WOOSIM SYSTEMS WSP-DT380 POS PRINTER User Manual

Woosim System Inc. POS PRINTER

User Manual

http://www.woosim.com MODEL WSP-DT380 WOOSIM SYSTEMS Inc. #501, Daerung Technotown 3th, 448, Gasan-Dong, GeumChun-Ku, Seoul, Korea Tel : +82-2-2107-3700 Fax : +82-2-2107-3707 URL: http://www.woosim.com (3inch POS Printer) Rev. 4.0 All specifications are subjected to change without notice.
WSP-DT380 Rev. 4.0 http://www.woosim.com 2  Copyright WSP-DT380 3inch POS printer operator’s manual. Copyright ⓒ2012 by Woosim Systems Inc. All rights reserved. The information contained in this manual is the property of Woosim Systems Inc. And may not be reproduced in whole or in part without the prior written permission of Woosim Systems Inc.  Trademark a registered trademark of Woosim Systems Inc. All other trademark are the properties of their respective companies.  Caution Some semiconductor devices are easily damaged by static electricity. You should turn the printer “OFF”, before you connect or removed the cable on the rear side, in order to guard the printer against the static electricity. If the printer is damaged by the static electricity, you should turn the printer “OFF”  Notice The contents of this manual are subject to change without notice.
WSP-DT380 Rev. 4.0 http://www.woosim.com 3  Introduction The WSP-DT380 is the ideal solution for POS system, kitchen printer, Electronic scale, Measuring equipment, Lottery etc. The general features of WSP-DT380 printer are as follows:  Very silent printing thru direct thermal printing method  High speed(170mm/sec, MAX)  USB, Bluetooth(Ver 2.1 + EDR) interface  Auto cutting  Support text and graphic printing  Support Magnetic Stripe Reader  Intuitive LED’s indicate Power(on/off), Error  Easier maintenance with self-diagnostics  Easier paper loading by CLAMSHELL design.  One touch paper cover  In field programming – Update Firmware, Download Fonts and Logos  Microsoft Windows XP / VISTA / 7 / 8 / CE / Linux / Android compatible.  Flow control : Software (XON/XOFF) ※ Hardware flow control not supported in printer
WSP-DT380 Rev. 4.0 http://www.woosim.com 4  Using the Printer ● Be careful not to drop or bump the printer on a hard surface. ● Do not install the printer in direct sunlight or such areas. Suitable environment for the use of the printer is as follows: ◆ Operating temperature :-10°C to 50°C ◆ Relative humidity : 30% to 85% ● Do not install the printer near devices that generate strong electromagnetic fields such as a copy machine. ● Do not open the platen cover during printing . ● Do not remove or reinstall the communication cable during printing or transmission. ● Do not touch the connectors of the communication during printing. ● Switch the POWER OFF when not in use. ● Do not use alcohol or other solvent. ● When the battery pack is used at low temperature, the length of time the printer can be used may be shortened.  Thermal Paper Handling ● Store the thermal paper in a cool, dry and dark place. ● Do not rub the paper with hard object. ● Do not leave the paper with hard object. ● Do not allow plastic film, erasers, or adhesive tape to touch the paper for long periods. ● Do not stack the thermal paper with diazo copies immediately after copying or wet-type copies. ● Do not use chemical glue. ● Always use the clean thermal paper.
WSP-DT380 Rev. 4.0 http://www.woosim.com 5 FCC ID : QDDWSP-DT380 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ㆍReorient or relocate the receiving antenna. ㆍIncrease the separation between the equipment and receiver. ㆍConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. ㆍConsult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void the user's authority to operated the equipment under FCC rules. This Device has been evaluated to comply with RF exposure requirement for general use limit in portable condition. It is safe to be used in sold condition.
