WOW Technologies SWSERIES Shockwafe Sound Bar with Wireless Subwoofer User Manual 7 2 ifu 0814
WOW Technologies (Singapore) Pte Ltd Shockwafe Sound Bar with Wireless Subwoofer 7 2 ifu 0814
15_PRO 7.1 UserMan r1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3570098 |
| Application ID | 9NcjU9082bjOIS+mdMpoDA== |
| Document Description | 15_PRO 7.1 UserMan r1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 415.51kB (5193843 bits) |
| Date Submitted | 2017-09-20 00:00:00 |
| Date Available | 2017-09-20 00:00:00 |
| Creation Date | 2017-09-08 15:24:07 |
| Producing Software | Acrobat Distiller 11.0 (Windows) |
| Document Lastmod | 2017-09-08 15:25:31 |
| Document Title | 7.2 ifu 0814-- |
| Document Creator | Adobe Illustrator CS6 (Windows) |
| Document Author: | User |
ELITE 106 106 TABLE OF CONTENTS Package Contents ...............................................................................................................4 Control and Connections .....................................................................................................5 Setting up the SHOCKWAFE Elite System ........................................................................8 Setting your TV................................................................................................................. 13 Connecting your TV ......................................................................................................... 14 Advance Setup: Non-HDMI ............................................................................................. 16 Advance Setup: HDMI ...................................................................................................... 17 One Device Setup ............................................................................................... 18 Two Device Setup................................................................................................ 19 Three Device Setup............................................................................................. 20 Four Device Setup............................................................................................... 21 Audio Settings for Streaming Devices .............................................................................. 22 Using the Remote............................................................................................................. 23 Accessing SOURCES on your Remote............................................................................ 24 Accessing SETUP on your Remote.................................................................................. 25 Accessing MENU on your Remote ................................................................................... 26 Accessing INFO on your Remote ..................................................................................... 27 Accessing EQs on your Remote ...................................................................................... 28 Saving Audio Setting to system Memory.......................................................................... 29 Accessing ROOM SIZE on your Remote ......................................................................... 30 Using Bluetooth Mode ...................................................................................................... 31 Re-linking the Subwoofer with the Soundbar ................................................................... 32 Wall Mounting the Soundbar ............................................................................................ 33 Wall Mounting the Satellite Speakers............................................................................... 35 Firmware Upgrade............................................................................................................ 36 Help & Troubleshooting .................................................................................................... 37 Warranty Information & Customer Support ...................................................................... 38 Glossary ........................................................................................................................... 39 Specification ..................................................................................................................... 41 Legal & Compliance ......................................................................................................... 