WENZHOU MTLC ELECTRIC APPLIANCES JWF15R TR Duplex Receptacle User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3906065
Application ID	lzo5GDVraDufxFXTkbngow==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25kB (312541 bits)
Date Submitted	2018-06-29 00:00:00
Date Available	2018-07-03 00:00:00
Creation Date	2001-08-30 12:37:41
Producing Software	3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Document Lastmod	2018-06-29 10:41:51
Document Title	Users Manual
Document Creator	Adobe PageMaker 6.52
Document Author:	YB

INSTALLATION INSTRUCTIONS
WARNINGS AND CAUTIONS
JWF15R
Wireless Home Automation Control Device
with an Interchangeable Face Cover
15A Tamper Resistant
Duplex Receptacle
OPERATIONS
Be sure to read the instruction carefully before installation, and the manufacturer
will not be responsible for any product damage that does not follow the instruction
Always-on Receptacle
1. Wet hands are strictly prohibited.
2. Must work strictly according to the rated load.
3. Do not continue to work after self-disassembly of any nature and damage of
external forces.
LED Indicator
Program Button
Smart
Meter
Smart
Meter
INSTALLATION
This receptacle may be used in new installations or to replace an existing wall receptacle.
To replace the face
cover, just use a
flat screwdriver to
pry-off the
interchangeable plate.
WIFI Controlled Receptacle
WARNING: HIGH VOLTAGE-TO AVOID FIRE, SHOCK, OR DEATH,
TURN OFF THE POWER AT THE CIRCUIT BREAKER BEFORE YOU
INSTALLTHIS RECEPTACLE.
Manual Control
SPECIFICATIONS
Voltage.............................................................................................. 120VAC, 60Hz
Incandescent..................................................................................................1000W
Electronic Ballast...................................................................................................5A
Standard Ballast............................................................................................1200VA
Resistive................................................................................................1800W(15A)
Motor.............................................................................................................. 1/2 HP
Operating Temperature.........................................................32°F~104°F(0°C~40°C)
Wire Strip Length.................................................................................16mm(5/8 in.)
Supply Connection .............................................................................12 AWG wires
Screw Torque............................................................................................... 20 lbf-in
Protocol.........................................................................................IEEE 802.11b/g/n
Wireless Type............................................................................................... 2.4GHz
FEATURES
The program button on the WF15RM duplex receptacle allows the user to:
Wiring Diagram:
1. Manually turn ON the Module: press and release the program button. The Green
LED indicator will turn ON, and the appliance will turn ON. (Default)
2. Manually turn OFF the Module: press and release the program button. The Green
Neutral
Hot
Black
White
LED indicator will turn OFF, and the appliance will turn OFF.(Default)
Tuya Smart App Control
1. Download Tuya Smart app from the App Store or Google Play.
Ground
Green
Smart
Meter
Perfect replacement for regular receptacles, 120VAC, 15 Amp
Manual and Remote ON/OFF control of any connected lighting and other
electrical load
Interchangeable color face plate
Reduce energy consumption and enjoy Wireless Home Automation
Enhance the value and technology of your condominiums and homes
Indoor use only
1. For retrofit applications, remove the wall plate.
2. Warning!: Verify power is OFF before continuing.
3. Remove the existing receptacle from the box.
2. Connect mobile device to your 2.4GHz WIFI network. Please note this
Smart outlet can only be connected to 2.4GHz network.
4. Disconnect the wiring from the existing receptacle.
5. Connect the WIFI receptacle as shown in the wiring diagram: Black lead to hot
DESCRIPTION
The JWF15R (TR ) duplex receptacle is the perfect wireless manual and remote on
/off control replacement of any regular receptacles to control table and floor lamps,
small appliances and more. This receptacle provides two outlets, one can be controled
by WIFI, that just need download the free Tuya Smart App on your smartphone then
you can turns your devices on or off at any time or any where, and the other outlet
provides constant power. Also, this receptacle meets the 2011 NEC code requirements.
wire, white lead to neutral wire, green lead to ground wire.
6. Check connections to be sure they are tight and no bare conductors are exposed.
7. Insert the JWF15R receptacle into the standard outlet box carefully.
8. Make sure the JWF15R receptacle to the box using the supplied screws.
9. Attach the wall plate.
3. Launch Tuya and follow the in-app instructions to connect the WIFI outlet
10. Restore power at the circuit breaker.
-01-
-02-
to your network.
-03-
INSTALLATION INSTRUCTIONS
a. Login the Tuya
b. Click the button “+”
c. Select the "Electrical outlet"
2. This WIFI Outlet can only be paired with one phone device. If you want
multiple phones to control the WIFI Outlet, click the "profile" then chose
the " Device Sharing".
FCC COMPLIANCE STATEMENT
Federal Communication Commission Interference Statement
The equipment has been tested and found to comply with the limits for a class B
B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment uses, generates and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference
to radio communication. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
d. Click the bottom button
e. Enter your Wifi password
more of the following measures:
f. Finished
3. When the device fail to add in the App, please try to enter the AP mode.
Before enter the AP mode please press the top or bottom button 5 times
continuously, then press and hold at the sixth for 5 seconds then release,
the LED indicator in green and slowly blinks.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1. This device may not cause interference, and 2. This
device must accept any interference received, including interference that may
cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
4. When the device is finished add, this WIFI Outlet can be opened, closed,
countdown and timing.
with minimum distance 20cm between the radiator & your body.
RF Exposure: A distance of 20 cm shall be maintained between the antenna
and users, and the transmitter module may not be co-located with any other
transmitter or antenna.
OPERATION AND LED INDICATION
Non-modification Statement:
Press and release the program button above 5 seconds and the green indicator
will turn On and flashing that means the WIFI Outlet is connecting to the network.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
Please Note:
1. In the process of adding device, you must correctly select the router's WIFI
Quick Blinking Green: Connecting to the network.
Slow Blinking Green: AP mode.
Green bright after 2 seconds off: Connected to the network.
Soild Green: Network normaly or in standby mode.
Solid Blue: The duplex receptacle is switched on.
Off: The WIFI duplex receptacle is switched off.
WARRANTY INFORMATION
Our company warranties its products to be free of defects in materials and workmanship for a period of two(2) years. There are no obligations or liabilities on the
part of our company for consequential damages arising out of or in connection with
the use or performance of this product or other indirect damages with respect to loss
of property, revenue, or profit, or cost of remval, installation or reinstallation.
device name and fill in the correct WIFI password, otherwise the device will
not be able to add successfully.
-04-
Jun, 2018
-05-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : YB
Create Date                     : 2001:08:30 12:37:41+08:00
Modify Date                     : 2018:06:29 10:41:51+02:00
Subject                         : 
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Creator                         : YB
Description                     : 
Title                           : 
Creator Tool                    : Adobe PageMaker 6.52
Metadata Date                   : 2018:06:29 10:41:51+02:00
Keywords                        : 
Producer                        : 3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Document ID                     : uuid:9c5797d8-039b-4f7c-a572-9977e30b22cb
Instance ID                     : uuid:23b11c88-f6c7-42f0-ae4d-038c42752002
Page Count                      : 2

EXIF Metadata provided by EXIF.tools