WSP-DT380 Rev. 4.0 http://www.woosim.com 6 CONTENTS 1. Outline. .........................................................................................................................................7 1.1. Model classifications. ...........................................................................................................7 1.2. Product Part Number System .............................................................................................7 1.3. Specifications. ........................................................................................................................8 2. Setting up the printer. ............................................................................................................ 10 2.1. Printer & Accessories ......................................................................................................... 10 2.2. Printer Features ................................................................................................................... 11 2.3. Replacing paper roll. ........................................................................................................... 13 2.4. Power supply ........................................................................................................................ 14 2.4.1. Specified power supply. .............................................................................................. 14 2.5. Setting the DIP switches .................................................................................................... 14 3. Interface ...................................................................................................................................... 16 3.1. USB ........................................................................................................................................ 17 3.2. Bluetooth .............................................................................................................................. 18 3.3. Card Reading ....................................................................................................................... 19 4. Using the printer. ..................................................................................................................... 20 4.1. Control panel. ...................................................................................................................... 20 4.2. The self test. ......................................................................................................................... 21 5. Consumable Parts .................................................................................................................... 22 5.1. Recommended paper ......................................................................................................... 22 5.2. Printing position. ................................................................................................................. 22
WSP-DT380 Rev. 4.0 http://www.woosim.com 7 11.. OOuuttlliinnee.. 11..11.. MMooddeell ccllaassssiiffiiccaattiioonnss.. 11..22.. PPrroodduucctt PPaarrtt NNuummbbeerr SSyysstteemm WSP–DT380 ( ) ( ) Model Interface A0 : UART Power None : DC 24V/2.7A Model name / Interface Spec. Example) 1. Porti-S40 Serial/Bluetooth Part No. ⇒ S40/A1 2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1 S40 SC30 W25 . . . Wired Wireless A RS-232C 1 Bluetooth B TTL 2 IrDA C USB 0 None D RS-485 E Parallel Z None
WSP-DT380 Rev. 4.0 http://www.woosim.com 8 11..33.. SSppeecciiffiiccaattiioonnss.. Item Specifications Printing method Thermal dot line printing Characters per line 64cpl (MAX) Character size Eng. : 9*24dots, 12*24dots Kor. : 16*24dots, [24*24dots] Optional Characters Simplified/Traditional Chinese, Arabic, Cyrillic, Russian, Turkish, Greek, Japanese, Persian, Latin9 and Others upon request. Resolution W 8dots/mm X H 8 dots/mm Paper feed pitch 0.0625mm Print width 3-inch (72mm, 576dots) Printing speed 170mm / sec (MAX) Dimensions 126 * 165.5 * 108.2 mm Weight 801g Interface USB, Bluetooth Ver2.1 + EDR Paper supplied Thermal roll paper (80mm wide, 80ø) Barcode supplied 1-dimension : Code128, EAN 128, Code39, I2/5, Code93 UPC, EAN, KAN,JAN, CODABAR 2-dimension : PDF417, QR Code, DATA Matrix Driver Microsoft Widows XP / VISTA / 7 / 8 / Windows CE, Linux, Android OS driver compatible H/W Spec. MCU : 32bit RISC, FLASH : 4 Mbytes, RAM : 8 Mbytes Receive buffer size 1M bytes MSR ISO 7810 / 7811 / 7812 Triple tracks(1&2&3) Reading Paper cutting method Slide cutting Type of paper cutting Full cut and Partial cut (1.5±0.5mm tab left at the center) AC adapter Rated Voltage : AC 100-240V, 50-60Hz Capable of Supplying : +24VDC at 2.7A
WSP-DT380 Rev. 4.0 http://www.woosim.com 9 Item Specifications Environment conditions Temperature -10°C ~ 50°C (operating) -20°C ~ 60°C (storage) Humidity 30% - 85% (operating) Life span (at 25℃ and rated energy) Activation pulse resistance 100 million pulses or more Abrasion resistance 100km or more (excluding damage caused by dust and foreign materials) Paper cutting resistance 700,000 cuts or more
WSP-DT380 Rev. 4.0 http://www.woosim.com 10 22.. SSeettttiinngg uupp tthhee pprriinntteerr.. 22..11.. PPrriinntteerr && AAcccceessssoorriieess Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. WSP-DT380 Thermal roll paper AC Adapter
WSP-DT380 Rev. 4.0 http://www.woosim.com 11 22..22.. PPrriinntteerr FFeeaattuurreess ▶ Part Name
WSP-DT380 Rev. 4.0 http://www.woosim.com 12 ▶ Dimensions
WSP-DT380 Rev. 4.0 http://www.woosim.com 13 22..33.. RReeppllaacciinngg ppaappeerr rroollll.. 1. Make sure that the printer is not receiving data; otherwise, data may be lost. 2. Open the paper cover as the “One-Touch” way by pressing the button in the arrow direction like the picture. 3. Insert a new paper roll as shown. 4. Tear the excess paper off using the edge of paper door as a tear bar. Note : Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer can not detect the paper end correctly.
WSP-DT380 Rev. 4.0 http://www.woosim.com 14 22..44.. PPoowweerr ssuuppppllyy 22..44..11.. SSppeecciiffiieedd ppoowweerr ssuuppppllyy.. 22..55.. SSeettttiinngg tthhee DDIIPP sswwiittcchheess The following specification is requested for Power supply. Input : Rated Voltage : AC 100-240V, 50-60Hz Capable of Supplying : +24VDC at 2.7A Avoid using power supply which its power capacity of power current is extremely high. The DIP switches are located on the bottom of the printer. The DIP switches are used to set the printer to perform various functions. Follow these steps when changing DIP switches setting : 1. Turn the printer power switch off. 2. Turn the printer over and remove the DIP switch cover. 3. Move the DIP switches using tweezers or another narrow-ended tool. 4. The new setting takes effect when you turn on the printer.
