WINIA Electronics 7NFCMC529B User Manual 529B EN

Dongbu Daewoo Electronics Corporation 529B EN

Users Manual

Download: WINIA Electronics 7NFCMC529B User Manual 529B EN
Mirror Download [FCC.gov]WINIA Electronics 7NFCMC529B User Manual 529B EN
Document ID38322
Application IDexbDrTb2tM54x+HyxsPOUA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize12.03kB (150343 bits)
Date Submitted1999-05-20 00:00:00
Date Available1999-06-28 00:00:00
Creation Date1999-05-19 10:27:32
Producing SoftwareAcrobat Distiller 3.01 for Power Macintosh
Document Lastmod1999-05-19 09:24:27
Document Title529B EN
Document CreatorQuarkXPress3.3K: LaserWriter 8 KH1-8.2.3
Document Author: 7300

USER’S GUIDE
COLOR MONITOR
Model No : 529B
IMPORTANT SAFEGUARDS
1. Read all of these instructions.
2. Save these instructions for later use.
3. Unplug this monitor from the
wall outlet before cleaning. Do not
use liquid cleaners or aerosol
cleaners. Use a damp cloth for
cleaning.
4. Do not use attachments not recommended by
the monitor manufacturer as they may cause
hazards.
5. Do not use this monitor near water, e.g., near a
bathtub, washbowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool, etc.
6. Do not place this monitor on an
unstable cart, stand, or table. The
monitor may fall, causing serious
injury to a child or adult, and
serious damage to the appliance.
7. Slots and openings in the
cabinet and the back or bottom are
provided for ventilation, to ensure
reliable operation of the monitor,
and to protect it from overheating.
These openings must not be blocked or covered.
The openings should never be blocked by
placing the monitor on a bed, sofa, rug, or other
similar surface. This monitor should never be
placed near or over a radiator or heat register.
This monitor should not be placed in a built-in
installation such as a bookcase unless proper
ventilation is provided.
8. This monitor should be operated
only from the type of power source
indicated on the marking label. If
you are not sure of the power
supplied to your home, consult
your monitor dealer or local power company.
9. This monitor is equipped with a
3-wire grounding-type plug, That
is, a plug having a third
(grounding) pin. This plug will
only fit into a grounding-type
power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact
your electrician to replace your obsolete outlet.
Do not defeat the purpose of the grounding-type
plug.
10. Do not allow anything to rest
on the power cord. Do not locate
this monitor where the cord will be
abused by people walking on it.
11. Follow all warnings and instructions marked
on the monitor.
12. For added protection for this
monitor during a lightning storm,
or when it is left unattended and
unused for long periods of time,
unplug it from the wall outlet. This
will prevent damage to the monitor and/or the
computer due to lightning and power line surges.
13. Do not overload wall outlets and extension
cords as this can result in fire or electric shock.
14. Never push objects of any kind into this
monitor through cabinet slots, as they may touch
dangerous voltage points or short out parts that
could result in a fire or electric shock. Never spill
liquid of any kind on the monitor.
15. Do not attempt to service this
monitor yourself, as opening or
removing covers may expose you
to dangerous voltages or other
hazards. Refer all servicing to
qualified service personnel.
16. Unplug this monitor from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cuase harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio or TV technician for help.
a. When the power cord or plug is damaged or
frayed.
b. If liquid has been spilled into the monitor.
c. If the monitor has been exposed to rain or
water.
d. If the monitor does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore normal operation.
e. If the monitor has been dropped or the cabinet
has been damaged.
f. When the monitor exhibits a distinct change in
performance, this indicates a need for service.
17. When replacement parts are
required be sure the service
technician has used replacement
parts specified by the manufacturer
that have the same characteristics as
the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
18. Upon completion of any service or repairs to
this monitor, ask the service technician to
perform routine safety checks to determine that
the monitor is safe to operate.
CAUTION : Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate the equipment.
CANADIAN DEPARTMENT OF COMMUNICATIONS
COMPLIANCE STATEMENT
This digital apparatus does not exceed the Class A/Class B (whichever is
applicable) limits for radio noise emissions from digital apparatus set out in
the Radio Interference Regulations of the Canadian Department of
Communications.
Avis de conformité aux normes du Ministère des Communications du
Canada.
Le present appareil numérique n’emet pas de bruits radioélectriques
depassant les limites applicables aux appareils numériques de Class A/de
Class B (selon le cas) prescrites dans le règlement sur le brouillage
radioélectrique édicte par le ministère des communications du Canada.
