WOOSIM SYSTEMS WSP-DT380 POS PRINTER User Manual
Woosim System Inc. POS PRINTER
User Manual
MODEL WSP-DT380 (3inch POS Printer) Rev. 4.0 WOOSIM SYSTEMS Inc. #501, Daerung Technotown 3th, 448, Gasan-Dong, GeumChun-Ku, Seoul, Korea Tel : +82-2-2107-3700 Fax : +82-2-2107-3707 URL: http://www.woosim.com All specifications are subjected to change without notice. http://www.woosim.com WSP-DT380 Rev. 4.0 Copyright WSP-DT380 3inch POS printer operator s manual. Copyright ⓒ2012 by Woosim Systems Inc. All rights reserved. The information contained in this manual is the property of Woosim Systems Inc. And may not be reproduced in whole or in part without the prior written permission of Woosim Systems Inc. Trademark a registered trademark of Woosim Systems Inc. All other trademark are the properties of their respective companies. Caution Some semiconductor devices are easily damaged by static electricity. You should turn the printer OFF , before you connect or removed the cable on the rear side, in order to guard the printer against the static electricity. If the printer is damaged by the static electricity, you should turn the printer OFF Notice The contents of this manual are subject to change without notice. http://www.woosim.com WSP-DT380 Rev. 4.0 Introduction The WSP-DT380 is the ideal solution for POS system, kitchen printer, Electronic scale, Measuring equipment, Lottery etc. The general features of WSP-DT380 printer are as follows: Very silent printing thru direct thermal printing method High speed(170mm/sec, MAX) USB, Bluetooth(Ver 2.1 + EDR) interface Auto cutting Support text and graphic printing Support Magnetic Stripe Reader Intuitive LED s indicate Power(on/off), Error Easier maintenance with self-diagnostics Easier paper loading by CLAMSHELL design. One touch paper cover In field programming – Update Firmware, Download Fonts and Logos Microsoft Windows XP / VISTA / 7 / 8 / CE / Linux / Android compatible. Flow control : Software (XON/XOFF) ※ Hardware flow control not supported in printer http://www.woosim.com WSP-DT380 Rev. 4.0 Using the Printer ● Be careful not to drop or bump the printer on a hard surface. ● Do not install the printer in direct sunlight or such areas. Suitable environment for the use of the printer is as follows: ◆ Operating temperature :-10°C to 50°C ◆ Relative humidity : 30% to 85% ● Do not install the printer near devices that generate strong electromagnetic fields such as a copy machine. ● Do not open the platen cover during printing . ● Do not remove or reinstall the communication cable during printing or transmission. ● Do not touch the connectors of the communication during printing. ● Switch the POWER OFF when not in use. ● Do not use alcohol or other solvent. ● When the battery pack is used at low temperature, the length of time the printer can be used may be shortened. Thermal Paper Handling ● Store the thermal paper in a cool, dry and dark place. ● Do not rub the paper with hard object. ● Do not leave the paper with hard object. ● Do not allow plastic film, erasers, or adhesive tape to touch the paper for long periods. ● Do not stack the thermal paper with diazo copies immediately after copying or wet-type copies. ● Do not use chemical glue. ● Always use the clean thermal paper. http://www.woosim.com WSP-DT380 Rev. 4.0 FCC ID : QDDWSP-DT380 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ㆍReorient or relocate the receiving antenna. ㆍIncrease the separation between the equipment and receiver. ㆍConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. ㆍConsult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void the user's authority to operated the equipment under FCC rules. This Device has been evaluated to comply with RF exposure requirement for general use limit in portable condition. It is safe to be used in sold condition. http://www.woosim.com WSP-DT380 Rev. 4.0 CONTENTS 1. Outline. .........................................................................................................................................7 1.1. Model classifications. ...........................................................................................................7 1.2. Product Part Number System .............................................................................................7 1.3. Specifications. ........................................................................................................................8 2. Setting up the printer. ............................................................................................................10 2.1. Printer & Accessories .........................................................................................................10 2.2. Printer Features ................................................................................................................... 