Whirlpool GI15NDXZS1 W10361742C User Manual ICE MAKER Manuals And Guides 1702134L

User Manual: Whirlpool GI15NDXZS1 GI15NDXZS1 WHIRLPOOL ICE MAKER - Manuals and Guides View the owners manual for your WHIRLPOOL ICE MAKER #GI15NDXZS1. Home:Kitchen Appliance Parts:Whirlpool Parts:Whirlpool ICE MAKER Manual

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Installation Instructions
for Ice Maker Drain Pump
Kit Contains:
Drain Pump
(1)
(1)
Drain Tube, 5/8” ID x 5-1/8” (ice maker bin to pump reservoir inlet)
Drain Tube Hose, 1/2” ID x 10’ (pump discharge to household drain)
(1)
Vent Tube, 5/16” ID x 32” (pump reservoir vent to ice maker cabinet back)
(1)
Cable Clamp (secures vent tube to back of ice maker)
(3)
(5)
Screws (secures pump to base plate and clamps to back of ice maker)
(1)
Small Adjustable Hose Clamp, 5/8” (secures vent tube to pump)
(3)
Large Adjustable Hose Clamps, 7/8” (secures drain tube to bin and drain pump reservoir inlet)
Rear Panel
(2)
(1)
Instruction Sheet
IMPORTANT: Connect drain pump to your drain in accordance with all state and local codes and ordinances. It may be desirable to insulate
drain tube thoroughly up to drain inlet to minimize condensation on the drain tube hose. Insulated tube kit part W10365792 is available
for purchase. Drain pump is designed to pump water to a maximum height of 10 feet.

If Ice Maker is Presently Installed:

Drain Pump Installation:
1.

NOTE: If ice maker is not installed, proceed to Drain Pump
Installation section.
1.

Push the selector switch to the OFF position.

Remove rear panel. See Figure 3 for five (5) screw locations.
Pull old rear panel away from drain tube and discard panel
and save screws.
screws

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death
or electrical shock.

2.

Unplug ice maker or disconnect power.

3.

Shut off water supply. Wait 5 to 10 minutes for the ice to fall
into the storage bin. Remove all ice from bin.

4.

Unscrew the drain cap from the bottom of the water
pan located inside the storage bin. Allow water to drain
completely. Replace drain cap. See Figure 1.

screws

figure 3
2.

Remove old drain tube and clamp. Discard old drain tube
and clamp.

3.

Install new drain tube to pump reservoir inlet using new
adjustable clamps. See Figure 4.
New 7/8” adjustable
hose clamp installed
New drain tube
(bin to pump)

New 7/8” adjustable
hose clamp installed
Drain Cap

New Drain Pump
reservoir inlet

figure 1
5.

If ice maker is built into cabinets, pull ice maker out of the
opening.

6.

Disconnect water supply line. See Figure 2.

figure 4
Cable
Clamp

1/4” copper tubing

ferrule
(sleeve)

1/4” compression nut

(continued on next page)

Ice maker connection

figure 2
Instruction Sheet W10361742 Rev C 10/16

­— 1 —

the ice

cebin to
er

amps. See

n to
s. See

4.

Install vent tube (5/16” x 32”) to pump reservoir vent. Use
5/8” adjustable
Parts
Locations clamp, supplied. See Figure 5.
Parts
Locations
NOTE: DO NOT install household drain tube at this time.

13.

Do not us

Failure to
fire, or ele

(3)
kit.18. Plug in ic

19. Turn on ic
20. Wait for r
NOTE: Do
notDopinch,
kinkkink
orordamage
thevent
vent
tube.
Check
NOTE:
not pinch,
damage the
tube.
Check
that it that ice make
it is not damaged
or pinched
between
the cabinet
and
is not damaged
or pinchedor
or kinked
kinked between
the cabinet
and
the ice maker.
the ice maker.

Vent Tube

A
B

tube and drain pump discharge tube through cutouts in the
rear panel.
13. Secure rear panel with original screws. See “Rear Panel”
illustration.
Secure
ventvent
tube
maker
using
three
14. Secure
tubeto
to back
back ofof
ice ice
maker
using three
clamps
clampsand
and
the#8-32
three
(3)
remaining
screws
supplied
in
three
x ³⁄₈"
screws,
supplied.
See “Vent
Tube”
illustration.
See Figure
7.

