Welcat XIT100BW Barcode Reader with 802.11b&Bluetooth; Transmitters User Manual

Welcat, Inc. Barcode Reader with 802.11b&Bluetooth; Transmitters Users Manual

1. User Manual 1 of 2
2. User Manual 2 of 2

User Manual 2 of 2

Download:
Mirror Download [FCC.gov]
Document ID	613366
Application ID	qCmyD2yUuMgDOHONoPxxbw==
Document Description	User Manual 2 of 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	269.08kB (3363440 bits)
Date Submitted	2005-12-20 00:00:00
Date Available	2005-12-20 00:00:00
Creation Date	2005-12-14 16:34:46
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-12-14 16:34:46
Document Title	Users Manual.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	12871

3-10 Network Menu
ÂłÂÂąÂ° ĂĂĽĂ´ĂˇĂŻĂ˛ĂŤ ĂĂĽĂŽĂľ
Network related setting such as TCP/IP.
1. From the System menu, select "3:Network".
Select the item to setup.
Ë ĂĂĂÂŻĂĂ
Ë ĂĂĂĂ
Ë ĂĂĂ
Ë ĂĂĂ
Ë ĂĂĂĂ
ÂłÂÂąÂ°ÂÂą ĂĂĂÂŻĂĂ
Set an IP address and other details for TCP/IP communications. Automatic setup is possible when the DHCP
function is enabled.
1. From the Network, select "1:TCP/IP".
Current setting contents are displayed.
Select the item to setup.
2. Input the address.
Input the number from 000 to 255 to the field segmented by
the period (exampleČ192.168.254.254).
* The Display is an example of "IP address". "NetMask" and
"Gateway" is operated in the same way.
3-33ÄĄ
Chapter 3 System menu
ËĂĂ ĂĄĂ¤Ă¤Ă˛ĂĽĂłĂł
Set the IP address assigned by the network administrator. Set a unique IP address to each of the
XIT-100-BW terminals connected to the same network.
ËĂĂĽĂ´ĂĂĄĂłĂŤ Â¨ĂĂľĂ˘ĂŽĂĽĂ´ ĂĂĄĂłĂŤÂŠ
Set the subnet mask assigned by the network administrator. Since a subnet mask specifies which
network you belong to, it should set up along with the IP address.
ËĂĂĄĂ´ĂĽĂˇĂĄĂš Â¨ĂĂĽĂŚĂĄĂľĂŹĂ´ Ă§ĂĄĂ´ĂĽĂˇĂĄĂšÂŠ
Set the address of the default gateway. Setup is required when connecting to a different network
through a router.
Ë ĂĂĂ
The maximum length of IP packet. 1500 octets (bytes) is common for Ethernet. In such cases as
being used over the routers, this value should be modified according to the communication media. Please ask the network administrator about the value settings for different items.
ĂĂ¨ĂĽĂŽ Ă´Ă¨ĂĽ ĂłĂ´ĂĄĂ´ĂľĂł ĂŻĂŚ Ă´Ă¨ĂĽ ĂĂ ĂĄĂ¤Ă¤Ă˛ĂĽĂłĂł ĂŠĂł ĂÂ°Â°Â°ÂŽÂ°Â°Â°ÂŽÂ°Â°Â°ÂŽÂ°Â°Â°ĂÂŹĂ´Ă¨ĂĽ ĂĂĂĂ
ĂŁĂŻĂĂĂľĂŽĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ ĂŠĂł ĂľĂŽĂĄĂ˘ĂŹĂĽ Ă´ĂŻ Ă˘ĂĽ ĂĽĂ¸ĂĽĂŁĂľĂ´ĂĽĂ¤ÂŽ
ĂĂŹĂĽĂĄĂłĂĽ ĂĄĂłĂŤ Ă´Ă¨ĂĽ ĂŽĂĽĂ´ĂˇĂŻĂ˛ĂŤ ĂĄĂ¤ĂĂŠĂŽĂŠĂłĂ´Ă˛ĂĄĂ´ĂŻĂ˛ ĂĄĂ˘ĂŻĂľĂ´ Ă´Ă¨ĂĽ ĂśĂĄĂŹĂľĂĽ ĂłĂĽĂ´Ă´ĂŠĂŽĂ§Ăł ĂŚĂŻĂ˛
Ă¤ĂŠĂŚĂŚĂĽĂ˛ĂĽĂŽĂ´ ĂŠĂ´ĂĽĂĂłÂŽ
ĂĂ˛ĂŻĂ Ă´Ă¨ĂĽ Â˘ĂĂ´ĂĄĂ˛Ă´ĂľĂ° Ă´ĂšĂ°ĂĽÂ˘ ĂŻĂŚ ĂĂĂĂ ĂłĂĽĂ´Ă´ĂŠĂŽĂ§ Â¨ĂÂŽÂłÂÂłÂľÂŠÂŹ ĂŠĂŽ ĂŁĂĄĂłĂĽ ĂĽĂŠĂ´Ă¨ĂĽĂ˛
Â˘ĂĂ°Ă°ĂŹĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ Ă˘ĂŻĂŻĂ´Â˘ ĂŻĂ˛ Â˘ĂĂšĂłĂ´ĂĽĂ ĂĂĽĂŽĂľ Ă˘ĂŻĂŻĂ´Â˘ ĂŠĂł ĂłĂĽĂŹĂĽĂŁĂ´ĂĽĂ¤ÂŹ Ă´Ă¨ĂĽ ĂśĂĄĂŹĂľĂĽ
ĂĽĂ¸ĂŁĂĽĂ°Ă´ ĂŚĂŻĂ˛ ĂĂĂ ĂŁĂĄĂŽ ĂŻĂŽĂŹĂš Ă˘ĂĽ ĂŁĂŻĂŽĂŚĂŠĂ˛ĂĂĽĂ¤ Ă˘ĂľĂ´ ĂľĂŽĂĄĂ˘ĂŹĂĽ Ă´ĂŻ Ă˘ĂĽ ĂĂŻĂ¤ĂŠĂŚĂŠĂĽĂ¤ÂŽ
ÂłÂÂąÂ°ÂÂ˛ ĂĂĂĂ
Set the DHCP client function that is used for automatic setup of TCP/IP and various set items.
1. From the Network menu, select "2:DHCP."
Select the item to setup.
Ë ĂĂ´ĂĄĂ˛Ă´ĂľĂ° Ă´ĂšĂ°ĂĽ
Ë ĂĂ°Ă¤ĂĄĂ´ĂĽ Ă°Ă˛ĂŻĂ´ĂĽĂŁĂ´
Ë ĂĂĽĂ˛ĂśĂĽĂ˛ Ă°ĂŻĂ˛Ă´
3-34ÄĄ
3-10 Network Menu
ÇŞĂĂ´ĂĄĂ˛Ă´ĂľĂ° Ă´ĂšĂ°ĂĽ
1. Select the item to setup.
Ë ĂĂŠĂłĂĄĂ˘ĂŹĂĽĂ¤ Â¨ĂĂĄĂŁĂ´ĂŻĂ˛Ăš ĂłĂĽĂ´ĂľĂ°ÂŠ
DHCP is not executed when the terminal started up.
Ë ĂĂ°Ă°ĂŹĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ Ă˘ĂŻĂŻĂ´
DHCP is executed before the application is executed.
The application file is selected from [1:System], and then[2:Auto execute], DHCP function
is executed before application , after the terminal started up. In
addition, when the application is started up from ,
DHCP is not executed.
Ë ĂĂšĂłĂ´ĂĽĂ ĂĂĽĂŽĂľ Ă˘ĂŻĂŻĂ´
DHCP is executed before System menu is started up. The System menu is selected from [1:System], and
then[1:Auto execute], DHCP function is executed before System menu is started up , after the terminal started up.
ÇŞĂĂ°Ă¤ĂĄĂ´ĂĽ Ă°Ă˛ĂŻĂ´ĂĽĂŁĂ´
Following information unique to the terminal is setup so as not to be modified, before executing
DHCP function.
Ë ĂĂ ĂĄĂ¤Ă¤Ă˛ĂĽĂłĂł
Ë ĂĂĽĂ´ĂĂĄĂłĂŤ
Ë ĂĂĄĂ´ĂĽĂˇĂĄĂš
Ë ĂĂ
ĂĂŽ Ă´Ă¨ĂĽ ĂŁĂĄĂłĂĽ ĂˇĂ¨ĂĽĂŽ Ă´Ă¨ĂĽ ĂŁĂ¨ĂĽĂŁĂŤ ĂŠĂł ĂĄĂ°Ă°ĂŹĂŠĂĽĂ¤ Ă´ĂŻ ĂĂ ĂĄĂ¤Ă¤Ă˛ĂĽĂłĂł Â¨ĂĂ ĂĄĂ¤Ă¤Ă˛ĂĽĂłĂł ĂľĂ°Â
Ă¤ĂĄĂ´ĂĽ ĂŠĂł Ă°Ă˛ĂŻĂ¨ĂŠĂ˘ĂŠĂ´ĂĽĂ¤ÂŠÂŹ Ă´Ă¨ĂĽ ĂĂ ĂĄĂ¤Ă¤Ă˛ĂĽĂłĂłÂŹ ĂˇĂ¨ĂŠĂŁĂ¨ Ă¨ĂĄĂł ĂłĂĽĂ´ ĂľĂ° ĂĄĂ´ Ă´Ă¨ĂĽ Ă´ĂĽĂ˛ĂĂŠĂŽĂĄĂŹÂŹ ĂŠĂł
ĂŽĂŻĂ´ ĂĂŻĂ¤ĂŠĂŚĂŠĂĽĂ¤ÂŽ ĂĂĽ ĂłĂľĂ˛ĂĽ Ă´ĂŻ ĂľĂłĂĽ ĂŁĂŻĂŽĂŚĂŠĂ˛ĂĂŠĂŽĂ§ Ă´Ă¨ĂĄĂ´ Ă´Ă¨ĂĽ Ă´Ă¨ĂĽĂ˛ĂĽ ĂŠĂł ĂŽĂŻ Ă¨ĂŻĂłĂ´ ĂˇĂŠĂ´Ă¨
Ă´Ă¨ĂĽ ĂłĂĄĂĂĽ ĂĂ ĂĄĂ¤Ă¤Ă˛ĂĽĂłĂł ĂŻĂŽ Ă´Ă¨ĂĽ ĂĂĽĂ´ĂˇĂŻĂ˛ĂŤÂŽ
ÇŞĂĂĽĂ˛ĂśĂĽĂ˛ Ă°ĂŻĂ˛Ă´ ĂŽĂľĂĂ˘ĂĽĂ˛
DHCP server port is setup (Factory setupČ08067).
If you do not execute the automatic setup, which is unique to the XIT-100-BW, and want to use existing server only to perform the assigning of IP address, the value is modified (the well known port is
67).
ĂĂ¨ĂĽ Ă°ĂŻĂ˛Ă´ ĂŽĂľĂĂ˘ĂĽĂ˛ ĂŻĂŚ Ă´Ă¨ĂĽ ĂĂĂĂ ĂłĂĽĂ˛ĂśĂĽĂ˛ ĂŻĂŚ Â˘ĂĂĽĂ˘ĂĂŹĂŠĂ¤ĂĽĂ˛ÂĂÂ˘ ĂĂĽĂ´ĂˇĂŻĂ˛ĂŤ
ĂĂĄĂŽĂĄĂ§ĂĽĂ˛ ĂŠĂł Â°Â¸Â°ÂśÂˇ ĂĄĂł Ă¤ĂĽĂŚĂĄĂľĂŹĂ´ÂŽ ĂĂ¨ĂŠĂł ĂŠĂł Ă´ĂŻ ĂĄĂśĂŻĂŠĂ¤ ĂĄ ĂŁĂŻĂĂ°ĂĽĂ´ĂŠĂ´ĂŠĂŻĂŽ ĂˇĂŠĂ´Ă¨
ĂŻĂ´Ă¨ĂĽĂ˛ ĂĂĂĂ ĂłĂĽĂ˛ĂśĂĽĂ˛Ăł ĂˇĂŻĂ˛ĂŤĂŠĂŽĂ§ ĂŠĂŽ Ă´Ă¨ĂĽ ĂłĂĄĂĂĽ ĂŽĂĽĂ´ĂˇĂŻĂ˛ĂŤÂŽ
ÇŞĂĂ¸ĂĽĂŁĂľĂ´ĂĽ
Press the
key, and, DHCP is executed immediately, regardless of "Startup type"(P.3-35).
3-35ÄĄ
Chapter 3 System menu
ÂłÂÂąÂ°ÂÂł ĂĂĂ
Set up for using the FTP client function, as described below. Automatic setup is possible when the DHCP function is enabled.
1. From the Network, select "3:FTP".
Select the item to setup.
Ë ĂĂĽĂ˛ĂśĂĽĂ˛ ĂĄĂ¤Ă¤Ă˛ĂĽĂłĂł
Ë ĂĂłĂĽĂ˛ ĂŽĂĄĂĂĽ
Ë ĂĂĄĂłĂłĂˇĂŻĂ˛Ă¤
Ë ĂĂ¤ĂśĂĄĂŽĂŁĂĽĂ¤
ÇŞĂĂĽĂ˛ĂśĂĽĂ˛ ĂĄĂ¤Ă¤Ă˛ĂĽĂłĂł
Set up the host name for FTP server.
1. Select from either IP, or, URL.
Ë ĂĂ¤Ă¤Ă˛ĂĽĂłĂł
The IP address setup at 2:IP" is set as FTP server.
Ë ĂĂĄĂĂĽ
The host specified at "3: host name" is set as FTP server.
The host name can not contain the space character.
ĂĂ¨ĂĽĂŽ ĂľĂłĂŠĂŽĂ§ Â˘ĂĂĄĂĂĽÂ˘ÂŹ Ă°ĂŹĂĽĂĄĂłĂĽ Ă°ĂĽĂ˛ĂŚĂŻĂ˛Ă Ă´Ă¨ĂĽ ĂĂĂ ĂłĂĽĂ´ĂľĂ° Â¨ĂÂŽÂłÂÂłÂšÂŠÂŽÂ˘
3-36ÄĄ
3-10 Network Menu
ÇŞĂĂłĂĽĂ˛ ĂŽĂĄĂĂĽ
Specify the FTP server login user name using up to 18 alphanumeric characters, and upper-case/lower-case should be distinguished.
1. Input the User name.
User name should not include the space.
ÇŞĂĂĄĂłĂłĂˇĂŻĂ˛Ă¤
Specify the FTP server login password using up to 20 alphanumeric characters, and upper-case/lower-case should be distinguished.
1. Input the Password.
The Password is converted to a hidden character (*) and is
displayed for security purpose.
Password should not include the space.
ÇŞĂĂ¤ĂśĂĄĂŽĂŁĂĽĂ¤
3-37ÄĄ
Chapter 3 System menu
Ç´ĂĂĽĂ˛ĂśĂĽĂ˛ Ă°ĂŻĂ˛Ă´
Specify FTP server control port number. The well-known port is 21.
Ç´ĂĂŻĂ¤ĂĽ
The default is Passive mode. If the FTP server does not support Passive mode, change it to the Active
mode.
ĂĂ¨ĂĽĂ˛ĂĽ ĂŠĂł ĂĄ ĂŚĂľĂŽĂŁĂ´ĂŠĂŻĂŽ Ă´ĂŻ Ă˛ĂĽĂŞĂĽĂŁĂ´ Ă´Ă¨ĂĽ ĂŁĂŻĂŽĂŽĂĽĂŁĂ´ĂŠĂŻĂŽ ĂŚĂ˛ĂŻĂ ĂŻĂľĂ´ĂłĂŠĂ¤ĂĽ Ă´Ă¨ĂĽ ĂĂŠĂ˛ĂĽĂˇĂĄĂŹĂŹ
Ă´ĂŻ ĂŠĂŽĂłĂŠĂ¤ĂĽ ĂŠĂŽ Ă´Ă¨ĂĽ ĂĂŠĂ˛ĂĽĂˇĂĄĂŹĂŹ ĂłĂĽĂ´ ĂľĂ°ÂŽ ĂĂŚ Ă´Ă¨ĂŠĂł ĂŚĂľĂŽĂŁĂ´ĂŠĂŻĂŽ ĂŠĂł ĂĽĂŽĂĄĂ˘ĂŹĂĽĂ¤ÂŹ Ă´Ă¨ĂĽ ĂĂĂ
ĂŁĂŻĂĂĂľĂŽĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ ĂŁĂĄĂŽĂŽĂŻĂ´ Ă˘ĂĽ Ă°ĂĽĂ˛ĂŚĂŻĂ˛ĂĂĽĂ¤ ĂŠĂŽ Ă´Ă¨ĂĽ ĂĂŁĂ´ĂŠĂśĂĽ ĂĂŻĂ¤ĂĽÂŽ ĂĂš ĂľĂłĂŠĂŽĂ§
ĂĂĄĂłĂłĂŠĂśĂĽ ĂĂŻĂ¤ĂĽÂŹ Ă´Ă¨ĂĽ ĂŁĂŻĂĂĂľĂŽĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ Ă˘ĂĽĂ´ĂˇĂĽĂĽĂŽ Ă´Ă¨ĂĽ ĂĂĂ ĂłĂĽĂ˛ĂśĂĽĂ˛ ĂŻĂśĂĽĂ˛ Ă´Ă¨ĂĽ
ĂĂŠĂ˛ĂĽĂˇĂĄĂŹĂŹÂŽ
Ç´ĂĂŻĂŹĂ¤ĂĽĂ˛
ËĂĂľĂ˛Ă˛ĂĽĂŽĂ´
/(root)
In some FTP server, the User name folder is specified as root folder.
/(user name)
The folder in the root folder with the same as the user name of the FTP server is specified as the
current folder. If FTP function (file transmission or reception) is executed without setting the
user name, the error screen appears.
/(Specified)
The relative path setup at the "specified folder" which is to be explained later becomes the current folder.
ËĂĂ°ĂĽĂŁĂŠĂŚĂŠĂĽĂ¤
When selected "/(Specified)" in the folder above, the character string setup here are added to the
FTP method "CWD". As the setup character string communicates directly by FTP communication, please setup the corresponding character string to the server.
(Example) "dir1/dir2/dir3"
The specified folder cannot include the space.
3-38ÄĄ
3-10 Network Menu
ÂłÂÂąÂ°ÂÂ´ ĂĂĂ
Set the DNS server address, as described below. Automatic setup is possible when the DHCP function (P.3-34)
is enabled.
1. From the Network, select "4:DNS".
2. Select the item to setup.
Ç´ĂĂ˛ĂŠĂĂĄĂ˛Ăš
Set the IP address for the Primary server.
Ç´ĂĂĽĂŁĂŻĂŽĂ¤ĂĄĂ˛Ăš
Set the IP address for the Secondary server.
Ç´ĂĂ¤ĂśĂĄĂŽĂŁĂĽĂ¤
Ë ĂĂĽĂ˛ĂśĂĽĂ˛ Ă°ĂŻĂ˛Ă´
Specify the control port number for the DNS server. The well-known port is 53.
Ë ĂĂŠĂĂĽ ĂŻĂľĂ´ Ă´ĂŠĂĂĽ
Setup range is from 1 to 99 seconds. Set the response packet waiting time.
Ë ĂĂ˛ĂŠĂĄĂŹ ĂŁĂŻĂľĂŽĂ´
When 0 is set, only one packet is transmitted without RETRY.
Ë ĂĂĄĂŁĂ¨ĂĽ Ă´ĂŠĂĂĽ
Setup range is from 0 to 9999 min. When 0 is setup, the cache function is disabled. The MAX
value allowed to enter to the cache table is 8. When the entered number is over the MAX value,
a new entry will be performed after discarding the old entry.
3-39ÄĄ
Chapter 3 System menu
ÂłÂÂąÂ°ÂÂľ ĂĂĂĂ
Make the various SNMP settings. Automatic setup is possible when the DHCP function (P.3-34) is enabled.
1. From the Network, select "5ČSNMP".
Select the item to setup.
Ë ĂĂŻĂĂĂľĂŽĂŠĂ´ĂšÂ¨ĂÂŻĂĂŽĂŹĂšÂŠ ĂłĂĽĂ´Ă´ĂŠĂŽĂ§
Ë ĂĂŻĂĂĂľĂŽĂŠĂ´ĂšÂ¨ĂÂŻĂÂŠ ĂĂĽĂ´ĂľĂ°
Ë ĂĂ˛ĂĄĂ°
Ë ĂĂ¤ĂśĂĄĂŽĂŁĂĽĂ¤
ÇŞĂĂŻĂĂĂľĂŽĂŠĂ´ĂšÂ¨ĂÂŻĂĂŽĂŹĂšÂŠ ĂłĂĽĂ´Ă´ĂŠĂŽĂ§
1. Input the community name and the manager IP address.
Ç´ĂĂŻĂĂĂľĂŽĂŠĂ´Ăš ĂŽĂĄĂĂĽ
The operations permitted for a community name are read only. GET and GET-NEXT requests are
supported under a community name. When a SET request is sent using a community name, an authentication trap is transmitted. A community name can be specified using a maximum of 16 alphanumeric
characters.
Ç´ĂĂĄĂŽĂĄĂ§ĂĽĂ˛ ĂĂ ĂĄĂ¤Ă¤Ă˛ĂĽĂłĂł
Set the SNMP manager's IP address, which permits the use of the community name set under the
"Community name" option. If "000.000.000.000" is set as the IP address, this community name is
permitted on all the SNMP managers.
3-40ÄĄ
3-10 Network Menu
ÇŞĂĂŻĂĂĂľĂŽĂŠĂ´ĂšÂ¨ĂÂŻĂÂŠ ĂĂĽĂ´ĂľĂ°
1. Input the community name and the manager IP address.
Ç´ĂĂŻĂĂĂľĂŽĂŠĂ´Ăš ĂŽĂĄĂĂĽ
The operations permitted for the community name are "Read-Write".
GET, GET-NEXT and SET request are supported under a community name. The community name
can be specified using a maximum of 16 alphanumeric characters.
Ç´ĂĂĄĂŽĂĄĂ§ĂĽĂ˛ ĂĂ ĂĄĂ¤Ă¤Ă˛ĂĽĂłĂł
Set the SNMP manager's IP address, which permits The use of the community name set under the
[community name]option. If "000.000.000.000" is set as the SNMP manager's IP address, this community name is permitted on all the SNMP managers.
