WOOSIM SYSTEMS PORTI-SM40-ABC THERMAL PRINTER User Manual
Woosim System Inc. THERMAL PRINTER
user manual
MODEL PORTI-SM40 (Mobile Printer) WOOSIM SYSTEMS Inc. #501, Daerung Technotown 3th, 448, Gasan-Dong, GeumChun-Ku, Seoul, Korea Tel : +82-2-2107-3700 Fax : +82-2-2107-3707 URL: http://www.woosim.com http://www.woosim.com Copyright Porti-SM40 Mobile printer operator’s manual. Copyright ⓒ2008 by Woosim Systems Inc. All rights reserved. The information contained in this manual is the property of Woosim Systems Inc. and may not be reproduced in whole or in part without the prior written permission of Woosim Systems Inc. Trademark a registered trademark of Woosim Systems Inc. All other trademark are the properties of their respective companies. Caution Some semiconductor devices are easily damaged by static electricity. You should turn the printer “OFF”, before you connect or removed the cable on the rear side, in order to guard the printer against the static electricity. If the printer is damaged by the static electricity, you should turn the printer “OFF” Notice ● The contents of this manual are subject to change without notice. ● Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. ● This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause underired operation. http://www.woosim.com Introduction The Porti-SM40 is the ideal solution for Mobile banking system , Retail, point of sales, Credit card Transaction, other traveling and mobile computing etc. The general features of Porti-SM40 printer are as follows: X Pocket size(80.5×113.5×46mm) X Light weight(300g) for true mobility X Very silent printing thru direct thermal printing method X High speed(80mm/sec, MAX) X UART(RS-232C or TTL), Bluetooth interface X Support Magnetic Stripe Reader & Smart card reader X Support Graphic LCD(128×32dots) with Blue LED Backlight X Support text and graphic printing X Support bit-image(logo), firmware download X Easier paper roll loading by CLAMSHELL design X One touch paper cover X Printer door open & Paper-out sensor X Microsoft Windows 98/ME/XP/2000 compatible. X In field programming – Update Firmware, Download Fonts and Logos X Support bit-image(logo) download. X Flow control : Software (XON/XOFF) ※ Hardware flow control not supported in printer. http://www.woosim.com Operating Precautions Please follow the precautions below to enjoy and maintain the full performance of the printer. X Using the Printer ● Be careful not to drop or bump the printer on a hard surface. ● Do not install the printer in direct sunlight or such areas. Suitable environment for the use of the printer is as follows: ◆ Operating temperature :-20°C to 55°C ◆ Relative humidity : 0% to 95% (No condensation) ● Do not install the printer near devices that generate strong electromagnetic fields such as a copy machine. ● Do not open the platen cover during printing . ● Do not remove or reinstall the communication cable during printing or transmission. ● Do not touch the connectors of the communication during printing. ● Switch the POWER OFF when not in use. ● Do not use alcohol or other solvent. ● The AC adapter, the battery charger and the battery pack may become warm when in use. This is normal and is not a malfunction. ● When the battery pack is used at low temperature, the length of time the printer can be used may be shortened. X Thermal Paper Handling ● Store the thermal paper in a cool, dry and dark place. ● Do not rub the paper with hard object. ● Do not leave the paper with hard object. ● Do not allow plastic film, erasers, or adhesive tape to touch the paper for long periods. ● Do not stack the thermal paper with diazo copies immediately after copying or wet-type copies. ● Do not use chemical glue. ● Always use the clean thermal paper. http://www.woosim.com CONTENTS Copyright .....................................................................................................................................2 Trademark ....................................................................................................................................2 Caution.........................................................................................................................................2 Operating Precautions ................................................................................................4 1. Outline. ...........................................................................................................................................7 1.1. Model classifications. ...............................................................................................................7 1.2. Product Part Number System. ...................................................................................................7 1.3. Specifications............................................................................................................................8 2. Setting up the printer. ..................................................................................................................10 2.1. Printer & Accessories .............................................................................................................10 2.2. Printer Features ....................................................................................................................... 