42 BLUETOOTH / USB MODE ONLY HDMI ARC HDMI 2 HDMI 3 HDMI 4 OPTICAL COAXIAL AUX USB SYSTEM MEMORY NIGHT ENTER TAINMENT MOVIE MUSIC CLEAR VOICE STEREO PURE DIRECT SETUP DSP OFF MENU ENTER RETURN INFO DIALOG CONTROL ROOM SIZE SIZE BASS LED DIMMER VOL LED CENTR+ CENTR S L/R S L/R SHOCKWAFE ELITE Sound bar 2 x Subwoofer Power cables 1 x Soundbar Power cables (Length: 5 ft.) 3.5mm Audio Cable (Length: 4 ft.) 2 x Mounting Screws (Sound bar) TREB TREB SB L/R + SB L/R LIP SYNC + LIP SYNC AUTO VOL SUR ON OFF Dual Wireless Subwoofer 2 x Satellite Speaker Audio Cables (Length 16.4 ft. each) 12 x Wall Screws 4 x Mounting Screws (Satellite Speakers) (Length: 5 ft.) 12 x Screws Brackets 6 x Sound Bar and Satellite Wall Mount Brackets Digital Optical cable (Length: 5 ft.) Power Adapter (Length: 5 feet) Mounting Guide USB IN (WMA & MP3 music playback and Firmware update) OPTICAL Digital Optical Audio in AUX Analog Audio In (Stereo 3.5mm) COAXIAL Digital Coaxial Audio in HDMI IN [2] (compatible with HDCP 2.2, 4K HDR pass thru) HDMI IN [3] (compatible with HDCP 2.2, 4K HDR pass thru) HDMI OUT [1] (ARC TO TV) HDMI IN [4] (compatible with HDCP 2.2, 4K HDR pass thru) Press to turn Sound Bar On or Standby. Back of LEFT Subwoofer LED indicator Power Switch Pairing Button USB IN (For Firmware update only) Power Port LEFT Back Satellite Speaker Port (Connects to Satellite Speaker) Satellite Speaker Port (Connects to Subwoofer) Back of RIGHT Subwoofer LED indicator Power Switch Pairing Button Power Port USB IN (For Firmware update only) RIGHT Back Satellite Speaker Port (Connects to Satellite Speaker) Satellite Speaker Port (Connects to Subwoofer) SETTING UP THE SHOCKWAFE ELITE SYSTEM Back of Sound Bar Plug the Power adapter to the sound bar and into an electrical outlet. Connect the LEFT Back satellite speakers to the LEFT subwoofer using the included satellite speaker audio cables. Connect the RIGHT Back satellite speakers to the RIGHT subwoofer using the included satellite speaker audio cables. LEFT 10 RIGHT LEFT & RIGHT Subwoofer 11 Top Top Insert the batteries included in the accessories box and gently push the battery cover back into place. Remove the battery cover by pulling it out from the remote. Turn your Soundbar on by pressing the Power button. Use respective input keys to select an audio input source to be played. Power BLUETOOTH / USB MODE ONLY HDMI ARC HDMI 2 HDMI 3 HDMI 4 OPTICAL COAXIAL AUX USB SYSTEM MEMORY MUSIC 12 NIGHT MOVIE ENTER TAINMENT CLEAR VOICE STEREO PURE DIRECT DSP OFF DSP SETUP MENU Source 13 14 Connect one end of the HDMI cable to the HDMI (ARC) port at the back of your TV. Connect the other end to the TV HDMI [1] (ARC) port on your Nakamichi sound bar. 15 RE 16 HDMI cables transmit both audio and video. To view video from these devices, turn the Soundbar on, then set the Soundbar input to HDMI IN [2], HDMI IN [3] or HDMI IN [4]. Set your TV input to the HDMI ARC port to which the Soundbar is connected. HDMI IN [2] (compatible with HDCP 2.2, 4K HDR pass thru) HDMI IN [3] (compatible with HDCP 2.2, 4K HDR pass thru) HDMI IN [4] (compatible with HDCP 2.2, 4K HDR pass thru) HDMI OUT [1] (ARC TO TV) BACK OF TV GAME CONSOLE 17 HDMI OUT [1] (ARC TO TV) 18 If the device is not equipped with a HDMI port, use an Optical or Coaxial output. HDMI OUT [1] (ARC TO TV) If the device is not equipped with a HDMI port, use an Optical or Coaxial output. 19 HDMI OUT [1] (ARC TO TV) 20 If the device is not equipped with a HDMI port, use an Optical or Coaxial output. HDMI OUT [1] (ARC TO TV) AUDIO AUDIO If the device is not equipped with a HDMI port, use an Optical or Coaxial output. 21 22 1 Power BLUETOOTH / USB MODE ONLY HDMI ARC HDMI 2 HDMI 3 HDMI 4 OPTICAL COAXIAL AUX USB SYSTEM MEMORY NIGHT MUSIC MOVIE ENTER TAINMENT CLEAR VOICE STEREO PURE DIRECT DSP OFF DSP SETUP 10 11 12 ENTER RETURN INFO 14 DIALOG CONTROL 15 SIZE ROOM SIZE VOL BASS 16 11 LED DIMMER 20 22 23 10 LED 18 19 13 17 MENU CENTR+ TREB + LIP SYNC + CENTR TREB LIP SYNC S L/R + SB L/R + SUR ON S L/R SB L/R SUR OFF 21 24 12 Press to turn on/off the Soundbar. Mute Press to mute/unmute the Soundbar. Play/ Pause Press to play/pause track in Bluetooth or USB mode. Stop Press to stop track in USB mode. Previous Press to return to the previous track in Bluetooth or USB mode. Next Press to skip to the next track in Bluetooth or USB mode. Input Source Press to select an audio input source. System Memory Press to save volume and other audio settings. EQs Press to cycle through different EQs. SETUP Press to display the setup settings: DTS:X & DOLDY DRC, ECO mode and Factory reset. To use Setup function, please switch to HDMI ARC input. MENU Press to display menu settings: Firmware upgrade and Wireless subwoofer pairing. To use Menu function, please switch to USB input. DTS:X Dialog Control. Press to adjust the DTS:X audio contentâs Dialog (Human voices) level. Left, Right Arrow and Enter. Press to change the setting in Setup and Menu function. 