ÇŞĂĂ˛ĂĄĂ° ĂłĂĽĂ´Ă´ĂŠĂŽĂ§
1. Input a community name and a manager IP address.
Ç´ĂĂŻĂĂĂľĂŽĂŠĂ´Ăš ĂŽĂĄĂĂĽ
Set a community name for the Trap. A community name can be specified using a maximum of 16 alphanumeric characters.
Ç´ĂĂĄĂŽĂĄĂ§ĂĽĂ˛ ĂĂ ĂĂ¤Ă¤Ă˛ĂĽĂłĂł
Set the SNMP manager's IP address to which the Trap should be transmitted. Trap is not transmitted if
the IP address of "000.000.000.000" has been set.
3-41ÄĄ
Chapter 3 System menu
ÇŞĂĂ¤ĂśĂĄĂŽĂŁĂĽĂ¤
Ç´ĂĂľĂ´Ă¨ĂĽĂŽĂ´ĂŠĂŁÂŽ Ă´Ă˛ĂĄĂ°
Set the action of authentication trap to either "send" or "don't send" when access is recognized except
from the community name and SNMP manager's IP address set in "1: Community (R/Only)" and "2:
Community (R/W)." This Trap is sent to the SNMP manager, which is set in "2:Target address."
Ç´ĂĂ§ĂĽĂŽĂ´ Ă°ĂŻĂ˛Ă´
The port number to communicate with SNMP manager. The well-known port is 161.
Ç´ĂĂ˛ĂĄĂ° Ă°ĂŻĂ˛Ă´
The port number to transmit the Trap. The well-known port is 162.
Ç´ĂĂ˛ĂĄĂ° Ă˛ĂĽĂ´Ă˛Ăš
The number of times Trap transmission retrial.
ÇŞĂĂ˘ĂŻĂľĂ´ ĂĂĂĂ
Č XIT-100-BW can be managed by using Our "WebGlider-X"(WBG-001W).
Č SNMP-PDU(Protocol Data Unit) conforms to SNMPv1.
Č XIT-100-BWsupports the management of the objects in the following MIB group.
[1.3.6.1.2.1.1]
[1.3.6.1.2.1.2]
[1.3.6.1.2.1.4]
[1.3.6.1.2.1.5]
[1.3.6.1.2.1.6]
[1.3.6.1.2.1.7]
[1.3.6.1.2.1.11]
[1.3.6.1.4.1.12392]
MIB2-System
MIB2-Interfaces
MIB2-IP
MIB2-ICMP
MIB2-TCP
MIB2-UDP
MIB2-SNMP
Welcat Enterprise MIB
Welcat Enterprise MIB is described by ASN.1 format.
Welcat Enterprise MIB is included in the optional "WebGlider-X". (About details, please contact our sales department.)
3-42ÄĄ
3-10 Network Menu
Ç´ĂĂľĂ°Ă°ĂŻĂ˛Ă´ĂĽĂ¤ ĂĂ˛ĂĄĂ°Ăł
Cold Start
Cold Start Transmitted after MIB is initialized and the communications
starts. MIB is initialized when the XIT-100-BW has been turned ON using the PW key. Note that MIB is not initialized when the XIT-100-BW
has been turned ON in the resume mode.
Warm Start
Warm Start Transmitted when communication starts except Cold Start.*1
Link up
Link up Transmitted when XIT-100-BW synchronizes with an access
point. However, a Link Up is not transmitted when the XIT-100-BW
synchronizes with an access point for the first time (When a Cold Start or
a Warm Start is transmitted). When the XIT-100-BW newly enters a service area of an access point and synchronizes, or when it synchronizes
with a new access point while roaming, a Link Up is transmitted (in the
same timing as signal SIGRFU_INSYNC).
Link down
Link down Transmitted when the communication ends. However, it is
not transmitted when the XIT-100-BW is outside the service area of an
access point.
Authentication
Transmitted when a third person tries to access the XIT-100-BW with an
invalid community. This authentication trap is sent to the IP address set
through the System menu "Trap Manager IP address" (P.3-41). However,
this is transmitted only when the value "send" is set through the System
menu "Illegal access Trap" (P.3-42).
*1
MIB is not initialized even if the " XIT-100-BW " setup corresponding to MIB (IP address,
subnet mask, default gateway, etc.) has been changed. In this case, a Warm Start is transmitted
instead of a Cold Start. When initializing MIB, restart the terminal.
3-43ÄĄ
Chapter 3 System menu
ÂłÂÂąÂą ĂĂĽĂŁĂĽĂŠĂśĂŠĂŽĂ§ ĂĂĽĂŽĂľ
Receiving files via WLAN, or Bluetooth. The XIT-100-BW can receive files transmitted from a host computer
via WLAN, or Bluetooth.
Before receiving a file, please check the following. The received files are all created in the F drive.
Ç´ĂĂĂĂ
Č The communication setting (IP address, SSID, WEP etc.) between the XIT-100-BW and the Access
point are correctly set up.
Č The power of the access point and host computer is ON.
Č
Č
Č
Č
The access point and host computer is correctly setup or connected.
The access point is normally operating.
FTP server is running on the host computer.
FTP setup (host name, user name etc.) of XIT-100-BW is correctly setup.
Ç´ĂĂŹĂľĂĽĂ´ĂŻĂŻĂ´Ă¨Â¨ĂĂĽĂŁĂĽĂŠĂśĂŠĂŽĂ§ ĂłĂŠĂ¤ĂĽ ĂŠĂł Ă´Ă¨ĂĽ Ă¨ĂŻĂłĂ´ ĂŁĂŻĂĂ°ĂľĂ´ĂĽĂ˛ÂŠ
Č The power of the host computer is ON.
Č The "BluePorter(WLF-001:optional)" on the host computer is started up.
Č The default device of XIT-100-BW is setup on the host computer at the receiving side. (only in the
case selected from the file list)
Ç´ĂĂŹĂľĂĽĂ´ĂŻĂŻĂ´Ă¨Â¨ĂĂĽĂŁĂĽĂŠĂśĂŠĂŽĂ§ ĂłĂŠĂ¤ĂĽ ĂŠĂł ĂĂĂÂÂąÂ°Â°ÂĂĂÂŠ
Č Wait only is enabled.
Č The default device of XIT-100-BW is setup on the XIT-100-BW at the receiving side.
1. From the System menu, select "4:Receive".
Select the device to use.
Ë ĂĂĂĂ o ÂłÂŽ
Ë ĂĂŹĂľĂĽĂ´ĂŻĂŻĂ´Ă¨ o Â˛ÂŽ
3-44ÄĄ
3-11 Receiving Menu
2. Selecting receiving method.
Select "1: Select from list " to obtain the file list from the transmission side. The receiver side can select the file to receive from the list.
Select "2:Wait(PC)" or "3:Wait(XIT)â, then get into receiving waiting status immediately. If it is the transmission from the host computer select "2:Wait(PC)", when it is from XIT, Select
"3:Wait(XIT)". The receiving file depends on the transmission side.
Ë Âąá´ˇĂĂĽĂŹĂĽĂŁĂ´ ĂŚĂ˛ĂŻĂ Ă´Ă¨ĂĽ ĂŚĂŠĂŹĂĽ ĂŹĂŠĂłĂ´o Âł
Ë Â˛á´ˇĂĂĄĂŠĂ´Â¨ĂĂÂŠÂŹ Âłá´ˇĂĂĄĂŠĂ´Â¨ĂĂĂÂŠo Â´ÂŽ
3. Acquire the file list, and select receiving file.
Apply checks to the check box of the receiving file.
Press the
key, and Receiving Confirmation dialog is displayed.
In this case, if there is no file that the check is applied, Selected file is
received. Select from[Yes][No].
In addition, Press the
Press the
key, and [No] is selected.
key, and Sub menu to operate the file lists displayed.
ËÂ˘ĂĂľĂŹĂŹ ĂŽĂĄĂĂĽÂ˘
Selected file name is displayed.
ËÂ˘ĂĂŹĂŹ ĂŁĂ¨ĂĽĂŁĂŤĂł ĂĄĂ°Ă°ĂŹĂŠĂĽĂ¤Â˘
Apply checks to all the check boxes of the file list.
ËÂ˘ĂĂŹĂŹ ĂŁĂ¨ĂĽĂŁĂŤĂł Ă˛ĂĽĂĂŻĂśĂĽĂ¤Â˘
Remove checks from all the check boxes of the file list.
4. Receiving start.
Receiving status is displayed.
When there is a same file name as that of receiving file, overwriting
confirmation dialog is displayed.
Select[Yes]or [No].
In addition, press the
key, and [No] is selected.
3-45ÄĄ
Chapter 3 System menu
5. Receiving is completed.
When many files are checked,"(the number of success/ the number of
checked)" is displayed in the Message box.
Press the
3-46ÄĄ
key, or
key.
3-12 File Menu
ÂłÂÂąÂ˛ ĂĂŠĂŹĂĽ ĂĂĽĂŽĂľ
By searching the targeted file, varieties of operations such as transmission and Deletion are performed.
Select the file for operation from the classified file list in each drive.
The files are recognized by the extensions (3 characters following after the period of the file name), and classified as below.
ĂĂ¸Ă´ĂĽĂŽĂłĂŠĂŻĂŽ
ĂĂŠĂŽĂ¤ ĂŻĂŚ ĂĄ ĂŚĂŠĂŹĂĽ
OUT
Application
WAV, MP3, SFL
Audio
BMP
Bitmap
Others
Data
Operation is that can be executed are as follows. There are operations that are related to some specific files and
the operation enabled in all files.
ĂĂ°ĂĽĂ˛ĂĄĂ´ĂŠĂŻĂŽ
*1
Execute
*1*3
*1
*2
*3
ĂĂ˘ĂŻĂľĂ´
Starting up the application. Only the application files can be operated.
Play
Play audio file. Only audio files can be operated.
Viewer*2
Bitmap images displayed. Only bitmap files can be operated.
Properties
Various kind of properties related to the file are displayed.
Upload
Uploading a file.
Delete
Deleting a file.
Test
Check if a file is broken or not.
All checks applied.
Apply checks on all check boxes in the file list.
All checks removed
Remove all checks of the check box in the list.
The file in the S drive Operation is disabled.
Supported Bitmap file is as follows.
Format
Windows Bitmap monochrome image
Size
132Ă128 pixel fixed
Supported audio file is as follows.
Extension
WAV
Format
Windows Standard WAVE Format
Audio sampling rate
8000/11025/16000/22050/44100/48000[Hz]
Channels
Monaural
Audio samples size
16bit
Audio style
PCM
Extension
MP3
Format
MPEG-1 Audio Layer-3
Audio sampling rate
44100/48000[Hz]
3-47ÄĄ
Chapter 3 System menu
Bit rate
32/40/48/56/64/80/96/112/128/160/192/224/256/320(kbps)
Channels
Monaural/Stereo
Extension
SFL
Format
Audio file list (text style)
MAX items
32
Explanation
By using SFL file, many audios and files can be played continuously.
In the file list, the file name is cited by line feeding to the MAX 32 items.
The cited audio file should be stored in the terminal beforehand.
The file names written in the file list are all played only once.
When an Error occurred during playing, the audio file play will stop and
will not play any more.
It is impossible to cite other SFL file inside the SFL file.
Description example
ALARM_MELODY.WAV(Changing line)
LOCATION_3F_2.WAV(Changing line)
SHIP_ERROR.WAV
1. From the System menu, select "5:file ".
Select the kind of the file for Operation. Select "All types ", regardless of the kind of the file all files stored in the drives targeted.
2. Selecting a drive.
F Drive becomes the current drive.
When there is no file stored in the F Drive, S Drive will be the current drive.
Each time by pressing the
3-48ÄĄ
key, the current drive changes.
3-12 File Menu
3. File operation.
File alone check box operation (apply checks /remove checks) is performed by the
key.
For other operation, press the
the Operation.
key, From the Sub menu, Select
Ë ĂĂ¸ĂĽĂŁĂľĂ´ĂĽ
Ë ĂĂŹĂĄĂš
Ë ĂĂŠĂĽĂˇĂĽĂ˛
Ë ĂĂ˛ĂŻĂ°ĂĽĂ˛Ă´ĂŠĂĽĂł
Ë ĂĂ°ĂŹĂŻĂĄĂ¤
Ë ĂĂĽĂŹĂĽĂ´ĂĽ
ËĂĂĽĂłĂ´
Ë ĂĂŹĂŹ ĂŁĂ¨ĂĽĂŁĂŤĂł ĂĄĂ°Ă°ĂŹĂŠĂĽĂ¤
Ë ĂĂŹĂŹ ĂŁĂ¨ĂĽĂŁĂŤĂł Ă˛ĂĽĂĂŻĂśĂĽĂ¤
ÇŞĂĂ¸ĂĽĂŁĂľĂ´ĂĽ
1. From the Sub menu, select "Execute".
ĂĂĽĂ§ĂĄĂ˛Ă¤ĂŹĂĽĂłĂł ĂŻĂŚ ĂŁĂ¨ĂĽĂŁĂŤ Ă˘ĂŻĂ¸ ĂłĂ´ĂĄĂ´ĂľĂłÂŹ ĂĂĽĂŹĂĽĂŁĂ´ĂĽĂ¤ ĂĄĂ°Ă°ĂŹĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ
ĂŠĂł ĂĽĂ¸ĂĽĂŁĂľĂ´ĂĽĂ¤ÂŽ
When an SFL file application to be executed is not registered in the
Automatic Launch, register confirmation dialog is displayed.
In addition, Press the
key, and [No] is selected.
After selecting, execute the program. To end the application, perform
the operation specified for each application. After termination,
whether the System menu is displayed again or, the power of the terminal turns off is depends on the application.
When the battery lost its power, the alarm appears and the power of
the terminal turns OFF. If you want to stop the application by force,
key continuously for 10 seconds while it is running.
press the
3-49ÄĄ
Chapter 3 System menu
ÇŞĂĂŹĂĄĂš
1. From the sub menu, select "Play".
ĂĂĽĂ§ĂĄĂ˛Ă¤ĂŹĂĽĂłĂł ĂŻĂŚ Ă´Ă¨ĂĽ ĂŁĂ¨ĂĽĂŁĂŤ Ă˘ĂŻĂ¸ ĂłĂ´ĂĄĂ´ĂľĂłÂŹ ĂĂĽĂŹĂĽĂŁĂ´ĂĽĂ¤ ĂĄĂľĂ¤ĂŠĂŻ
ĂŚĂŠĂŹĂĽ Ă°ĂŹĂĄĂšĂłÂŽ
Press the
key to stop and playing.
ÇŞĂĂŠĂĽĂˇĂĽĂ˛
1. From the Sub menu, select "Viewer".
ĂĂĽĂ§ĂĄĂ˛Ă¤ĂŹĂĽĂłĂł ĂŻĂŚ Ă´Ă¨ĂĽ ĂŁĂ¨ĂĽĂŁĂŤ Ă˘ĂŻĂ¸ ĂłĂ´ĂĄĂ´ĂľĂłÂŹ ĂĂĽĂŹĂĽĂŁĂ´ĂĽĂ¤ Ă˘ĂŠĂ´ĂĂĄĂ°
ĂŚĂŠĂŹĂĽ ĂŠĂł Ă¤ĂŠĂłĂ°ĂŹĂĄĂšĂĽĂ¤ÂŽ
Press any key to return to the previous operation.
ÇŞĂĂ˛ĂŻĂ°ĂĽĂ˛Ă´ĂŠĂĽĂł
1. From the Sub menu, select "Properties".
