Welland Technology WLD-1 Digital bluetooth body fat scale User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4065324
Application ID	Pc+Jlv1C2auNVOjhGHy+Wg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	229.54kB (2869270 bits)
Date Submitted	2018-11-08 00:00:00
Date Available	2018-11-08 00:00:00
Creation Date	2018-08-30 13:17:01
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-11-08 09:03:58
Document Title	Users Manual
Document Creator	Adobe InDesign CC 13.1 (Macintosh)

Digital bluetooth body
fat scale
Model No.: FG830LB
Questions or Concerns? support@etekcity.com
Thank You.
Thank you for purchasing the FG830LB Digital bluetooth body
fat scale by Etekcity. We are dedicated to providing our
customers with quality products for building a better living.
Should you have any questions or concerns about using your
new product, feel free to reach out to our helpful Customer
Support Team at (855) 686-3835 or by email at
support@etekcity.com. We hope you enjoy your new
product!
Package Contents
Table of Contents
1 x Digital bluetooth body fat scale
3 x 1.5V AAA Batteries (Pre-Installed)
1 x User Manual
Package Contents
Specifications
Safety Information
Function Diagram
Setup
App Setup
Using Digital bluetooth body fat scale
• Weighing without the VeSync App
• Weighing with the VeSync App
Using the App
• Weight Measurements
—— Add or Switch Users
—— More Data
—— Data Graphs
—— Device Settings
Maintenance
• Cleaning the Scale
• Calibrating the Scale
• Replacing the Batteries
Display Messages
Troubleshooting
Warranty Information
Customer Support
Specifications
Weight Capacity
400 lb / 28 st / 180 kg
Graduation
0.2 lb (0.1 kg)
Weight Units
lb / st / kg
Platform
Tempered Glass
Dimensions
11.8 x 11.8 x 1.0 in
(300 x 300 x 24 mm)
Battery
3 x 1.5V AAA Batteries
Auto-Off
30 seconds
10
14
16
16
17
18
20
25
25
25
26
27
28
29
30
Safety Information
Please read and follow all instructions and safety guidelines in this manual.
NOTE:
• This scale should not be used to diagnose or treat
any medical condition.
• Scale data should not be used as a substitute for
medical advice from a healthcare professional.
• This scale uses a harmless electrical current to
measure body fat. We do not recommend using
the scale if you use medical electronic equipment
such as a pacemaker. Consult a healthcare
professional before use.
General Use
• Check the scale before using. Do not use the
scale if it is damaged in any way.
• Do not strike or bang on the scale, and do not
use the scale if there is a slight crack on the glass.
Due to the nature of tempered glass, the glass
will shatter if there is a slight crack. If you see a
crack, contact Customer Service (page 30).
• The glass platform is slippery when wet. Always
make sure the platform and your feet are dry
before stepping on for measurement.
• Place the scale on a hard, flat surface to avoid
tipping.
• To weigh safely and accurately, stand with your
feet shoulder-width apart while on the scale. Do
not stand on the edge of the scale or jump on the
scale.
• Avoid standing on the scale for a long period of
time.
• Do not overload the scale. Maximum weight
capacity is 400 lb (180 kg).
• Keep the scale in a cool area with low humidity.
Keep the scale away from heat sources, such as
ovens or heaters. Store the scale horizontally, not
vertically.
• For household use only. This scale is not intended
for commercial use.
• Handle with care.
Batteries
• Do not mix new and used batteries.
• If the scale is not in use for a long period of time,
remove the batteries to extend the lifetime of the
scale.
NOTE: This smart scale complies with Part 15 of the
FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Function Diagram
1. Weighing Platform
2. Display
3. Anti-Skid Padding
4. Battery Compartment
5. Unit Conversion Button
Top
Bottom
Setup
Before First Use
1. Open the battery compartment on the bottom
of the scale. Remove the included AAA batteries
from the scale.
