Winners Sun Plastic and Electronic WS-SQB842B Smartphone 3-axis Stabilizer ( BT) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4099634
Application ID	oH6wXQaVQKv/I+Z8cPqOXg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	319.97kB (3999685 bits)
Date Submitted	2018-12-09 00:00:00
Date Available	2018-12-09 00:00:00
Creation Date	2018-12-03 10:37:52
Producing Software	Adobe Acrobat Pro 11.0.23
Document Lastmod	2018-12-10 10:15:14
Document Title	User Manual
Document Creator	Adobe Acrobat Pro 11.0.23
Document Author:	hohem

Product overview
3-Axis Handheld Stabilizing Gimbal
for Smartphone
Quick Guide V1.1
Rolling 320°
1. Roll Motor
2.Slide arm
3. Bluetooth Light
4. Zoom In/Zoom Out
5. 1/4 Inch Extension
Screw Hole
6. Tilt Motor
7. Pan Motor
8. Mode Light
9. Joystick
10. Mode Button
11. ON/OFF (Shutter Button)
12. Handle( Battery inside)
Tilting 320°
2 Slide arm
Install the ‘Gimbal Studio’App
Search for ‘Gimbal Studio’in the App Store or Google Playand install the app on your mobile phone.
Mode Light
Single Click
Pan Following
Flash for once
(Quick flash)
Double Click
Pan& Tilt Following Flash for twice
Roll axis locked, camera can move to left/right, and tilt up/down.
Triple click
All Locked
Flash for triple
The camera stays in its current orientation.
Quartic Click
All Following
Flash for
once(Slow fiash)
Tilt axis, roll axis and pan axis all follow.
Long Press For Calibration
6 Seconds
Instruction
Solid on
Default mode. tilt & roll axis both locked, camera can move to left or
right smoothly.
Calibration will be needed when tilt or roll angle not leveled with
horizontal surface, or pan angle drift in lock mode.
APP Guideline
Power
Indicator
Light
12
1/4 Inch
Extension
Screw Hole
Calibration
1. If the gimbal has the following situations, please calibrate it:
① The pitch angle is not leveled with the horizontal surface.
② The roll angle is not parallel to the horizontal surface.
③ Under the lock mode, the panning angle drifting.
2. Calibration Operation Instruction:
Method 1: Off-line Calibration
(1)Power on the gimbal(around 3 seconds), long press the mode button over 6 seconds till the mode light is solid.
(2)Lay the gimbal on a static flat surface; make sure it has no shaking Calibration is finish when the mode light is
continuously flashing for 3 times.
1. Enable the Bluetooth on the mobilephone.
For iPhone, please off “Portrait Orientation”.
For Android phone, please enable “Auto-rotate screen”.
2. Open the App, choose the product model then confirm into Bluetooth connection.
Gimbal Studio
It's the better to connect bluetooth in the APP,rather than setting in mobile phone
3. Make sure the gimbal indicator keeps on.
*Make sure the gimbal indicator keeps on.
Please make sure the gimbal is turned off before mount the phone and we suggest remove the phone case.
(1）Push and open the phone clamp, insert the smartphone until the home button side as close as possible against to
the tilt motor.
To adjust the smartphone gravity
center by sliding arm until it keeps
balance on the tilt axis to ensure
the best stabilizing status and
enduration time.
Panning 640°
(3) Power off the gimbal and restart it, if the calibration is unsuccessful, you can repeat step(1)(2)to reinitialize.
Method 2: 6-Side Calibration Via App
Please ensure the stabilizer is connected with App via bluetooth,
then enter “Calibration” and follow the tips to calibrate in the App
Firmware Upgrade
Please ensure the stabilizer is connected with App via Bluetooth, then enter
the “Firmware Upgrade” and follow the tips to upgrade the latest firmware.
Operation Instruction
*‘Gimbal Studio’ supports iOS 9.0 and Android 8.0 or above.
Stabilizer Charging& Smartphone Charging
Micro USB Port:Charging the stabilizer
02
Panning right/left
Tilting/ down
NOTE: The phone Home button side must be placed closed to the tilt motor and ensure it is fixed tightly in order to avoid the gimbal shaking.