ĂĂĽĂ§ĂĄĂ˛Ă¤ĂŹĂĽĂłĂł ĂŻĂŚ Ă´Ă¨ĂĽ ĂŁĂ¨ĂĽĂŁĂŤ Ă˘ĂŻĂ¸ ĂłĂ´ĂĄĂ´ĂľĂłÂŹ ĂĂĽĂŹĂĽĂŁĂ´ĂĽĂ¤ ĂŚĂŠĂŹĂĽÂ§Ăł
Ă°Ă˛ĂŻĂ°ĂĽĂ˛Ă´ĂŠĂĽĂł ĂĄĂ˛ĂĽ Ă¤ĂŠĂłĂ°ĂŹĂĄĂšĂĽĂ¤ÂŽ
Following properties are displayed.
Č
Č
Č
Č
Č
File name
File type
File size
Last modified
Library version(application only)
Press any key, to return to the previous operation.
3-50ÄĄ
3-12 File Menu
ÇŞĂĂ°ĂŹĂŻĂĄĂ¤
When uploading, please check the following beforehand.
Ç´ĂĂĂĂ
Č The communication setting (IP address, SSID, WEP etc.) between the XIT-100-BW and the
Access point are correctly set up.
Č The power of the access point and host computer is ON.
Č The access point and host computer is correctly setup or connected.
Č The access point is normally operating.
Č FTP server is running on the host computer.
Č FTP setup (host name, user name etc.) of XIT-100-BW is correctly setup.
Ç´ĂĂŹĂľĂĽĂ´ĂŻĂŻĂ´Ă¨Â¨ĂĂĽĂŁĂĽĂŠĂśĂŠĂŽĂ§ ĂłĂŠĂ¤ĂĽ ĂŠĂł Ă´Ă¨ĂĽ Ă¨ĂŻĂłĂ´ ĂŁĂŻĂĂ°ĂľĂ´ĂĽĂ˛ÂŠ
Č The power of the host computer is ON.
Č The "BluePorter(WLF-001:optional)" on the host computer is started up.
Č The default device of XIT-100-BW is setup on the host computer at the receiving side.
Ç´ĂĂŹĂľĂĽĂ´ĂŻĂŻĂ´Ă¨Â¨ĂĂĽĂŁĂĽĂŠĂśĂŠĂŽĂ§ ĂłĂŠĂ¤ĂĽ ĂŠĂł ĂĂĂÂÂąÂ°Â°ÂĂĂÂŠ
Č The default device of XIT-100-BW is setup on the XIT-100-BW at the receiving side.
1. From the sub menu, select "Upload".
Upload the file with whose check box is checked.
However, when there is no file whose check box is checked, Selected
file is uploaded.
2. Select the device to use.
3-51ÄĄ
Chapter 3 System menu
3. Upload start.
Upload status is displayed.
4. Upload is completed.
When many files are checked, (the number of upload success / the
number of checked items)" is displayed in the "Message box".
Press the
key, or
key.
ÇŞĂĂĽĂŹĂĽĂ´ĂĽ
1. From the sub menu, select "Delete".
Delete the file whose check box is checked.
However, if there is no checked file, Selected file is deleted.
Confirmation dialog is displayed. Select[Yes]or [No].
In addition, Press the
3-52ÄĄ
key, and [No] is selected.
3-12 File Menu
ÇŞĂĂĽĂłĂ´
Test the file whose check box is checked.
However, if there is no checked file, Selected file is tested.
When the tested file is broken, file delete confirmation dialog is displayed. Select[Yes][No].
In addition, press the
key, and [No] is selected.
When[Yes]is selected, the file is deleted immediately.
When [No] is selected, nothing will be performed.
After the Select, restart the next file testing.
ĂĂŚ Ă´Ă¨ĂĽ Ă˘Ă˛ĂŻĂŤĂĽĂŽ ĂŚĂŠĂŹĂĽ ĂŠĂł ĂľĂłĂĽĂ¤ ĂĄĂł ĂŠĂ´ ĂŠĂłÂŹ ĂĄĂŽ ĂľĂŽĂĽĂ¸Ă°ĂĽĂŁĂ´ĂĽĂ¤ ĂĄĂŁĂŁĂŠĂ¤ĂĽĂŽĂ´ ĂłĂľĂŁĂ¨ ĂĄĂł Ă´Ă¨ĂĽ
ĂĄĂ°Ă°ĂŹĂŠĂŁĂĄĂ´ĂŠĂŻĂŽÂ§Ăł Ă˛ĂľĂŽĂŽĂŠĂŽĂ§ ĂŻĂľĂ´ ĂŻĂŚ ĂŁĂŻĂŽĂ´Ă˛ĂŻĂŹ ĂĄĂŽĂ¤ ĂłĂŻ ĂŻĂŽÂŽ ĂĂ´ ĂŠĂł ĂłĂ´Ă˛ĂŻĂŽĂ§ĂŹĂš Ă˛ĂĽĂŁÂ
ĂŻĂĂĂĽĂŽĂ¤ĂĽĂ¤ Ă´ĂŻ Ă¤ĂĽĂŹĂĽĂ´ĂĽ Ă´Ă¨ĂĽ Ă˘Ă˛ĂŻĂŤĂĽĂŽ ĂŚĂŠĂŹĂĽÂŽ
ÇŞĂĂŹĂŹ ĂŁĂ¨ĂĽĂŁĂŤĂł ĂĄĂ°Ă°ĂŹĂŠĂĽĂ¤
1. From the Sub menu, select "All checks applied".
Check all the check boxes.
3-53ÄĄ
Chapter 3 System menu
ÇŞĂĂŹĂŹ ĂŁĂ¨ĂĽĂŁĂŤĂł Ă˛ĂĽĂĂŻĂśĂĽĂ¤
Remove the check from all the check boxes.
3-54ÄĄ
3-13 ID Menu
ÂłÂÂąÂł ĂĂ ĂĂĽĂŽĂľ
Setup the ID number for identification. Setup the unique number for each terminal. When DHCP function is enabled automatic setup is also possible.
1. From the System menu, select "6:ID".
Input the terminal ID.
The number of ID allowed to set is from 000 to 999.
3-55ÄĄ
Chapter 3 System menu
ÂłÂÂąÂ´ ĂĂĽĂśĂŠĂŁĂĽ ĂĂĽĂŽĂľ
Setup the hardware device such as Barcode and key. The Device Menu is further classified for each devices.
1. From the System menu, select "7:device".
Select the item to setup.
Ë ĂĂĄĂ˛ĂŁĂŻĂ¤ĂĽ
Ë ĂĂĽĂš
Ë ĂĂŹĂľĂĽĂ´ĂŻĂŻĂ´Ă¨
Ë ĂĂŠĂłĂ°ĂŹĂĄĂš
Ë ĂĂŻĂŽĂĽÂŻĂĂŠĂ˘Ă˛ĂĄĂ´ĂŻĂ˛
ÂłÂÂąÂ´ÂÂą ĂĂĄĂ˛ĂŁĂŻĂ¤ĂĽ
1. From the Device Menu, select "1:Barcode".
Select the item to setup.
Ë ĂĂ˛ĂŠĂ§Ă§ĂĽĂ˛ ĂĂŻĂ¤ĂĽ
Ë ĂĂĽĂŁĂŻĂ¤ĂĽ ĂŹĂĽĂśĂĽĂŹ
Ë ĂĂŁĂĄĂŽ ĂĄĂŽĂ§ĂŹĂĽ
Ë ĂĂĽĂśĂĽĂ˛ĂłĂĽ
3-56ÄĄ
3-14 Device Menu
ÇŞĂĂ˛ĂŠĂ§Ă§ĂĽĂ˛ ĂĂŻĂ¤ĂĽ
This mode is used to setup the operational condition of the laser scanner on the System menu or the
XIT-100-BW browser.
This setup is only enabled with the application using "Trigger mode" for barcode scanning.
WebGlider-X browser is one of the applications using trigger mode.
1. Select the item to setup.
Select the item to setup.
Ë ĂĂ˛ĂŠĂ§Ă§ĂĽĂ˛ ĂŻĂ°ĂĽĂ˛ĂĄĂ´ĂŠĂŻĂŽ
Ë ĂĂŻĂˇĂĽĂ˛ ĂłĂĄĂśĂŠĂŽĂ§
Ë ĂĂ˛Ă˛ĂĄĂ¤ĂŠĂĄĂ´ĂŠĂŻĂŽ Ă´ĂŠĂĂĽ
Ç´ĂĂ˛ĂŠĂ§Ă§ĂĽĂ˛ ĂŻĂ°ĂĽĂ˛ĂĄĂ´ĂŠĂŻĂŽ
Setup the operation of the scan key and the irradiation pattern of the laser. A barcode can be scanned
when the irradiation of the laser is turned ON
1. From the sub menu, select the item.
Ë ĂĂŻĂ˛ĂĂĄĂŹ
Press the scan key, and the laser irradiates.
Ë ĂĂŻĂľĂ˘ĂŹĂĽ
Press the scan key, and the laser blinks. Press again, the laser irradiates.
Ë ĂĂĽĂŹĂĽĂĄĂłĂĽ
Press the scan key, and the laser blinks , release the scan key, the
laser irradiates.
Ë ĂĂľĂ´ĂŻ
Regardless of scan key operation, the laser irradiates automatically.
3-57ÄĄ
Chapter 3 System menu
Ç´ĂĂŻĂˇĂĽĂ˛ ĂłĂĄĂśĂŠĂŽĂ§
Setup for saving the power consumption when scanning.
1. From the sub menu, select the item.
Ë ĂĂľĂŹĂŹ
When a Barcode is scanned the laser stops automatically and the
power supply to the scanner part stops as well. The consumed
power gets small, but it takes time to start the next scanning.
Ë ĂĂľĂŠĂŁĂŤ
When a Barcode is scanned the laser stops automatically but the
power supply to the scanner part continues as well. The consumed
power is large compared to the Full, but it can perform the next
scanning smoothly.
Ë ĂĂŻĂŽĂĽ
Power saving mode is not used.
Ç´ĂĂ˛Ă˛ĂĄĂ¤ĂŠĂĄĂ´ĂŠĂŻĂŽ Ă´ĂŠĂĂĽ
Setup the time to turn OFF the laser automatically.
1. Input the time.
The time allowed to setup is from 00 to 60 seconds.
In addition, when 00 second is setup, the laser keeps irradiating
without stop.
3-58ÄĄ
3-14 Device Menu
ÇŞĂĂĽĂŁĂŻĂ¤ĂĽ ĂŹĂĽĂśĂĽĂŹ
Setup the permissible range of the Barcode scanning.
When the Decode level is set to "strict", the barcode label checked strictly.
For this reason the label of poor quality get difficult to scan, but the possibility of miss scanning becomes low.
On the other hand, when the Decode level is set to "loose", the barcode label of comparatively poor
quality can be scanned, but the possibility of miss scanning becomes high.
Be sure to check the digit number, data etc in the check digit of the software when the "loose" is set.
1. Decode level Adjustment.
The level can be adjusted to 3 stages, "Strict", " Normal", and
âLoose".
The relationship between level value and easiness for scanning is as follows.
The scan level and miss scanning level are proportionate.
ĂĂĽĂśĂĽĂŹ ĂśĂĄĂŹĂľĂĽ
Strict
Normal
Loose
Press the
played.
ĂĂŁĂĄĂŽ Â¨ĂĂŠĂłĂł ĂłĂŁĂĄĂŽĂŽĂŠĂŽĂ§ÂŠ Ă˛ĂĄĂ´ĂĽ
Strict (difficult to miss scan)
ÉŞÉŤ
Loose (easy to miss scan)
key, and the guidance for setup value is dis-
When the level is going to setup to "loose", the guidance for
attention about miss scanning is displayed. Sekey, to select [No].
lect[Yes][No].In addition, press the
3-59ÄĄ
Chapter 3 System menu
ÇŞĂĂŁĂĄĂŽĂŽĂŠĂŽĂ§ ĂĄĂŽĂ§ĂŹĂĽ
Setup the irradiation angle of the laser.
1. Select from either Wide or Narrow.
Ë ĂĂŠĂ¤ĂĽÂ¨Ă¤ĂĽĂŚĂĄĂľĂŹĂ´ÂŠ
The irradiation angle of the laser widens.
Ë ĂĂĄĂ˛Ă˛ĂŻĂˇ
The irradiation angle of the laser becomes narrow.
ÇŞĂĂĽĂśĂĽĂ˛ĂłĂĽ
Scan setup of White/ black Reversed Barcode
1. Select from either Prohibition, or, Permission.
Ë ĂĂ˛ĂŻĂ¨ĂŠĂ˘ĂŠĂ´ĂŠĂŻĂŽ Â¨Ă¤ĂĽĂŚĂĄĂľĂŹĂ´ÂŠ
Normally, the barcode with black bar and white space only scanned.
Ë ĂĂĽĂ˛ĂĂŠĂłĂłĂŠĂŻĂŽ
The barcode with reversed white and black of bar and space only
scanned .
3-60ÄĄ
3-14 Device Menu
ÂłÂÂąÂ´ÂÂ˛ ĂĂĽĂš
Press and hold the direction ( to ) key, the direction key is allowed to enter itself repeatedly.
The time (Key repeat delay): From the time when the press and hold started until it get into the first
repeated entering, and the time (Key repeat rate): until the entering repeated.
(example) repeat delay:1 second, repeat rate:500milli seconds
1. From the Device menu, select "2: key".
Current setup contents are displayed.
Setup allowed time is from 0100 to 1000milli seconds.
In addition, when 0000milli seconds setup repeated entering is prohibited.
Press the
key, and, the guidance is for setup value is displayed.
ÂłÂÂąÂ´ÂÂł ĂĂŹĂľĂĽĂ´ĂŻĂŻĂ´Ă¨
1. From the Device menu, select "3:Bluetooth".
Select the item to setup.
Ë ĂĂŻĂŁĂĄĂŹ Ă¤ĂĽĂśĂŠĂŁĂĽ
Ë ĂĂĽĂĂŻĂ´ĂĽ Ă¤ĂĽĂśĂŠĂŁĂĽ
3-61ÄĄ
Chapter 3 System menu
ÇŞĂĂŻĂŁĂĄĂŹ Ă¤ĂĽĂśĂŠĂŁĂĽ
Local device setup.
1. Select the item to setup.
Ë ĂĂĽĂśĂŠĂŁĂĽ ĂŽĂĄĂĂĽ
Ë ĂĂĽĂŁĂľĂ˛ĂŠĂ´Ăš
Ë ĂĂĽĂ˛ĂłĂŠĂŻĂŽ
As "BD Address" is fixed, setup contents cannot be changed.
ĂĂŽĂŹĂš Ă¤ĂľĂ˛ĂŠĂŽĂ§ Ă´Ă¨ĂĽ ĂŹĂŻĂŁĂĄĂŹ Ă¤ĂĽĂśĂŠĂŁĂĽ ĂłĂĽĂ´Ă´ĂŠĂŽĂ§ÂŹ Ă´Ă¨ĂĽ ĂłĂĽĂĄĂ˛ĂŁĂ¨ ĂŚĂ˛ĂŻĂ Ă´Ă¨ĂĽ ĂĂĽĂĂŻĂ´ĂĽ
Ă¤ĂĽĂśĂŠĂŁĂĽ ĂŠĂł ĂłĂĽĂĄĂ˛ĂŁĂ¨ ĂŠĂł ĂĄĂŁĂŁĂĽĂ°Ă´ĂĽĂ¤ÂŽ ĂĂŽ ĂŻĂ´Ă¨ĂĽĂ˛ ĂŁĂĄĂłĂĽÂŹ Ă´Ă¨ĂĽ ĂłĂĽĂĄĂ˛ĂŁĂ¨ ĂŠĂł ĂŽĂŻĂ´ ĂĄĂŁÂ
ĂŁĂĽĂ°Ă´ĂĽĂ¤ÂŽ
The setup contents in each item are not saves as it is. In order to
save the setup contents, press the
key or
key, and select
[Yes] in the Save confirmation dialog.
In addition, Press the
key, and [No] is selected.
Ç´ĂĂĽĂśĂŠĂŁĂĽ ĂŽĂĄĂĂĽ
1. Input the name of the Bluetooth device.
For device name, the alphanumeric characters MAX 30 characters,
and the Upper-case character/Lower-case character is distinguished.
3-62ÄĄ
3-14 Device Menu
Ç´ĂĂĽĂŁĂľĂ˛ĂŠĂ´Ăš
Perform the authentication related setup when connecting.
1. Operate the check box to enable the authentication.
When a check box is checked, the authentication is performed in case
the local device received connect request from a Remote device.
Only the Remote device with enabled authentication will be permitted to connect.
2. PIN code setup
PIN (Personal Identification Number) code is a password used for
authentication. For this code, 16 digit characters (0 to 9, A to F) and
MAX 16 digits can be entered.
As a security measure, entered PIN code is displayed being converted
into a hidden character (*).
Ç´ĂĂĽĂ˛ĂłĂŠĂŻĂŽ
1. Check the firmware version of the built in Bluetooth device.
Press the
key, to return to the previous operation.
3-63ÄĄ
Chapter 3 System menu
ÇŞĂĂĽĂĂŻĂ´ĂĽ Ă¤ĂĽĂśĂŠĂŁĂĽ
Remote device setup.
1. Select the item to setup.
Ë ĂĂĽĂśĂŠĂŁĂĽ ĂŹĂŠĂłĂ´
Ë ĂĂĽĂĄĂ˛ĂŁĂ¨ ĂŚĂŻĂ˛ Ă¤ĂĽĂśĂŠĂŁĂĽĂł
Ë ĂĂĽĂ˛ĂŁĂ¨ ĂŻĂ°Ă´ĂŠĂŻĂŽĂł
Ç´ĂĂĽĂśĂŠĂŁĂĽ ĂŹĂŠĂłĂ´
Remote device properties to connect can be registered MAX 7 items. Once registered beforehand, you
don't have to set the device properties for each connection.
1. Select the item number to register
Select the item number, setup the device properties in order.
When device properties have already registered, the device name is
displayed to the right of the item number. When the device is not
registered, [(No Device)] is displayed to the right of the item number.
(Recognized as registered when the device name is of 1 character
more, and the BD address is other than "00:00:00:00:00:00").