2. Remove the plastic wrap from batteries.
3. Replace the batteries. Follow the guidelines in
the battery compartment to match the + and terminals.
1.5v - AAA
1.5v - AAA
1.5v - AAA
Push down and Lift
App Setup
1. Scan the QR code, or download the VeSync app
from the App Store or Google Play Store.
NOTE: For Android users, choose “Allow” (when
prompted) to use VeSync.
2. After you’ve signed up, enter your email and
password, then tap Log In.
NOTE: You must create your own VeSync account
to use third-party services and products, such as
the Amazon Echo and Google Home. These will not
work with the Guest account. You can also allow your
family or friends to use your smart scale.
Using Digital bluetooth body
fat scale
NOTE: If you are pregnant, some measurements
may not be accurate.
NOTE: Press the unit conversion button on the
bottom of the scale to change units from kilograms
(kg) to pounds (lb) to stone (st).
Weighing without the VeSync App
1. Place the scale on a hard, flat surface.
NOTE: Using the scale on a soft surfaces such as
carpets and mats will result in inaccurate
measurements.
2. Step onto the scale. The scale will automatically
turn on and start measuring your weight.
3. Keep standing on the scale until the digits on the
screen flash 3 times with your final measurement.
Weighing with the VeSync App
Pairing with Scale with VeSync
1. Tap the + button to add your device.
2. Tap Scales.
10
3. Select the Etekcity Fitness Scale.
4. Go to your phone’s settings and turn on your
phone’s Bluetooth®. Tap Connect.
11
5. The app will take a moment to scan for devices.
Tap Etekcity Fitness Scale to connect.
6. If you can’t connect, tap Why couldn’t I connect
to my device? at the bottom of the screen.
12
7. After following the Troubleshooting steps,
tap < to return to the previous screen.
8. Then tap Search Again.
9. You’ve completed setup! Give your smart scale a
unique name, or simply use the default name.
NOTE: You can change the name and picture at any
time in “Device Settings”.
13
Using the App
1. On the “My Home” screen, tap on the name of
your smart scale.
NOTE: New users should enter physical information
to let the scale calculate accurate body metrics.
14
2. Stand on the scale. Your results will display.
Tap to access the following:
A. Add or Switch User (see page 16)
B. More Data (see page 17)
C. Data Graphs (see page 18)
D. Device Settings (see page 20)
NOTE:
• If you’re wearing shoes, or if you haven’t entered
physical information, the results will only show
weight.
15
Weight Measurement
A. Add or Switch Users
Select a user by tapping on the profile picture, or
tap
to add a new user.
NOTE:
• The smart scale can only track up to 8 users. If
you need to add another user, delete an existing
user first.
• You can reset the scale by pressing and holding
the unit button for 10 seconds. This will remove
all users.
• Once user is deleted, there is no way to retrieve
deleted information.
16
B. More Data
This screen shows a comprehensive analysis of 6 health
metrics that the scale tracks. Tap < to return to the
previous screen.
17
C. Data Graphs
1. Tap Data Graphs.
2. You can view daily, weekly, or monthly progress.
Tap
to view your weighing history.
18
3. Tap on any entry to see more information.
NOTE: Swipe left on any entry to delete.
4. View analysis of the 6 health metrics that the
scale tracks.
19
D. Device Settings
On the Device Settings screen, you can customize
the following scale settings:
a. Device Name
b. Icon
c. My Goals (see page 21)
d. Members (see page 22)
e. Weight Unit (see page 24)
f. Delete Device (see page 24)
20
My Goals
1. Tap My Goals to change your Body Fat Goal and
Weight Goal.
2. Scroll the goal meter left and right to change
your goals.
3. Then select
when completed.
21
Members
Add Member
1. Tap Add. Select the new member’s photo and
enter the new member’s information.
2. Tap
to save.
22
Edit Member
1. View and edit user information. Tap on member’s
picture and select each detail to edit information.
2. Tap Save when finished.
3. To delete the user profile, tap
upper right corner.
in the
23
Weight Unit
Delete Device
Tap the toggle button to change the weight units.