Vent
A Tube

Gravity D

DSmall (5/8”)

B

Hose Clamp
E
D Pump
Drain

Connect the
state and loc
provided with
when installin
back into the
the floor, cau
■ Drain line
(inside di

E

C

Drain Pump
G
discharge tube
CF
power cord
clamp andGscrew
A. Vent tube
(2) Pump
⁵⁄₈" hose clamp
B. F
C.Mounting
Drain pump discharge tube
Screws
D. Drain
pump

B
Clamps and
screws

Ice maker

E. Ice maker unit power cord
power cord
F. #8-32 x ³⁄₈" pump
mounting screws
G. Drain pump power cord, clamp
and
screw
E. Ice
maker unit power cord

A. Vent tube
B. ⁵⁄₈" hose clamp
#8-32 x ³⁄₈" pump
figure 5F. mounting
6. Drain
Remove
power
cord clamp
screw
attached to ice
screws
C.
pump
discharge
tube and ground
5. Remove
power
cord which
clampisand
screw
to ice
maker
maker
power cord,
mounted
toattached
the unit
base.
See
G.
Drain
pump
power
cord,
clamp
D. Drain
pump
power
cord.
This isillustration.
located at theand
unit
base. See Figure 5.
“Parts
Locations”
screw
Clamp
and
screw
will
be reused.
NOTE:
Clamp
and
screw
will be reused.

Remove
power
clamp
and
ground
attached
to ice
Slide
drain
pump
into
ice maker
maker
base
on
right
6. 6. 7.
Slide
drain
pumpcord
into the
the ice
base
onscrew
thethe
right
side.side.
maker
power
cord, tab
which
is mounted
to
the
unit base.
See
The
pump
mounting
tabshould
should
slip
slotslot
The
pump
mounting
slipinto
intothe
therectangular
rectangular
illustration.
in the
ice
makerbase.
base.
ItIt will
to tip
in“Parts
the
iceLocations”
maker
willbebenecessary
necessary
to the
tip pump
the pump
slightlyClamp
to slip into
the
slot. See
Pump Mounting Tab
NOTE:
and
screw
will “Drain
be6reused.
slightly
to
slip
into
the
slot.
Figure
shows
the
mounting
tab
Slot” illustration.
that
must
slip
into
the
slot.
7. Drain
SlidePump
drainMounting
pump intoTab
theSlot
ice maker base on the right side.
The pump mounting tab should slip into the rectangular slot
in the ice maker base. It will be necessary to tip the pump
slightly to slip into the slot. See “Drain Pump Mounting Tab
Slot” illustration.

Drain Pump Mounting Tab Slot

ose clamp
ervoir inlet

■

Drain line
122 cm) o
run and m

■

The floor
drainage

■

The ideal
2" (5.08 c
outlet of
1" (2.54 c
standpip

■

Do not co
pipe syst
maker.

Vent Atube

A. Vent tube
B. Clamps and screws

figure 7

14. Attach 1/2” ID x 10’ drain tube to drain pump discharge tube.
See Figure 5.
15. Attach ¹⁄₂" I.D. x 10 ft (3 m) drain tube to pump discharge

IMPORTANT

15. Connect
iceSee
maker
water supply
and install ice maker asavailable. A D
tube.
“Partsto
Locations”
illustration.
specified
by Do
thenotproduct
installation
instructions,
suppliedpurchase.
NOTE:
connect outlet
end of drain
tube to a closed
system to keep drain water from backing up into the ice
with thepipe
­product.
maker.

16. Check
all connections for leaks.
16. Connect ice maker to water supply and install ice maker as
specified by the product installation instructions.

WARNING

Mounting
A
tab slot

mp
djustable

ime.
clamp
r inlet

figure 6

7.

Line up
the two
(2) screw holes at the rear of the pump. Use
Drain
Pump
Installed
A
two (2) of the screws supplied in kit. See Figure 5.

8.

Connect drain tube to ice maker bin outlet (5/8” ID), using
7/8” adjustable clamp, supplied. See Figure 4.

9.

Coil ice maker power cord into a 4” diameter coil. Wrap
A. Mounting tab slot
electrical tape around the power cord in several
places to
A
keep the cord in a coil. Locate coiled cord between the drain
Drain Pump Installed
pump and side of enclosure and plug into the receptacle of
the drain pump. See Figure 5.

able

.

Electrical Shock Hazard
Plug into a grounded 3 prong outlet.

A. Mounting tab slot

Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
17. Plug in ice maker or reconnect power.

10. Attach the drain pump power cord to ice maker unit base
with clamp and screw (removed in step 5) that was used to
attach ice maker power cord. See Figure 5.

18. Turn selector switch to ON.
19. Wait for rinsing cycle, approximately 5 minutes, to be sure
the ice maker is operating properly.