The device whose item number is displayed with
to its left is a
default device. In the System menu when connecting via Bluetooth,
default device is connected to.
Press the
key, and sub menu is displayed.
Ë Â˘ĂĂĽĂŚĂĄĂľĂŹĂ´Â˘
Selected device to register is setup as a default device.
Ë Â˘ĂĂ˛ĂĄĂłĂĽÂ˘
Erase the registered device properties.
3-64ÄĄ
3-14 Device Menu
2. Select the item to setup.
Ë ĂĂĽĂśĂŠĂŁĂĽ ĂŽĂĄĂĂĽ
Ë ĂĂ ĂĂ¤Ă¤Ă˛ĂĽĂłĂł
Ë ĂĂĽĂŁĂľĂ˛ĂŠĂ´Ăš
The operation procedure of device name for security is same as that
of the local device.
Press the
key to search the Remote device. To setup the detected Remote devices the registered device is also possible.
Ç´ĂĂ ĂĂ¤Ă¤Ă˛ĂĽĂłĂł
1. Input the BD Address.
BD address is a device unique hardware address.
It is the fixed length of 16 digit character (0 to 9, A to F) 12 digits.
Ç´ĂĂĽĂśĂŠĂŁĂĽ ĂłĂĽĂĄĂ˛ĂŁĂ¨
Searches the Remote device. To setup the detected Remote device as the registered device is also possible.
ĂĂ¨ĂĽĂŽ ĂšĂŻĂľ ĂˇĂĄĂŽĂ´ Ă´ĂŻ ĂŠĂŽĂŁĂŹĂľĂ¤ĂĽ Ă´Ă¨ĂĽ ĂŻĂ´Ă¨ĂĽĂ˛ ĂĂĂÂÂąÂ°Â°ÂĂĂ ĂĄĂł Ă´Ă¨ĂĽ Ă´ĂĄĂ˛Ă§ĂĽĂ´ ĂŻĂŚ
Ă¤ĂĽĂśĂŠĂŁĂĽ ĂłĂĽĂĄĂ˛ĂŁĂ¨ÂŹ ĂŠĂ´ ĂŠĂł ĂŽĂĽĂŁĂĽĂłĂłĂĄĂ˛Ăš Ă´ĂŻ ĂłĂĽĂ´ Ă´Ă¨ĂĽ Ă´ĂĄĂ˛Ă§ĂĽĂ´ĂĽĂ¤ Ă´ĂĽĂ˛ĂĂŠĂŽĂĄĂŹ Ă´ĂŻ Â˘ĂĂŻĂŁĂĄĂŹ
ĂĂĽĂśĂŠĂŁĂĽ ĂĂĽĂ´ĂľĂ°Â˘ÂŽ
1. Search start.
Press the
key, and search to stop.
3-65ÄĄ
Chapter 3 System menu
2. The search result list is displayed.
The device name list of the detected remote device is displayed.
ĂĂ¨ĂĽ Ă¤ĂĽĂśĂŠĂŁĂĽ ĂŽĂĄĂĂĽ Ă´Ă¨ĂĄĂ´ ĂŁĂĄĂŽ Ă˘ĂĽ Ă¤ĂĽĂ´ĂĽĂŁĂ´ĂĽĂ¤ ĂŠĂł ĂŹĂŠĂĂŠĂ´ĂĽĂ¤ Ă´ĂŻ ĂĄĂŹĂ°Ă¨ĂĄĂŽĂľĂĂĽĂ˛ĂŠĂŁ
ĂŁĂ¨ĂĄĂ˛ĂĄĂŁĂ´ĂĽĂ˛ĂłÂŽ ĂĂĽ ĂłĂľĂ˛ĂĽ ĂŽĂŻĂ´ Ă´ĂŻ ĂľĂłĂĽ Ă´Ă¨ĂĽ ĂĂĄĂŽĂĄÂĂĂĄĂŽĂŞĂŠ ĂĄĂł Ă´Ă¨ĂĽ Ă¤ĂĽĂśĂŠĂŁĂĽ ĂŽĂĄĂĂĽ ĂŻĂŚ
Ă´Ă¨ĂĽ Ă¨ĂŻĂłĂ´ ĂŁĂŻĂĂ°ĂľĂ´ĂĽĂ˛ÂŽ
Press the
key, and Selected Remote device's device name and
BD address are displayed.
Press the
key, to return to the previous operation.
3. Select detected remote device.
Press the
key, and Selected Remote device's device name, BD
address are displayed.
Press the
key to return to the previous operation.
4. Select the registered number of the registered device.
When the already registered number is selected, overwriting confirmation dialog is displayed. Select [Yes][No]. In addition, press the
key, and [No] is selected.
3-66ÄĄ
3-14 Device Menu
Ç´ĂĂĽĂĄĂ˛ĂŁĂ¨ ĂŻĂ°Ă´ĂŠĂŻĂŽ
Set the upper limit of the number of Remote devices detected by device search.
1. Input the number of devices for search.
The number of devices allowed to setup is from 1 to 9.
The more the number of devices for search is the longer the search
time becomes.
3-67ÄĄ
Chapter 3 System menu
ÂłÂÂąÂ´ÂÂ´ ĂĂŠĂłĂ°ĂŹĂĄĂš
1. From the Device, select "4:Display".
Select the item to setup.
Ë ĂĂŻĂŽĂ´Ă˛ĂĄĂłĂ´
Ë ĂĂľĂĂŠĂŽĂŻĂłĂŠĂ´Ăš
ÇŞĂĂŻĂŽĂ´Ă˛ĂĄĂłĂ´
1. Display Contrast Adjustment.
The contrast of the display can be adjusted from 1 to 8.
Press the
key for Up,
key for Down, then the slider moves.
The contrast changes in real time in line with the slider's upward and
downward movement, the status of the contrast level can be checked
immediately. The relationship between level value and contrast is as
follows.
ĂĂĽĂśĂĽĂŹ ĂśĂĄĂŹĂľĂĽ
ĂĂŻĂŽĂ´Ă˛ĂĄĂłĂ´
High (thick)
Low (thin)
ÇŞĂĂĄĂŁĂŤĂŹĂŠĂ§Ă¨Ă´ ĂŹĂľĂĂŠĂŽĂŻĂłĂŠĂ´Ăš
1. Operate the check box to set high luminosity.
When check is applied the luminosity when the backlight ON becomes
high luminosity.
However, in that case check the consumed power becomes large compared to the status when the check is removed (standard luminosity).
When starts the setup the backlight turns ON automatically, the luminosity changes in real time according to the status of the check.
However, when the battery level is less than the regulated value, the
backlight will not turn ON.
3-68ÄĄ
3-14 Device Menu
ÂłÂÂąÂ´ÂÂľ ĂĂŻĂŽĂĽÂŻĂĂŠĂ˘Ă˛ĂĄĂ´ĂŻĂ˛
Setup the device such as Sound, LED and Vibrator to alert the worker's attention.
1. From the Device, select "5:Tone/Vibrator".
Select the item to setup.
Ë ĂĂŻĂŹĂľĂĂĽ
Ë ĂĂŽĂ¤ĂŠĂŁĂĄĂ´ĂŻĂ˛ ĂŚĂľĂŽĂŁ
Ë ĂĂŹĂŠĂŁĂŤ ĂłĂŻĂľĂŽĂ¤
ÇŞĂĂŻĂŹĂľĂĂĽ
1. Adjust Speaker volume.
It is adjustable from 1 to 8.
move the slider.
key for Up,
key for Down to
As the sound volume changes in real time in line with the Up and
Down movement of the slider, the status of the level value can be
checked immediately.
The relationship between the level value and sound volume is as follows.
ĂĂĽĂśĂĽĂŹ ĂśĂĄĂŹĂľĂĽ
ĂĂŻĂľĂŽĂ¤ ĂśĂŻĂŹĂľĂĂĽ
Max
Min
Set to 1, if no sound is desired.
ÇŞĂĂŽĂ¤ĂŠĂŁĂĄĂ´ĂŻĂ˛ ĂŚĂľĂŽĂŁĂ´ĂŠĂŻĂŽ
Indicator means the combination of four devices (buzzer/audio /vibrator/LED) that is used to alert the worker's
attention.
By using this indicator allows the worker to know the current status more intuitively. What indicator is used in
what situation is set up by the application. In addition, in the System menu, the "pattern 3" indicator for each
case will be applied.
For example,
Č When confirmed, one high tone sounds somewhat short and the LED green turns ON.
Č When an error occurred, vibrating the Vibrator, beep a low-pitch sound three times and turn ON the
green LED.
And so on, the terminal allows the user varieties of setting according to the user's working environment.
3-69ÄĄ
Chapter 3 System menu
There are 5 scenes that represent working such as pressing the key (click) and confirming etc. And one user's
scene, these 6scenes are provided with three patterns respectively.
1. Select the indicator to set.
The icon to show the setup status of the indicator is displayed in right
of the lower part on the display.
ČBuzzer is setup.
Ę´ČAudio is setup.
ČVibrator is setup.
ČLED is setup.
Press the
key, and sub menu is displayed.
ËÂ˘ĂĂ˛ĂĽĂśĂŠĂĽĂˇÂ˘
Current indicator can be experienced.
ËÂ˘ĂĂŽĂŠĂ´ĂŠĂĄĂŹĂŠĂşĂĽÂ˘
Select pattern setup contents are discarded to return to the initial value.
ËÂ˘ĂĂŽĂŠĂ´ĂŠĂĄĂŹĂŠĂşĂĽ ĂĄĂŹĂŹ Â˘
Discarding all setup patterns of all scenes and return to the initial value.
2. Select the device to setup.
After selecting device, setup the operational condition of the device
in order.
3-70ÄĄ
3-14 Device Menu
Ç´ĂĂ°ĂĽĂ˛ĂĄĂ´ĂŠĂŻĂŽĂĄĂŹ ĂŁĂŻĂŽĂ¤ĂŠĂ´ĂŠĂŻĂŽ ĂŻĂŚ ĂĄ Ă¤ĂĽĂśĂŠĂŁĂĽ
In the operation condition, there are two kinds, one is common to all devices and the other is unique to
the device.
1. Enable check box operation (common to all devices).
The switch to turn ON/OFF the operation of the device.
When checked, the device operates, and when the check is removed
the device does not operate unconditional to other setups.
This setup is displayed as an icon.
Press the
key, and sub menu is displayed.
ËÂ˘ĂĂ˛ĂĽĂśĂŠĂĽĂˇÂ˘
Current indicator can be experienced
ËÂ˘ĂĂŽĂŠĂ´ĂŠĂĄĂŹĂŠĂşĂĽ ĂĄĂŹĂŹ Â˘
Discarding setup contents of the pattern and return to the initial
value.
In addition, when the
Menu is displayed in the left of the lower
part of the display, the operation procedure is common to all the operational condition of devices.
2. Input the frequency (buzzer only)
Setting range is from 0000 to 9999Hz.
The contents of the function key guidance displayed in the left of the
lower part of the display changes during the frequency is entered.
Press the
played.
key, and sub menu of the frequency samples are dis-
Fine-tuning the value based on the samples facilitates the setup.
3-71ÄĄ
Chapter 3 System menu
3. Selecting a file name (audio only).
Select the audio file from the file list.
Press the
played.
key, and properties related to the selected file is dis-
Select the "built in audio ". The audio file list that is stored beforehand in the system area of the terminal is displayed.
ĂĂ¨ĂĽĂŽ ĂĄĂŽ ĂĽĂ¸Ă´ĂĽĂŽĂłĂŠĂŻĂŽ ĂłĂ°ĂĽĂŁĂŠĂŚĂŠĂĽĂł Ă´Ă¨ĂĽ ĂĂÂł ĂŻĂ˛ ĂĂĂ ĂŚĂŠĂŹĂĽ ĂŻĂŽ Ă´Ă¨ĂĽ ĂŠĂŽĂ¤ĂŠĂŁĂĄĂ´ĂŻĂ˛ÂŹ
ĂˇĂŠĂŹĂŹ ĂŽĂŻĂ´ Ă˘ĂĽ Ă°ĂŹĂĄĂšĂĽĂ¤ Ă˘Ăš Ă´Ă¨ĂĽ ĂĄĂ°Ă°ĂŹĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ ĂľĂŽĂŹĂĽĂłĂł Ă´Ă¨ĂĽ ĂĂŠĂ˘Ă˛ĂĄĂ˛Ăš ĂŹĂŠĂŽĂŤĂĽĂ¤ ĂŻĂŽ Ă´Ă¨ĂĽ
ĂĄĂ°Ă°ĂŹĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ ĂŠĂł ĂĂĽĂ˛ÂŽÂąÂŽÂąÂ° ĂŻĂ˛ ĂŹĂĄĂ´ĂĽĂ˛ÂŽ
4. Color Select (LED only).
From sub menu, select the item.
5. Input the ON time (buzzer/Vibrator/LED).
Operation time of the device for one performance.
Setting range I from 00000 to 99999milli seconds.
If 00000milli second is setup the device keeps operating.
6. Input the OFF time (buzzer/Vibrator/LED).
OFF time of the device for one performance.
The setup range is from00000 to 99999milli seconds.
If 00000milli second is setup the operation stops after the period
specified by ON time (milli seconds).
3-72ÄĄ
3-14 Device Menu
7. Input the number of times to repeat (Common to all devices).
The number of times to repeat the operation on and off.
The setup range is from 00 to 99.
If 00 is set, it repeats until the device is operated.
ÇŞĂĂŹĂŠĂŁĂŤ ĂĂŻĂľĂŽĂ¤
Setup whether to play the sound or not when the key at the terminal is pressed. The sound can be selected from "Single Beep sound" and "Numeric read out audio ". Click sound is played immediately
when the key is pressed. When a sound played by application or indicator, the latter sound interrupt
the previous sound. According to the timing, the interruption makes the sound somewhat mixed.
1. Select the sound pattern played when the key is pressed.
Ë ĂĂŻĂŽĂĽ Â¨Ă¤ĂĽĂŚĂĄĂľĂŹĂ´ÂŠ
Key Click sound is not played.
Ë ĂĂĽĂĽĂ°
For all keys the beep sound is played when any key is
pressed.
Ë ĂĂĽĂĽĂ° ÂŤ ĂĂľĂ¤ĂŠĂŻ
When numeric keys are pressed the numeric is called out in
audio (in Japanese). When other key is pressed Beep sound
is played.
Ë ĂĂľĂ¤ĂŠĂŻ
Only when the numeric keys are pressed numeric is
called out in audio. When other keys are pressed, no sound
is played.
3-73ÄĄ
Chapter 3 System menu
ÂłÂÂąÂľ ĂĂĄĂŽĂĄĂ§ĂĽ ĂĂĽĂŽĂľ
Checking the standard properties of XIT-100-BW and improvement and maintenance of the performance.
1. Select the item to setup.
Select the item to setup.
Ë ĂĂĄĂ´Ă´ĂĽĂ˛Ăš ĂŹĂĽĂśĂĽĂŹ
Ë ĂĂšĂłĂ´ĂĽĂ ĂśĂĽĂ˛ĂłĂŠĂŻĂŽĂł
Ë ĂĂŽĂŠĂ´ĂŠĂĄĂŹĂŠĂşĂĽ
Ë ĂĂŹĂŻĂŽĂĽ
Ë ĂĂ˛ĂŠĂśĂĽ
Ë ĂĂŻĂ´Ă¨Ă˘ĂĄĂŹĂŹ
Ë ĂĂŠĂşĂĄĂ˛Ă¤
ÂłÂÂąÂľÂÂą ĂĂĄĂ´Ă´ĂĽĂ˛Ăš ĂŹĂĽĂśĂĽĂŹ
Check the Battery level of the battery pack. Just look at the Battery level as a reminder.
1. From the Management select "1:Battery level".
Battery level is displayed in 6 stages.
3-74ÄĄ
3-15 Manage Menu
ÂłÂÂąÂľÂÂ˛ ĂĂšĂłĂ´ĂĽĂ ĂśĂĽĂ˛ĂłĂŠĂŻĂŽĂł
The handy terminal system program (OS) version is displayed.
1. From the Management, select "2:System versions".
OS version is displayed.
ÂłÂÂąÂľÂÂł ĂĂŽĂŠĂ´ĂŠĂĄĂŹĂŠĂşĂĽ
Initializing the Registry and the drive.
When the initialization is performed, the setup contents will return to the Factory setup and all files will be deleted. When you perform the initialization take deepest cares with this understanding.
1. From the Management, select "3:initialize".
Check the item that you want to initialize.
If no item is checked, initialization cannot be executed.
Press the
key, and execute confirmation dialog is displayed.