WICHTIGE INFORMATIONEN
Bitte lesen Sie alle diese Informationen, bevor Sie das Gerät in
Betrieb nehmen! Lesen Sie sich außerdem die
Bedienungsanleitung komplett und sorgfältig durch, da nur in
diesem Fall eine problemlose Inbetriebnahme erwartet werden
kann.
•
Achten Sie darauf, daß das Gerät nur in eine 230V SchukoSteckdose eingesteckt wird.
•
Die Steckdose sollte jederzeit frei zugänglich sein um bei
einem evtl. auftretenden Notfall das Gerät schnell vom Netz
zu trennen.
•
Achten Sie desweiteren darauf, daß die Netzanschlußleitung
nicht mechanisch beansprucht oder sonstwie beschädigt
wird.
•
Offnen Sie das Gerät niemals! Im Inneren befinden sich
Teile mit gefährlicher Spannung.
•
Bevor Sie das Gerät reinigen, ziehen Sie bitte den
Netzstecker aus der Steckdose. Säubern Sie dann das Gerät
mit einem feuchten (keinesfalls tropfnassen) Lappen.
•
Die in diesem Gerät entstehende Röntgenstrahlung ist
ausreichend abgeschirmt (Ortsdosisleistung in 0.1m
Abstand weniger als 1.0µ Sv/h). Beschleunigungsspannung
maximal 25kV.
•
Stellen Sie das Gerät an einem ergonomisch günstigen Ort
auf und sorgen Sie dafür, daß der Monitor mit nach GSVW-SG7 geprüfter Peripherie betrieben wird, da nur unter
diesen Umständen ein optimaler ergonomischer Betrieb des
Gerätes sichergestellt ist.
Falls Sie dennoch Fragen haben, auf die die
Bedienungsanleitung keine hinreichende Antwort geben kann,
so kontaktieren Sie bitte den nächsten Fachhändler.
Maschinenlärminformationsverordnung 3. GSGV, 18.01 1991:
Der arbeitsplatzbezogene Schalldruckpegel beträgt 70 dB (A)
oder wenigergemäß ISO 7779.
DECLARATION OF CONFORMITY
We, Manufacturer / Importer
DAEWOO ELECTRONICS CO., Ltd
541, 5-Ga, Namdaemoon-Ro, Jung-Gu
Seoul, Korea
declare under our sole responsibility that the product,
Color Display monitor
529B
to which this declaration relates is in conformity with
the following standard(s) or other normative document(s)
Safety : EN60950/1992/A1:1993/A2:1993
A3:1995/A4:1997
EMC : EN 55022/8.1994, EN 50082-1/1992
EN 60555 Part 2, 3/1987
following the provisions of 89/336 EEC-EMC Directive
and the provisions of 73/23 EEC-Low Voltage Directive.
Handed over by : S.Lee, Managing Director.
Display Business Division
June, 1999 Seoul Signature:
S.Lee, Managing Director.
Display Business Division.
DAEWOO ELECTRONICS Co., Ltd
Emission Characteristics Tested by SEMKO
A sample of this type has been tested and has shown
compliance with the guidelines in the swedish document
MPR II.
This product is also designed for IT power system with phase
to phase voltage of 230V.
The power cord is used as a main disconnect device.
Disconnect the power cord before servicing. The outlet must
be installed near the monitor and must be easily accessible.
As an ENERGY STAR Partner, Daewoo Electronics Co., Ltd.
has determined that this product meets the Energy Star
guidelines for energy efficiency.
The appliance is not intended for use by young children or
infirm persons without supervision ;
Young children should be supervised to ensure that they do not
play with the appliance.
CONTENTS
INTRODUCTION
Introduction ............................................................ 1
Product Features ................................................ 2
Setup ........................................................................ 3
Installing the Tilt/Swivel Stand ......................... 3
Connecting the Signal Cable and Power Cord .. 4
Power Management System .............................. 5
Display Data Channel for Plug and Play ........... 5
Operation and Adjustment ................................... 6
Specifications ........................................................ 10
Factory Preset Timings ........................................ 10
This manual explains how to correctly install, operate,
and get the best performance from your monitor. Please
read this user’s guide carefully before installing your
monitor, then keep it near your monitor for quick
reference.