13 Return 14 15 16 17 18 19 20 21 22 23 24 Press to return to the previous selection in Setup and Menu function. Info Press to display the information display on the front LED Display. Bass +/Press to adjust the dual subwoofersâ level. Vol +/Press to adjust the volume of the Soundbar. Room Size Press to select a pre-define optimized room size (Small, Medium and Large) loudness. LED Dimmer Press to adjust the front LED Displayâs brightness. Center +/Press to adjust the center level. Treble +/Press to adjust the high tones (treble) level. SURR L & R +/Press to adjust the surround left & right speakersâ volume. SURR Back L & R +/Press to adjust the surround back left & right speakersâ volume. SURR On/Off Press to enable/disable surround sound. When enabled (On), all inputs will produce 7.2 surround sound. When disable (off), the satellite speakers will be disabled. Lip Sync +/Press to adjust the deviations in timing between audio and video playback. Works for input: HDMI 1 to 4, Optical and Coaxial. 23 Press respective buttons to select an audio input source. Each input source (function) will be displayed on the Soundbarâs front LED display. Input source (function): BLUETOOTH / USB MODE ONLY HDMI ARC HDMI 2 HDMI 3 HDMI 4 OPTICAL COAXIAL AUX USB SYSTEM MEMORY MUSIC MOVIE ENTER TAINMENT CLEAR VOICE STEREO PURE DIRECT DSP OFF DSP SETUP MENU ENTER 24 NIGHT ACCESSING SETUP ON YOUR REMOTE To use SETUP function, please switch to HDMI ARC input. Setting the SETUP selection: 1. Press the SETUP ( ) button. The selection changes as follows each time the SETUP ( ) button is pressed BLUETOOTH / USB MODE ONLY HDMI ARC HDMI 2 HDMI 3 HDMI 4 OPTICAL COAXIAL AUX USB âDTS:X & DOLBY Dynamic range compression (DRC)â, âPower Saving (Eco)â & âFactory Resetâ 2. Press the SETUP ( ) button to access to different setup selection: DRC > ECO > RESET, and press ENTER. Repeat these steps to display the desired setup. SET-UP VALUES Press ENTER SYSTEM MEMORY MUSIC NIGHT ENTER TAINMENT MOVIE CLEAR VOICE STEREO PURE DIRECT DSP OFF DSP SETUP Change the setting value of each selection Exit the SETUP Press the RETURN button to return to the previous selection MENU ENTER RETURN INFO 3. Press the arrow button to change the setting value of each setup. Press ENTER to confirm. 4. Press the SETUP ( the setup menu. ) button again to exit DIALOG CONTROL BASS SIZE ROOM SIZE VOL LED LED DIMMER CENTR+ TREB + LIP SYNC + CENTR TREB LIP SYNC S L/R + SB L/R + SUR ON S L/R SB L/R SUR OFF SET-UP Selection List: SET-UP SELECTION (Press ENTER) DTS:X & DOLBY Dynamic Range Compression (DRC) DRC (Default OFF) POWER SAVING (30 mins power off) ECO (Default ECO ON) Factory Reset RESET VALUES 50% 100% OFF OFF ON YES ON After 5 seconds Completed, LED display will go back to current input source. Completed, LED display will go back to current input source. Completed, System Restarts 25 ACCESSING MENU ON YOUR REMOTE To use MENU function, please switch to USB input. Setting the MENU selection:: 1. Press the MENU ( BLUETOOTH / USB MODE ONLY HDMI ARC HDMI 2 HDMI 3 HDMI 4 OPTICAL COAXIAL AUX USB ) button to select 2. Soundbar performing task. SYSTEM MEMORY CLEAR VOICE STEREO PURE DIRECT DSP OFF DSP SETUP Firmware Upgrade (USB) or Wireless Subwoofer Pairing and press ENTER. ENTER TAINMENT MOVIE MUSIC MENU ENTER RETURN 3. Press the MENU ( ) button to exit the MENU selection INFO DIALOG CONTROL BASS Press the RETURN( ) button to return to the previous selection NIGHT SIZE ROOM SIZE VOL SET-UP Selection List: MENU SELECTION FUNCTIONS LED UPGRADING LED DIMMER CENTR+ TREB + LIP SYNC + CENTR TREB LIP SYNC S L/R + SB L/R + SUR ON S L/R SB L/R SUR OFF FIRMWARE UPGRADE (USB) FW UPGRADE DONE FAIL PAIRING WIRELESS SUBWOOFER PAIRING SUB PAIR DONE FAIL 26 ACCESSING INFO ON YOUR REMOTE Switching information displayed on the front panel LED display. Information regarding the Firmware version, Decoder format, EQs mode, Volume, Bass, Center, Treble, Surround and Surround back is displayed. BLUETOOTH / USB MODE ONLY HDMI ARC HDMI 2 HDMI 3 HDMI 4 OPTICAL COAXIAL AUX USB 1. Press the INFO button. SYSTEM MEMORY MUSIC Display changes as follows each time the INFO button is pressed. The information varies according to the input source. NIGHT ENTER TAINMENT MOVIE CLEAR VOICE STEREO PURE DIRECT DSP OFF DSP SETUP MENU Firmware Version Decoder format: Audio format playing, e.g. DTS, DOLBY or PCM EQ mode: e.g. Movie, Music, Stereo... ENTER RETURN INFO DIALOG CONTROL BASS SIZE ROOM SIZE VOL Volume Bass levels LED Center channel levels LED DIMMER CENTR+ TREB + LIP SYNC + CENTR TREB LIP SYNC S L/R + SB L/R + SUR ON S L/R SB L/R SUR OFF Treble levels Surround Left & Right channel levels Surround Back Left & Right channel levels 27 + ACCESSING EQS ON YOUR REMOTE Press the EQS buttons on your remote to select the desired EQs settings for your preferences. Each EQs settings will be displayed on the Soundbarâs LED Display. MOVIE EQ is the default EQ setting. Every change in EQ, the system will remember the last setting. BASS LOW Reduces the Bass volume to level 01 for night time listening. ON Enables the Subwoofers. MUSIC Reproduces the acoustic environment and lets you feel as if your seated in front of the singerâs stage. MOVIE Reproduces the thrilling environment of action films and lets you feel the dynamic and excitement of action scenes. SPORTS Reproduces the energetic environment of live sports broadcasting, converging a commentatorâs voice