11 2.3. Replacing paper roll. ...........................................................................................................13 2.4. Power supply ........................................................................................................................14 2.4.1. Specified power supply. ..............................................................................................14 2.5. Setting the DIP switches ....................................................................................................14 3. Interface......................................................................................................................................16 3.1. USB ........................................................................................................................................17 3.2. Bluetooth ..............................................................................................................................18 3.3. Card Reading .......................................................................................................................19 4. Using the printer. .....................................................................................................................20 4.1. Control panel. ......................................................................................................................20 4.2. The self test. .........................................................................................................................21 5. Consumable Parts ....................................................................................................................22 5.1. Recommended paper .........................................................................................................22 5.2. Printing position. .................................................................................................................22 http://www.woosim.com WSP-DT380 Rev. 4.0 1. Outline. 1.1. Model classifications. WSP–DT380 ) ( Model Interface A0 : UART Power None : DC 24V/2.7A 1.2. Product Par t Number System Model name Interface Spec. S40 Wired SC30 W25 Example) 1. Porti-S40 2. Porti-SC30 Wireless RS-232C Bluetooth TTL IrDA USB None RS-485 Parallel None Serial/Bluetooth Part No. ⇒ S40/A1 Bluetooth Only Part No. ⇒ SC30/Z1 http://www.woosim.com WSP-DT380 Rev. 4.0 1.3. Specifications. Item Specifications Printing method Thermal dot line printing Characters per line 64cpl (MAX) Character size Eng. : 9*24dots, 12*24dots Kor. : 16*24dots, [24*24dots] Simplified/Traditional Chinese, Arabic, Cyrillic, Russian, Optional Characters Turkish, Greek, Japanese, Persian, Latin9 and Others upon request. Resolution W 8dots/mm X H 8 dots/mm Paper feed pitch 0.0625mm Print width 3-inch (72mm, 576dots) Printing speed 170mm / sec (MAX) Dimensions 126 * 165.5 * 108.2 mm Weight 801g Interface USB, Bluetooth Ver2.1 + EDR Paper supplied Thermal roll paper (80mm wide, 80ø) 1-dimension : Code128, EAN 128, Code39, I2/5, Code93 Barcode supplied UPC, EAN, KAN,JAN, CODABAR 2-dimension : PDF417, QR Code, DATA Matrix Driver Microsoft Widows XP / VISTA / 7 / 8 / Windows CE, Linux, Android OS driver compatible H/W Spec. MCU : 32bit RISC, Receive buffer size 1M bytes MSR ISO 7810 / 7811 / 7812 Paper cutting method Slide cutting Type of paper cutting Full cut and Partial cut (1.5±0.5mm tab left at the center) AC adapter FLASH : 4 Mbytes, RAM : 8 Mbytes Triple tracks(1&2&3) Reading Rated Voltage : AC 100-240V, 50-60Hz Capable of Supplying : +24VDC at 2.7A http://www.woosim.com WSP-DT380 Rev. 4.0 Item Environment conditions Specifications -10°C ~ 50°C (operating) Temperature -20°C ~ 60°C (storage) Humidity 30% - 85% (operating) Activation pulse Life span (at 25℃ and rated energy) resistance Abrasion resistance Paper cutting resistance 100 million pulses or more 100km or more (excluding damage caused by dust and foreign materials) 700,000 cuts or more http://www.woosim.com WSP-DT380 Rev. 4.0 2. Setting up the printer. 2.1. Printer & Accessories Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. WSP-DT380 AC Adapter Thermal roll paper http://www.woosim.com 10 WSP-DT380 Rev. 4.0 2.2. Printer Features ▶ Part Name http://www.woosim.com 11 WSP-DT380 Rev. 4.0 ▶ Dimensions http://www.woosim.com 12 WSP-DT380 Rev. 4.0 2.3. Replacing paper roll. Note : Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer can not detect the paper end correctly. 1. Make sure that the printer is not receiving data; otherwise, data may be lost. 2. Open the paper cover as the “One-Touch” way by pressing the button in the arrow direction like the picture. 3. Insert a new paper roll as shown. 