User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3492842 |
| Application ID | Mkm/iX1Ls+BSa1vOFpOMvQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 65.72kB (821465 bits) |
| Date Submitted | 2017-08-02 00:00:00 |
| Date Available | 2017-08-02 00:00:00 |
| Creation Date | 2017-06-21 17:24:13 |
| Producing Software | GPL Ghostscript 8.15 |
| Document Lastmod | 2017-08-02 10:58:25 |
| Document Title | Microsoft Word - TELINK_WiSE1220_Module_v1.0_210617.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Admin |
WiSe 1220 Technical Specification Bluetooth Module WiSe 1220 Hardware and Technical Specification Preliminary Version (Rev 1.1) Issued: 21/06/2017 WiSilica Inc Proprietary and Confidential WiSe 1220 Technical Specification Table of Contents General Information ............................................................................................................................... 4 Features .............................................................................................................................................. 4 General Description ............................................................................................................................ 4 Block Diagram: ........................................................................................................................................ 4 Application: ............................................................................................................................................. 5 Form factor: ............................................................................................................................................ 5 Hardware Specification: .......................................................................................................................... 5 Electrical characteristics.......................................................................................................................... 5 Absolute Maximum Ratings ................................................................................................................ 5 Recommended operating condition ................................................................................................... 6 PWM ....................................................................................................................................................... 6 Current Consumption: ............................................................................................................................ 6 RF Characteristics: ................................................................................................................................... 6 Pinout and Pin Description ..................................................................................................................... 7 Pinout Diagram ................................................................................................................................... 7 Recommended Land Pattern: ................................................................................................................. 9 Host details: ............................................................................................................................................ 9 Remote ................................................................................................................................................ 9 Smart lighting device........................................................................................................................... 9 Best practices .................................................................................................................................... 10 WiSilica Inc Proprietary and Confidential WiSe 1220 Technical Specification Revision History Rev No Rev 1.0 Rev1.1 WiSilica Inc Date 07/12/2016 21/06/2017 Notes Draft Release Block diagram and host part updated. Proprietary and Confidential WiSe 1220 Technical Specification General Information Features Bluetooth v4.2 specification complaint Support for Bluetooth 4.2 specification host stack 12 MHz and 32.768 kHz clock system 32.768 kHz for sleep time PWM/GPIO/UART interface PCB printed Antenna 8 programmable GPIO’s 512 KB Internal FLASH Debug SPI General Description WiSe 1220 enables ultra-low-power connectivity and basic data transfer for applications previously limited by the power consumption, size constraints and complexity of other wireless standards. WiSe 1220 is intended to provide considerably reduced power consumption and cost. Block Diagram: 2.4GHz 12MHz GPIO OSC PWM4 I2C BLE CHIP SPI FLASH 512kb UART POWER UART WiSilica Inc Proprietary and Confidential 3V WiSe 1220 Technical Specification Application: WiSe 1220 enables connectivity and data transfer to leading smartphone, tablet and personal computing devices including Apple iPhone, iPad, iPod and Mac products and leading Android devices. Smart mesh light application Smart home heating and lighting control Health sensors like blood pressure, thermometer and glucose meter Beacons Security Sensors Form factor: Dimension: 39.84x8mm Hardware Specification: COMPONENTS DESCRIPTION BLE CHIP TLSR8269F512AT32 CRYSTAL 12MHz Crystal Trim Value and Device ID: During the manufacturing process, all WiSe1220 