11. Place new rear panel (small one for 15” ice makers, large
A vent
one for 18”) against the back of the ice maker. Route the
A. Drain pump installed
tube and drain pump
discharge tube through cutouts in the
rear panel.
12. Secure rear panel with original screws. See Figure 3.

© Whirlpool Corporation 2016
  (All Rights Reserved)

A. Drain pump installed

­— 2 —

W10361742 C



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2010:11:09 10:39:02-06:00
Modify Date                     : 2017:02:03 13:29:38-06:00
Subject                         : Whirlpool | Icemaker Pump | 1901A | Installation Instructions~
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2017:02:03 13:29:38-06:00
Creator Tool                    : Adobe InDesign CS4 (6.0.5)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 12398 bytes, use -b option to extract)
Instance ID                     : uuid:3e116121-17fd-4d7f-a278-97ab6cb8c5bf
Document ID                     : xmp.did:ECB8EC1E5DDCDF11A3BCB6004093869B
Original Document ID            : xmp.did:4BD71096A3D0DF119E2BC50E67E06114
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:4BD71096A3D0DF119E2BC50E67E06114, xmp.iid:4CD71096A3D0DF119E2BC50E67E06114, xmp.iid:4DD71096A3D0DF119E2BC50E67E06114, xmp.iid:EBB8EC1E5DDCDF11A3BCB6004093869B, xmp.iid:ECB8EC1E5DDCDF11A3BCB6004093869B, xmp.iid:EDB8EC1E5DDCDF11A3BCB6004093869B, xmp.iid:EEB8EC1E5DDCDF11A3BCB6004093869B, xmp.iid:5B4E519D00DDDF118677D874B3D0E335, xmp.iid:5C4E519D00DDDF118677D874B3D0E335, xmp.iid:5D4E519D00DDDF118677D874B3D0E335, xmp.iid:5F4E519D00DDDF118677D874B3D0E335, xmp.iid:604E519D00DDDF118677D874B3D0E335, xmp.iid:624E519D00DDDF118677D874B3D0E335, xmp.iid:634E519D00DDDF118677D874B3D0E335, xmp.iid:644E519D00DDDF118677D874B3D0E335, xmp.iid:BF2180272FDDDF11A6758E49B7DAC4DA, xmp.iid:674E854AEBDDDF1183EE93472A8A9F8F, xmp.iid:684E854AEBDDDF1183EE93472A8A9F8F, xmp.iid:43B095BAEDDDDF11B60881FB69498F5D, xmp.iid:44B095BAEDDDDF11B60881FB69498F5D, xmp.iid:D7B06DFA07E1DF11B96381CF1F73CDDD, xmp.iid:D8B06DFA07E1DF11B96381CF1F73CDDD, xmp.iid:D9B06DFA07E1DF11B96381CF1F73CDDD, xmp.iid:DAB06DFA07E1DF11B96381CF1F73CDDD, xmp.iid:DBB06DFA07E1DF11B96381CF1F73CDDD, xmp.iid:A52B50191EE1DF11B443B35D668F5040, xmp.iid:780AEA18E5E1DF11B42DB7962E72AE8E, xmp.iid:790AEA18E5E1DF11B42DB7962E72AE8E, xmp.iid:7A0AEA18E5E1DF11B42DB7962E72AE8E, xmp.iid:67119FA5F4E1DF119F1A91D52C6F7D3C, xmp.iid:68119FA5F4E1DF119F1A91D52C6F7D3C, xmp.iid:69119FA5F4E1DF119F1A91D52C6F7D3C, xmp.iid:43F75D4305ECDF1187E0B59720B59DAD, xmp.iid:44F75D4305ECDF1187E0B59720B59DAD, xmp.iid:45F75D4305ECDF1187E0B59720B59DAD, xmp.iid:46F75D4305ECDF1187E0B59720B59DAD, xmp.iid:47F75D4305ECDF1187E0B59720B59DAD, xmp.iid:48F75D4305ECDF1187E0B59720B59DAD, xmp.iid:49F75D4305ECDF1187E0B59720B59DAD, xmp.iid:4AF75D4305ECDF1187E0B59720B59DAD, xmp.iid:4BF75D4305ECDF1187E0B59720B59DAD, xmp.iid:4CF75D4305ECDF1187E0B59720B59DAD