Tap Delete Device to delete the scale from your
VeSync app.
NOTE: If you change the weight units, the units on
the smart scale will change to match.
24
NOTE: Once user is deleted, there is no way to
retrieve deleted information.
Maintenance
Cleaning the Scale
• Use a slightly damp cloth to clean the surface of
the scale, followed by a dry, soft cloth to wipe
away the remaining moisture.
• Do not use chemical or abrasive cleaning agents
to clean the scale.
Calibrating the Scale
If the scale has been moved or flipped upside down,
it must be calibrated to ensure accurate results.
1. Place the scale on a hard, flat surface.
2. Step on the scale with one foot until digits appear
on the display. Then, step off.
3. The scale will show “C” while calibrating, then
“0.0” when complete.
25
Replacing the Batteries
The display will show “Lo” when the batteries need
to be replaced.
1. Open the battery compartment on the underside
of the scale.
2. Remove the old batteries and dispose of them
properly.
3. Install 3 new 1.5V AAA batteries. Follow the
guidelines in the battery compartment to match
the + and - terminals.
4. After closing the battery compartment, calibrate
the scale (see Calibrating the Scale, page 25).
26
1.5v - AAA
1.5v - AAA
1.5v - AAA
Display Messages
Wireless Connection
Change Battery
No Wireless Connection
Overload
Calibrating
27
Troubleshooting
1. Why doesn’t the scale turn on?
• Check if the batteries are properly installed. If the
scale is new, make sure to remove plastic wrap from
the batteries.
2. Why does information flash on the screen and then
disappear?
• The batteries are low and may need to be replaced.
3. Why doesn’t the scale connect with the VeSync app?
• Make sure your phone’s operating system is running
on iOS 8.0+ or Android 4.3+.
• Download and open the newest version of the
VeSync app.
• Turn on Bluetooth on your phone (for Android users,
make sure your Location is turned on as well).
• Make sure your scale and phone are within 30 feet
(10 meters) of each other.
• Make sure the scale is not currently connected to
any other phone or app.
• Make sure your phone is not currently connected to
another Bluetooth(™) device.
4. Why is my body fat not measured when weighing in?
• Step on the scale with dry, bare feet. Make sure your
feet are on the scale’s conductive areas.
• Make sure Bluetooth is turned on.
• Enter your physical information into the VeSync
app.
Conductive
Areas
NOTE:
• If the scale has errors on the display, it will not turn off
automatically, or has a problem not listed here, then try
removing the batteries for 3 seconds, then replacing
them.
• To reset the scale, press and hold the unit button for 10
seconds. This will remove all users and their information.
• Once user is deleted, there is no way to retrieve deleted
information.
If you still need help, please contact Customer Support (page 30).
28
Warranty Information
Product
Default Warranty Period
ESF37 Smart Fitness Scale
1 year
For your own reference, we strongly recommend that you record
your order number and date of purchase.
Order Number:
Date of Purchase:
Terms & Policy
Etekcity warrants all products to be of the highest quality in material,
craftsmanship, and service, effective from the date of purchase to
the end of the warranty period.
Etekcity will replace any product found to be defective due to
manufacturer flaws based on eligibility. Refunds are available within
the first 30 days of purchase. Refunds are only available to the
original purchaser of the product. This warranty extends only to
personal use and does not extend to any product that has been used
for commercial, rental, or any other use in which the product is not
intended for. There are no warranties other than the warranties
expressly set forth with each product.
This warranty is non-transferrable. Etekcity is not responsible in any
way for any damages, losses, or inconveniences caused by equipment
failure by user negligence, abuse, or use noncompliant with the user
manual or any additional safety, use, or warnings included in the
product packaging and manual.
This warranty does not apply to the following:
•
•
•
•
Damage due to abuse, accident, alteration, misuse, tampering or
vandalism.
Improper or inadequate maintenance.
Damage in return transit.
