WOOSIM SYSTEMS PORTI-P40 Mobile Printer User Manual
Woosim System Inc. Mobile Printer Users Manual
Users Manual
GGGGGGGGGG GG MODEL PORTI-P40 (PANEL PRINTER) WOOSIM SYSTEMS Inc. #501, Daerung Technotown 3th, 448, Gasan-Dong, GeumChun-Ku, Seoul, Korea Tel : +82-2-2107-3700 Fax : +82-2-2107-3707 URL: http://www.woosim.com All specifications are subjected to change without notice G Copyright PORTI-P40 panel printer operator’s manual. Copyright Ꮧ2007 by Woosim Systems Inc. All rights reserved. The information contained in this manual is the property of Woosim Systems Inc. And may not be reproduced in whole or in part without the prior written permission of Woosim System Inc࣋ Trademark a registered trademark of Woosim Systems Inc. All other trademark are the properties of their respective companies. Caution Some semiconductor devices are easily damaged by static electricity. You should turn the printer “OFF”, before you connect or removed the cable on the rear side, in order to guard the printer against the static electricity. If the printer is damaged by the static electricity, you should turn the printer “OFF” Notice The contents of this manual are subject to change without notice. * Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. ࣞउउࢽऐऍंऀआःआऀࣾऑआऌऋऐࢽࣾएंࢽऐऒࣿइंऀऑंँࢽऑऌࢽऀअࣾऋऄंࢽऔआऑअऌऒऑࢽऋऌऑआऀंࢽ G aVVUUG YWW_TW^TW^G G Introduction The PORTI-P40 is an extremely simple and functional panel printer. It is the ideal solution for applications which require the immediate printing of data on a paper, whether they be of an industrial, professional or laboratory nature. Medical analyzer, Industrial instrument, Recorder, Geological analyzer, Underground analyzer, Chemical analyzer, Metallic analyzer, etc. G The general features of PORTI-P40 printer are as follows: X Ultra small size rack mount printer. X Very silent printing thru direct thermal printing method. X High speed(50mm/sec) X High resolution(203dpi : 8dots/mm). X Easier paper loading by CLAMSHELL design. X Support text and graphic printing. X Serial(UART, TTL) interface X Easier maintenance with self-diagnostics. X Flow control : Software (XON/XOFF) Hardware flow control not supported in printer. NOTE G : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet of a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for assistance. G aVVUUG YWW_TW^TW^G G Operating Precautions Please follow the precautions below to enjoy and maintain the full performance of the printer. X Using the Printer Ɣ Be careful not to drop or bump the printer on a hard surface. Ɣ Do not install the printer in direct sunlight or such areas. Suitable environment for the use of the printer is as follows : Operating temperature : -10°C to 40 °C Relative humidity : 10% to 90% (no condensation) Do not install the printer near devices that generate strong Ɣ electromagnetic fields such as a copy machine. Ɣ Do not remove or reinstall the communication cable during printing or transmission. G G G aVVUUG YWW_TW^TW^G CONTENTS 1. Outline ............................................................................................................................................6G 1.1. Model classifications .................................................................................................................6G 1.2. Product Part Number System.....................................................................................................7G 1.3. Specifications ............................................................................................................................8G 2. Setting up the printer ....................................................................................................................9G 2.1. Printer & Accessories ................................................................................................................9G 2.2. Printer Features........................................................................................................................10G 2.3. Installation ...............................................................................................................................11G 2.4. Replacing the paper roll...........................................................................................................12G 2.5. Setting operation mode............................................................................................................14G 2.6. Power supply ...........................................................................................................................17G 