Wireless Computing R222 Wireless Keyboard User Manual RF 222instructions qxp

Download:
Mirror Download [FCC.gov]
Document ID	1031485
Application ID	M2CL3Pj1DrMTIWrZQ0mNCg==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.5kB (218757 bits)
Date Submitted	2008-11-17 00:00:00
Date Available	2008-11-19 00:00:00
Creation Date	2008-05-13 17:18:24
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-05-13 17:18:24
Document Title	RF-222instructions.qxp
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Don_2

Operating instructions
RF-222 Wireless Keyboard
with Optical Trackball
SETUP
USING A MACINTOSH
1. Remove the battery door on the underside of the
keyboard.
To put the keyboard into Macintosh mode, or to toggle back to Windows mode, press the Left-Win, LeftAlt, Right-Alt, and Right-Win keys together at the
same time.
2. Insert two AA alkaline batteries (included) into the
battery compartment. The batteries face in opposite directions. The direction of each battery is
marked.
3. Replace the battery door.
4. Plug the receiver into a USB port on your
computer. Do not place the receiver on or in a
metal cabinet or near other equipment and strong
EMI sources.
SELECT ADDRESS TO ENABLE ENCRYPTION
When delivered, your RF-222 operates on address
zero. You may leave it on address zero, but while on
address zero, keystrokes are not encrypted and your
computer may receive and respond to signals from
other Wireless Computing products.
Note these different key functions:
KEY LABEL
Win
Alt
Pause/Break
MACINTOSH FUNCTION
Option/Alt
Cmd
F13
OPERATION
The RF-222 Compact Keyboard is designed to operate reliably at distances of 100 feet (31 meters).
Operating range will vary depending on positioning of
the receiver and keyboard, nearby sources of interference and other environmental factors.
Pressing a key or rolling the trackball makes the
green "sending" LED blink on the keyboard and the
receiver LED blink green.
1. Press and release the black button on the underside of the receiver. The LED on top of the receiver begins blinking.
2. While the LED on the receiver blinks, hold down
the Fn key and press-and-release the A key. This
sets the keyboard and receiver to one of 65,000
random addresses and enables encryption.
3. If you have a Wireless Computing mouse or
remote control and wish to use it with this keyboard, then you’ll need to select this same
address for the additional device(s). Refer to the
mouse or remote control instructions for the button(s) to press.
Each time you set an address, the receiver LED
blinks for 30 seconds, allowing you to address an
additional keyboard, mouse or remote control.
Wireless Computing, Inc., Austin, TX
512.263.2205 wirelesscomputing.com
The keyboard includes an overlay numeric keypad.
Press the NumLk key to toggle the numeric keypad
(blue keys) on and off. Hold Fn key to select numerals.
When the "low battery" LED turns on, replace the batteries as soon as possible.
TROUBLESHOOTING
The receiver LED is not lit
• Ensure that the computer is powered on and the
receiver is connected to the computer.
• Unplug the receiver and plug it into the computer's
USB port again.
Key presses don't get to computer
• If the sending LED on the keyboard flashes all red,
re-select the address.
• If the sending LED flashes green and yet the
computer does not respond, be sure a program is
running that responds to the keystrokes you are
typing. Also, try unplugging then re-plugging the
receiver.
• If the sending LED flashes mixed green and red,
reposition the receiver and ensure the keyboard
and receiver are no more than 100 feet apart.
• If the sending LED does not flash at all, replace the
batteries in the keyboard.
FOR FURTHER ASSISTANCE
Visit www.wireless-computing.com/support or call
customer support at 512.263.2205 between 9:00 5:00 Central Time.
FCC INFORMATION
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC ID:
L7MR222
L7MR019
RF-222 Wireless Keyboard
RF-019 Dual Antenna Receiver
ADDITIONAL INFORMATION
For use with UL Listed, CSA approved personal computers. Not intended for use in machinery, medical or
industrial applications. Do not use in aircraft or hazardous locations.
Keyboard works, but other Wireless Computing
devices do not
• The other devices have the wrong address. Reselect the address for all devices, including the keyboard.
Cursor moves by itself or keystrokes appear from
nowhere
• Your receiver is within range of another Wireless
Computing product set to the same address. Reselect the address.
Caution: Any changes or modifications not
expressly approved by Wireless Computing could
void your authority to operate this device. No parts
are user serviceable.
© Copyright 2008 Wireless Computing, Inc. All Rights Reserved.
Wireless Computing is a trademark of Wireless Computing, Inc., Austin TX USA.
06-2008

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:05:13 17:18:24-05:00
Create Date                     : 2008:05:13 17:18:24-05:00
Format                          : application/pdf
Title                           : RF-222instructions.qxp
Creator                         : Don_2
Document ID                     : uuid:6cdb16b6-1820-4edc-ac74-de0da1cd041e
Instance ID                     : uuid:26f1bbae-69fd-4afd-8d76-b0364f7a7801
Page Count                      : 2
Author                          : Don_2

EXIF Metadata provided by EXIF.tools