on the center and broadening the overall atmosphere of the stadium. NIGHT MUSIC MOVIE ENTERTAINMENT CLEAR VOICE STEREO PURE DIRECT DSP OFF 28 NEWS Reproduces excitement of live talk shows, it enhances the ambience of gaiety while keeping the conversation at a comfortable volume GAME Reproduces sound field effects for adventure games to represent the depth and spatial feeling of the field. CLEAR VOICE Human voices, such as lines in movies and TV shows are played back very clearly. STEREO 2-channel stereo playback using the right front and left front channels is enabled. When multi-channel audio signals are inputted, they are down-mixed to 2 channels. LED Display of EQS Settings: BASS 01 ON MUSIC MOVIE SPORTS NEWS GAME CLEAR VOICE STEREO PURE DIRECT PURE DIRECT Disable DTS Neural:X upmixing. Direct decoder format playback in normal 2.0/ 5.1 /7.1 channel audio. NATIVE NATIVE Disable DTS Neural:X upmixing. Direct decoder format to native 2.0/ 5.1/ 7.1 channel audio. DSP OFF DSP OFF Audio playback without using any pre-defined Nakamichi EQ settings. SAVING AUDIO SETTING TO SYSTEM MEMORY Two sets of audio settings can be saved on the Soundbarâs memory, enabling quick loading of settings optimized for user preference. LED Display on Sound bar: BLUETOOTH / USB MODE ONLY Function HDMI ARC HDMI 2 HDMI 3 HDMI 4 OPTICAL COAXIAL AUX USB SYSTEM MEMORY MUSIC NIGHT ENTER TAINMENT MOVIE CLEAR VOICE STEREO PURE DIRECT DSP OFF DSP SETUP MENU INFO DIALOG CONTROL BASS 5 LED DIGITS on Sound Bar Customized Memory 1 Long press to SAVE1 Once saved, show M1SET SYSTEM MEMORY Customized Memory 2 Long press to SAVE2 Once saved, show M2SET Saving settings to system memory: 1. Hold down the SYSTEM MEMORY 1 or 2 ENTER RETURN DSP & VOL Button SIZE ROOM SIZE VOL button until âSAVE1â or âSAVE2â, corresponding to the button pressed, is displayed on LED. 2. When the SYSTEM MEMORY 1 or 2 settings are saved, âM1SETâ or âM2SETâ is displayed. LED LED DIMMER CENTR+ TREB + LIP SYNC + CENTR TREB LIP SYNC S L/R + SB L/R + SUR ON S L/R SB L/R SUR OFF If system settings are already stored in the selected memory 1 or 2, the system overwrites the old settings. Loading settings 1.Press the SYSTEM MEMORY 1 or 2 button once and the corresponding settings will be loaded. If the SYSTEM MEMORY 1 button is pressed, âM1â will be displayed. The following audio settings can be saved to system memory: a) EQ mode b) Volume c) Bass d) Treble e) Center f) Surround L&R g) Surround Back L&R 29 ACCESSING ROOM SIZE ON YOUR REMOTE Three presets of volume settings for Small, Medium and Large rooms is saved to this unitâs memory, enabling quick loading of settings optimized for different room sizes Room Size Small Medium (Average) Large Square feet 199 326 484 14 x 14 18 x 18 22 x 22 Room dimension: Length x Width (feet) LARGE ROOM MEDIUM ROOM SMALL ROOM 22ft x 22ft (484ft. sq.) 18ft x 18ft (326ft. sq.) 14ft x 14ft (199ft. sq.) (6.5ft) (9.8ft) (12.1ft) Left (6.5ft) (6.5ft) Right (5ft) Left (9.8ft) (8.2ft) (6.5ft) (6.5ft) (9.8ft) Left Right (8.2ft) 30 (8.2ft) (8.2ft) Right (5ft) USING BLUETOOTH MODE BLUETOOTH PAIRING Your Sound Bar supports music streaming from smartphones, To pair the Soundbar with a Bluetooth device: tablets, and computers with Bluetooth capability. Device compatibility 1. Press the Bluetooth ( ) button on the remote control. The will vary, see your deviceâs documentation for more information. LED display on the soundbar will display âBTâ blinking. The Soundbar Bluetooth pairing will be discoverable for 15 Once you have paired your source device to the Sound Bar, as long minutes. as you stay within range of the Sound Bar, your device should remain Note: Set your Bluetooth device into pairing mode prior to paired. pairing with the Soundbar. If the input is changed, the Bluetooth device will disconnect. If the 2. You can now search for the Soundbar (SHOCKWAFE) source is changed back to Bluethoth, any paired Bluetooth device using your Bluetooth device. For more information, refer will reconnect automatically. Note: Reconnecting time may differ to the user documentation that comes with the device. by different devices. Maximizing Signal A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, so streamed music may lose some integrity when compared to a wired connection. Try the following if your sound quality is less than optimal: If you hear any break-up or disconnect while streaming music from your device, move the source device closer to the Sound Bar. Be sure that there are no solid obstructions in the line-of-sight between the Sound Bar and the source device. Other wireless devices can affect Bluetooth range, including wireless security cameras, wireless video baby monitors, cordless phones, and microwave ovens. Turning off or moving these devices may improve Bluetooth range. 