4. Tear the excess paper off using the edge of paper door as a tear bar. http://www.woosim.com 13 WSP-DT380 Rev. 4.0 2.4. Power supply 2.4.1. Specified power supply. The following specification is requested for Power supply. Input : Rated Voltage : AC 100-240V, 50-60Hz Capable of Supplying : +24VDC at 2.7A Avoid using power supply which its power capacity of power current is extremely high. 2.5. Setting the DIP switches The DIP switches are located on the bottom of the printer. The DIP switches are used to set the printer to perform various functions. Follow these steps when changing DIP switches setting : 1. Turn the printer power switch off. 2. Turn the printer over and remove the DIP switch cover. 3. Move the DIP switches using tweezers or another narrow-ended tool. 4. The new setting takes effect when you turn on the printer. http://www.woosim.com 14 WSP-DT380 Rev. 4.0 No DIP SWITCH No. Off Off Density High Off On Density Medium On Off Density High On On Density Low Off Off Off 1000000 Baud Rate On Off Off 500000 Baud Rate Off On Off 230400 Baud Rate On On Off 115200 Baud Rate Off Off On 57600 Baud Rate On Off On 38400 Baud Rate Off On On 19200 Baud Rate On On On 9600 Baud Rate Off 8 Data Bit On 7 Data Bit Off Off Odd Parity, 1 Stop Bit Off On Even Parity, 1Stop Bit On Off Odd Parity, 1 Stop Bit On On No Parity, 1 Stop BitNOTE : Always change DIP switch settings when the printer is turned off. Changes made with the power on have no effect until you turn the printer off and then on again. http://www.woosim.com 15 WSP-DT380 Rev. 4.0 3. Interface WARNING A wrong connection of power supply connector could be damage the printer. In the printer power off state Please connect the power supply. http://www.woosim.com 16 WSP-DT380 Rev. 4.0 3.1. USB USB Pin No. Signal Name Function USB_VCC +5V DM DATA - DP DATA + GND Ground < USB (B TYPE)> Drawer Kick-out Pin No. Signal Name Direction Frame GND Drawer Kick-out driver signal 1 Output Drawer open/close signal Input +12V Drawer kick-out drive signal 2 Output Signal GND < MODULAR JACK - DK623PCB6P> http://www.woosim.com 17 WSP-DT380 Rev. 4.0 3.2. Bluetooth Category Specification Bluetooth Spec. Bluetooth Ver2.1 +EDR / Class2 (10m) Frequency Range 2.4GHz ISM BAND Data Transmission Rate 57600bps Fixed. Data bit 8 Data bit Fixed. Parity bit No parity Fixed. Stop bit 1 Stop bit Fixed. http://www.woosim.com 18 WSP-DT380 Rev. 4.0 3.3. Card Reading Please take notice that Magnetic Stripe Card should be swapped in direction of arrow. Card can be read in one direction. http://www.woosim.com 19 WSP-DT380 Rev. 4.0 4. Using the printer. 4.1. Control panel. BUTTON - FEED : When the printer is on, paper can be feed manually by pressing and holding the FEED button for more than one second. PANEL LAMP -POWER (Green) : Printer is ON and ready to receive data. -ERROR (Red) : Indicates a fault condition or a printer error. (i.e : no paper, paper cover opened. etc.) -PAPER (Red) : Indicates the shift time of the paper. http://www.woosim.com 20 WSP-DT380 Rev. 4.0 4.2. The self test. The self test procedure will check most of the printer functions. For self test, turn on the power while holding down the FEED Button. The Self-Test checks the following : 1) Make sure paper roll has been installed properly. 2) The Self-Test prints the current printer status, which provides the control ROM version and the communication method setting. 3) After printing the current printer status, Self-Test will print a pattern using the built-in character set. 4) The Self-Test automatically ends. The printer is ready to receive data as soon as it completed the self test. http://www.woosim.com 21 WSP-DT380 Rev. 4.0 5. Consumable Par ts 5.1. Recommended paper Type : Thermal Paper Paper width : 80mm Paper thickness : 60±5㎛ Outer diameter : Ø‘0mm or less Recording side : Outside of roll Cautions 1. Do not paste the paper to the core. And the roll paper which has near end mark printing on its near end is recommended. 2. Chemicals or oil may change the color of paper, or printed characters may fade. 3. Change of paper color starts from approx. 70℃. Pay attention to heat, humidity and sun light. 4. Color of paper may be changed by being scratched by nail or hard metal, etc. 5.2. Printing position. http://www.woosim.com 22
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : Jeong jae yun Create Date : 2014:01:07 21:03:16+09:00 Modify Date : 2014:01:08 18:21:54+09:00 Language : ko-KR Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Jeong jae yun Creator Tool : Microsoft® Word 2010 Metadata Date : 2014:01:08 18:21:54+09:00 Producer : Microsoft® Word 2010 Document ID : uuid:938feacb-693f-4a93-b6f5-589603865489 Instance ID : uuid:0adcf808-f1e4-423c-91ce-b0a97e524968 Page Count : 22EXIF Metadata provided by EXIF.tools