Unsupervised use by children under 18 years of age.
Etekcity and its subsidiaries assume no liability for damage caused
by the use of the product other than for its intended use or as
instructed in the user manual. Some states do not allow this exclusion
or limitation of incidental or consequential losses, so the foregoing
disclaimer may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which may vary from state
to state.
ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Additional 1-Year Warranty
You can extend your 1-year warranty by an additional year. Log
onto www.etekcity.com/warranty and enter your order number (for
example, from Amazon or Houzz) to register your new product for the
extended warranty.
If you are unable to provide the order number for your product, please
type a short note in the order number field along with the date you
received your product.
Defective Products & Returns
If your product proves defective within the specified warranty period,
please contact Customer Support via support@etekcity.com with
your order number. Do not dispose of your product before contacting
us. Once Customer Support has approved your request, please return
the unit with a copy of the invoice or your order number.
29
Customer Support
If you encounter any issues or have any questions regarding your new product, please contact our helpful
Customer Support Team. Your satisfaction is our goal!
30
Customer Support
Support Hours
Etekcity Corporation
1202 N Miller St., Suite A
Anaheim, CA 92806
Monday - Friday
9:00 am - 5:00 pm PT
Toll Free: (855) 686-3835
Email: support@etekcity.com
*Please have your order confirmation number ready
before contacting customer support.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Connect with us @Etekcity.
31
Scan here to join the community!
Visit us at www.etekcity.com
Building on better living.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Has XFA                         : No
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Create Date                     : 2018:08:30 13:17:01-07:00
Metadata Date                   : 2018:11:08 09:03:58+08:00
Modify Date                     : 2018:11:08 09:03:58+08:00
Creator Tool                    : Adobe InDesign CC 13.1 (Macintosh)
Thumbnail Width                 : 256
Thumbnail Height                : 172
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 16323 bytes, use -b option to extract)
Instance ID                     : uuid:ff6195f8-d075-44ac-b3a9-32360dfd5cc0
Original Document ID            : xmp.did:8cb94ebb-1810-401a-8f42-d027c4eb6836
Document ID                     : xmp.id:36a29c89-b793-409a-b8a1-0accf6f6235f
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:cbbb1c48-6148-4e97-a045-1aa78d06498c
Derived From Document ID        : xmp.did:1a981d32-e0db-45ac-b054-ff5804934166
Derived From Original Document ID: xmp.did:8cb94ebb-1810-401a-8f42-d027c4eb6836
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.1 (Macintosh)
History Changed                 : /
History When                    : 2018:08:30 13:17:01-07:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 152.400000
Max Page Size H                 : 101.600000
Max Page Size Unit              : Millimeters
Font Name                       : Interstate-Bold, Interstate-Black, Interstate-Light, Interstate-LightItalic
Font Family                     : Interstate, Interstate Black, Interstate Light, Interstate Light
Font Face                       : Bold, Regular, Regular, Italic
Font Type                       : Open Type, Open Type, Open Type, Open Type
Font Version                    : 001.000, 001.000, 001.000, 001.000
Font Composite                  : False, False, False, False
Font File Name                  : Interstate-Bold_4.otf, Interstate-Black_5.otf, Interstate-Light_10.otf, Interstate-LightItalic_15.otf
Plate Names                     : Black, PANTONE 429 C, PANTONE 2144 C
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : PANTONE 2144 C, PANTONE 429 C
Swatch Colorant Type            : SPOT, SPOT
Swatch Colorant Tint            : 100.000000, 100.000000
Swatch Colorant Mode            : CMYK, CMYK
Swatch Colorant Cyan            : 88.999999, 37.000000
Swatch Colorant Magenta         : 61.000001, 27.000001
Swatch Colorant Yellow          : 0.000000, 27.000001
Swatch Colorant Black           : 0.000000, 0.000000
Page Count                      : 33
Creator                         : Adobe InDesign CC 13.1 (Macintosh)

EXIF Metadata provided by EXIF.tools