .
3)Play the music on your mobile or other
Bluetooth devices if both speakers match your
mobile or other devices.
4)Switch off the Bluetooth speaker if don't use .
5)Switch it to the "LINEIN" and plug the 3.5
cable into your mobile phone or other audio
devices and play the music directly.
Q&A
Q&A1: speaker could not match the devices under
Bluetooth status
1)Check if the speaker is under standby status.
2)Turn off other Bluetooth devices
3)Delete the " W-king" name and research .
Q&A2:Very low sound or distorted sound:Check
your audio volumes and adjust to be the
suitable volumes.
Q&A3: Sound is cut-off instantly.
1)Check if it is far away from working distance or
it have other obstacles between two devices.
Federal Communications Commission (FCC) Statement
Note: The manufacturer is not responsible for any radio or tv interference caused by
This device complies with part 15 of the FCC Rules. Operation is subject to the following
unauthorized modifications to this equipment. Such modifications could void the user’s
two conditions: (1) This device may not cause harmful interference, and (2) this device must
authority to operate the equipment.
accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device not expressly approved by
SHENZHEN WEIKING TECHNOLOGY CO.,LTD may void the FCC authorization to
operate this device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Mode                       : UseNone
XMP Toolkit                     : 3.1-701
Create Date                     : 2012:10:31 18:02:45+08:00
Modify Date                     : 2012:10:31 18:03:40+08:00
Metadata Date                   : 2012:10:31 18:03:40+08:00
Producer                        : doPDF Ver 7.3 Build 382 (Windows 7 Business Edition (SP 1) - Version: 6.1.7601 (x64))
Format                          : application/pdf
Document ID                     : uuid:e721f79b-a9c2-430b-ae50-bfbfb5a1b8ea
Instance ID                     : uuid:4f794082-bf48-45c2-b258-a5dd7b1bbca6
Page Count                      : 2
Page Layout                     : OneColumn

EXIF Metadata provided by EXIF.tools