3. Interface........................................................................................................................................18G 3.1. Serial Interface.........................................................................................................................18G 4. Using the printer ..........................................................................................................................19G 4.1. Control panel ...........................................................................................................................19G 4.2. The self test..............................................................................................................................19G 5. Consumable Parts........................................................................................................................20G 5.1. Recommended paper ...............................................................................................................20G 5.2 Printing position .......................................................................................................................20G G aVVUUG YWW_TW^TW^G XUGvG XUXUGtGG PORTI–PG G OGPG G G OG G G PG G OG G G PG Model name Interface None : Serial(UART or TTL) Size of roll paper 40 : 57mm wide, 40 Ø Power None : DC 9V GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG G aVVUUG YWW_TW^TW^G XUYUGwGwGuGz G Model name Interface Spec. S40 SC30 W25 Wired Wireless RS-232C Bluetooth TTL IrDA USB HPIR RS-485 None Parallel None Example) 1. Porti-S40 2. Porti-SC30 Serial/Bluetooth Part No. ൽ S40/A1 Bluetooth Only Part No. ൽ SC30/Z1 G aVVUUG YWW_TW^TW^G XUZUGzG Item Specification Printing method Direct thermal line printing Characters per line 42cpl Character size Eng. : 9*24dots, 12*24dots Resolution 203dpi, 8dots/mm Print width 2-inch (48mm, 384dots) Printing speed 50mm/sec Dimensions 80 * 75 * 40 mm Weight 153g Interface Serial(UART, TTL) Paper supplied Thermal roll paper (57mm wide, 40ø) Kor. : 16*24dots, [24*24dots] (include PCB ) (including roll paper ) PDF417(2-dimension), Code128, Code39, I2/5, Code93 Barcode supplied UPC, EAN(KAN, JAN), CODABAR Receive buffer size 10K bytes Printing speed may be slower, depending on the data Note transmission speed and the combination of control commands. Input Power 9VDC, Standby 60mA and Max 3A (Standard model) Temperature -10°C ~ 70°C (storage) Environment conditions Humidity -10°C ~ 40°C (operating) MCBF (Mean Cycle Between failure) Mechanical Head 30% - 80% (operating) 10% - 90% (storage) 37,000,000 lines Approximately 50 Km G aVVUUG YWW_TW^TW^G YUGzGGGG YUXUGwGMGhG When unpacking your printer box make sure it contains the printer and all accessories. If any accessories are missing or damage, please contact your dealer for assistanceUG Porti-P40 Roll paper G aVVUUG YWW_TW^TW^G YUYUGwGmG G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G aVVUUG YWW_TW^TW^G XW YUZUGpG G aVVUUG YWW_TW^TW^G XX YU[UGyGGGG Note : Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly. 1. Make sure that the printer is not receiving data; otherwise, data may be lost. 2. Open the paper roll cover by applying your finger on both side of printer, push it up when the lock is released as shown in the drawing. 3. Remove the used paper roll core if there is one. 4. Insert the paper roll as shown. G aVVUUG YWW_TW^TW^G XY G 5. Be sure to note the correct direction that the paper comes off the roll. G G G G G G G G G G G G G G G G G G G 6. Pull out a small amount of paper and then close the cover as shown. G G G G G G G G G G G G G G G G 7. Tear off the paper as shown. G G ˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎˎG G aVVUUG YWW_TW^TW^G XZ YU\UGzGGG G G 1. Press the MODE Button until the Error Lamp twinkles 5 times. 2. Change the mode and option using the MODE Button according to the MODE (Table1). z MODE button : use for changing OPTION status. (Error Lamp) z FEED button : use for changing MODE status. (Power Lamp) Ex) The defaults of the printer are : UART/ 9600 bps/ 8 data bit / No parity / Density Low If a user wants to modify the defaults with Protocol UART / 38400 bps / 7 data bit/ even parity/ density high X Press MODE Button until Error Lamp twinkles 5 times and release the button. o You will see the Power Lamp twinkles one time and the Error Lamp twinkles one time. o Press the MODE Button one time and the Error Lamp twinkles twice. (The interface mode has set to Protocol UART mode.) G aVVUUG