3. Press audio from your Bluetooth device. Volume can be controlled on your source device and Soundbar remote control. Note: If the soundbar detects the Bluetooth device previously connected, the Soundbar automatically connects to the Bluetooth device after Step 1 To disconnect the Soundbar with a paired Bluetooth device: 1. Hold down the Bluetooth ( ) button on the remote control. The LED display on the soundbar will display âBTâ blinking. The Soundbar is ready to pair with a new device. 31 RE-LINKING THE SUBWOOFER WITH THE SOUNDBAR The subwoofer has already been paired with the Sound Bar by NAKAMICHI. However, they may need to be re-linked if there is no sound coming from the subwoofer. Turn off your TV speakers when programming your sound bar. 2 Power and switch ON the soundbar. to USB mode, press and hold the DEMO button 3 Switch for 5 seconds. OR Using the remote control, (a) Switch RIGHT Ensure that the Soundbar is switched OFF. On the two Subwoofers, first confirm that the power switches are in the ON position at the back of the LEFT Subwoofer and then the RIGHT Subwoofer. Press the PAIRING button on the LEFT and then the RIGHT Subwoofer. The BLUE LED on the back of the two subwoofers will begin the blink. 32 to USB mode, (b) Toggle the MENU button to âSUB PAIRâ and (c) Press ENTER. The LED display on the Soundbar will display âSUB PAIRâ then âPAIR-â. Once the linking is completed, the BLUE LED on the back of the two subwoofers will light up continuously. The two subwoofers are now linked with the Soundbar. Insert the two mounting screws into the wall-mount screw holes, and then tighten them. 33 34 WALL - MOUNTING THE SATELLITE SPEAKERS To wall-mount the satellite speakers: 1. Attach the mounting screws to the back of the satellite speaker. 2. Align and mount the satellite speaker with the wall mount barcket. Mounting Screws 35 FIRMWARE UPGRADE New firmware that provides additional features or product improvements will be release as needed. Firmware updates can be downloaded at www.nakamichi-usa.com/fw Do not perform this procedure unless firmware update is necessary. Make sure you read the information supplied with the updates before updating the firmware. Checking the firmware version: On the remote control toggle the INFO button until the LED display âFW XXâ. The firmware version will be displayed. SOUNDBAR FIRMWARE UPGRADE 1. Press the USB button on the remote control to USB mode. 2. Insert the USB stick with the unzipped firmware into the Soundbarâs USB port. 3. Press and hold the ENTER button. 4. Firmware updating process will be displayed on the LED screen. 5. Once the firmware is completed, the Soundbar will restart automatically. SUBWOOFER FIRMWARE UPGRADE 1. Insert the USB stick with the unzipped firmware into the LEFT Subwooferâs USB port. 2. Firmware upgrading will start automatically. The RED LED light will start blinking during the firmware updating process. 3. Once firmware update is completed, the RED LED light will turn off. 4. Repeat step (1) for the RIGHT subwoofer. *When you perform firmware upgrade, ensure that BOTH the LEFT & RIGHT subwooferâs firmware are upgraded. 36 UPGRADE PROCESS SOUNDBAR FIRMWARE UPGRADE SUBWOOFER FIRMWARE UPGRADE Firmware upgrade process may take up to 5 to 10 minutes. Update progress is displayed on the front panel display when the firmware is upgrading. During each upgrading stage, there will be a numeric percentage to show its progress. Firmware upgrade process may take up to 5 to 10 minutes. After inserting the USB stick to the subwooferâs USB port, the subwoofer is accessing the firmware and may takes up to 2 minutes before the RED LED light will starting blinking. UPGRADING UPG-RED MCU DSP HDMI Wireless Bluetooth DONE MCU00 DSP00 HDM00 tx00 BT00 BLUE USB PAIRING 5 to 10 minutes Once the firmware is completed, the RED LED light will turn off, and the BLUE LED next to the Pairing button will light up. DONE Once the firmware is completed, the Soundbar will restart automatically to factory default setting. 37 HELP & TROUBLESHOOTING There is no power. Press the POWER button on the remote control or on the top of your Sound Bar. Ensure the power cord is securely connected. Plug a different device into the electrical outlet to verify that the outlet is working correctly. There is no sound. Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar. Press MUTE on the remote to ensure the Sound Bar is not muted. Press SOURCE on the remote or on the top of your Sound Bar to select a different input source. When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio. Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Consult your TVâs user manual for more detailed information. If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted. I hear sound cutting out. See Page 22 for optimal source device settings. Go to www. nakamichi-usa.com/audio-setting for the most updated list. Contact: support@nakamichi-usa.com (we guarantee a response within 24 hours.) The remote isnât working. Replace the remote batteries with new ones. Point the remote directly at the center of the Sound Bar when pressing a button. If using a Bluetooth connection, some of the buttons on the remote may not be supported the streaming application.