Select [Yes] or [No]. In addition, press the
lected.
key, and [No] is se-
3-75ÄĄ
Chapter 3 System menu
Press the
key, and sub menu is displayed.
ËÂ˘ĂĂŹĂŹ ĂŁĂ¨ĂĽĂŁĂŤĂł ĂĄĂ°Ă°ĂŹĂŠĂĽĂ¤Â˘
Apply checks to all check boxes.
ËÂ˘ĂĂŹĂŹ ĂŁĂ¨ĂĽĂŁĂŤĂł Ă˛ĂĽĂĂŻĂśĂĽĂ¤ Â˘
Remove all checks from the check boxes.
2. Initialization start.
The checked items are initialized in order.
3. Initialization is completed.
Press the
key, or
key.
When the Registry is initialized, turn off the power.
ĂĂ¨ĂĽĂŽ ĂŠĂŽĂŠĂ´ĂŠĂĄĂŹĂŠĂşĂŠĂŽĂ§ Ă´Ă¨ĂĽ ĂĂĽĂ§ĂŠĂłĂ´Ă˛ĂšÂŹ ĂŠĂŚ Ă´Ă¨ĂĽĂ˛ĂĽ ĂŠĂł ĂŽĂŻ ĂŚĂŠĂŹĂĽ ĂŠĂŽ Ă´Ă¨ĂĽ Ă Ă¤Ă˛ĂŠĂśĂĽÂŹ Ă´Ă¨ĂĽ Ă
Ă¤Ă˛ĂŠĂśĂĽ ĂˇĂŠĂŹĂŹ Ă˘ĂĽ ĂŠĂŽĂŠĂ´ĂŠĂĄĂŹĂŠĂşĂĽĂ¤ ĂĄĂľĂ´ĂŻĂĂĄĂ´ĂŠĂŁĂĄĂŹĂŹĂš ĂˇĂŠĂ´Ă¨ ĂŻĂ˛ ĂˇĂŠĂ´Ă¨ĂŻĂľĂ´ ĂŁĂ¨ĂĽĂŁĂŤÂŽ
3-76ÄĄ
3-15 Manage Menu
ÂłÂÂąÂľÂÂ´ ĂĂŹĂŻĂŽĂĽ
Copying the contents on the Registry and F drive of the other XIT-100-BW, duplication is created.
1. From the Management, select "4:Clone".
In the case of to copy XIT-100-BW, select "1:Master ".
In the case of to be duplicated on XIT-100-BW, select "2:Copy".
Ë ĂĂĄĂłĂ´ĂĽĂ˛
Ë ĂĂŻĂ°Ăš
ĂĂ¨ĂĽĂŽ ĂšĂŻĂľ Ă°ĂĽĂ˛ĂŚĂŻĂ˛Ă Ă´Ă¨ĂĽ ĂŁĂŹĂŻĂŽĂŠĂŽĂ§ Ă´ĂĄĂŤĂĽ Ă¤ĂĽĂĽĂ°ĂĽĂłĂ´ ĂŁĂĄĂ˛ĂĽ ĂˇĂŠĂ´Ă¨ ĂľĂŽĂ¤ĂĽĂ˛Â
ĂłĂ´ĂĄĂŽĂ¤ĂŠĂŽĂ§ Ă´Ă¨ĂĽ ĂŚĂŻĂŹĂŹĂŻĂˇĂŠĂŽĂ§ ĂŠĂ´ĂĽĂĂłÂŽ
Ë ĂĂŻĂ°Ăš Ă´ĂĽĂ˛ĂĂŠĂŽĂĄĂŹ Ă°ĂĽĂ˛ĂŚĂŻĂ˛ĂĂł ĂŠĂŽĂŠĂ´ĂŠĂĄĂŹĂŠĂşĂĄĂ´ĂŠĂŻĂŽ ĂŠĂŽĂłĂŠĂ¤ĂĽ Ă´Ă¨ĂĽ ĂĂŻĂ°Ăš Ă´ĂĽĂ˛ĂĂŠĂŽĂĄĂŹ
Ă˘ĂĽĂŚĂŻĂ˛ĂĽ ĂĂĽĂŁĂĽĂŠĂśĂŠĂŽĂ§ Ă´Ă¨ĂĽ Ă¤ĂĄĂ´ĂĄ ĂŚĂ˛ĂŻĂ Ă´Ă¨ĂĽ ĂĂĄĂłĂ´ĂĽĂ˛ Ă´ĂĽĂ˛ĂĂŠĂŽĂĄĂŹÂŽ ĂĂŻĂ˛ Ă´Ă¨ĂŠĂł
Ă˛ĂĽĂĄĂłĂŻĂŽ ĂˇĂ¨ĂĽĂŽ ĂĂŹĂŻĂŽĂĽ ĂŠĂł ĂŚĂĄĂŠĂŹĂĽĂ¤ÂŹ Ă´Ă¨ĂĽ ĂłĂĽĂ´ĂľĂ° ĂśĂĄĂŹĂľĂĽ ĂˇĂŠĂŹĂŹ Ă˛ĂĽĂ´ĂľĂ˛ĂŽ Ă´ĂŻ Ă´Ă¨ĂĽ
ĂĂĄĂŁĂ´ĂŻĂ˛Ăš ĂłĂĽĂ´ĂľĂ° ĂŻĂ˛ ĂĄĂŹĂŹ ĂŚĂŠĂŹĂĽĂł ĂˇĂŠĂŹĂŹ Ă˘ĂĽ Ă¤ĂĽĂŹĂĽĂ´ĂĽĂ¤ÂŽ
Ë ĂĂł Ă´Ă¨ĂĽ ĂĂŻĂ°Ăš Ă´ĂĽĂ˛ĂĂŠĂŽĂĄĂŹ Ă°ĂĽĂ˛ĂŚĂŻĂ˛ĂĂł ĂŠĂŽĂŠĂ´ĂŠĂĄĂŹĂŠĂşĂĄĂ´ĂŠĂŻĂŽ ĂĄĂ´ ĂŚĂŠĂ˛ĂłĂ´ÂŹ ĂĄĂŽĂ¤ ĂŠĂ´ ĂĂĄĂš
Ă´ĂĄĂŤĂĽ Ă´ĂŠĂĂĽ Ă´ĂŻ Ă§ĂĽĂ´ ĂŠĂŽĂ´ĂŻ Ă´Ă¨ĂĽ ĂłĂ´ĂĄĂ´ĂĽ Ă´Ă¨ĂĄĂ´ Ă´Ă¨ĂĽ ĂŁĂŹĂŻĂŽĂĽ ĂŁĂĄĂŽ Ă˘ĂĽ Ă°ĂĽĂ˛ĂŚĂŻĂ˛ĂĂĽĂ¤ÂŽ
Ë ĂĂ¨ĂĽĂŽ Ă´Ă˛ĂĄĂŽĂłĂŚĂĽĂ˛Ă˛ĂŠĂŽĂ§ Ă˛ĂĽĂ§ĂŠĂłĂ´Ă˛Ăš ĂĄĂŽĂ¤ ĂŚĂŠĂŹĂĽ ĂŚĂ˛ĂŻĂ Ă´Ă¨ĂĽ ĂĂĄĂłĂ´ĂĽĂ˛ Ă´ĂĽĂ˛ĂĂŠĂŽĂĄĂŹÂŹ
Ă°ĂĽĂ˛ĂŚĂŻĂ˛Ă ĂŁĂŹĂŻĂŽĂŠĂŽĂ§ ĂĄĂŚĂ´ĂĽĂ˛ ĂŁĂŻĂŽĂŚĂŠĂ˛ĂĂŠĂŽĂ§ Ă´Ă¨ĂĄĂ´ Ă´Ă¨ĂĽ ĂĂŻĂ°Ăš Ă´ĂĽĂ˛ĂĂŠĂŽĂĄĂŹ ĂŠĂł ĂŠĂŽ Ă´Ă¨ĂĽ
ĂŁĂŻĂŽĂ¤ĂŠĂ´ĂŠĂŻĂŽ Ă´ĂŻ Ă˘ĂĽ ĂĄĂ˘ĂŹĂĽ Ă´ĂŻ Ă°ĂĽĂ˛ĂŚĂŻĂ˛Ă Ă´Ă¨ĂĽ Â˘ĂĂŹĂŻĂŽĂĽÂ˘
3-77ÄĄ
Chapter 3 System menu
ÇŞĂĂĄĂłĂ´ĂĽĂ˛
Setup the "Copy XIT-100-BW" on the default device of the Master beforehand
1. Select the item to clone.
After confirming that the Copy terminal is in the condition to be able
to "Clone", press the
key to start Clone.
Press the
key, and sub menu is displayed.
ËÂ˘ĂĂŹĂŹ ĂŁĂ¨ĂĽĂŁĂŤĂł ĂĄĂ°Ă°ĂŹĂŠĂĽĂ¤ÂŽÂ˘
Apply checks to all check boxes.
ËÂ˘ĂĂŹĂŹ ĂŁĂ¨ĂĽĂŁĂŤĂł Ă˛ĂĽĂĂŻĂśĂĽĂ¤ Â˘
Remove all checks from check boxes.
2. Clone is completed.
Press the
3-78ÄĄ
key or
key.
3-15 Manage Menu
ÇŞĂĂŻĂ°Ăš
1. Initializing itself.
Execute confirmation dialog is displayed. Select from either [Yes] or
[No]. In addition, press the
key, and [No] is selected.
2. It is in the state the Clone is enabled.
Press the
key or
key to start Clone.
3. Confirm master display.
At the Copy terminal side, it cannot confirm that the Clone has completed, be sure to confirm that the transfer has completed on the display at the Master file. If the transfer from the Master file has not
completes, execute the Clone again.
Press the
key or
key.
Press the
key or
key.
4. Turn OFF the power.
3-79ÄĄ
Chapter 3 System menu
ÂłÂÂąÂľÂÂľ ĂĂ˛ĂŠĂśĂĽ
Confirmation of various properties and maintenance for the drive is performed.
1. From the Management, select "5:Drive".
Selecting a drive.
2. The properties of the drive are displayed.
Following properties is displayed.
ËĂĂĄĂ°ĂĄĂŁĂŠĂ´Ăš
ËĂĂłĂĽĂ¤ ĂłĂ°ĂĄĂŁĂĽ
ËĂĂ˛ĂĽĂĽ ĂłĂ°ĂĄĂŁĂĽ
ËĂĂŠĂŹĂĽĂłÂ¨ĂĂłĂĽĂ¤ ĂŽĂľĂĂ˘ĂĽĂ˛ÂŻĂĂĄĂ¸ ĂŽĂľĂĂ˘ĂĽĂ˛ÂŠ
F drive can be optimized by performing defrag.
Press the
key, and a dialog is displayed.
ËÂ˘ĂĂŻĂ˛ĂĂĄĂŹÂ˘
The unnecessary area generated in the process of writing
and/or deleting files is physically deleted.
ËÂ˘ĂĂĽĂĽĂ°Â˘
In addition to normal execute, rearranging the acquired free
area to a continuous area.
It takes some seconds to some 10 seconds to complete Deep
Execute depending on the status of the drive. Usually, Normal
Execute is recommended.
ĂĂĽĂ°ĂĽĂĄĂ´ĂĽĂ¤ ĂˇĂ˛ĂŠĂ´ĂŠĂŽĂ§ ĂĄĂŽĂ¤ Ă¤ĂĽĂŹĂĽĂ´ĂŠĂŽĂ§ ĂŻĂŚ ĂŚĂŠĂŹĂĽĂł ĂŠĂŽ Ă´Ă¨ĂĽ Ă Ă¤Ă˛ĂŠĂśĂĽ ĂĂĄĂŤĂĽĂł ĂŠĂ´Ăł ĂŁĂĄÂ
Ă°ĂĄĂŁĂŠĂ´Ăš ĂŚĂ˛ĂĄĂ§ĂĂĽĂŽĂ´ĂĽĂ¤ÂŹ ĂĄĂŽĂ¤ Ă´Ă¨ĂĽ Ă°Ă˛ĂŻĂ§Ă˛ĂĄĂ ĂŚĂŠĂŹĂĽ ĂˇĂŠĂ´Ă¨ ĂŹĂĄĂ˛Ă§ĂĽ ĂłĂŠĂşĂĽ ĂŁĂĄĂŽĂŽĂŻĂ´ Ă˘ĂĽ
ĂłĂ´ĂŻĂ˛ĂĽĂ¤ÂŽ ĂĂš Ă°ĂĽĂ˛ĂŚĂŻĂ˛ĂĂŠĂŽĂ§ Ă¤ĂĽĂŚĂ˛ĂĄĂ§ Ă´Ă¨ĂĽ ĂŚĂ˛ĂĽĂĽ ĂłĂ°ĂĄĂŁĂĽĂł ĂŠĂŽ Ă´Ă¨ĂĽ ĂŁĂĄĂ°ĂĄĂŁĂŠĂ´Ăš ĂˇĂŠĂŹĂŹ Ă˘ĂĽ
Ă˛ĂĽĂłĂŻĂŹĂśĂĽĂ¤ ĂŚĂ˛ĂŻĂ ĂŚĂ˛ĂĄĂ§ĂĂĽĂŽĂ´ĂĄĂ´ĂŠĂŻĂŽ Ă˛ĂĽĂĄĂ˛Ă˛ĂĄĂŽĂ§ĂĽĂ¤ ĂĄĂł ĂĄ ĂŁĂŻĂŽĂ´ĂŠĂŽĂľĂĽĂ¤ ĂĄĂ˛ĂĽĂĄÂŽ
ĂĂŽ ĂĄĂ¤Ă¤ĂŠĂ´ĂŠĂŻĂŽÂŹ ĂĄĂł ĂĂšĂłĂ´ĂĽĂ Ă°Ă˛ĂŻĂ§Ă˛ĂĄĂ ĂĄĂľĂ´ĂŻĂĂĄĂ´ĂŠĂŁĂĄĂŹĂŹĂš Ă°ĂĽĂ˛ĂŚĂŻĂ˛ĂĂł Ă¤ĂĽĂŚĂ˛ĂĄĂ§Ăł Ă´ĂŻ
ĂŤĂĽĂĽĂ° Ă´Ă¨ĂĽ Ă Ă¤Ă˛ĂŠĂśĂĽ ĂŠĂŽ ĂĄĂŽ ĂĄĂ°Ă°Ă˛ĂŻĂ°Ă˛ĂŠĂĄĂ´ĂĽ ĂłĂ´ĂĄĂ´ĂľĂłÂŹ ĂľĂłĂľĂĄĂŹĂŹĂš ĂŽĂŻ Ă¤ĂĽĂŚĂ˛ĂĄĂ§ ĂŠĂł Ă˛ĂĽÂ
ĂąĂľĂŠĂ˛ĂĽĂ¤ÂŽ
ĂĂ¨ĂĽĂŽ Ă´Ă¨ĂĽ Ă˘ĂĄĂ´Ă´ĂĽĂ˛Ăš Ă°ĂĄĂŁĂŤ ĂŠĂł Ă˛ĂĽĂĂŻĂśĂĽĂ¤ ĂŠĂŽ Ă´Ă¨ĂĽ ĂŁĂŻĂľĂ˛ĂłĂĽ ĂŻĂŚ Ă¤ĂĽĂŚĂ˛ĂĄĂ§ÂŹ ĂĄ ĂŚĂŠĂŹĂĽ ĂŻĂ˛
Ă´Ă¨ĂĽ ĂĂšĂłĂ´ĂĽĂ Ă°Ă˛ĂŻĂ§Ă˛ĂĄĂ ĂĂĄĂš Ă˘ĂĽ ĂŁĂŻĂ˛Ă˛ĂľĂ°Ă´ĂĽĂ¤ÂŽ ĂĂĽĂśĂĽĂ˛ Ă˛ĂĽĂĂŻĂśĂĽ Ă´Ă¨ĂĽ Ă˘ĂĄĂ´Ă´ĂĽĂ˛Ăš
Ă°ĂĄĂŁĂŤ Ă¤ĂľĂ˛ĂŠĂŽĂ§ Ă¤ĂĽĂŚĂ˛ĂĄĂ§ÂŽ
3-80ÄĄ
3-15 Manage Menu
ÂłÂÂąÂľÂÂś ĂĂŻĂ´Ă¨Ă˘ĂĄĂŹĂŹ
Setup to suppress the consumption of the battery when the XIT-100-BW is not used for a long period.
1. From the Management, select "6:Mothball".
Execute confirmation dialog is displayed. Select [Yes] or [No].
Then, press the
key, and [No] is selected.
2. Preparation for prolonged storage is complete.
Press the
key or
key.
Turn OFF the Power.
ÂłÂÂąÂľÂÂˇ ĂĂŠĂşĂĄĂ˛Ă¤
The wizard executed at the initial boot of the terminal can be called back again. In order to perform communication between the terminal and the server, the minimum necessary setting is enabled.
1. From the Management, select "7:Wizard".
Select [Yes] or [No].
Select [Yes], then perform the setup of WLAN and perform the
TCP/IP setup to execute the wizard. Select [No] to return to the previous screen.
See"3-6-4 Executing Setup Wizard"(P.3-10), for details.
3-81ÄĄ
Chapter 3 System menu
ÂłÂÂąÂś ĂĂĽĂłĂ´ ĂĂĽĂŽĂľ
Hardware device test.
1. From the System menu, Ěelect "9:Test".
Select the item to setup.
Ë ĂĂĂĂ
Ë ĂĂŹĂľĂĽĂ´ĂŻĂŻĂ´Ă¨
Ë ĂĂĄĂ˛ĂŁĂŻĂ¤ĂĽ
Ë ĂĂŠĂłĂ°ĂŹĂĄĂš
Ë ĂĂĽĂš
2. Select target device.
ÂłÂÂąÂśÂÂą ĂĂĂĂ
Test for Wireless Communications and the test for IP Network communication.
1. From the test, select "1:WLAN".
3-82ÄĄ
3-16 Test Menu
ÇŞĂĂŻĂŽĂŚĂŠĂ§ĂľĂ˛ĂĄĂ´ĂŠĂŻĂŽ
Setup the execute condition of the ping command. Wireless test is performed by ping.
1. Select "1:Configuration".
Ç´ĂĂŻĂłĂ´ ĂĄĂ¤Ă¤Ă˛ĂĽĂłĂł
Specifies the IP address of the targeted device to confirm the communication.
Ç´ ĂĂĄĂŁĂŤĂĽĂ´ ĂłĂŠĂşĂĽ Â¨Ă¤ĂĽĂŚĂĄĂľĂŹĂ´ ÂąÂ´ÂˇÂ˛ Ă˘ĂšĂ´ĂĽĂłÂŠ
Select the size of the data packet (in bytes) to be transmitted.
permissible value Č32, 64, 128, 256, 512, 1024, 1472
Ç´ĂĂŠĂĂĽ ĂŻĂľĂ´ Ă´ĂŠĂĂĽ Â¨Ă¤ĂĽĂŚĂĄĂľĂŹĂ´ Âł ĂłĂĽĂŁĂŻĂŽĂ¤ĂłÂŠ
Time out time is setup by 1 seconds unit.
permissible value Č1 to 255 seconds
Ç´ĂĂ˛ĂŠĂĄĂŹ ĂŁĂŻĂľĂŽĂ´ Â¨Ă¤ĂĽĂŚĂĄĂľĂŹĂ´ Â´ Ă´ĂŠĂĂĽĂłÂŠ
Set the number of attempts that can be made at transmitting the ping.
Setup enabled value :1 to 255 times
When 0 is specified, transmission of the ping command will continue until the
key is pressed.
3-83ÄĄ
Chapter 3 System menu
ÇŞĂĂĂĂÂŻĂ°ĂŠĂŽĂ§ Ă´ĂĽĂłĂ´
WLAN test is performed by executing the ping command. The ping packet is continuously transmitted
to the Host IP address setup at "Configuration". Displayed contents are the result of ping command,
the MAC address of the synchronized access point, communication quality (LinkQ), the received radio signal strength(ASL), applied channels and the transmission speed.
1. Select "2:WLAN/ping test".
<1st line>
The title of this test.
<2nd line> Host IP address to be communication tested
<4th line> The result is displayed.
When succeeded
Result time is displayed. (Unit: msec)
Time out
"ping Timeout" is displayed.
When interrupted by the
key
"stopped" is displayed.
<5th line > Transmitted packet number(counted up one by one) and
packet size.
<6th line> LinkQ indicator is displayed.
LinkQ (means the communication quality to the access
point) is displayed.
<7th line> Synchronized channel and the transmission speed are displayed.
<8th line> ASL indicator
ASL (means the strength of the radio signal received from
the access point) is displayed.
<10th line> MAC address of the access point while wireless communications is displayed.
ĂĂŻ Ă§ĂĽĂ´ Ă´Ă¨ĂĽ ĂłĂ´ĂĄĂ˘ĂŹĂĽ ĂĽĂŽĂŻĂľĂ§Ă¨ ĂŁĂŻĂĂĂľĂŽĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ Ă°ĂĽĂ˛ĂŚĂŻĂ˛ĂĂĄĂŽĂŁĂĽ ĂŠĂ´ ĂŠĂł Ă˛ĂĽĂŁÂ
ĂŻĂĂĂĽĂŽĂ¤ĂĽĂ¤ Ă´Ă¨ĂĄĂ´ Ă´Ă¨ĂĽ ĂŠĂŽĂ¤ĂŠĂŁĂĄĂ´ĂŻĂ˛ ĂłĂ¨ĂŻĂľĂŹĂ¤ Ă˘ĂĽ ĂĂŠĂŽĂŤĂ Â´ ĂŻĂ˛ ĂĂŻĂ˛ĂĽÂŽ
ĂĂŽ Ă´Ă¨ĂĽ ĂŁĂĄĂłĂĽ ĂŻĂŚ ĂĂĂ ĂĄĂľĂ´Ă¨ĂĽĂŽĂ´ĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ ĂŻĂ˛ ĂĂĂÂĂĂĂĂÂŹ ĂĄĂŽ ĂĽĂ˛Ă˛ĂŻĂ˛ ĂĂĽĂłĂłĂĄĂ§ĂĽ ĂŠĂł
Ă¤ĂŠĂłĂ°ĂŹĂĄĂšĂĽĂ¤ ĂˇĂ¨ĂĽĂŽ ĂĄĂľĂ´Ă¨ĂĽĂŽĂ´ĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ ĂŠĂł ĂŚĂĄĂŠĂŹĂĽĂ¤ÂŽ
ĂĂ¨ĂĽ ĂĂŠĂŽĂŤĂ ĂŠĂŽ Ă´Ă¨ĂĽ ÂśĂ´Ă¨ ĂŹĂŠĂŽĂĽ ĂĄĂŽĂ¤ Ă´Ă¨ĂĽ ĂĂĂ ĂŠĂŽĂ¤ĂŠĂŁĂĄĂ´ĂŻĂ˛ ĂŻĂŽ Ă´Ă¨ĂĽ Â¸Ă´Ă¨ ĂŹĂŠĂŽĂĽ Ă¤ĂŻ
ĂŽĂŻĂ´ ĂłĂ¨ĂŻĂˇ Ă´Ă¨ĂĽ ĂłĂ´Ă˛ĂĽĂŽĂ§Ă´Ă¨ ĂŻĂŚ Ă´Ă¨ĂĽ Ă˛ĂĄĂ¤ĂŠĂŻ ĂłĂŠĂ§ĂŽĂĄĂŹ ĂŁĂŻĂ˛Ă˛ĂĽĂŁĂ´ĂŹĂšÂŹ ĂŞĂľĂłĂ´ Ă¨ĂĄĂśĂĽ Ă´Ă¨ĂŠĂł ĂĄĂł
ĂĄ Ă˛ĂĽĂĂŠĂŽĂ¤ĂĄĂ˛ ĂŻĂŚ Ă´Ă¨ĂĽ ĂŁĂŻĂĂĂľĂŽĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ ĂłĂ´ĂĄĂ´ĂľĂłÂŽ
3-84ÄĄ
3-16 Test Menu
ÇŞĂĂ ĂĂĽĂĄĂ˛ĂŁĂ¨
To search the access point matches the SSID setup on the terminal.
When the SSID of the terminal is setup to "ANY", it is possible to search all the access points around
there.
ĂĂ¨ĂŠĂł ĂŠĂł ĂŻĂŽĂŹĂš Ă°ĂĽĂ˛ĂŚĂŻĂ˛ĂĂĽĂ¤ ĂˇĂ¨ĂĽĂŽ Ă´Ă¨ĂĽ ĂłĂĽĂ´ĂľĂ° ĂĄĂ´ Ă´Ă¨ĂĽ ĂĄĂŁĂŁĂĽĂłĂł Ă°ĂŻĂŠĂŽĂ´ÂŹ ĂŠĂł ĂłĂĽĂ´ ĂľĂ°
ĂĄĂł Ă˛ĂĽĂłĂ°ĂŻĂŽĂ¤ Ă´ĂŻ Â˘ĂĂĂÂ˘ÂŽ ĂĂ˛ĂŻĂ ĂłĂĽĂŁĂľĂ˛ĂŠĂ´ĂšÂ§Ăł Ă°ĂŻĂŠĂŽĂ´ ĂŻĂŚ ĂśĂŠĂĽĂˇÂŹ Ă´Ă¨ĂĽ Ă˛ĂĽĂłĂ°ĂŻĂŽĂłĂĽ Ă´ĂŻ
Â˘ĂĂĂÂ˘ ĂĂĄĂš Ă˘ĂĽ Ă¤ĂŠĂłĂĄĂ˘ĂŹĂĽĂ¤ÂŽ
Displayed contents as a result of searching are MAC address, channel, SSID.
1. Select "3:AP Search".
2. The result of searching is displayed after several seconds to some ten seconds.
<1st line>
The title of the test result.
<3rd line or after> The MAC address of the detected access point
and the channel number.
<10th line>
3. Press the
The key guidance that displays SSID.
key, and the SSID set up at the selected access point is displayed.
3-85ÄĄ
Chapter 3 System menu
4. Select an access point, the confirmation screen is displayed to set the SSID setup on the access
point to the terminal. Confirmation screen is displayed to allow the SSID setup on the access point
to the terminal.
ÂłÂÂąÂśÂÂ˛ ĂĂŹĂľĂĽĂ´ĂŻĂŻĂ´Ă¨
By using other terminal and Bluetooth, one to one communication is performed.
1. From the Test, select "2:Bluetooth".
Select the connecting method with Bluetooth device.
Master has the leadership on connection, and the Slave obey the
Master's direction.