History When                    : 2010:10:05 12:11:26-05:00, 2010:10:05 12:13:29-05:00, 2010:10:05 12:13:29-05:00, 2010:10:20 10:17:15-05:00, 2010:10:20 10:17:15-05:00, 2010:10:20 10:23:41-05:00, 2010:10:20 10:32:56-05:00, 2010:10:21 05:47:35-05:00, 2010:10:21 08:28:56-05:00, 2010:10:21 08:32:51-05:00, 2010:10:21 10:08:14-05:00, 2010:10:21 10:33:46-05:00, 2010:10:21 10:58-05:00, 2010:10:21 11:00:58-05:00, 2010:10:21 11:14:30-05:00, 2010:10:21 11:20:44-05:00, 2010:10:22 09:47:28-05:00, 2010:10:22 10:00:43-05:00, 2010:10:22 10:04:55-05:00, 2010:10:22 10:08:12-05:00, 2010:10:26 08:50:22-05:00, 2010:10:26 08:52:42-05:00, 2010:10:26 09:33:07-05:00, 2010:10:26 09:33:54-05:00, 2010:10:26 09:37:44-05:00, 2010:10:26 11:28:43-05:00, 2010:10:27 11:13:12-05:00, 2010:10:27 11:23:51-05:00, 2010:10:27 11:24:20-05:00, 2010:10:27 13:12:59-05:00, 2010:10:27 13:16:32-05:00, 2010:10:27 13:24:43-05:00, 2010:11:09 07:28:39-06:00, 2010:11:09 07:41:16-06:00, 2010:11:09 09:58:41-06:00, 2010:11:09 10:02:10-06:00, 2010:11:09 10:11:30-06:00, 2010:11:09 10:15:32-06:00, 2010:11:09 10:18:21-06:00, 2010:11:09 10:19:42-06:00, 2010:11:09 10:36:04-06:00, 2010:11:09 10:38:49-06:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /
Derived From Instance ID        : xmp.iid:EBB8EC1E5DDCDF11A3BCB6004093869B
Derived From Document ID        : xmp.did:4BD71096A3D0DF119E2BC50E67E06114
Derived From Original Document ID: xmp.did:4BD71096A3D0DF119E2BC50E67E06114
Derived From Rendition Class    : default
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 299.99, 72.00, 72.00, 72.00, 72.00, 72.00, 299.99, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 299.99, 72.00, 72.00, 72.00, 72.00, 72.00, 299.99, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:c29e4873-3b9d-499a-8647-87b35f8048a2, xmp.iid:C45BBCDA07E1DF11BEDBFBD439D7DE8A, uuid:f8ca4f2f-3095-40de-ab3a-57d53fa35c23, uuid:431b4a46-b58b-4a42-9ec7-839eb0236ff9, uuid:25a6dbd7-5c97-4544-9ce2-c714e4344325, uuid:894431b2-2d6d-4abd-9cbe-007711ef7d1f, uuid:341a2cff-f74d-4edf-acb0-f86d3463cb6b, xmp.iid:C45BBCDA07E1DF11BEDBFBD439D7DE8A, uuid:f8ca4f2f-3095-40de-ab3a-57d53fa35c23, uuid:4816c8e9-42f6-425c-933f-15a7e4fe9a0c, uuid:431b4a46-b58b-4a42-9ec7-839eb0236ff9, uuid:25a6dbd7-5c97-4544-9ce2-c714e4344325, uuid:894431b2-2d6d-4abd-9cbe-007711ef7d1f, uuid:6be0ab2c-295d-4346-be52-64fe881b4d91
Manifest Reference Document ID  : uuid:37736f8a-8a19-486b-931e-1ace6f7bf6d0, xmp.did:C45BBCDA07E1DF11BEDBFBD439D7DE8A, xmp.did:C316BF9504DDDF11A1B9E627C8C9751D, xmp.did:C416BF9504DDDF11A1B9E627C8C9751D, xmp.did:D96FF34D2DDDDF11BF438783C1CB23BC, xmp.did:C616BF9504DDDF11A1B9E627C8C9751D, uuid:323ea121-bd86-464f-9fc0-7736babeac09, xmp.did:C45BBCDA07E1DF11BEDBFBD439D7DE8A, xmp.did:C316BF9504DDDF11A1B9E627C8C9751D, uuid:eacb09ec-ad56-4feb-bc7e-d29f8557208f, xmp.did:C416BF9504DDDF11A1B9E627C8C9751D, xmp.did:D96FF34D2DDDDF11BF438783C1CB23BC, xmp.did:C616BF9504DDDF11A1B9E627C8C9751D, uuid:680df5e7-86c3-4a68-913c-a2ce758245cb
Doc Change Count                : 1784
Format                          : application/pdf
Title                           : W10361742C
Creator                         : 
Description                     : Whirlpool | Icemaker Pump | 1901A | Installation Instructions~
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Page Layout                     : SinglePage
Page Count                      : 2

EXIF Metadata provided by EXIF.tools