(e.g., Pandora doesnât support the Back button.) Resetting the SHOCKWAFE. On the remote control, select HDMI ARC mode > Toggle SETUP button to âRESETâ > Press ENTER > Select âYESâ > Press ENTER. 38 ONE YEAR LIMITED WARRANTY Nakamichi LLC (âNakamichiâ) warrants this product against defects in material or workmanship for the time periods and as set forth below. Pursuant to this Limited Warranty, Nakamichi will, at its option, (i) repair the product using new or refurbished parts or (ii) replace the product with a new or refurbished product. For purposes of this Limited Warranty, ârefurbishedâ means a product or part that has been returned to its original specifications. In the event of a defect, these are your exclusive remedies. Labor: For a period of one (1) year from the original date of purchase of the product (âLabor Warrantyâ), Nakamichi will, at its option, repair or replace with new or refurbished product, product determined to be defective. If Nakamichi elects to replace the product after this Labor Warranty has expired but while the Parts Warranty below is still in effect, it will do so for the applicable labor charge. Parts: For a period of one (1) year from the original date of purchase of product (âParts Warrantyâ), Nakamichi will supply new or refurbished replacement parts in exchange for parts determined to be defective. This Limited Warranty covers only the hardware components packaged with the Product. It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the Product; any such software is provided âAS ISâ unless expressly provided for in any enclosed software Limited Warranty. Please refer to the End User License Agreements included with the Product for your rights and obligations with respect to the software. CUSTOMER SUPPORT Thank you for your purchase of this Product. If you have any questions or comment, please visit our website at www.nakamichi-usa.com/faq or email them to support@nakamichi-usa.com 39 GLOSSARY This section explains the technical terms used in this user manual. What is DTS:X Object Based Audio? With traditional audio technologies, which channels (speakers) should output what types of sounds when creating audio sources was pre-defined. This is called "channel-based audio". In contrast, new audio systems such as DTS:X use a new technology called object-based audio. This technology processes each sound (e.g., the sound of a car or an actor's voice) contained in an audio source as an "object" and memorizes each object's sound changes and positional changes in a sound field to control these changes during playback. The greatest advantage of applying object-based audio to a home surround sound system is the power to control the audio output method based on device features and the number of speakers used for playback. AUDIO INFORMATION Dolby Digital Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports 5.1-channel audio. This technology is used for audio on most DVD discs. DTS: X Dialog Control DTS: X Dialog Control allows you to boost the dialog. This can be useful in noisy environments to help make the dialog more intelligible. People with impaired hearing may also benefit. Note that the content creator may disable the use of this feature in the mix, so that DTS:X Dialog Control may not always be available. DTS Digital Surround DTS Digital Surround is a compressed digital audio format developed by DTS, Inc. that supports 5.1-channel audio. This technology is used for audio on most DVD discs. DTS-HD High Resolution Audio DTS-HD High Resolution Audio is a compressed digital audio format developed by DTS, Inc. that supports 7.1-channel and 96 kHz/24-bit audio. DTS-HD High Resolution Audio remains fully compatible with the existing multichannel audio systems that support DTS Digital Surround. This technology is used for audio on BD (Blu-ray discs). DTS-HD Master Audio DTS-HD Master Audio is an advanced lossless audio format developed to offer a high-definition home theater experience with the quality of the studio master by DTS, Inc. DTS-HD Master Audio can carry up to eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This technology is used for audio on BD (Blu-ray discs). 