The connection only performed between Master and Slave.
In addition, Master and Slave are only temporary relationship on the
connecting stage.
After the connection the relationship between the Master and Slave
will be dissolved.
ĂĂĽĂŚĂŻĂ˛ĂĽ ĂĽĂ¸ĂĽĂŁĂľĂ´ĂŠĂŽĂ§ ĂĂŹĂľĂĽĂ´ĂŻĂŻĂ´Ă¨ ĂŁĂŻĂĂĂľĂŽĂŠĂŁĂĄĂ´ĂŠĂŻĂŽÂŹ Ă´Ă¨ĂĽ ĂĂĄĂłĂ´ĂĽĂ˛ Ă¤ĂĽĂśĂŠĂŁĂĽ
ĂłĂ¨ĂŻĂľĂŹĂ¤ Ă˘ĂĽ ĂłĂĽĂ´ ĂľĂ° ĂĄĂł ĂĄ ĂĂĽĂŚĂĄĂľĂŹĂ´ ĂĂĽĂśĂŠĂŁĂĽ ĂŻĂŽ Ă´Ă¨ĂĽ ĂłĂŹĂĄĂśĂĽ Ă¤ĂĽĂśĂŠĂŁĂĽ Â¨ĂŻĂ˛ ĂĄ Ă´ĂĽĂ˛Â
ĂĂŠĂŽĂĄĂŹÂŠÂŽ ĂĂŠĂ´Ă¨ Ă˛ĂĽĂ§ĂĄĂ˛Ă¤ Ă´ĂŻ Ă´Ă¨ĂĽ ĂłĂĽĂ´Ă´ĂŠĂŽĂ§ ĂĂĽĂ´Ă¨ĂŻĂ¤ ĂŻĂŚ Ă´Ă¨ĂĽ Ă´ĂĽĂ˛ĂĂŠĂŽĂĄĂŹÂŹ Ă°ĂŹĂĽĂĄĂłĂĽ
Ă˛ĂĽĂŚĂĽĂ˛ Ă´ĂŻ Â˘ÇŞĂĂĽĂĂŻĂ´ĂĽ Ă¤ĂĽĂśĂŠĂŁĂĽÂ˘Â¨ĂÂŽÂłÂÂśÂ´ÂŠÂŽ
2. Communication test start.
Press the key, upload the corresponding key data and display on the
screen (local echo) at the same time.
When the data is received, it appears highlighted on the display.
3-86ÄĄ
3-16 Test Menu
ÂłÂÂąÂśÂÂł ĂĂĄĂ˛ĂŁĂŻĂ¤ĂĽ
Barcode scanning test perform.
In addition, this barcode scanning test is not subject to trigger mode.
1. From the test menu, select "3:Barcode".
Barcode is scanned in a normal scanning mode.
The scanned Barcode, the kind of Barcode, and the digit number are
displayed.
Press and hold the scan key for 1 second to get into the continual
scan mode.
While the scan key is pressed, the laser irradiates, and continues
scanning the barcodes. Release the scan key to return to the ordinary
scan mode.
In addition to the scanned Barcode, the kind of Barcode, and the digit
number, scan success rate is also displayed.
Press the
key to convert the character code to display.
ËÂ˘ĂĂĂĂĂÂ˘ Â¨Ă¤ĂĽĂŚĂĄĂľĂŹĂ´ÂŠ
displayed in ASCII Character code.
ËÂ˘ĂĂĂÂ˘
displayed in hexadecimal number. For example 16 digit converted from "5"to"35", "m" to "6D", 1 character is displayed as
16 digit positive 2 characters.
Each time by pressing the
key, the display switches.
3-87ÄĄ
Chapter 3 System menu
ÇŞĂĂĄĂ˛ĂŁĂŻĂ¤ĂĽ ĂĂ°Ă´ĂŠĂŻĂŽ
Press the
key to allow setting varieties of barcode options.
In addition, this setup only enabled during the barcode testing.
Ç´ĂĂ¨ĂĽĂŁĂŤ Ă¤ĂŠĂ§ĂŠĂ´
Setup whether to check the check digit.
Ë ĂĂĂ¨ĂĽĂŁĂŤ ĂĂŽĂĄĂ˘ĂŹĂĽĂ ĂŠĂł ĂłĂĽĂ´ Ă´ĂŻ ĂĂĂ Â¨Ă¤ĂĽĂŚĂĄĂľĂŹĂ´ÂŠ
The check of check digit is disabled.
Ë ĂĂĂ¨ĂĽĂŁĂŤ ĂĂŽĂĄĂ˘ĂŹĂĽĂ ĂŠĂł ĂłĂĽĂ´ Ă´ĂŻ ĂĂ
The check of check digit is enabled.
Ç´ĂĂĂÂŻĂĂĂÂŻĂĂĂ
Setup the scanning condition of add-on code of JAN/EAN/UPC.
Ë ĂĂ§ĂŽĂŻĂ˛ĂĽ ĂĂ¤Ă¤ÂĂŻĂŽ Â¨Ă¤ĂĽĂŚĂĄĂľĂŹĂ´ÂŠ
Add-on code scanning disabled.
Ë ĂĂĽĂĄĂ¤ ĂĄĂŹĂŹ
Both can be scanned unconditional whether add-on code is added.
Ë ĂĂĽĂĄĂ¤ ĂĂ¤Ă¤ÂĂŻĂŽ ĂŻĂŽĂŹĂš
JAN/EAN/UPC with add-on code only can be scanned.
Ç´ĂĂĂ
Setup the scanning condition of RSS Stacked.
Ë ĂĂ˛ĂŻĂ¨ĂŠĂ˘ĂŠĂ´ĂŠĂŻĂŽ Â¨Ă¤ĂĽĂŚĂĄĂľĂŹĂ´ÂŠ
RSS stacked scanning is disabled.
Ë ĂĂĽĂ˛ĂĂŠĂłĂłĂŠĂŻĂŽ
Scanning RSS Stacked is enabled.
3-88ÄĄ
3-16 Test Menu
ÂłÂÂąÂśÂÂ´ ĂĂŠĂłĂ°ĂŹĂĄĂš
Display test.
1. From the Test, select "4:Display".
Test the function of LCD. When test starts the backlight turns ON
automatically. However, when the Battery level is low it does not
turn ON.
Each time by pressing the key except for the
play contents switches like slides.
key, 4 kinds of dis-
1. 12 dot font-various double width character
ÉŤ
2. 16 dot font-various double width character
ÉŤ
3. The display is highlighted from four corners to the center(the
key does not work until the Display is Highlighted entirely)
ÉŤ
4. Welcat logo
When all the display ends, the backlight turns OFF to return to the
previous operation.
3-89ÄĄ
Chapter 3 System menu
ÂłÂÂąÂśÂÂľ ĂĂĽĂš
The key input test are performed with the indicator(buzzer/vibrator/LED/audio play) tests.
Press the key, and display the icon on the partition of the center got
Highlighted (
key only reversed), and the icon corresponds to the
key appears under the partition line (local eco). And the indicator
corresponding to each key operates.
The indicator assigned to each key is as follows.
ĂĂĽĂš
to
Scan key (
3-90ÄĄ
ĂĂľĂşĂşĂĽĂ˛ ĂĂŠĂ˘Ă˛ĂĄĂ´ĂŻĂ˛
ĂĂĂ
ĂĂľĂ¤ĂŠĂŻ Ă°ĂŹĂĄĂš
É
Čż
Green (SCAN) Čż
É
Čż
Red (ALRAM) Čż
, F9, F10)
Čż
É
Orange (SCAN) Čż
Čż
Čż
Red (SCAN)
Sound
Čż
Čż
Red (SCAN)
Voice (Japanese)
Čż
Čż
Red (SCAN)
Voice (Japanese)
Čż
Čż
Red (SCAN)
Voice (Japanese)
Čż
Čż
Red (SCAN)
Voice (Japanese)
Čż
Čż
Red (SCAN)
Voice (Japanese)
Čż
Čż
Red (SCAN)
Voice (Japanese)
Čż
Čż
Red (SCAN)
Voice (Japanese)
The test will end when either the
key is pressed twice, or all keys are pressed.
Such operations as power off by
tests have finished.
key or backlight adjustment by
key are enabled until all
ĂĂ¨ĂĄĂ°Ă´ĂĽĂ˛ Â´
Â´
ÄĄ
ĂĂĂ
Â¨ĂĂ˛ĂĽĂąĂľĂĽĂŽĂ´ĂŹĂš ĂĂłĂŤĂĽĂ¤ ĂĂľĂĽĂłĂ´ĂŠĂŻĂŽĂłÂŠ
Chapter4 FAQ
Â´ÂÂą ĂĂĂ
FAQ (Frequently Asked Questions)
This chapter lists frequently asked questions, problems and operations that need to be performed to solve problems, and reference pages for items in this manual.
ĂÂş ĂĂ¨ĂĽ Ă°ĂŻĂˇĂĽĂ˛ Ă¤ĂŻĂĽĂł ĂŽĂŻĂ´ Ă´ĂľĂ˛ĂŽ ĂĂÂŽ
ÇŞ ĂĂł Ă´Ă¨ĂĽ Ă˘ĂĄĂ´Ă´ĂĽĂ˛Ăš Ă°ĂĄĂŁĂŤ ĂĽĂąĂľĂŠĂ°Ă°ĂĽĂ¤ ĂŁĂŻĂ˛Ă˛ĂĽĂŁĂ´ĂŹĂšÂżÂÂÂÂÂ¨ĂÂŽÂąÂÂ´ÂŠ
ÇŞ ĂĂł Ă´Ă¨ĂĽ Ă˘ĂĄĂ´Ă´ĂĽĂ˛Ăš Ă°ĂĄĂŁĂŤ ĂŁĂ¨ĂĄĂ˛Ă§ĂĽĂ¤ÂżÂÂÂÂÂ¨ĂÂŽÂąÂÂ˛Â°ÂŠ
ÇŞ ĂĂ˛ĂĽĂŽÂ§Ă´ Ă´Ă¨ĂĽ Ă˘ĂĄĂ´Ă´ĂĽĂ˛Ăš Ă°ĂĄĂŁĂŤ ĂĽĂŹĂĽĂŁĂ´Ă˛ĂŻĂ¤ĂĽĂł Ă¤ĂŠĂ˛Ă´ĂšÂżÂÂÂÂÂ¨ĂÂŽÂąÂÂ˛ÂąÂŠ
ĂÂş ĂĂŻĂ´Ă¨ĂŠĂŽĂ§ ĂŠĂł Ă¤ĂŠĂłĂ°ĂŹĂĄĂšĂĽĂ¤ ĂŻĂŽ Ă´Ă¨ĂĽ ĂłĂŁĂ˛ĂĽĂĽĂŽÂŽ
ÇŞ ĂĂł Ă´Ă¨ĂĽ Ă˘ĂĄĂ´Ă´ĂĽĂ˛Ăš Ă°ĂĄĂŁĂŤ ĂĽĂąĂľĂŠĂ°Ă°ĂĽĂ¤ ĂŁĂŻĂ˛Ă˛ĂĽĂŁĂ´ĂŹĂšÂżÂÂÂÂÂ¨ĂÂŽÂąÂÂ´ÂŠ
ÇŞ ĂĂł Ă´Ă¨ĂĽ Ă˘ĂĄĂ´Ă´ĂĽĂ˛Ăš Ă°ĂĄĂŁĂŤ ĂŁĂ¨ĂĄĂ˛Ă§ĂĽĂ¤ÂżÂÂÂÂÂ¨ĂÂŽÂąÂÂ˛Â°ÂŠ
ÇŞ ĂĂ˛ĂĽĂŽÂ§Ă´ Ă´Ă¨ĂĽ Ă˘ĂĄĂ´Ă´ĂĽĂ˛Ăš Ă°ĂĄĂŁĂŤ ĂĽĂŹĂĽĂŁĂ´Ă˛ĂŻĂ¤ĂĽĂł Ă¤ĂŠĂ˛Ă´ĂšÂżÂÂÂÂÂ¨ĂÂŽÂąÂÂ˛ÂąÂŠ
ÂźĂĂŽ Ă´Ă¨ĂĽ ĂŁĂĄĂłĂĽ ĂˇĂ¨ĂĽĂ˛ĂĽ Ă´Ă¨ĂĽ ĂŠĂ´ĂĽĂĂł ĂĂĽĂŽĂ´ĂŠĂŻĂŽĂĽĂ¤ ĂĄĂ˘ĂŻĂśĂĽ Ă¨ĂĄĂśĂĽ Ă˘ĂĽĂĽĂŽ
ĂŁĂ¨ĂĽĂŁĂŤĂĽĂ¤ ĂĄĂŽĂ¤ Ă´Ă¨ĂĽ Ă°Ă˛ĂŻĂ˘ĂŹĂĽĂ ĂŠĂł ĂłĂ´ĂŠĂŹĂŹ ĂľĂŽĂłĂŻĂŹĂśĂĽĂ¤Âž
Please start the system menu using the following Method.
1. Remove the battery pack
2. Wait 10 seconds. Install the battery pack
3. Hold down the scan key then press the
key.
ĂÂş ĂĂŚĂ´ĂĽĂ˛ ĂŽĂŻĂ´ ĂľĂłĂŠĂŽĂ§ ĂŚĂŻĂ˛ ĂĄ ĂˇĂ¨ĂŠĂŹĂĽÂŹ Ă´Ă¨ĂĽ Ă°ĂŻĂˇĂĽĂ˛ ĂŠĂł ĂłĂ¨ĂľĂ´ ĂĂĂÂŽ
ÇŞ ĂĂł Ă´Ă¨ĂĽ Ă˘ĂĄĂ´Ă´ĂĽĂ˛Ăš Ă°ĂĄĂŁĂŤ ĂŁĂ¨ĂĄĂ˛Ă§ĂĽĂ¤ÂżÂÂÂÂÂ¨ĂÂŽÂąÂÂ˛Â°ÂŠ
ÇŞ ĂĂĄĂłĂŽÂ§Ă´ Ă´Ă¨ĂĽ ĂĂľĂ´ĂŻÂĂ°ĂŻĂˇĂĽĂ˛ÂĂŻĂŚĂŚ ĂŚĂľĂŽĂŁĂ´ĂŠĂŻĂŽ Ă˘ĂĽĂĽĂŽ ĂłĂĽĂ´ Ă´ĂŻ ĂłĂ´ĂĄĂ˛Ă´ÂżÂżÂÂÂÂÂ¨ĂÂŽÂłÂÂ˛ÂąÂŠ
ĂÂş ĂĂ´ ĂŁĂĄĂŽĂŽĂŻĂ´ ĂŁĂ¨ĂĄĂ˛Ă§ĂĽÂŽ
ÇŞ ĂĂĄĂł Ă´Ă¨ĂĽ Ă´ĂĽĂ˛ĂĂŠĂŽĂĄĂŹ Ă˘ĂĽĂĽĂŽ ĂĽĂąĂľĂŠĂ°Ă°ĂĽĂ¤ ĂˇĂŠĂ´Ă¨ Ă´Ă¨ĂĽ ĂŁĂ¨ĂĄĂ˛Ă§ĂĽĂ˛ ĂŁĂŻĂ˛Ă˛ĂĽĂŁĂ´ĂŹĂšÂż
ÇŞ ĂĂĄĂł Ă´Ă¨ĂĽ ĂŁĂ¨ĂĄĂ˛Ă§ĂĽĂ˛ Ă˘ĂĽĂĽĂŽ ĂĽĂąĂľĂŠĂ°Ă°ĂĽĂ¤ ĂˇĂŠĂ´Ă¨ Ă´Ă¨ĂĽ Ă˘ĂĄĂ´Ă´ĂĽĂ˛Ăš Ă°ĂĄĂŁĂŤ ĂŁĂŻĂ˛Ă˛ĂĽĂŁĂ´ĂŹĂšÂż
ĂĂŹĂĽĂĄĂłĂĽ Ă˛ĂĽĂŚĂĽĂ˛ Ă´ĂŻ Â˘ÂąÂÂś ĂĂ¨ĂĄĂ˛Ă§ĂŠĂŽĂ§ ĂłĂ°ĂĽĂŁĂŠĂŚĂŠĂŁĂĄĂ´ĂŠĂŻĂŽÂ˘Â¨ĂÂŽÂąÂÂąÂśÂŠÂŽ
4-2ÄĄ
4-1 FAQ
ĂÂş ĂĂ¨ĂĽ ĂĂšĂłĂ´ĂĽĂ ĂĂĽĂŽĂľ Ă¤ĂŻĂĽĂł ĂŽĂŻĂ´ ĂłĂ´ĂĄĂ˛Ă´ÂŽ
ÇŞ ĂĂł Ă´Ă¨ĂĽ Â˘ĂĄĂ°Ă°ĂŹĂŠĂŁĂĄĂ´ĂŠĂŻĂŽÂ˘ ĂłĂĽĂ´ Ă´ĂŻ Â˘ĂĂľĂ´ĂŻ ĂĽĂ¸ĂĽĂŁĂľĂ´ĂĽÂ˘ÂżÂÂÂÂÂ¨ĂÂŽÂłÂÂąÂľÂŠ
From the System menu, select "1ČSystem setup", and then select "1:Auto execute" to set the
System menu for automatic launch.
ÇŞ ĂĂŻ ĂŚĂŻĂ˛ĂŁĂĽ Ă´Ă¨ĂĽ ĂŹĂĄĂľĂŽĂŁĂ¨ ĂŻĂŚ Ă´Ă¨ĂĽ ĂĂšĂłĂ´ĂĽĂ ĂĂĽĂŽĂľÂŹ Ă¨ĂŻĂŹĂ¤ Ă´Ă¨ĂĽ ĂłĂŁĂĄĂŽ ĂŤĂĽĂš Ă´Ă¨ĂĽĂŽ Ă°Ă˛ĂĽĂłĂł Ă´Ă¨ĂĽ
ĂŤĂĽĂšÂŽÂÂÂÂÂ¨ĂÂŽÂłÂÂšÂŠ
ĂÂş ĂĂŻĂˇ Ă¤ĂŻ Ă ĂŁĂ¨ĂĄĂŽĂ§ĂĽ Ă´Ă¨ĂĽ ĂĄĂ°Ă°ĂŹĂŠĂŁĂĄĂ´ĂŠĂŻĂŽÂŹ ĂˇĂ¨ĂŠĂŁĂ¨ ĂłĂ´ĂĄĂ˛Ă´Ăł ĂˇĂ¨ĂĽĂŽ Ă´Ă¨ĂĽ
Ă°ĂŻĂˇĂĽĂ˛ ĂŠĂł Ă´ĂľĂ˛ĂŽĂĽĂ¤ ĂĂÂż
From the System Menu, select "1:System", then "1:Auto execute " to set the desired application for
automatic launch. ----(P.3-15)
ĂÂş ĂĂŻĂˇ Ă¤ĂŻ Ă ĂłĂ´ĂĄĂ˛Ă´ ĂĄĂŽĂŻĂ´Ă¨ĂĽĂ˛ ĂĄĂ°Ă°ĂŹĂŠĂŁĂĄĂ´ĂŠĂŻĂŽÂż
From the System Menu"5ČFile", select "2ČApplication " then
Menu" to run.----(P.3-49)
select "Execute"
from
"Sub
ĂÂş ĂĂ¨ĂĽ ĂĂĄĂ˛ĂŁĂŻĂ¤ĂĽ ĂŠĂł ĂŽĂŻĂ´ ĂłĂŁĂĄĂŽĂŽĂĽĂ¤ ĂłĂľĂŁĂŁĂĽĂłĂłĂŚĂľĂŹĂŹĂšÂŽ
ÇŞ ĂĂŻĂĽĂł Ă´Ă¨ĂĽ ĂłĂŁĂĄĂŽĂŽĂĽĂ¤ ĂĂĄĂ˛ĂŁĂŻĂ¤ĂĽ ĂĂĽĂĽĂ´ Ă´Ă¨ĂĽ ĂĂĄĂ˛ĂŁĂŻĂ¤ĂĽ ĂłĂĽĂ´Ă´ĂŠĂŽĂ§Ăł ĂłĂĽĂ´ ĂŠĂŽ Ă´Ă¨ĂĽ ĂĄĂ°Ă°ĂŹĂŠĂŁĂĄĂ´ĂŠĂŻĂŽÂż
Some application settings prohibit a specific kind of Barcode from being scanned.
ÇŞ ĂĂłĂŽÂ§Ă´ ĂĄ ĂłĂ°ĂĽĂŁĂľĂŹĂĄĂ˛ Ă˛ĂĽĂŚĂŹĂĽĂŁĂ´ĂŠĂŻĂŽ ĂŻĂŁĂŁĂľĂ˛Ă˛ĂŠĂŽĂ§ÂżÂÂÂÂÂ¨ĂÂŽÂąÂÂąÂ´ÂŠ
ÇŞ ĂĂł ĂłĂŁĂĄĂŽĂŽĂŠĂŽĂ§ Ă¤ĂŠĂłĂ´ĂĄĂŽĂŁĂĽ ĂŁĂŻĂ˛Ă˛ĂĽĂŁĂ´ÂżÂÂÂÂÂ¨ĂÂŽÂąÂÂąÂłÂŠ
ÇŞ ĂĂłĂŽÂ§Ă´ Ă´Ă¨ĂĽ ĂŚĂŠĂŹĂ´ĂĽĂ˛ ĂŻĂŚ Ă´Ă¨ĂĽ ĂĂĄĂ˛ĂŁĂŻĂ¤ĂĽ ĂłĂĽĂŽĂłĂŻĂ˛ Ă¤ĂŠĂ˛Ă´ĂšÂż
If the filter of the Barcode sensor is dirty, the Barcode may not be scanned correctly. Please
wipe the filter with a dry soft cloth.
ÇŞ ĂĂł Ă´Ă¨ĂĽ Ă˘ĂĄĂ˛ĂŁĂŻĂ¤ĂĽ ĂŻĂŚ Ă§ĂŻĂŻĂ¤ ĂąĂľĂĄĂŹĂŠĂ´ĂšÂż
If the barcode quality is bad, it may not scanned correctly, change the setting of the decode
level and scan again.
ĂÂş ĂĂŻĂˇ Ă¤ĂŻ Ă ĂŁĂ¨ĂĽĂŁĂŤ Ă´Ă¨ĂĽ ĂŚĂ˛ĂĽĂĽ ĂĄĂ˛ĂĽĂĄ ĂŻĂŚ ĂĄ Ă¤Ă˛ĂŠĂśĂĽÂż
From the System Menu, select "8:Manage" , then Select "5Čdrive" to check the drive----(P.3-80)
4-3ÄĄ
Chapter4 FAQ
ĂÂş Ă ĂŁĂĄĂŽĂŽĂŻĂ´ Ă°ĂĽĂ˛ĂŚĂŻĂ˛Ă ĂˇĂŠĂ˛ĂĽĂŹĂĽĂłĂł Ă¤ĂĄĂ´ĂĄ ĂŁĂŻĂĂĂľĂŽĂŠĂŁĂĄĂ´ĂŠĂŻĂŽĂłÂŽ
ÇŞ ĂĂł Ă´Ă¨ĂĽ ĂĄĂŁĂŁĂĽĂłĂł Ă°ĂŻĂŠĂŽĂ´ ĂŁĂŻĂŽĂŽĂĽĂŁĂ´ĂĽĂ¤ Ă´ĂŻ Ă´Ă¨ĂĽ ĂĂ´Ă¨ĂĽĂ˛ĂŽĂĽĂ´ ĂĂĂÂż
If the LAN cable has fallen out or a link is not established, some access points do not perform
wireless communications.
ÂźĂĂ¨ĂĽĂŽ Ă´Ă¨ĂĽ ĂĂĂĂĂ ĂĂĂ ĂŹĂŠĂ§Ă¨Ă´Ăł ĂĂÂž
ÇŞ ĂĂł Ă´ĂĽĂ˛ĂĂŠĂŽĂĄĂŹ ĂĂĂĂ ĂłĂĽĂ´Ă´ĂŠĂŽĂ§ Ă´Ă¨ĂĽ ĂłĂĄĂĂĽ ĂĄĂł Ă´Ă¨ĂĽ ĂĄĂŁĂŁĂĽĂłĂł Ă°ĂŻĂŠĂŽĂ´ ĂĂĂĂ ĂłĂĽĂ´Ă´ĂŠĂŽĂ§ĂłÂżÂÂÂÂÂ¨ĂÂŽÂłÂÂ˛Â˛ÂŠ
Please set the access point SSID and terminal SSID the same.
When the terminal SSID is set to "ANY" (blank), it may be unable to connect because of the
access point functions. Refer to the access point manual for more information.
ÇŞĂĂł Ă´Ă¨ĂĽ ĂĄĂľĂ´Ă¨ĂĽĂŽĂ´ĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ ĂłĂĽĂ´ĂľĂ° ĂŁĂŻĂ˛Ă˛ĂĽĂŁĂ´ÂżÂÂÂÂÂ¨ĂÂŽÂłÂÂ˛ÂˇÂŠ
Please set the access point Authentication System and terminal Authentication System settings
the same.
If in "SHARED" mode, please check the WEP settings.
ÇŞ ĂĂŹĂĽĂĄĂłĂĽ ĂŁĂ¨ĂĽĂŁĂŤ Ă´Ă¨ĂĽ ĂĂ˛ĂĽĂĄĂĂ˘ĂŹĂĽ ĂłĂĽĂ´Ă´ĂŠĂŽĂ§ÂŽ
XIT-100-BW's Preamble only support "Long" mode, please change the Preamble settings to
"Long" mode.
ÂźĂĂ¨ĂĽĂŽ ĂĂĂĂĂ ĂĂĂ Ă´ĂľĂ˛ĂŽĂł ĂŻĂŚĂŚ ĂŻĂ˛ Ă˘ĂŹĂŠĂŽĂŤĂłÂž
ÇŞ ĂĂ˛ĂĽ Ă´Ă¨ĂĽ ĂĂĂ ĂłĂĽĂ´Ă´ĂŠĂŽĂ§Ăł Ă´Ă¨ĂĽ ĂłĂĄĂĂĽÂż
Are the WEP keys the same? ("Null," "40bits," "128bits")
Do the WEP's Tx KEY_ID and the WEP key match? (P.3-25)
ÇŞ ĂĂŻĂĽĂłĂŽÂ§Ă´ ĂĄĂŽ ĂĄĂŁĂŁĂĽĂłĂł Ă°ĂŻĂŠĂŽĂ´ ĂˇĂŠĂ´Ă¨ ĂĄ ĂłĂĄĂĂĽ ĂŁĂ¨ĂĄĂŽĂŽĂĽĂŹ ĂŻĂ˛ ĂŠĂŽĂ´ĂĽĂ˛ĂŚĂĽĂ˛ĂŠĂŽĂ§ ĂŁĂ¨ĂĄĂŽĂŽĂĽĂŹ ĂĽĂ¸ĂŠĂłĂ´Âż
In the case where a non-interfering channel is set, a maximum of 4 access points can be used
in the one area.
ÇŞĂĂłĂŽÂ§Ă´ Ă´Ă¨ĂĽ ĂˇĂŠĂ˛ĂĽĂŹĂĽĂłĂł Ă´Ă˛ĂĄĂŽĂłĂĂŠĂłĂłĂŠĂŻĂŽ Ă˘ĂĽĂŠĂŽĂ§ ĂŠĂŽĂ´ĂĽĂ˛ĂŚĂĽĂ˛ĂĽĂ¤ Ă˘Ăš ĂĄĂŽ ĂŻĂ˘ĂłĂ´ĂĄĂŁĂŹĂĽÂż
Please check whether there is no equipment, such as a microwave oven or other WLANs etc,
which can cause interference.
Also, since a computer may act as a noise generation source, move the access point and terminal away from the computer (1m or more).
ÇŞ ĂĂ˛ĂĽĂŽÂ§Ă´ Ă´Ă¨ĂĽĂ˛ĂĽ ĂĄĂŽĂš Ă°Ă˛ĂŻĂ˘ĂŹĂĽĂĂł ĂˇĂŠĂ´Ă¨ Ă´Ă¨ĂĽ ĂĂĂÂŻĂĂ ĂłĂĽĂ´Ă´ĂŠĂŽĂ§Ăł Â¨ĂĂ ĂĄĂ¤Ă¤Ă˛ĂĽĂłĂł ĂĽĂ´ĂŁÂŠÂżÂÂÂÂÂ¨ĂÂŽÂłÂÂłÂłÂŠ
Check it to see if the terminal can connect to the computer by using the ping command etc.
4-4ÄĄ
4-1 FAQ
ĂÂş Ă ĂŁĂĄĂŽĂŽĂŻĂ´ Ă°ĂĽĂ˛ĂŚĂŻĂ˛Ă ĂĂŹĂľĂĽĂ´ĂŻĂŻĂ´Ă¨ ĂŁĂŻĂĂĂľĂŽĂŠĂŁĂĄĂ´ĂŠĂŻĂŽÂŽ