11 2.3. Replacing paper roll. ...............................................................................................................13 2.4. Power supply ..........................................................................................................................14 2.4.1. Specified power supply. ...................................................................................................14 2.4.2. Installing the battery ........................................................................................................14 2.4.3. Recharging the battery pack.............................................................................................15 2.5. Set operation mode. ................................................................................................................16 3. Interface........................................................................................................................................19 3.1. UART(RS-232C or TTL)........................................................................................................19 3.2. Bluetooth ................................................................................................................................20 3.2.1 Bluetooth channel organized table ....................................................................................20 4. Smart Card Module .....................................................................................................................21 4.1. General Spec. ..........................................................................................................................21 4.2. Communication Protocol Sequence ........................................................................................22 4.2.1. Regular Operation ............................................................................................................22 4.2.2. Irregular Operation (Communication Error) ....................................................................22 5. Using the printer. .........................................................................................................................23 5.1. Control panel. .........................................................................................................................23 5.2. The self test. ............................................................................................................................24 http://www.woosim.com 6. Consumable Parts. .......................................................................................................................25 6.1. Recommended paper. ..............................................................................................................25 6.2. Printing position......................................................................................................................25 http://www.woosim.com 1. Outline. 1.1. Model classifications. PORTI–SM40 Model Interface None: UART/Bluetooth Power None : DC 8.4V 1.2. Product Part Number System. Model name S40 SC30 W25 Interface Spec. Wired Wireless RS-232C Bluetooth TTL IrDA USB None RS-485 Parallel None Example) 1. Porti-S40 Serial/Bluetooth Part No. ⇒ S40/A1 2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1 Note) The above table is the interface format which is supported. But some of the interfaces are not supported according to the product and please contact us, if you have any questions regarding the interface. http://www.woosim.com 1.3. Specifications. Item Specifications Print method Direct thermal line printing Characters per line 42cpl (MAX) Character size Eng. : 9×24dots, 12×24dots Kor. : 16×24dots, [24×24dots] Simplified/Traditional Chinese, Arabic, Cyrillic, Russian, Tukish, Greek, Optional Characters Japanese, Persian, Latin9 and Others upon request. Resolution 203dpi, 8dots/mm Print width 2-inch (48mm, 384dots) Print speed 80mm / sec (MAX) Dimension 80.5×113.5×46 mm Weight 300g (Including battery & roll paper) Interface UART(RS-232C or TTL) / Bluetooth Ver 2.1 + EDR Paper roll Thermal roll paper (57mm wide, 40ø) 1-dimension : Code128, EAN 128, Code39, I2/5, Code93 UPC, EAN, KAN, JAN, CODABAR Barcodes 2-dimension : PDF417, QR Code, DATA Matrix Memory MCU : 32bit RISC, FLASH : 4 Mbytes, RAM : 8 Mbytes Receive buffer size 1M bytes MSR ISO 7810 / 7811 / 7812 1&2 or 2&3 Track Reading ISO 7816 Compliant (EMV level 1 Certified) / Smart card reader T=0, T=1 support / 2 SAM (Security Application Module) LCD 128×32 Dots FSTN (Blue LED Backlight) Battery Rechargeable 7.4V DC/ 1,100mAh (Li-ion) Battery duration 1 hour continuous printing Input (100~250V AC, 50~60Hz) Battery charger Output(8.4VDC/0.8A), 4hours full charge time http://www.woosim.com Item Environment conditions MCBF(Mean Cycle Between Failure) Specifications Temperature -20°C ~ 55°C (operating) Humidity 0% - 95% (operating) Mechanical Head 37,000,000 lines Approximately 50 Km http://www.woosim.com 2. Setting up the printer. 