40 DTS:X DTS:X is the next generation object-based, multi-dimensional audio technology from DTS. Unbound from channels, DTS:X conveys the fluid movement of sound to create an incredibly rich, realistic and immersive soundscape - in front of, behind, beside and above the audience - more accurately than ever before. DTS:X offers the ability to automatically adapt the audio to the speaker layout that best fits the space, from a television's built-in speakers to a home surround theater system to a dozen or more speakers in a commercial cinema. Immerse yourself at www.dts.com/dtsx Neural:X Neural:X is the latest downmixing/upmixing and spatial remapping technology from DTS. It is built in to DTS:X to provide upmix of Neural:X-encoded and non-encoded (PCM) data. In DTS:X for Soundbars, Neural:X can produce up to 11.x channels. PCM (Pulse Code Modulation) PCM is a signal format under which an analog audio signal is digitized, recorded, and transmitted. This technology is the basis of all other audio format. This technology is used as a lossless audio format called Linear PCM for audio on a variety of media, including CDs and BD (Blu-ray discs). WMA (Windows Media Audio) One of the compressed digital audio formats developed by Microsoft Corporation. With psychoacoustic technologies, this compression method achieves a high compression rate. Reportedly, it is capable of compressing data quantity by about 1/20 maintaining a certain level of audio quality. MP3 One of the compressed digital audio format used by MPEG. With psychoacoustic technologies, this compression method achieves a high compression rate. Reportedly, it is capable of compressing data quantity by about 1/10 maintaining a certain level of audio quality. Lip sync Video output sometimes lags behind audio output due to the complexity of signal processing caused by an increase in video signal capacity. Lip sync is a technique for automatically correcting the timing lag between audio and video output. HDMI INFORMATION HDMI HDMI (High-Definition Multimedia Interface) is the world-wide standard interface for digital audio/video signal transmission. This interface transmits both digital audio and digital video signals using a single cable without any loss. HDMI complies with HDCP (High-bandwidth Digital Content Protection) and provides a secure audio/video interface. For further information on HDMI, visit the HDMI website at "http://www.hdmi.org/". GLOSSARY HDCP This Soundbar is compatible with the follow resolutions: HDCP (High-bandwidth Digital Content Protection) is a digital copy protection form  VGA  720p/60 Hz, 50 Hz HDMI).  480i/60 Hz  1080i/60 Hz, 50 Hz HDMI CEC CONTROL  480p/60 Hz  1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz  576i/50 Hz  4K/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz that prevents copying of digital contents as it travels across connections (such as HDMI CEC Control allows you to operate external devices via HDMI. If you connect a TV that supports HDMI CEC control to the Soundbar with an HDMI cable, you can control the Soundbar (such as power and volume) with TV remote control operations.  576p/50 Hz Operation available from the TVâs remote control: HDMI (ARC) Â6WDQGE\V\QFKURQL]DWLRQ Â9ROXPHFRQWUROLQFOXGLQJPXWH Audio signal types HDMI SIGNAL Audio Signals Audio signal types Audio signal formats Compatible media 2ch Linear PCM 2ch, 32-192 kHz, 16/24 bit CD, DVD-Video, DVD-Audio, etc. Multi-ch Linear PCM 7ch, 32-192 kHz, 16/24 bit DVD-Audio, Blu-ray disc, HD DVD, etc. Bitstream (SD Audio) Dolby Digital, DTS Audio signal formats Compatible media 2ch Linear PCM 2ch, 32-96 kHz, 16/24 bit TV Bitstream (5.1ch) Dolby Digital, DTS Digital TV DIGITAL AUDIO SIGNAL Â237,&$/&2$;,$/ Audio signal types Audio signal formats Compatible media 2ch Linear PCM 2ch, 32-96 kHz, 16/24 bit CD, DVD-Video, DVD-Audio, etc. Bitstream (5.1ch) Dolby Digital, DTS Digital DVD-Video, etc. DVD-Video, etc. Dolby Audio, Dolby Digital, DTS DIGITAL, DTS-HD Bitstream (HD Audio) High Resolution Audio, Blu-ray disc, HD DVD DTS-HD Master Audio, DTS: X Â5HIHUWRGRFXPHQWDWLRQVXSSOLHGZLWKWKHSOD\EDFNGHYLFHDQGVHWWKHGHYLFH appropriately. Â7RGHFRGHDXGLRELWVWUHDPVLJQDOVRQWKLVXQLWVHWWKHLQSXWVRXUFHGHYLFH appropriately so that the device outputs the bitstream audio signals directly. Refer to documentation supplied with the device for details. What is aptXâ˘? QualcommÂŽ aptX⢠audio technology enhances the wireless sound quality of many of the worldâs finest smartphones, speakers, headphones and tablets. Previously, these devices often had a reputation for providing average quality sound via Bluetooth, but with aptX, Bluetooth-enabled products can overcome that barrier and consistently deliver higher quality audio wirelessly. aptX is a key product differentiator in productsâwhere the ability to have a true audiophile experience is paramount. 41 SPECIFICATIONS SOUNDBAR DRIVERS CONNECTIVITY Left & Right 2 x 2.5â Full Range Drivers Center 2 x 2.5â Full Range Drivers Surround Left & Right 2 x 2.5â Full Range Drivers 2 x 1â High Frequency Tweeter HDMI Out (ARC to TV) x 1 [HDCP 2.2] HDMI Input x 3 (4K HDR Pass Thru) [HDCP 2.2] OPTICAL Input x 1 COAXIAL Input x 1 Analog AUX Audio Input x 1 BLUETOOTH 4.1, aptX USB x 1 SATELLITE DRIVERS AUDIO PROCESSING Surround Back Left & Right 1 x 3â Full Range Drivers (Each side) 1 x 1â High Frequency Tweeter (Each side) Dolby Audio DTS Digital DTS-HD High Resolution Audio DTS-HD Master Audio DTS: X WIRELESS SUBWOOFER 1 x 8â Down-Firing Driver (Each side) DIMENSIONS, WEIGHT & POWER PERFORMANCE Channels: 7.2 Discreet Sound Pressure Level SPL: 106 dB RMS Power: 220 W Frequency Response: 35Hz â 20 kHz Peak Powering Handling: 800 W REMOTE CONTROL 52 Keypads, Backlit LED 6 EQ Modes â Movie, Music, Sports, News, Game, Clear Voice. 