First, please check that the contents of the box
corresponds with the following checklist :
•
•
•
•
•
Color monitor
Power cord
User’s Guide
Tilt/swivel stand
Warranty Card (Optional)
Troubleshooting .................................................... 11
Appendix
If any item is missing or damaged, please contact your
dealer. Please keep the box and packing materials so that
you may properly store or transport your monitor.
Description for D-sub Connector
English-1
PRODUCT FEATURES
•
The convenient and user-friendly on-screen display
allows for easy and accurate adjustments of horizontal
and vertical screen size and position, geometry, and
screen color.
•
The monitor supports a safe working environment in
strict compliance with the MPR II standard for low
emissions.
•
The monitor complies with the VESA Display Data
Channel (DDC) specification for Plug and Play
compatibility. Advanced microcircuitry makes setup
and configuration fast and effortless.
•
The monitor features Advanced Color Controls for
fine-tuning to meet your own personal tastes or
application requirements. Use the on-screen controls
to adjust the color temperature, RB gain value for the
best possible screen color and intensity.
•
Press the menu button and activate the Self-Diagnosis
menu to determine whether your monitor is
functioning normally, not receiving a signal or is
receiving a signal that is out of scanning range.
•
Activate the higher refresh rates of the monitor to
stabilize the screen and eliminate the annoying flicker
that contributes to eye-strain and headaches.
•
The “borderless” full-screen display capability works
under all graphic modes and provides a larger viewing
area than conventional monitors, giving you a better
picture with more workspace.
SETUP
INSTALLING THE TILT/SWIVEL STAND
1. Ensure that the power is off to the monitor.
2. Set the monitor face down with the underside facing
you. Please be careful not to scratch the monitor
screen.
3. Align the four hooks on the stand with the guide holes
on the bottom chassis of the monitor.
4. Insert the hooks into the guide holes.
5. Slide the tilt/swivel stand toward the front of the
monitor until the latch locks in position.
6. Turn the monitor and the stand upright.
Latch
If you want to remove the tilt/swivel stand on the monitor,
press the latch and pull the tilt/swivel stand toward the
back of the monitor. Lift the stand to separate.
English - 2
English-3
CONNECTING THE SIGNAL CABLE AND
POWER CORD
1. Turn off the computer and monitor.
2. Connect the 15 pin D-sub connector to the output port of
the video card in your computer.
3. Tighten the screws of the connector.
4. Plug the power cord into the AC receptacle located on
the back of the monitor.
5. Plug the other end of the power cord into the AC outlet.
POWER MANAGEMENT SYSTEM
If you use the monitor with a computer that complies
with the power-saving program, you can set the monitor
to go blank when the system has remained unused for a
period of time. To specify the period or to disable this
feature, set the system timeout field of the computer’s
system setup program or use special software for powersaving. See the computer user’s manual for the details of
using the system setup. While the monitor is in powersaving mode (blank screen), it consumes less power than
when it is in its normal state. The color of the power
LED will indicate the state. To restore the screen image,
press any key of your keyboard or move your mouse. If
the signal cable is connected loosely or disconnected, the
power-saving feature will not operate.
DISPLAY DATA CHANNEL FOR PLUG AND
PLAY
Signal Cable
If you use the monitor with a computer that complies
with DDC1/2B/CI of VESA, the host video card
automatically configures itself without your intervention
in a way that best fits the attached monitor. The Display
Data Channel(DDC) allows the monitor to inform the
host system about configuration information for optimum
use of the monitor. Use of the video card utility is not
required to match the resolutions and refresh rates of the
monitor and video card.
Power Cord
If your power cord is PC-to-Monitor type, plug the
other end of the power cord into the AC receptacle in
the computer.
English - 4
English-5
OPERATION & ADJUSTMENT
Key Process
Control Panel
• Move cursor to the right window on the OSD
window.
• Increase the value of any selected function.
• Move cursor to the left window on the OSD
window.
• Decrease the value of any selected function.
MENU
• Launch OSD(On-Screen Display) MENU window.
Start
• Move cursor to the high window on the OSD
window.
• Increase the value of V.size or V.center.
•
When you choose the icon
can exit the OSD screen.
on the OSD window, you
• Move cursor to the low window on the OSD
Hot Key
window.
• Decrease the value of V.size or V.center.
English - 6
BRIGHTNESS
CONTRAST
English-7
OSD Functions
ICON
Self Diagnosis
CONTROL
FUNCTIONS
PINCUSHION
Adjust the left and right margins for more
convex or more concave margins.
TRAPEZOID
Adjust the trapezoid of the screen by
moving the lines inward or outward.