2.1. Printer & Accessories Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. Battery Pack Paper Roll PORTI-SM40 Battery Charger ▼ OPTIONAL Extra Charger Communication Cable http://www.woosim.com Car Charger 10 2.2. Printer Features ▶ Part Name http://www.woosim.com 11 ▶ Dimensions http://www.woosim.com 12 2.3. Replacing paper roll. Note : Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly. 1. Make sure that the printer is not receiving data; otherwise, data may be lost. 2. Open the paper cover by placing your fingers under the paper cover lock and pull a paper cover lock open. 3. Insert a new paper roll as shown. 4. Tear the excess paper off using the edge of paper door as a tear bar. http://www.woosim.com 13 2.4. Power supply 2.4.1. Specified power supply. The following specification is requested for Power supply. Battery Charger : DC 8.4V/0.8A Avoid using power supply which its power capacity of power current is extremely high. 2.4.2. Installing the battery NOTE : ● Before installing or removing the battery pack, ensure the printer is OFF. ● If the printer is not used for long period of time, remove the battery pack from the printer. CAUTION : Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. ① To install battery pack, proceed as follows: - Insert the Battery pack in the direction of the arrow. ② Reverse the order to remove the battery pack. ③ The battery pack install into extra charger. - Insert the Battery pack in the direction of the arrow. http://www.woosim.com 14 2.4.3. Recharging the battery pack For recharging the battery pack, install the battery pack in the printer or the extra charger. Insert the Battery Charger to the charge connector of the printer or the extra charger. NOTE : ● While charging the printer, turn off the printer power. ● Do not remove the battery during charging. ● The battery is consumable parts and when purchasing, compared to the use hour is gradually decreases. (Warranty 6 month) ● If the printer is not used for a long time, unplug the power cord from the printer and outlet. ● The recharging time depends on the voltage level and ambient temperature of the battery. Normally, if takes about 4 to 5 hours to recharge a battery pack. ● You must use only the supplied adapter. ● Red Lamp : charging the battery. Green Lamp: charging is finished. http://www.woosim.com 15 2.5. Set operation mode. 1. Change the mode and option using the mode Code (Table1). z MODE button : changing Printer MODE status. z FEED button : changing OPTION status. 2. [Example] The defaults of the printer are : UART/ 9600 BPS/8 DATA BIT/ NO Parity/1 STOP BIT/ Density LOW If a user wants to modify the defaults with Bluetooth/38400 BPS/7 DATA BIT/Even Parity/2 STOP BIT/Density HIGH X Press MODE Button until Error Lamp twinkles 5 times. → You will see present COMMUNICATION mode in the LCD. → Press the MODE Button two times. (The interface mode has set to Bluetooth mode.) X Press FEED button one time. → You will see present BAUD RATE mode in the LCD. → Press MODE Button 2 times. (The baud rate has set to 38,400 bps) X Press FEED button one time. → You will see present DATA BIT mode in the LCD. → Press MODE Button one time. (The data bit has set to 7 data bit.) X Press FEED button one time. → You will see present PARITY BIT mode in the LCD. → Press MODE Button 2 times. (The parity bit has set to Even parity bit.) http://www.woosim.com 16 X Press FEED button one time. → You will see present STOP BIT mode in the LCD. → Press MODE Button one time. (The stop bit has set to 2 stop bit.) X Press FEED button one time. → You will see present DENSITY mode in the LCD. → Press MODE Button two times. (The density has set to high.) If all the mode have set, press the FEED Button and the MODE Button at the same time after then release the buttons at the same time. The printer will print out the mode status which has modified. (Bluetooth/38,400 BPS/ 7 DATA BIT/Even Parity/ 2 STOP BIT / Density HIGH) If the status is not correct, please try it again according to the procedure. http://www.woosim.com 17 Mode No. Printer Mode Option Option No. (Mode Button) (Feed Button) UART Communication UART (Protocol) Port Bluetooth Bluetooth (Protocol) 9600 bps 19200 bps 34800 bps 57600 bps 115200 bps 7 Data bit 8 Data bit No Parity Odd Parity Even Parity 1 Stop Bit 2 Stop Bit Low Density Medium Density High Density No use Use Sensor Low Sensor Medium 1 Sensor Medium 2 Sensor High Baud Rate Data Bit Parity Bit Stop Bit Density Mark Sensor
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2010:01:28 16:08:41+09:00 Create Date : 2010:01:28 10:06:37+09:00 Metadata Date : 2010:01:28 16:08:41+09:00 Format : application/pdf Title : Microsoft Word - Operator Manual Porti_SM40_100126_.doc Creator :EXIF Metadata provided by EXIF.toolsDocument ID : uuid:89ddb6b9-7dec-483e-8533-2aaf78f39869 Instance ID : uuid:631b1e34-57af-4fea-aa99-a23a048b19f8 Page Count : 27 Author :