YWW_TW^TW^G X[ G X Press FEED button one time, Power Lamp twinkles twice and Error Lamp twinkles one time. o Press the MODE Button two times, and the Error Lamp twinkles three times. (The baud rate has set to 38,400 bps) X Press FEED Button one time, Power Lamp twinkles 3 times and Error Lamp twinkles 2 times. o Press MODE Button one time, Error Lamp twinkles one time. (The Data Bit has set to 7 Data bit) X Press FEED Button one time, Power Lamp twinkles 4 times and Error Lamp twinkles 1 time. o Press MODE Button one time, Error Lamp twinkles two times. (The Parity bit has set to Odd parity bit) X Press FEED Button two time, Power Lamp twinkles 6 times and Error Lamp twinkles 1 time. o Press MODE Button one time, Error Lamp twinkles 2 times after then press MODE Button again, the Error Lamp will twinkle 3 times. ( The Density has set to High) If all the mode have set, press the MODE Button and the FEED Button at the same time after then release the buttons at the same time. The printer will print out the mode status which has modified. (Protocol UART / 38400 bps/ 7 Data bit/ Odd parity/ 1 Stop Bit/Density high /Mark No Use) If the status is not correct, please try it again according to the procedure. G G G aVVUUG YWW_TW^TW^G X\ G G POWER Lamp ERROR Lamp (Green) (Red) Option UART Protocol UART 9600 bps 19200 bps 38400 bps 57600 bps 115200 bps 7 Data bit 8 Data bit No Parity Even Parity Odd Parity 1 Stop Bit 2 Stop Bit Density Low Density Medium Density High No use Use Low Medium1 Medium2 High Communication Port Baud Rate Data Bit Parity Bit Stop Bit Density Mark GGGGGG Sensor TABLE 1 G aVVUUG YWW_TW^TW^G X] G G YU]UGwG G The following specifications are requested for Power supply. INPUT : DC 9V / Max 3A Avoid using power supply which its power capacity of power current is extremely high. G aVVUUG YWW_TW^TW^G X^ G ZUGpG ZUXUGzGpG GThe Porti-P40 printer has a serial(UART or TTL) serial interface and power connector is connected by 6 pin female connector. In the following table, the signals present on the connector are listed: G G G G Pin no. Signal name Direction Function G G INPUT 9V/3A G G TxD Output Transmit Data G G RxD Input Receive Data N.C N.C GND Ground G G G G G G G G G G Applicable connector : MOLEX 5264-06P or equivalent. G G G G WARNING A wrong connection of power supply connector could be damage the printer. G aVVUUG YWW_TW^TW^G X_ [UG|GGG G G G G G G G G G G G G G G G G G G G G G G G G G G G G G [UXUGjGG G G G G X Button - FEED : When the printer is on, paper can be feed manually by pressing and holding the FEED button for more than one second. X Panel Lamp - POWER(Green) : Printer is ON and ready to receive data. - ERROR (Red) : Indicates a fault condition or a printer error. (i.e : no paper, paper cover opened. etc.) [UYUG{GGG The self test procedure will check most of the printer functions. For self test, turn on the power while holding down the FEED Button. The Self-Test checks the following : 1) Make sure paper roll has been installed properly. 2) The Self-Test prints the current printer status, which provides the control ROM version and the communication method setting. 3) After printing the current printer status, Self-Test will print a pattern using the built-in character set. 4) The Self-Test automatically ends. The printer is ready to receive data as soon as it completed the self test. G aVVUUG YWW_TW^TW^G X` \UGjGwG \UXUGyGG Type : Thermal Paper Paper width : 57mm Paper thickness : 60±5༁ Outer diameter : Ø40mm Recording side : Outside of roll G G Cautions 1. Do not paste the paper to the core. And the roll paper which has near end mark printing on its near end is recommended. 2. Chemicals or oil may change the color of paper, or printed characters may fade. 3. Change of paper color starts from approx . 70ఁ. Pay attention to heat, humidity and sun light. 4. Color of paper may be changed by being scratched by nail or hard metal, etc. \UYGwGG G aVVUUG YWW_TW^TW^G YW
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2008:07:18 17:11:42+09:00 Modify Date : 2008:07:21 17:01:26+09:00 Metadata Date : 2008:07:21 17:01:26+09:00 Creator Tool : PScript5.dll Version 5.2.2 Document ID : uuid:D09A28D6A054DD11AD21A322867FD8E1 Instance ID : uuid:469b08a6-ab21-4492-b7d1-cec0b2fafa4c Derived From Instance ID : uuid:dc05e302-0adc-43ac-aaf0-6ba2727019b4 Derived From Document ID : uuid:E306291D7054DD119778B49213D4F9F5 Format : application/pdf Title : Microsoft Word - PORTI-P40 240-?紐꾩쵄??doc Creator :EXIF Metadata provided by EXIF.toolsPage Count : 20 Author :