PARALLELOGRAM Adjust the parallelogram when the screen
is leaning left or right.
H. CENTER &
V. CENTER
COLOR TEMP
Adjust the position of the display
horizontally (left or right) and vertically
(up or down).
Choose different preset color
temperatures or set your own customized
color parameters.
RED GAIN
Adjust the red gain.
BLUE GAIN
Adjust the blue gain.
H. SIZE &
Adjust the width (horizontal size) and the
height (vertical size) of the display.
V. SIZE
DEGAUSS
Degaussing keeps the monitor free from
unwanted magnetism that can result in
color impurity.
STATUS
Display horizontal & vertical frequency
and polarity.
LANGUAGE
Select language for OSD (5 languages).
RECALL
Reset the screen to the Factory Preset
Display Settings.
English - 8
When the monitor doesn’t display, if you press any key,
Self Diagnosis screen is displayed. Self Diagnosis
function checks if the status of the monitor is No Signal
or Out of range.
No Signal screen is displayed
when the D-Sub signal connector
is not connected or the status of
the monitor is on DPMS mode.
Out of Range screen is displayed
when the applied frequency is
under or over normal range.
Normal range
H : 30 - 70 KHz
V : 50 - 120 Hz
English-9
SPECIFICATIONS
TROUBLESHOOTING
CDT Size
Diagonal visible image area
Dot Pitch
Synchronization
Horizontal
Vertical
Plug and Play
Power Saving
Power Source
Power Consumption
Dimension-W x H x D
(set with stand)
Weight-unpacked
(lbs/Kg)
Operating Temperature
15-inch
14-inch
0.28 mm
30 - 70 KHz
50 - 120 Hz
DDC1/2B/CI
EPA, VESA DPMS, Nutek Compliant
100-240 Vac, 50/60Hz (Free Voltage)
80 W
366 x 381 x 400mm
Symptom
No picture.
Check
Check if power switch and computer power switch
are in the on position.
Check if the signal cable is correctly connected to
the video card.
Check if the pins of D subconnector are not bent.
Check if the computer is in the power- saving mode.
POWER LED is not Check if power switch is in the on position.
lit.
Check if the power cord is correctly connected.
27.6/12.5
10 ~ 40°C /50 ~ 104°F
FACTORY PRESET TIMINGS
Image is unstable.
Check if the signal cable is suitable to the video card.
Image is not
centered, too small
or too large.
Adjust H &V Size or H&V Position to get the proper
image.
Picture bounces or a Keep the devices that may cause electrical
wave pattern is
interference away from the monitor.
present in the
picture.
See the FCC information at the front cover of the
manual.
Resolution
(dots X lines)
H.Freq (KHz)
V.Freq(Hz)
VGA
640 X 480
31.5
60
Non-interlaced
VESA VGA 75
640 X 480
37.5
75
Non-interlaced
VGA
720 X 400
31.5
70
Non-interlaced
VESA 46K
800 X 600
46.9
75
Non-interlaced
Color looks blotchy.
Operate Degauss once.
VESA SVGA 85
800 X 600
53.7
85
Non-interlaced
Picture is blurred.
Adjust Contrast and Brightness.
VESA 60K
1024 X 768
60.0
75
Non-interlaced
VESA 1024/85
1024 X 768
68.7
85
Non-interlaced
VESA 1280/60
1280 X 1024
64.0
60
Non-interlaced
Mode
English - 10
Remark
Operate Degauss once.
Edges of available
area on the screen
are not straight.
Adjust Pincushion/Trapezoid.
English-11
APPENDIX
DESCRIPTION FOR D-SUB CONNECTOR
Pin
Signal
10
11
12
13
14
15
Red
Green
Blue
GND
GND
GND-Red
GND-Green
GND-Blue
+5Vdc
GND-H.Sync
GND-V.Sync
Bi-directional Data(SDA)
Horizontal Sync
Vertical Sync(VCLK)
Data Clock(SCL)
10
15
* GND=Ground
S/N : 9978627900

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 1999:05:19 10:27:32
Producer                        : Acrobat Distiller 3.01 for Power Macintosh
Author                          : 7300
Creator                         : QuarkXPress3.3K: LaserWriter 8 KH1-8.2.3
Title                           : 529B EN
Modify Date                     : 1999:05:19 09:24:27
Page Count                      : 11
EXIF Metadata provided by EXIF.tools
FCC ID Filing: C5F7NFCMC529B

Navigation menu