(2) Manually rotate the phone clamp to make the phone in vertical shooting.
Fully charge the stabilizer before using it for the first time.
Using the standard USB cable connecting to the stabilizer charging port.
(or other power sources)
*Smartphone not included
Work Modes
Balance the smartphone
Rotated holder
Charging Port
Mode Button
Operation
Mount the Smartphone
Installation Instruction
Bluetooth Light:
Solid on: Bluetooth connected
Mode light
Quickly flash twice: Power on/off
Mode Button
Not lit: Bluetooth is not connected
A. 4Led lights indicators
4Led lights on means power is 100%
3Led lights on means power is 75%
2Led lights on means power is 50%
1Led lights on means power is 25%
B. lndicator Light Fast Flashing: Charging status
C. lndicator Light Solid: Fully charged status
①On/Off(Long press for 3 seconds
*8 shifts for optional
② Shutter Button:
Single Press: Take photo
Zoom in/out& Focus
(Setting in the App)
Disclaimer
Warranty card
1. Please install and use the product according to the manual!
2. Please use the standard battery charger！
3. Please reconfirm the gimbal and the smartphone are well installed before power on!
4. Keep the battery away from fire and heat source!
5. Prohibit any user for any illegal purpose. Users will be responsible for all behavior of purchasing and using the products.
6. For any unknown sources or usage, we will not provide any service.
7. If there is any question, please contact the technician of Hohem Tech, we won't be responsible for any wrong operations
by users.
8. Hohem Tech reserves the right for final explanation.
1. 15 days upon date of purchase, if there is function problem, the commodity and package without any damage, after we
check and confirm, we wer the same product for replacement.
Certificate of approval
User name:
Double press: Start video
(Bluetooth is connected)
2. Warranty valid only under normal use.
3. Used in the normal circumstances, 1 year warranty, maintenance of life(not include the All accidents or man-made
damage, teardowns or misuse damage is outside the scope of the warranty.
4. Please keep the warranty card properly and show them together when asking for free of charge repair If you failed to
provide the warranty card or to alter it, maybe cause we deal with the product as without warranty.
5. All accidents or man-made damage, teardowns or misuse damage is outside the scope of the warranty.
Contact No.:
Certificate of Quallty
This product is confirmed to meet quality
standards and permitted for sale after
strict in spection.
QC Inspector:
Address:
Purchase date:
Prod serial No.:
Failure issue:
Service record:
Gendelson Plastic Electronics(Shenzhen) Co., Ltd.
Shenzhenshilonghua, Dalang Street, Yingtai Industrial Zone, Building E
Federal Communication Commission (FCC) Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement, The device
can be used in portable exposure condition without restriction Federal
Communication Commission (FCC) Radiation Exposure Statement Power is so low
that no RF exposure calculation is needed.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications or changes to this equipment. Such modifications or
changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifi cations not expres sly approved by the p artyresponsible for
compliance could void the user's authority to operate this equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : hohem
Create Date                     : 2018:12:03 10:37:52+08:00
Modify Date                     : 2018:12:10 10:15:14+08:00
Title                           : 
XMP Toolkit                     : XMP Core 5.1.2
Metadata Date                   : 2018:12:03 14:17:21+08:00
Creator Tool                    : Adobe Acrobat Pro 11.0.23
Format                          : application/pdf
Creator                         : hohem
Document ID                     : uuid:ff08e750-d742-4cb4-a2b5-f2047e993b30
Instance ID                     : uuid:ec2cca5d-d508-474a-ac46-ba12acba1a36
Producer                        : Adobe Acrobat Pro 11.0.23
Page Count                      : 2
AI Creator Version              : 16.0.0
For                             : Administrator,
Bounding Box                    : -1 -272 1702 256
AI Build Number                 : 682
AI Color Usage                  : Color
AI Ruler Units                  : Points
AI Color Model                  : CMYK
AI Target Resolution            : 800
AI Num Layers                   : 1
Creator Version                 : 16
Container Version               : 11

EXIF Metadata provided by EXIF.tools