ÇŞ ĂĂĄĂł Ă´Ă¨ĂĽ ĂĂĽĂĂŻĂ´ĂĽ Ă¤ĂĽĂśĂŠĂŁĂĽ Ă´ĂŻ Ă˘ĂĽ ĂŁĂŻĂŽĂŽĂĽĂŁĂ´ĂĽĂ¤ ĂłĂĽĂ´ ĂĄĂł Ă¤ĂĽĂŚĂĄĂľĂŹĂ´ Ă¤ĂĽĂśĂŠĂŁĂĽÂżÂÂÂÂÂ¨ĂÂŽÂłÂÂśÂ´ÂŠ
ÇŞ ĂĂ˛ĂĽ Ă´Ă¨ĂĽ ĂĂĽĂĂŻĂ´ĂĽ Ă¤ĂĽĂśĂŠĂŁĂĽ Ă´ĂŻ Ă˘ĂĽ ĂŁĂŻĂŽĂŽĂĽĂŁĂ´ĂĽĂ¤ ĂĄĂŽĂ¤ Ă´Ă¨ĂĽ ĂĂĽĂŁĂľĂ˛ĂŠĂ´Ăš ĂłĂĽĂ´Ă´ĂŠĂŽĂ§ ĂŠĂ¤ĂĽĂŽĂ´ĂŠÂ
ĂŁĂĄĂŹÂżÂÂÂÂÂ¨ĂÂŽÂłÂÂśÂ˛ÂŠ
ÇŞ ĂĂĄĂł Ă´Ă¨ĂĽ ĂĂĽĂĂŻĂ´ĂĽ Ă¤ĂĽĂśĂŠĂŁĂĽ Ă´ĂŻ Ă˘ĂĽ ĂŁĂŻĂŽĂŽĂĽĂŁĂ´ĂĽĂ¤ ĂłĂĽĂ´ĂľĂ° ĂŁĂŻĂ˛Ă˛ĂĽĂŁĂ´ĂŹĂšÂż
ČDoes the Power turn ON?
ČIs the connecting enabled?
ÇŞ ĂĂł Ă´Ă¨ĂĽ ĂŁĂŻĂŽĂŽĂĽĂŁĂ´ĂŠĂŽĂ§ Ă°Ă˛ĂŻĂŁĂĽĂ¤ĂľĂ˛ĂĽ ĂŁĂŻĂ˛Ă˛ĂĽĂŁĂ´Âż
ČConnect the PC and XIT-100-BW (P.1-9)
ČCommunication between the XIT-100-BW terminals (P.3-44ČĄ46)
ČBluetooth Clone (P.3-77)
ČBluetooth Test (P.3-86)
ĂÂş ĂĂĄĂŽ Ă ĂľĂłĂĽ ĂĄĂ´ Ă´Ă¨ĂĽ ĂłĂĄĂĂĽ Ă´ĂŠĂĂĽ Ă˘ĂŻĂ´Ă¨ ĂĂĂĂ ĂĄĂŽĂ¤ ĂĂŹĂľĂĽĂ´ĂŻĂŻĂ´Ă¨ ĂŠĂŽ Ă´Ă¨ĂĽ
ĂłĂĄĂĂĽ ĂĽĂŽĂśĂŠĂ˛ĂŻĂŽĂĂĽĂŽĂ´ ĂĄĂŽĂ¤ ĂŻĂŽ Ă´Ă¨ĂĽ ĂłĂĄĂĂĽ Ă´ĂĽĂ˛ĂĂŠĂŽĂĄĂŹÂż
You can use WLAN and Bluetooth at the same time, however the communication may be delayed
due to mutual interference between wirelesses.
ĂÂş Â˘ĂĂ˛ĂŠĂ´ĂŠĂŽĂ§ ĂĂĄĂŠĂŹĂĽĂ¤Â˘ ĂˇĂĄĂł Ă¤ĂŠĂłĂ°ĂŹĂĄĂšĂĽĂ¤ Ă¤ĂľĂ˛ĂŠĂŽĂ§ Ă´Ă˛ĂĄĂŽĂłĂĂŠĂłĂłĂŠĂŻĂŽ ĂŻĂ˛ Ă˛ĂĽÂ
ĂŁĂĽĂ°Ă´ĂŠĂŻĂŽ ĂŻĂŚ ĂĄ ĂŚĂŠĂŹĂĽÂŽ
ÇŞ ĂĂ¨ĂŠĂł ĂĂĽĂłĂłĂĄĂ§ĂĽ ĂŠĂł Ă¤ĂŠĂłĂ°ĂŹĂĄĂšĂĽĂ¤ ĂˇĂ¨ĂĽĂŽ Ă´Ă¨ĂĽĂ˛ĂĽ ĂŠĂł ĂŹĂŠĂ´Ă´ĂŹĂĽ ĂłĂ°ĂĄĂŁĂĽ ĂŹĂĽĂŚĂ´ ĂŻĂŽ Ă´Ă¨ĂĽ Ă ĂĂ˛ĂŠĂśĂĽÂŽ
Create some free space on the F Drive and S Drive by deleting some files then start again.
ĂÂş Â˘ĂĂŠĂĂĽ ĂĂľĂ´Â˘ ĂˇĂĄĂł Ă¤ĂŠĂłĂ°ĂŹĂĄĂšĂĽĂ¤ Ă¤ĂľĂ˛ĂŠĂŽĂ§ Ă´Ă˛ĂĄĂŽĂłĂĂŠĂłĂłĂŠĂŻĂŽ ĂŻĂ˛ Ă˛ĂĽĂŁĂĽĂ°Ă´ĂŠĂŻĂŽ
ĂŻĂŚ ĂĄ ĂŚĂŠĂŹĂĽÂŽ
ĂĂ¨ĂŠĂł ĂĂĄĂš Ă˘ĂĽ Ă¤ĂŠĂłĂ°ĂŹĂĄĂšĂĽĂ¤ ĂĄĂŚĂ´ĂĽĂ˛ ĂĄ ĂŚĂŠĂ¸ĂĽĂ¤ Ă°ĂĽĂ˛ĂŠĂŻĂ¤ ĂŻĂŚ Ă´ĂŠĂĂĽ Ă¨ĂĄĂł Ă°ĂĄĂłĂłĂĽĂ¤ ĂˇĂ¨ĂŠĂŹĂĽ ĂŠĂŽ Ă´Ă¨ĂĽ
Ă´Ă˛ĂĄĂŽĂłĂĂŠĂłĂłĂŠĂŻĂŽ ĂŻĂ˛ Ă˛ĂĽĂŁĂĽĂ°Ă´ĂŠĂŻĂŽ ĂˇĂĄĂŠĂ´ĂŠĂŽĂ§ ĂłĂ´ĂĄĂ´ĂĽÂŽ
ÇŞ ĂĂł Ă´Ă¨ĂĽ ĂŁĂŻĂĂĂľĂŽĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ ĂłĂŻĂŚĂ´ĂˇĂĄĂ˛ĂĽ Ă˛ĂľĂŽĂŽĂŠĂŽĂ§ ĂŻĂŽ Ă´Ă¨ĂĽ Ă¨ĂŻĂłĂ´ ĂŁĂŻĂĂ°ĂľĂ´ĂĽĂ˛ÂżÂÂÂÂÂ¨ĂÂŽÂąÂÂľÂŠ
ÇŞ ĂĂł Ă´Ă¨ĂĽ ĂŁĂŻĂĂĂľĂŽĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ ĂłĂĽĂ´Ă´ĂŠĂŽĂ§Ăł ĂĂĄĂ¤ĂĽ ĂŁĂŻĂ˛Ă˛ĂĽĂŁĂ´ĂŹĂšÂżÂÂÂÂÂ¨ĂÂŽÂąÂÂľÂŠ
ÇŞ ĂĂ˛ĂĽ Ă´Ă¨ĂĽ ĂĂĂÂÂąÂ°Â°ÂĂĂ ĂĄĂŽĂ¤ Ă´Ă¨ĂĽ Ă¨ĂŻĂłĂ´ ĂŁĂŻĂĂ°ĂľĂ´ĂĽĂ˛ ĂŁĂŻĂŽĂŽĂĽĂŁĂ´ĂĽĂ¤ ĂŁĂŻĂ˛Ă˛ĂĽĂŁĂ´ĂŹĂšÂżÂÂÂÂÂ¨ĂÂŽÂąÂÂ¸ÂŠ
ÇŞ ĂĂŻĂĽĂł Ă´Ă¨ĂĽ Ă¨ĂŻĂłĂ´ ĂŁĂŻĂĂ°ĂľĂ´ĂĽĂ˛ Ă¨ĂĄĂśĂĽ ĂĽĂŽĂŻĂľĂ§Ă¨ Ă˛ĂĽĂłĂŻĂľĂ˛ĂŁĂĽĂłÂż
When applications other than the communication software are being used, the computer may
run out of resources and cause the file transmission and reception to fail. Close as many applications not needed for communication as possible, and then try again.
4-5ÄĄ
Chapter4 FAQ
ĂÂş Â˘ĂĂŻĂŽĂŽĂĽĂŁĂ´ĂŠĂŻĂŽ ĂĂĄĂŠĂŹĂĽĂ¤Â˘ ĂˇĂĄĂł Ă¤ĂŠĂłĂ°ĂŹĂĄĂšĂĽĂ¤ Ă¤ĂľĂ˛ĂŠĂŽĂ§ Ă´Ă˛ĂĄĂŽĂłĂĂŠĂłĂłĂŠĂŻĂŽ ĂŻĂ˛
Ă˛ĂĽĂŁĂĽĂ°Ă´ĂŠĂŻĂŽ ĂŻĂŚ ĂĄ ĂŚĂŠĂŹĂĽÂŽ
ÇŞ ĂĂĄĂśĂĽ Ă´Ă¨ĂĽ ĂŁĂŻĂĂĂľĂŽĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ ĂłĂĽĂ´ĂľĂ° ĂŚĂŻĂ˛ ĂˇĂŠĂ˛ĂĽĂŹĂĽĂłĂł ĂŁĂŻĂĂĂľĂŽĂŠĂŁĂĄĂ´ĂŠĂŻĂŽĂł ĂĄĂŽĂ¤ Ă´Ă¨ĂĽ ĂŽĂĽĂ´ĂˇĂŻĂ˛ĂŤ
ĂłĂĽĂ´ĂľĂ° Ă˘ĂĽĂĽĂŽ Ă°ĂĽĂ˛ĂŚĂŻĂ˛ĂĂĽĂ¤ ĂŁĂŻĂ˛Ă˛ĂĽĂŁĂ´ĂŹĂšÂżÂÂÂÂÂ¨ĂÂŽÂąÂÂ¸ÂŠ
ÇŞ ĂĂł Ă´Ă¨ĂĽ ĂĂĂ ĂłĂĽĂ˛ĂśĂĽĂ˛ Ă˛ĂľĂŽĂŽĂŠĂŽĂ§ ĂŻĂŽ Ă´Ă¨ĂĽ Ă¨ĂŻĂłĂ´ ĂŁĂŻĂĂ°ĂľĂ´ĂĽĂ˛Âż
ÇŞ ĂĂ˛ĂĽ Ă´Ă¨ĂĽ ĂĄĂŁĂŁĂĽĂłĂł Ă°ĂŻĂŠĂŽĂ´ Â¨ĂŻĂľĂ˛ Ă˛ĂĽĂŁĂŻĂĂĂĽĂŽĂ¤ĂĽĂ¤ ĂŠĂ´ĂĽĂÂŠ ĂĄĂŽĂ¤ ĂŁĂŻĂĂ°ĂľĂ´ĂĽĂ˛ ĂŁĂŻĂŽĂŽĂĽĂŁĂ´ĂĽĂ¤ ĂŁĂŻĂ˛Â
Ă˛ĂĽĂŁĂ´ĂŹĂš Ă´Ă¨Ă˛ĂŻĂľĂ§Ă¨ Ă´Ă¨ĂĽ ĂĂĂ ĂŁĂŠĂ˛ĂŁĂľĂŠĂ´ÂżÂÂÂÂÂ¨ĂÂŽÂąÂÂ¸ÂŠ
ÇŞ ĂĂĄĂśĂĽ Ă´Ă¨ĂĽ ĂĂĂ ĂłĂĽĂ´Ă´ĂŠĂŽĂ§Ăł Ă˘ĂĽĂĽĂŽ ĂĂĄĂ¤ĂĽ ĂŁĂŻĂ˛Ă˛ĂĽĂŁĂ´ĂŹĂšÂż ÂÂÂÂÂ¨ĂÂŽÂłÂÂłÂśÂŠ
ÇŞ ĂĂĄĂł Ă´Ă¨ĂĽ ĂĂŹĂľĂĽĂĂŻĂ˛Ă´ĂĽĂ˛ Ă˛ĂľĂŽĂŽĂŠĂŽĂ§ ĂŻĂŽ Ă´Ă¨ĂĽ Ă¨ĂŻĂłĂ´ ĂŁĂŻĂĂ°ĂľĂ´ĂĽĂ˛Âż
ÇŞ ĂĂł ĂŠĂ´ ĂŁĂŻĂŽĂŽĂĽĂŁĂ´ĂĽĂ¤ Ă´ĂŻ Ă´Ă¨ĂĽ ĂŻĂ´Ă¨ĂĽĂ˛ Ă˛ĂĽĂĂŻĂ´ĂĽ Ă¤ĂĽĂśĂŠĂŁĂĽ Ă´Ă¨ĂĄĂŽ Ă´Ă¨ĂĽ Ă´ĂĄĂ˛Ă§ĂĽĂ´ĂĽĂ¤ Ă˛ĂĽĂĂŻĂ´ĂĽ Ă¤ĂĽĂśĂŠĂŁĂĽÂż
ÇŞ ĂĂł Ă´Ă¨ĂĽ ĂłĂĽĂ´ĂľĂ° ĂŻĂŚ Ă´Ă¨ĂĽ Ă˛ĂĽĂĂŻĂ´ĂĽ Ă¤ĂĽĂśĂŠĂŁĂĽ ĂĄĂŽĂ¤ Ă´Ă¨ĂĽ ĂłĂĽĂŁĂľĂ˛ĂŠĂ´Ăš ĂŠĂ¤ĂĽĂŽĂ´ĂŠĂŁĂĄĂŹÂż
ÇŞ ĂĂĄĂł Ă´Ă¨ĂĽ Ă´ĂĽĂ˛ĂĂŠĂŽĂĄĂŹ ĂĂ ĂĄĂŽĂ¤ ĂĂĽĂĂŻĂ´ĂĽ Ă¤ĂĽĂśĂŠĂŁĂĽ Ă˘ĂĽĂĽĂŽ ĂłĂĽĂ´ĂľĂ° ĂŁĂŻĂ˛Ă˛ĂĽĂŁĂ´ĂŹĂšÂż
ĂÂş Ă ĂˇĂĄĂŽĂ´ Ă´ĂŻ Ă°ĂĽĂ˛ĂŚĂŻĂ˛Ă Ă´Ă¨ĂĽ ĂłĂĽĂ´ĂľĂ° ĂŻĂŚ Ă´Ă¨ĂĽ Ă´ĂĽĂ˛ĂĂŠĂŽĂĄĂŹ ĂĂ ĂĄĂ¤Ă¤Ă˛ĂĽĂłĂł ĂĽĂ´ĂŁÂŽ ĂĄĂ´
ĂĄ Ă´ĂŠĂĂĽ ĂŚĂ˛ĂŻĂ ĂĄ ĂŁĂŻĂĂ°ĂľĂ´ĂĽĂ˛ÂŽ
Automatic setup of a terminal can be performed by using the DHCP server function of the "
WebGlider-X "
ĂÂş ĂĂ´ĂĄĂ˛Ă´ĂŠĂŽĂ§ ĂĄĂŽ ĂĄĂ°Ă°ĂŹĂŠĂŁĂĄĂ´ĂŠĂŻĂŽ ĂŻĂ˛ Ă´Ă˛ĂĄĂŽĂłĂĂŠĂłĂłĂŠĂŻĂŽÂŻĂ˛ĂĽĂŁĂĽĂ°Ă´ĂŠĂŻĂŽ ĂŻĂŚ ĂĄ ĂŚĂŠĂŹĂĽ
ĂŁĂĄĂŽĂŽĂŻĂ´ Ă˘ĂĽ Ă°ĂĽĂ˛ĂŚĂŻĂ˛ĂĂĽĂ¤ÂŽ
When the voltage level of the battery pack is low, the XIT-100-BW is unable to handle some functions.
Is the battery pack charged? ----(P.3-74)
ĂÂş Ă ĂłĂľĂłĂ°ĂĽĂŁĂ´ Ă´Ă¨ĂĄĂ´ Ă´Ă¨ĂĽ ĂŚĂŠĂŹĂĽ ĂŠĂł ĂŁĂŻĂ˛Ă˛ĂľĂ°Ă´ÂŽ
Either delete the file, or transmit the file to the host computer to recover the data. ----(P.3-50ČĄ3-53)
ĂÂş Â˘ĂĂšĂłĂ´ĂĽĂ ĂĂ˛Ă˛ĂŻĂ˛Â˘ ĂˇĂĄĂł Ă¤ĂŠĂłĂ°ĂŹĂĄĂšĂĽĂ¤ ĂĄĂŽĂ¤ ĂĄĂŚĂ´ĂĽĂ˛ Ă°Ă˛ĂĽĂłĂłĂŠĂŽĂ§ ĂĄ ĂŤĂĽĂšÂŹ Ă´Ă¨ĂĽ
Ă°ĂŻĂˇĂĽĂ˛ Ă´ĂľĂ˛ĂŽĂĽĂ¤ ĂĂĂÂŽ
This is displayed when a system program is not able to specify the cause of an error. Possible causes
include failures in hardware, system program or application, external factors like strong static eleckey
tricity, and user errors. If a system error message is displayed, the power will be shut off if
is pressed. At the next startup, XIT-100-BW tries to restore as much as possible.
Please turn ON the power again.
4-6ÄĄ
ĂĂ°Ă°ĂĽĂŽĂ¤ĂŠĂ¸ÂŽ Ă
Âľ
ÄĄ
ĂĂšĂłĂ´ĂĽĂ ĂĂĽĂŽĂľ ĂĂĄĂŁĂ´ĂŻĂ˛Ăš ĂĂĽĂ´Ă´ĂŠĂŽĂ§Ăł ĂĂŠĂłĂ´
Appendix A System menu Factory Settings
ĂĂ°Ă°ĂĽĂŽĂ¤ĂŠĂ¸ÂŽ ĂÂÂą ĂĂšĂłĂ´ĂĽĂ ĂĂĽĂŽĂľ ĂĂĄĂŁĂ´ĂŻĂ˛Ăš ĂĂĽĂ´Ă´ĂŠĂŽĂ§Ăł
ĂĂĄĂ˛ĂĄĂĂĽĂ´ĂĽĂ˛Ăł
ĂĂŻĂłĂłĂŠĂ˘ĂŹĂĽ ĂĂĽĂ´Ă´ĂŠĂŽĂ§ ĂĂĄĂŽĂ§ĂĽ
ĂĂĄĂŁĂ´ĂŻĂ˛Ăš ĂĂĽĂ´Ă´ĂŠĂŽĂ§Ăł
Auto execute
System menu or application
System menu
Resume
Enable, Disable
Disable
Password
Alphanumeric characters from 4 to 30, Upper-case character/Lower-case character are distinguished.
Auto wake up
Specify any among âMonthâ, âWeekâ, and âDayâ
Auto power off
0000, or 0060 to 3600(seconds)
SSID
Alphanumeric characters up to 32, Upper-case XIT
character/Lower-case character are distinguished.
Roaming level
Slow, Normal, Fast
Normal
Doze mode
Quick, 1 second, None
1 second
Encryption Method
Disabled, WEP(40Bit), WEP(128Bit), TKIP, Disabled
TKIP+WEP128bit, TKIP+WEP40bit
WEP Tx keyID
0600 (seconds)
KEY-1, KEY-2, KEY-3, KEY-4
KEY-1
WEP key setting
Setting the contents of each WEP key (1, 2, 3, 4).
Characters which can be used are "0" - "9", "A" "F" and "a" - "f." When a 40 bits is Selected for
"WEP," the WEP is a fixed 10 characters. When
128 bits is selected, it is a fixed 26 characters.
PSK-TKIP
In ASCII characters, input the characters from 8
to 63. By 16 digit number, input up to 64 characters.
Authentication Method
Open, Shared, EAP
Open
EAP mode
EAP-TLS, EAP-PEAP-MSCHAPv2
EAP-TLS
CA root Certificate
Select a file
Client Certificate
Select a file
Private key (File)
Select a file
Private key (Password)
Alphanumeric characters up to 31, Upper-case
character/Lower-case character are distinguished.
WLAN authentication user
name
Alphanumeric characters up to 62, Upper-case
character/Lower-case character are distinguished.
WLAN authentication Password
Alphanumeric characters up to 31, Upper-case
character/Lower-case character are distinguished.
At starting up authentication
Time out
15 to 120
60 seconds
Attention
Display, Not Display
Display
Rate control
Auto, 1Mbps, 2Mbps,
5.5Mbps, 11Mbps
RTS_Threshold
0000 to 2347
A-2ÄĄ
1Mbps
or
2Mbps, Auto
2347(bytes)
Appendix. A-1 System menu Factory Settings
ĂĂĄĂ˛ĂĄĂĂĽĂ´ĂĽĂ˛Ăł
ĂĂŻĂłĂłĂŠĂ˘ĂŹĂĽ ĂĂĽĂ´Ă´ĂŠĂŽĂ§ ĂĂĄĂŽĂ§ĂĽ
ĂĂĄĂŁĂ´ĂŻĂ˛Ăš ĂĂĽĂ´Ă´ĂŠĂŽĂ§Ăł
IP address
Any value of IP addressÄĄ style
000.000.000.000
NetMask
Any value of IP addressÄĄ style
000.000.000.000
Gateway
Any value of IP addressÄĄ style
000.000.000.000
MTU
0064 to 1500
1500(octets)
DHCP Startup type
Disabled, Application boot, System menu boot
Disabled
DHCP Update protect
IP address, NetMask, Gateway, ID (The plural Not selected
can be selected)
DHCP Server port
00001 to 65534
08067
FTP Server address Method
Address, Name
Address
FTP Address
Any value of IP addressÄĄ style
000.000.000.000
FTP Name
Alphanumeric and symbol characters up to 62,
Upper-case character/Lower-case character are
distinguished.
FTP User name
Alphanumeric and symbol characters up to 18,
Upper-case character/Lower-case character are
distinguished.
FTP Password
Alphanumeric and symbol characters up to 20,
Upper-case character/Lower-case character are
distinguished.
FTP Server port
00001 to 65534
00021
FTP Mode
Passive, Active
Passive
FTP Current folder
/(Root), /(User name), /(Specified)
/(Root)
FTP Specified folder
Alphanumeric characters up to 62, Upper-case
/Lower-case distinguished
DNS Primary
Any value of IP addressÄĄ style
000.000.000.000
DNS Secondary
Any value of IP addressÄĄ style
000.000.000.000
DNS Server port
00001 to 65534
00053
DNS Time out time
01 to 99
03(seconds)
DNS Trial count
0 to 9
Cache time
0000 to 9999
0003(min)
SNMP Community(R/Only)
Community name
Alphanumeric characters up to 16, Upper-case public
/Lower-case distinguished
SNMP Community(R/Only)
Manager IP address
Any value of IP addressÄĄ style
000.000.000.000
SNMP Community(R/W) Com- Alphanumeric characters up to 16, Upper-case private
munity name
/Lower-case distinguished
SNMP Community(R/W) Man- Any value of IP address style
ager IP address
000.000.000.000
SNMP Trap Community name
Alphanumeric characters up to 16, Upper-case Welcat
/Lower-case distinguished
SNMP Trap Manager IP address
Any value of IP addressÄĄ style
000.000.000.000
A-3ÄĄ
Appendix A System menu Factory Settings
ĂĂĄĂ˛ĂĄĂĂĽĂ´ĂĽĂ˛Ăł
ĂĂŻĂłĂłĂŠĂ˘ĂŹĂĽ ĂĂĽĂ´Ă´ĂŠĂŽĂ§ ĂĂĄĂŽĂ§ĂĽ
ĂĂĄĂŁĂ´ĂŻĂ˛Ăš ĂĂĽĂ´Ă´ĂŠĂŽĂ§Ăł
SNMP Authentication Trap
Send, Not send
Not send
SNMP Agent port
00001 to 65534
00161
SNMP Trapport
00001 to 65534
00162
ID
000 to 999
000
Barcode Trigger operation
Normal, Double, Release, Auto
Normal
Barcode Power saving
Full, Quick, None
Full
Barcode Irradiation time
00 to 60
20 (seconds)
Barcode Decode level
Loose, Normal, Strict
Normal
Key repeat delay
0000 or, from 0100 to 1000
0500(milliseconds)
Key repeat rate
0000 or, from 0100 to 1000
0100(milliseconds)
Bluetooth local device Device
name
Alphanumeric and symbol characters up to 30, XIT-100
Upper-case /Lower-case distinguished
Bluetooth local device Pairing
Enable, Disable
Bluetooth local device PIN
code
16 digit characters (0 to 9, A to F) up to 16
Disable
Bluetooth Remote device 1 to 7 Alphanumeric and symbol characters up to 30, No name
device name
Upper-case /Lower-case distinguished
Bluetooth Remote device 1 to 7 16 digit characters (0 to 9, A to F) up to 12
BD address
00:00:00:00:00:00
Bluetooth Remote device 1 to 7 Enable, Disable
Pairing
Disable
Bluetooth Remote device 1 to 7 16 digit characters (0 to 9, A to F) up to 16
PIN code
Bluetooth Remote device searchoption
1 to 9
Display contrast
Level 1 to 8
Level 4
Backlight Luminosity
High, Low
High
Volume
Level 1 to 8
Level 8
Click Sound
None, Beep, Beep + Audio, Audio
None
A-4ÄĄ
ĂĂ°Ă°ĂĽĂŽĂ¤ĂŠĂ¸ÂŽ Ă
Âś
ÄĄ
ĂĂĄĂĂ°ĂŹĂĽ ĂĂĄĂ˛ĂŁĂŻĂ¤ĂĽ
Appendix. B Sample Barcode
ĂĂ°Ă°ĂĽĂŽĂ¤ĂŠĂ¸ÂŽ ĂÂÂą ĂĂĄĂĂ°ĂŹĂĽ ĂĂĄĂ˛ĂŁĂŻĂ¤ĂĽ
ÇŞĂĂĂÂąÂł

