Winners Sun Plastic and Electronic WS-SQB842B Smartphone 3-axis Stabilizer ( BT) User Manual

Winners'Sun Plastic & Electronic (Shenzhen) Co., Ltd. Smartphone 3-axis Stabilizer ( BT)

User Manual

Gendelson Plastic Electronics(Shenzhen) Co., Ltd.Shenzhenshilonghua, Dalang Street, Yingtai Industrial Zone, Building E3-Axis Handheld Stabilizing Gimbalfor SmartphoneQuick Guide V1.1Product overviewAPP GuidelineCalibration Disclaimer Warranty cardUser name:Contact No.:Address:Purchase date:Prod serial No.:Failure issue:Service record:1. 15 days upon date of purchase, if there is function problem, the commodity and package without any damage, after we check and confirm, we wer the same product for replacement.Certificate of approvalCertificate of QualltyThis product is confirmed to meet quality standards and permitted for sale after strict in spection.QC Inspector:Firmware UpgradeInstallation Instruction Balance the smartphoneOperation InstructionStabilizer Charging& Smartphone Charging1. Roll Motor2.Slide arm3. Bluetooth Light4. Zoom In/Zoom Out5. 1/4 Inch ExtensionScrew Hole6. Tilt Motor7. Pan Motor8. Mode Light9. Joystick10. Mode Button11. ON/OFF (Shutter Button)12. Handle( Battery inside)Rolling 320° Tilting 320°Panning 640°Slide arm Rotated holderPower IndicatorLightCharging PortFor iPhone, please off “Portrait Orientation”.For Android phone, please enable “Auto-rotate screen”.It's the better to connect bluetooth in the APP,rather than setting in mobile phone*Make sure the gimbal indicator keeps on.1/4 InchExtensionScrew Hole*Smartphone not includedFully charge the stabilizer before using it for the first time.Using the standard USB cable connecting to the stabilizer charging port.(or other power sources)1. Enable the Bluetooth on the mobilephone.2. Open the App, choose the product model then confirm into Bluetooth connection.3. Make sure the gimbal indicator keeps on.1. If the gimbal has the following situations, please calibrate it:① The pitch angle is not leveled with the horizontal surface.② The roll angle is not parallel to the horizontal surface.③ Under the lock mode, the panning angle drifting.2. Calibration Operation Instruction:Method 1: Off-line Calibration(1)Power on the gimbal(around 3 seconds), long press the mode button over 6 seconds till the mode light is solid.(2)Lay the gimbal on a static flat surface; make sure it has no shaking Calibration is finish when the mode light is continuously flashing for 3 times.1. Please install and use the product according to the manual!2. Please use the standard battery charger！3. Please reconfirm the gimbal and the smartphone are well installed before power on!4. Keep the battery away from fire and heat source!5. Prohibit any user for any illegal purpose. Users will be responsible for all behavior of purchasing and using the products.6. For any unknown sources or usage, we will not provide any service.7. If there is any question, please contact the technician of Hohem Tech, we won't be responsible for any wrong operations by users.8. Hohem Tech reserves the right for final explanation.(3) Power off the gimbal and restart it, if the calibration is unsuccessful, you can repeat step(1)(2)to reinitialize.Method 2: 6-Side Calibration Via AppPlease ensure the stabilizer is connected with App via bluetooth,then enter “Calibration” and follow the tips to calibrate in the AppPlease ensure the stabilizer is connected with App via Bluetooth, then enterthe “Firmware Upgrade” and follow the tips to upgrade the latest firmware.Install the ‘Gimbal Studio’AppPlease make sure the gimbal is turned off before mount the phone and we suggest remove the phone case.(2) Manually rotate the phone clamp to make the phone in vertical shooting.*8 shifts for optionalBluetooth Light:Solid on: Bluetooth connectedQuickly flash twice: Power on/offNot lit: Bluetooth is not connectedZoom in/out& Focus(Setting in the App)Panning right/leftTilting/ downMode lightMode Button①On/Off(Long press for 3 seconds② Shutter Button:Single Press: Take photoDouble press: Start video(Bluetooth is connected)(1）Push and open the phone clamp, insert the smartphone until the home button side as close as possible against to the tilt motor. To adjust the smartphone gravitycenter by sliding arm until it keepsbalance on the tilt axis to ensurethe best stabilizing status andenduration time.NOTE: The phone Home button side must be placed closed to the tilt motor and ensure it is fixed tightly in order to avoid the gimbal shaking.Search for ‘Gimbal Studio’in the App Store or Google Playand install the app on your mobile phone.A. 4Led lights indicators 4Led lights on means power is 100% 3Led lights on means power is 75% 2Led lights on means power is 50% 1Led lights on means power is 25%B. lndicator Light Fast Flashing: Charging status C. lndicator Light Solid: Fully charged status*‘Gimbal Studio’ supports iOS 9.0 and Android 8.0 or above.Mode ButtonOperationSingle ClickDouble ClickTriple clickQuartic ClickLong Press For 6 SecondsPan FollowingPan& Tilt FollowingAll LockedAll FollowingCalibrationFlash for once(Quick flash)Flash for twiceFlash for tripleFlash foronce(Slow fiash)Solid onWork Modes Mode Light InstructionDefault mode. tilt & roll axis both locked, camera can move to left or right smoothly.Roll axis locked, camera can move to left/right, and tilt up/down.The camera stays in its current orientation.Tilt axis, roll axis and pan axis all follow.Calibration will be needed when tilt or roll angle not leveled withhorizontal surface, or pan angle drift in lock mode.Gimbal Studio0 2Mount the SmartphoneMicro USB Port:Charging the stabilizer2. Warranty valid only under normal use.3. Used in the normal circumstances, 1 year warranty, maintenance of life(not include the All accidents or man-made damage, teardowns or misuse damage is outside the scope of the warranty.4. Please keep the warranty card properly and show them together when asking for free of charge repair If you failed to provide the warranty card or to alter it, maybe cause we deal with the product as without warranty.5. All accidents or man-made damage, teardowns or misuse damage is outside the scope of the warranty.12123456
Federal Communication Commission (FCC) Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference causedby unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifi cations not expres sly approved by the p artyresponsible for compliance could void the user's authority to operate this equipment.

Navigation menu