WSP-DT380 Rev. 4.0 http://www.woosim.com 15 No DIP SWITCH No. 1 1 2 Off Off Density High Off On Density Medium On Off Density High On On Density Low 2 3 4 5 Off Off Off 1000000 Baud Rate On Off Off 500000 Baud Rate Off On Off 230400 Baud Rate On On Off 115200 Baud Rate Off Off On 57600 Baud Rate On Off On 38400 Baud Rate Off On On 19200 Baud Rate On On On 9600 Baud Rate 3 6 Off 8 Data Bit On 7 Data Bit 4 7 8 Off Off Odd Parity, 1 Stop Bit Off On Even Parity, 1Stop Bit On Off Odd Parity, 1 Stop Bit On On No Parity, 1 Stop Bit <DIP SWITCH Specification> NOTE : Always change DIP switch settings when the printer is turned off. Changes made with the power on have no effect until you turn the printer off and then on again.
WSP-DT380 Rev. 4.0 http://www.woosim.com 16 33.. IInntteerrffaaccee WARNING A wrong connection of power supply connector could be damage the printer. In the printer power off state Please connect the power supply.
WSP-DT380 Rev. 4.0 http://www.woosim.com 17 33..11.. UUSSBB USB Pin No. Signal Name Function 1 USB_VCC +5V 2 DM DATA ‘-’ 3 DP DATA ‘+’ 4 GND Ground < USB (B TYPE)> Drawer Kick-out Pin No. Signal Name Direction 1 Frame GND - 2 Drawer Kick-out driver signal 1 Output 3 Drawer open/close signal Input 4 +12V - 5 Drawer kick-out drive signal 2 Output 6 Signal GND - < MODULAR JACK - DK623PCB6P>
WSP-DT380 Rev. 4.0 http://www.woosim.com 18 33..22.. BBlluueettooootthh Category Specification Bluetooth Spec. Bluetooth Ver2.1 +EDR / Class2 (10m) Frequency Range 2.4GHz ISM BAND Data Transmission Rate 57600bps Fixed. Data bit 8 Data bit Fixed. Parity bit No parity Fixed. Stop bit 1 Stop bit Fixed.
WSP-DT380 Rev. 4.0 http://www.woosim.com 19 33..33.. CCaarrdd RReeaaddiinngg Please take notice that Magnetic Stripe Card should be swapped in direction of arrow. Card can be read in one direction.
WSP-DT380 Rev. 4.0 http://www.woosim.com 20 44.. UUssiinngg tthhee pprriinntteerr.. 44..11.. CCoonnttrrooll ppaanneell..  BUTTON - FEED : When the printer is on, paper can be feed manually by pressing and holding the FEED button for more than one second.  PANEL LAMP -POWER (Green) : Printer is ON and ready to receive data. -ERROR (Red) : Indicates a fault condition or a printer error. (i.e : no paper, paper cover opened. etc.) -PAPER (Red) : Indicates the shift time of the paper.
WSP-DT380 Rev. 4.0 http://www.woosim.com 21 44..22.. TThhee sseellff tteesstt.. The self test procedure will check most of the printer functions. For self test, turn on the power while holding down the FEED Button. The Self-Test checks the following : 1) Make sure paper roll has been installed properly. 2) The Self-Test prints the current printer status, which provides the control ROM version and the communication method setting. 3) After printing the current printer status, Self-Test will print a pattern using the built-in character set. 4) The Self-Test automatically ends. The printer is ready to receive data as soon as it completed the self test.
WSP-DT380 Rev. 4.0 http://www.woosim.com 22 55.. CCoonnssuummaabbllee PPaarrttss 55..11.. RReeccoommmmeennddeedd ppaappeerr 55..22.. PPrriinnttiinngg ppoossiittiioonn.. Type : Thermal Paper Paper width : 80mm Paper thickness : 60±5㎛ Outer diameter : Ø80mm or less Recording side : Outside of roll Cautions 1. Do not paste the paper to the core. And the roll paper which has near end mark printing on its near end is recommended. 2. Chemicals or oil may change the color of paper, or printed characters may fade. 3. Change of paper color starts from approx. 70℃. Pay attention to heat, humidity and sun light. 4. Color of paper may be changed by being scratched by nail or hard metal, etc.

Navigation menu