ÇŞĂĂĂÂ¸

ÇŞĂĂĂÂĂ

ÇŞĂĂĂĂÂłÂšÂ¨ĂÂŻĂÂŠ
(
# $ % & ' *
(notes) It is not likely to be able to read because of low printing quality (Expansion, Reduction, Dirt, etc.).
B-2
Appendix. B-1 Sample Barcode
ÇŞĂĂĂĂÂłÂšÂ¨ĂĂŻ ĂÂŻĂÂŠ

# $ % & ' (
CC
DD
ÇŞĂĂÂÂˇÂ¨ĂÂŻĂÂŠ
ÇŞĂĂÂÂˇÂ¨ĂĂŻ ĂÂŻĂÂŠ
E E
F
F
ăŞ¸ăŠˇăŞăŠˇăŞăŠˇăŞăŠˇăŞăŠˇăŞăŠˇăŞăŠˇăŞ¸
ăŞšăŠˇăŞăŠˇăŞăŠˇăŞăŠˇăŞăŠˇăŞăŠˇăŞăŠˇăŞš
ÇŞĂĂÂÂˇÂ¨ĂĂĂÂŠ
(notes) It is not likely to be able to read because of low printing quality (Expansion, Reduction, Dirt, etc.).
B-3ÄĄ
Appendix. B Sample Barcode
ÇŞĂĂĂÂ¨ĂÂŻĂÂŠ

ÇŞĂĂĂÂ¨ĂĂŻ ĂÂŻĂÂŠ
ÇŞĂĂĂÂ¨ĂĂ´ĂĄĂŽĂ¤ĂĄĂ˛Ă¤ ĂĂĂÂÂąÂ´ÂŠ

ÇŞĂĂĂÂ¨ĂĂ¸Ă´ĂĽĂŽĂ¤ĂĽĂ¤ ĂĂĂÂÂąÂśÂŠ

(notes) It is not likely to be able to read because of low printing quality (Expansion, Reduction, Dirt, etc.).
B-4
Appendix. B-1 Sample Barcode
ÇŞĂĂĂÂ¨ĂĂ¤Ă¤ ĂŻĂŽ ĂśĂĽĂ˛ĂłĂŠĂŻĂŽ ĂĂĂÂÂśÂŠ

ÇŞĂĂĂĂÂąÂ˛Â¸Â¨ĂĂŻĂ¤ĂĽ ĂłĂĽĂ´ ĂÂŠ
ÇŞĂĂĂĂÂąÂ˛Â¸Â¨ĂĂŻĂ¤ĂĽ ĂłĂĽĂ´ ĂÂŠ

ÇŞĂĂĂĂÂąÂ˛Â¸Â¨ĂĂŻĂ¤ĂĽ ĂłĂĽĂ´ ĂÂŠ

(notes) It is not likely to be able to read because of low printing quality (Expansion, Reduction, Dirt, etc.).
B-5ÄĄ
Appendix. B Sample Barcode
ÇŞĂĂĂÂąÂ˛Â¸Â¨ĂĂŻĂ¤ĂĽ ĂłĂĽĂ´ ĂÂŠ

ÇŞĂĂĂÂąÂ˛Â¸Â¨ĂĂŻĂ¤ĂĽ ĂłĂĽĂ´ ĂÂŠ

(notes) It is not likely to be able to read because of low printing quality (Expansion, Reduction, Dirt, etc.).
B-6
Âˇ
ÄĄ
ĂĂŽĂ¤ĂĽĂ¸
Index
ĂĂŽĂ¤ĂĽĂ¸
á´ž
Access point ................................................. xiv, 1-7
Access point search........................................... 3-85
Active mode ...................................................... 3-38
Ad-hoc mode....................................................... 1-7
Advanced (FTP)................................................ 3-37
Advanced (SNMP)............................................ 3-42
Advanced(WLAN Security).............................. 3-31
Advanced(WLAN)............................................ 3-31
ALARM LED ..................................................... 1-2
AP search .......................................................... 3-85
Application program ........................................... 2-2
At starting up authentication Time out (Factory
settings).......................................................... A-2
Attention ........................................................... 3-31
Attention (Factory settings) ............................... A-2
Authentication Method ..................................... 3-28
Authentication Method (Factory settings).......... A-2
Auto execute ..................................................... 3-15
Auto execute (Factory settings) ......................... A-2
Auto power off .................................................. 3-21
Auto power off (Factory settings) ...................... A-2
Auto wake up .................................................... 3-20
Schedule clear ............................................. 3-21
Schedule confirmation................................. 3-20
Schedule setting........................................... 3-20
Auto wake up (Factory settings) ........................ A-2
Auto-power-off function ..................................... 4-2
á´ż
Back space key.................................................... 1-3
Backlight Luminosity........................................ 3-68
Backlight Luminosity (Factory settings)............ A-4
Backup battery .................................. xiv, 1-20, 1-21
Barcode ............................................................. 3-56
Barcode Decode level (Factory settings) ........... A-4
Barcode Irradiation time (Factory settings) ....... A-4
Barcode Power saving (Factory settings)........... A-4
Barcode Trigger operation (Factory settings)..... A-4
Barcode window ................................................. 1-2
Battery Alert........................................................ 3-8
Battery cover....................................................... 1-3
Battery cover lock lever ...................................... 1-3
Battery for Backup ............................................ 1-23
Battery level ...............................................3-8, 3-74
Battery pack ......................... xiv, 1-3, 1-4, 1-16, 4-2
charging....................................................... 1-18
Installing...................................................... 1-21
Removing .................................................... 1-20
Replacing..................................................... 1-21
Worn out ...................................................... 1-21
BluePorter .................................................... xiv, 1-5
I-2
Bluetooth local device Device name (Factory
settings).......................................................... A-4
Bluetooth local device Pairing (Factory settings)
....................................................................... A-4
Bluetooth local device PIN code (Factory settings)
....................................................................... A-4
Bluetooth Remote device 1 to 7 BD address
(Factory settings) ........................................... A-4
Bluetooth Remote device 1 to 7 device name
(Factory settings) ........................................... A-4
Bluetooth Remote device 1 to 7 Pairing (Factory
settings).......................................................... A-4
Bluetooth Remote device 1 to 7 PIN code (Factory
settings).......................................................... A-4
Bluetooth Remote device searchoption (Factory
settings).......................................................... A-4
Broken file ........................................................ 3-53
áľ
CA root certificate............................................. 3-29
CA root Certificate (Factory settings) ................ A-2
Cache time (Factory settings) ............................ A-3
Cancellation key ................................................. 1-2
Certificate file ................................................... 3-29
Charger.............................................................. 1-16
Charging.....................................................1-16, 4-2
Battery pack ................................................ 1-17
Charging Error .................................................. 1-18
Charging jack ...................................................... 1-3
Charging specification ...................................... 1-16
Click Sound (Factory settings)........................... A-4
Client Certificate............................................... 3-29
Client Certificate (Factory settings) ................... A-2
Clock................................................................. 3-16
current time ................................................. 3-16
Manual setting............................................. 3-16
Server setting............................................... 3-16
Clone................................................................. 3-77
CODE128(Code set A) (Sample Barcode)......... B-5
CODE128(Code set B) (Sample Barcode)......... B-5
CODE128(Code set C) (Sample Barcode)......... B-5
CODE39 (C/D) (Sample Barcode) .................... B-2
CODE39 (No C/D) (Sample Barcode)............... B-3
Common key..................................................... 3-25
Community(R/Only) ......................................... 3-40
Community(R/W) ............................................. 3-41
Contrast............................................................. 3-68
Current time ...................................................... 3-16
Index
áľ
Data communication Method
Bluetooth communications............................ 1-9
WLAN communications................................ 1-8
Data communication/preparation of
Bluetooth communication ............................. 1-8
WLAN communication ................................. 1-7
Data storage ...............................................1-22, 2-2
Dead Zone......................................................... 1-14
Decode level...................................................... 3-59
Dedicated charger ............................................. 1-16
Default device ..................................................... xiv
Default gateway .............................................. ÂłÂÂłÂ´
Device Registry................................................... 3-2
DHCP................................................................ 3-34
DHCP client function........................................ 3-34
DHCP Execute .................................................. 3-35
DHCP Request .................................................... 3-9
DHCP Server port (Factory settings) ................. A-3
DHCP Startup type (Factory settings)................ A-3
DHCP Update protect (Factory settings)............ A-3
Direction key..................................................... 3-61
Display contrast (Factory settings)..................... A-4
Display of ALARM LED (during wireless
communications)........................................... 1-12
Display of SCAN LED (during terminal charging)
...................................................................... 1-12
DNS .................................................................. 3-39
DNS Primary (Factory settings)......................... A-3
DNS Secondary (Factory settings)..................... A-3
DNS Server port (Factory settings).................... A-3
DNS Time out time (Factory settings) ............... A-3
DNS Trial count (Factory settings) .................... A-3
Doze mode ........................................................ 3-23
Doze mode (Factory settings) ............................ A-2
Drive ................................................................. 3-80
áľ
EAN128(Code set A) (Sample Barcode) ........... B-6
EAN128(Code set B) (Sample Barcode) ........... B-6
EAN128(Code set C) (Sample Barcode) ........... B-6
EAP mode (Factory settings) ............................. A-2
EAP setting ....................................................... 3-28
EAP-PEAP-MSCHAPv2 .................................. 3-29
EAP-TLS .......................................................... 3-29
Electrodes /cleaning .......................................... 1-21
Encryption......................................................... 3-24
Encryption Method ........................................... 3-24
Encryption Method (Factory settings)................ A-2
Enter key ............................................................. 1-2
Extension ...................................................2-3, 3-47
áľ
F drive ................................................. xiv, 1-22, 2-2
F10 key ............................................................... 1-2
F9 key ................................................................. 1-2
File name ............................................................ 2-3
File receiving .................................................... 3-44
Folder................................................................ 3-38
FTP ................................................................... 3-36
FTP Address (Factory settings).......................... A-3
FTP Current folder (Factory settings) ................ A-3
FTP Mode (Factory settings) ............................. A-3
FTP Name (Factory settings) ............................. A-3
FTP Password (Factory settings) ....................... A-3
FTP Server address Method (Factory settings) .. A-3
FTP Server port (Factory settings) ..................... A-3
FTP Specified folder (Factory settings) ............. A-3
FTP User name (Factory settings)...................... A-3
Function keys...................................................... 1-2
áľ
Gateway .......................................................... ÂłÂÂłÂ´
Gateway (Factory settings) ................................ A-3
áľ
Hand strap ........................................................... 1-3
Handy5250...................................................1-5, 2-2
Hardware device ............................................... 3-56
Hardware device testing.................................... 3-82
HBC-51...................................................... xiv, 1-20
Host name ......................................................... 3-36
áľ
ID ...................................................................... 3-55
ID (Factory settings) .......................................... A-4
Inclination of a Barcode.................................... 1-14
Indicator............................................................ 3-69
Indicator function.............................................. 3-69
Infrastructure mode............................................. 1-7
Initialize ............................................................ 3-75
IP address ........................................................ ÂłÂÂłÂ´
IP address (Factory settings) .............................. A-3
ITF (C/D) (Sample Barcode) ............................. B-4
ITF (No C/D) (Sample Barcode) ....................... B-4
ITF(Add on version ITF-6) (Sample Barcode) .. B-5
ITF(Extended ITF-16) (Sample Barcode).......... B-4
ITF(Standard ITF-14) (Sample Barcode)........... B-4
áľ
JAN13 (Sample Barcode) .................................. B-2
JAN8 (Sample Barcode) .................................... B-2
áľ
Key...................................................................... 3-3
Key Character assigns......................................... 3-4
Key Click Sound............................................... 3-73
Key repeat delay (Factory settings) ................... A-4
I-3ÄĄ
Index
Key repeat rate (Factory settings) ...................... A-4
KEY setting..................................................... ÂłÂÂ˛Âľ
áľ
Laser light irradiation angle .............................. 1-13
LCD .................................................................... 1-2
Local device ............................................... xiv, 3-62
Luminosity ........................................................ 3-68
áľ
MAC address .................................................... 3-32
Manual setting(Clock)....................................... 3-16
Margin............................................................... 1-15
Memory Back Up
Backup battery............................................. 1-23
Battery pack................................................. 1-22
MTU................................................................ ÂłÂÂłÂ´
MTU (Factory settings)...................................... A-3
Multi Charger...........................................1-16, 1-18
áľ
NetMask.......................................................... ÂłÂÂłÂ´
NetMask (Factory settings) ................................ A-3
Network setting................................................. 3-33
NW-7 (C/D) (Sample Barcode).......................... B-3
NW-7 (HEX) (Sample Barcode) ........................ B-3
NW-7 (No C/D) (Sample Barcode).................... B-3
áľ
Open authentication .......................................... 3-28
OS version......................................................... 3-75
áľ
Passive mode..................................................... 3-38
Password ........................................................... 3-18
Clear ............................................................ 3-19
Setting ......................................................... 3-19
Password (Factory settings) ............................... A-2
Password (FTP)................................................. 3-37
Pitch .................................................................. 1-14
Power Switch ...................................................... 1-2
Private key ........................................................ 3-30
Private key (File) (Factory settings)................... A-2
Private key (Password) (Factory settings).......... A-2
Product plate ....................................................... 1-3
Product specifications ....................................... 1-10
Prolonged storage.............................................. 3-81
Battery ......................................................... 1-24
Terminal ...................................................... 1-24
PSK-TKIP ......................................................... 3-26
PSK-TKIP (Factory settings) ............................. A-2
I-4
áľ
QC-001 ............................................................. 1-16
QC-002 ....................................................1-16, 1-18
áľ
Rate control....................................................... 3-32
Rate control (Factory settings)........................... A-2
Readable angle.................................................. 1-14
Receive Method ................................................ 3-45
Receiving .......................................................... 3-44
Registry............................................................... 3-2
Remote device............................................ xiv, 3-64
Resume ............................................................. 3-17
Disabled....................................................... 3-18
Enabled........................................................ 3-17
Fail .............................................................. 3-17
Resume (Factory settings).................................. A-2
Resume function ............................................... 1-25
Reverse Barcode ............................................... 3-60
Roaming level ................................................... 3-23
Roaming level (Factory settings) ....................... A-2
RTS Threshold .................................................. 3-32
RTS Threshold (Factory settings) ...................... A-2
áľ
S drive................................................. xiv, 1-22, 2-2
Scan depth......................................................... 1-13
Scan key....................................................... xiv, 1-2
SCAN LED .......................................1-2, 1-12, 1-16
Scanning angle.................................................. 3-60
Scanning Specifications .................................... 1-13
Screen ........................................................3-68, 4-2
Screen output characters
double-byte characters................................. 1-26
single-byte characters.................................. 1-27
Security (WLAN) ............................................. 3-24
Security Registry................................................. 3-2
Serial number seal............................................... 1-3
Server address ................................................... 3-36
Server port (DHCP) .......................................... 3-35
Server port (FTP) .............................................. 3-38
Server setting(Clock) ........................................ 3-16
Setting Wizard................................................... 3-10
Shared key authentication ................................. 3-28
Shift key.............................................................. 1-3
Single Charger .................................................. 1-16
Skew ................................................................. 1-14
SNMP ......................................................3-40, 3-42
SNMP Agent port (Factory settings).................. A-4
SNMP Authentication Trap (Factory settings) ... A-4
SNMP Community(R/Only) Community name
(Factory settings) ........................................... A-3
SNMP Community(R/Only) Manager IP address
(Factory settings) ........................................... A-3
SNMP Community(R/W) Community name
(Factory settings) ........................................... A-3
Index
SNMP Community(R/W) Manager IP address
(Factory settings) ........................................... A-3
SNMP Trap Community name (Factory settings)
....................................................................... A-3
SNMP Trap Manager IP address (Factory settings)
....................................................................... A-3
SNMP Trapport (Factory settings) ..................... A-4
Software .............................................................. 2-2
Sound .......................................................3-56, 3-69
Sound volume ................................................... 3-69
Speaker................................................................ 1-3
Specular reflection ............................................ 1-14
SSID.................................................................. 3-22
SSID (Factory settings)...................................... A-2
Startup type ....................................................... 3-35
Subnet mask .................................................... ÂłÂÂłÂ´
Supported audio file .......................................... 3-47
Supported bitmap file........................................ 3-47
System menu.......................... xiv, 2-2, 2-4, 3-2, 4-3
Standard Operation........................................ 3-5
Startup ........................................................... 3-9
System menu factory settings............................. A-2
System menu List.............................................. 3-13
System program ........................................... xiv, 2-2
System Registry .................................................. 3-2
System version .................................................. 3-75
áľ
TCP/IP .............................................................. 3-33
Temporary file..................................................... 2-3
Terminal .............................................................. xiv
Test (Barcode) ................................................... 3-87
Test (Bluetooth)................................................. 3-86
Test (Display).................................................... 3-89
Test (Indicator).................................................. 3-90
Test (Key).......................................................... 3-90
Test (WLAN) .................................................... 3-82
Tilt..................................................................... 1-15
Trap ................................................................... 3-43
Trap setup.......................................................... 3-41
Trigger mode..................................................... 3-57
TxKey_ID ....................................................... ÂłÂÂ˛Âľ
áľ
Unfilled space ................................................... 1-15
Unique Registry .................................................. 3-2
UPC-E (Sample Barcode) .................................. B-2
Update protect................................................... 3-35
User name ......................................................... 3-37
User Registry ...................................................... 3-2
áľ
Vibrator ............................................................. 3-69
Volume .............................................................. 3-69
Volume (Factory settings) .................................. A-4
áľ
WebGlider-X......................................... xiv, 1-5, 2-2
WebGlider-X browser ......................................... xiv
Welcat Enterprise MIB...................................... 3-42
Well known port (DHCP) ................................. 3-35
Well known port(FTP) ...................................... 3-38
WEP.................................................................. 3-25
WEP key ........................................................... 3-25
WEP key setting (Factory settings).................... A-2
WEP Tx keyID (Factory settings)...................... A-2
Wireless function ................................................ 1-6
Wireless LAN ................................................... 3-22
Wizard......................................................3-10, 3-81
WLAN ................................................ xiv, 1-7, 3-22
WLAN authentication Password (Factory settings)
....................................................................... A-2
WLAN authentication user name (Factory settings)
....................................................................... A-2
WLAN/ping testing........................................... 3-84
áľ
XIT-100-BW's Software ..................................... 2-2
I-5ÄĄ

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2005:12:14 16:34:46-08:00
Modify Date                     : 2005:12:14 16:34:46-08:00
Page Count                      : 82
Creation Date                   : 2005:12:15 00:34:46Z
Mod Date                        : 2005:12:15 00:34:46Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : 12871
Metadata Date                   : 2005:12:15 00:34:46Z
Creator                         : 12871
Title                           : Users Manual.pdf

EXIF Metadata provided by EXIF.tools

Welcat XIT100BW Barcode Reader with 802.11b&Bluetooth; Transmitters User Manual

Welcat, Inc. Barcode Reader with 802.11b&Bluetooth; Transmitters Users Manual

Contents

User Manual 2 of 2

FCC ID Filing: Q98XIT100BW

Navigation menu

Namespaces

Views

Navigation