Wireless Computing R222 Wireless Keyboard User Manual RF 222instructions qxp

Wireless Computing Inc Wireless Keyboard RF 222instructions qxp

manual

SETUP1. Remove the battery door on the underside of thekeyboard.2. Insert two AA alkaline batteries (included) into thebattery compartment. The batteries face in oppo-site directions. The direction of each battery ismarked.3. Replace the battery door.4. Plug the receiver into a USB port on yourcomputer. Do not place the receiver on or in ametal cabinet or near other equipment and strongEMI sources.SELECT ADDRESS TO ENABLE ENCRYPTIONWhen delivered, your RF-222 operates on addresszero. You may leave it on address zero, but while onaddress zero, keystrokes are not encrypted and yourcomputer may receive and respond to signals fromother Wireless Computing products.1. Press and release the black button on the under-side of the receiver. The LED on top of the receiv-er begins blinking.2. While the LED on the receiver blinks, hold downthe Fn key and press-and-release the A key. Thissets the keyboard and receiver to one of 65,000random addresses and enables encryption.3. If you have a Wireless Computing mouse orremote control and wish to use it with this key-board, then you’ll need to select this sameaddress for the additional device(s). Refer to themouse or remote control instructions for the but-ton(s) to press. Each time you set an address, the receiver LEDblinks for 30 seconds, allowing you to address anadditional keyboard, mouse or remote control.USING A MACINTOSHTo put the keyboard into Macintosh mode, or to tog-gle back to Windows mode, press the Left-Win, Left-Alt, Right-Alt, and Right-Win keys together at thesame time.Note these different key functions:KEY LABEL MACINTOSH FUNCTIONWin Option/AltAlt CmdPause/Break F13OPERATION The RF-222 Compact Keyboard is designed to oper-ate reliably at distances of 100 feet (31 meters).Operating range will vary depending on positioning ofthe receiver and keyboard, nearby sources of interfer-ence and other environmental factors.Pressing a key or rolling the trackball makes thegreen "sending" LED blink on the keyboard and thereceiver LED blink green.Operating instructionsRF-222 Wireless Keyboardwith Optical TrackballWireless Computing, Inc., Austin, TX512.263.2205 wirelesscomputing.com
The keyboard includes an overlay numeric keypad.Press the NumLk key to toggle the numeric keypad(blue keys) on and off. Hold Fn key to select numerals. When the "low battery" LED turns on, replace the bat-teries as soon as possible.TROUBLESHOOTINGThe receiver LED is not lit• Ensure that the computer is powered on and thereceiver is connected to the computer.• Unplug the receiver and plug it into the computer'sUSB port again.Key presses don't get to computer• If the sending LED on the keyboard flashes all red,re-select the address.• If the sending LED flashes green and yet thecomputer does not respond, be sure a program isrunning that responds to the keystrokes you aretyping. Also, try unplugging then re-plugging thereceiver.• If the sending LED flashes mixed green and red,reposition the receiver and ensure the keyboardand receiver are no more than 100 feet apart.• If the sending LED does not flash at all, replace thebatteries in the keyboard.Keyboard works, but other Wireless Computingdevices do not• The other devices have the wrong address. Re-select the address for all devices, including the key-board.Cursor moves by itself or keystrokes appear fromnowhere• Your receiver is within range of another WirelessComputing product set to the same address. Re-select the address.FOR FURTHER ASSISTANCEVisit www.wireless-computing.com/support or callcustomer support at 512.263.2205 between 9:00 -5:00 Central Time.FCC INFORMATIONThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may cause unde-sired operation.FCC ID: L7MR222 RF-222 Wireless KeyboardL7MR019 RF-019 Dual Antenna ReceiverADDITIONAL INFORMATIONFor use with UL Listed, CSA approved personal com-puters. Not intended for use in machinery, medical orindustrial applications. Do not use in aircraft or haz-ardous locations.© Copyright 2008 Wireless Computing, Inc. All Rights Reserved. Wireless Computing is a trademark of Wireless Computing, Inc., Austin TX USA. 06-2008Caution: Any changes or modifications notexpressly approved by Wireless Computing couldvoid your authority to operate this device. No partsare user serviceable.

Navigation menu