Modules are tested for full RF and DC functionality. This includes measuring crystal frequency error and setting the crystal frequency trim token so the frequency error for an unmodulated RF tone is as close as possible to zero. At this time a unique Bluetooth Device Address is assigned to each module. Electrical characteristics Absolute Maximum Ratings Ratings Min Max Storage Temperature -40°C 85°C Supply voltage 2.6V 3.6V 3.6V Vss - 0.4 Vdd + 0.4V IO Supply Voltage Other Terminal Voltage WiSilica Inc Proprietary and Confidential WiSe 1220 Technical Specification Recommended operating condition Item Min Typical Max Storage Temperature -30 85°C Supply voltage 1.9V 3.3V 3.6V IO Supply Voltage 3.6V PWM Totally there are 4 PWM channels. Any of the IO’s can be configured as PWM. PWM Frequency: Maximum voltage for logic low: Absolute maximum current sourced: Absolute maximum voltage level: VIL IMAX Target frequency 40 kHz. =0V = mA VMax = 3.6V Current Consumption: Mode Total Typical Current at 3V Sleep Mode 6μA RX/TX active ~15mA @ 3.3V peak current RF Characteristics: Path Description Conditions Operating Frequency Min 2402 Maximum output power TX Max Unit 2480 MHz dBm 2nd harmonic TBD dBuV 3rd harmonic TBD dBuV TBD MHz Modulation delta F1 average TBD Modulation delta F1 / F2 0.8 Modulation delta F2 max RX Typ 1.3 100 Frequency accuracy -100 25 100 kHz Frequency offset -100 25 100 kHz Receiver Sensitivity -90 -89 -86 dBm Receiver Sensitivity (with dirty transmitter) -92 dBm Maximum received signal at 30.8% PER -10 dBm WiSilica Inc Proprietary and Confidential WiSe 1220 Technical Specification Pinout and Pin Description Pinout Diagram PINS 10 WiSilica Inc NAME RX TX GND SWS/PWM2 PWM5 PWM4_N PWM4 PWM0 PWM1 VDD FUNCTION UART UART Ground PWM/ Programming pins PWM/IO PWM/IO PWM/IO PWM/IO PWM/IO Power COMMENTS Programmable I/O or RX Programmable I/O or TX Ground Proprietary and Confidential Single Wire Interface Programmable I/O Programmable I/O Programmable I/O Programmable I/O Programmable I/O 3V3 Input WiSe 1220 Technical Specification Module Dimension WiSilica Inc Proprietary and Confidential WiSe 1220 Technical Specification Recommended Land Pattern: Host details: The WiSe1220 module is going to be embedded with different products like Remote and Smart lighting device. Remote Remote is used to send the trigger command to the heater or the device associated with that. It is intended to be a general purpose remote control. Also this device is the 2 x AA battery powered. Smart lighting device The smart lighting device not only controls lighting, it creates a smart mesh which also can be used to track personnel, assets, patients, anything that is equipped with or wearing a WiSilica BLE Tag. There is a tremendous amount of possibilities when you think about security, Workflow management, inventory management, and whole building automation. Also this device is 110 to 230V AC powered. WiSilica Inc Proprietary and Confidential WiSe 1220 Technical Specification Best practices When designing with WiSe1220 modules, please pay attention to the following recommendations • • • • While integrating module make sure all the module pads are soldered properly. The module's voltage requirement is 2.5 to 3.6V, if the power supply is over 3.3V, please use a voltage regulator. If the communicating host uses a different voltage then the BLE module, please make sure that the voltage matches on the communication ports. For best wireless signals, please avoid packing the antenna area close to metal parts or case. WiSilica Inc Proprietary and Confidential WiSe 1220 Technical Specification FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two cond itions: (1) this device may not cause harmful interference, and (2) this device must accept any int erference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could v oid the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital de vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec tion against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructi ons, may cause harmful interference to radio communications. However, there is no guarantee th at interference will not occur in a particular installation. If this equipment does cause harmful int erference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Reorient or relocate the receiving antenna. ‐ Reorient or relocate the receiving antenna. ‐Consult the dealer or an experienced radio/TV technician for help important announcement Important Note: Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Important Note: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling The final end product must be labeled in a visible area with the following" Contains FCC ID: 2AG4 NWISE1220 ". Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. WiSilica Inc Proprietary and Confidential
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Admin Create Date : 2017:06:21 17:24:13Z Modify Date : 2017:08:02 10:58:25+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2017:08:02 10:58:25+08:00 Format : application/pdf Creator : Admin Title : Microsoft Word - TELINK_WiSE1220_Module_v1.0_210617.doc Producer : GPL Ghostscript 8.15 Document ID : uuid:94552f30-3aa3-44a9-8235-35050d7e54d3 Instance ID : uuid:cfd0ac37-9972-4484-97cb-70b29a27e860 Page Count : 11EXIF Metadata provided by EXIF.tools