Welch Allyn WAM2500 Wireless Acquisition Module User Manual 4 Section 3

Mortara Instrument Inc Wireless Acquisition Module 4 Section 3

4 Section 3 Manual

Download: Welch Allyn WAM2500 Wireless Acquisition Module User Manual 4 Section 3
Mirror Download [FCC.gov]Welch Allyn WAM2500 Wireless Acquisition Module User Manual 4 Section 3
Document ID1127691
Application ID38oqsja8BhPtvycYgrr8SQ==
Document Description4 Section 3 Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize8.17kB (102111 bits)
Date Submitted2009-06-22 00:00:00
Date Available2009-06-23 00:00:00
Creation Date2009-04-01 19:53:43
Producing SoftwarePDF Complete version 3.0.31.1
Document Lastmod0000-00-00 00:00:00
Document TitleMicrosoft Word - 4-Section 3.doc

MAINTENANCE
SECTION 3
Cleaning the WAM Transmitter and ECG Cable
1.
Remove cables and remove the power source from device before cleaning.
2.
For general cleaning, use a soft, lint-free cloth lightly moistened with a mild soap and water solution. Wipe
and air dry.
3.
For disinfecting, wipe exterior with a soft, lint-free cloth using a solution of Sodium Hypochlorite (10%
household bleach and water solution) minimum 1:500 dilution (minimum 100 ppm free chlorine) and
maximum 1:10 dilution as recommended by the APIC Guidelines for Selection and Use of Disinfectants.
Alternatively, the following disinfectant wipes may be used:
Manufacturer: PDI
Part: SANI-CLOTHÂŽ HB
Order No.: Q85484
4.
Use caution with excess liquid as contact with metal parts may cause corrosion.
5.
Do not immerse cable ends or lead wires; immersion can cause metal corrosion.
6.
Do not use excessive drying techniques such as forced heat.
WARNING: Prevent liquid from penetrating the device and do not attempt to clean/disinfect the device or
patient cables by submerging into a liquid, autoclaving, or steam cleaning. Never expose cables to strong
ultra-violet radiation. Do not sterilize the device or ECG cable with Ethylene Oxide (EtO) gas.
Periodic Maintenance
Check the WAM, and the lead wires before each use to ensure they are not damaged or broken.
Disposal of Waste Materials
The WAM uses one AA battery and disposable monitoring electrodes. Disposal must be in accordance with the
following procedures:
Battery: applicable disposal or recycling standards
Electrodes: normal waste
19

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Create Date                     : 2009:04:01 19:53:43
Modify Date                     : 0000:01:01 00:00:00
Producer                        : PDF Complete version 3.0.31.1
Title                           : Microsoft Word - 4-Section 3.doc
Page Count                      : 1
PDF Version                     : 1.4
EXIF Metadata provided by EXIF.tools
FCC ID Filing: HJR-WAM2500

Navigation menu