42 Soundbar: 45.5 x 3.3 x 3.0 Inch, 7.27 lb. Subwoofer: 9.5 x 12 x 20.5 Inch, 19 lb. Each Satellite: 5.0 x 5.4 x 8 Inch, 2.8 lb. Each RMS Power Output: 90 W (Soundbar) 15W x 2 (Satellite Speakers) 50W x 2 (Subwoofer) Voltage Soundbar: 100 â 240V, 50/60 Hz Subwoofer: 110 - 240V, 50/60Hz LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, whick can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the userâs authority to operate the equipment. Notice: trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. 1. The changes or modifications not expressly approved by the party responsible for compliance could void the userâs authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. RF Exposure Information This device meets the governmentâs requirements for exposure to radio waves. This deviceis designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S.Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, DTS:X, and the DTSX logo are registered trademarks or trademarks of DTS, Inc. in the United States Qualcomm aptX is a product of Qualcomm and/or other countries. Š DTS, Inc. All Rights Technologies International, Ltd. Reserved. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are States and other countries, used with permission. Disposal and Recycling You must dispose of this product properly,according to local laws and regulations. Because this product contains electronic components and a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Nakamichi LLC is under license.Other trademarks and trade names are those of their respective owners. 43 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prĂŠsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisĂŠe aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, (2) l'utilisateur de l'appareil doit accepter tout brouillage radioĂŠlectrique subi, mĂŞme si le brouillage est susceptible d'en compromettre le fonctionnement. Le dispositif rencontre l'exemption des limites courantes d'ĂŠvaluation dans la section 2.5 de RSS 102 et la conformitĂŠ Ă l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformitĂŠ de rf.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : User Create Date : 2017:09:08 15:24:07+08:00 Modify Date : 2017:09:08 15:25:31+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : 7.2 ifu 0814-- Creator : User Creator Tool : Adobe Illustrator CS6 (Windows) Metadata Date : 2017:09:08 15:25:31+08:00 Thumbnail Width : 160 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 19681 bytes, use -b option to extract) Original Document ID : uuid:9E3E5C9A8C81DB118734DB58FDDE4BA7 Document ID : xmp.did:E7C32553C980E7118EFDAAF34900D62B Instance ID : uuid:e3756ff1-019c-4556-8b21-8ccf125bfb58 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:E6C32553C980E7118EFDAAF34900D62B Derived From Document ID : xmp.did:E6C32553C980E7118EFDAAF34900D62B Derived From Original Document ID: uuid:9E3E5C9A8C81DB118734DB58FDDE4BA7 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:2765FD3BB36DE711B617B88FD9B3494B, xmp.iid:E7C32553C980E7118EFDAAF34900D62B History When : 2017:07:21 09:23:43+08:00, 2017:08:14 16:36:20+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference Manifest Reference File Path : C:\Users\ethy.art\Desktop\7.2 ifu\left side of box 100.eps Startup Profile : Basic RGB N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Max Page Size W : 210.001652 Max Page Size H : 144.998557 Max Page Size Unit : Millimeters Font Name : ArialMT, Arial-ItalicMT, Arial-BoldMT, MyriadPro-Regular, MyriadPro-Semibold, MyriadPro-Bold, TransponderAOE Font Family : Arial, Arial, Arial, Myriad Pro, Myriad Pro, Myriad Pro, Transponder AOE Font Face : Regular, Italic, Bold, Regular, Semibold, Bold, Regular Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, TrueType Font Version : Version 5.10, Version 5.08, Version 5.08, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Macromedia Fontographer 4.1.2 11/7/00 Font Composite : False, False, False, False, False, False, False Font File Name : arial.ttf, ariali.ttf, arialbd.ttf, MyriadPro-Regular.otf, MyriadPro-Semibold.otf, MyriadPro-Bold.otf, TRANA_.TTF Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Process Black M, PANTONE 185 CVC, PANTONE 7540 C Swatch Groups Colorants L : 33.333298 Swatch Groups Colorants A : -1 Swatch Groups Colorants B : -4 Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : 灰色 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: R=242 G=242 B=242 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 6.292802 Swatch Groups Colorants Magenta : 4.788297 Swatch Groups Colorants Yellow : 4.788297 Swatch Groups Colorants Black : 0.000000 Producer : Acrobat Distiller 11.0 (Windows) Page Count : 45EXIF Metadata provided by EXIF.tools