Wireless Engineering XBOARDRF05 Wireless Trackball Keyboard User Manual RF KBD manual v1 1
Wireless Engineering Inc. Wireless Trackball Keyboard RF KBD manual v1 1
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 613587 |
| Application ID | iXCLy9ASI2f4FGS+6g+Fmg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 22.63kB (282909 bits) |
| Date Submitted | 2005-12-21 00:00:00 |
| Date Available | 2005-12-21 00:00:00 |
| Creation Date | 0000-00-00 00:00:00 |
| Producing Software | GNU Ghostscript 7.06 |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | Microsoft Word - RF KBD manual_v1.1.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Administrator |
XBOARD RF05 2.4GHz RF Trackball Keyboard Quick Installation Guide (Preliminary) XBOARD RF (2.4GHz RF Trackball Keyboard) XBOARD RF, The 2.4GHz RF Wireless Trackball Keyboard and USB Receiver can create a flexible, convenient and wireless working environment. XBOARD RF with fancy design offers high frequency penetration, low interference, and omni-directional signal transmission. Employing reliable 2.4GHz RF wireless technology, XBOARD RF can be positioned up to 10 meters away from the PC in any direction (or angle), even with objects placed between the keyboard and USB receiver. Installing XBOARD RF 1. Install USB receiver 1. Plug the USB receiver into a free USB port of PC. [Caution] Windows 98 or later operating system is required for USB connectivity, and some computer systems do not fully support USB keyboards. 2. Connect the XBOARD RF 1. Install the Batteries. Install 3 AA batteries in the keyboard. Make sure they are inserted in the correct direction. 2. Connect the XBOARD RF with USB receiver The following steps initiate a connecting process of XBOARD RF to your PC. See Figure for the locations of the keys. (1) Push the Connect Button of USB receiver for 1 second (2) Press the ID Button of Keyboard. ID Button 3. Take your keyboard for a Spin You can now begin using your XBOARD RF. 11 Multimedia Hot keys 1. Mouse Button: Left/Right 8. Stop 2. ID Button 9. Scan previous Track 3. Windows Media Player 10. Scan Next Track 4. Mute 11. Email 5. Decrease Volume 12. Internet 6. Increase Volume 13. Trackball Mouse 7. Play/Pause Caring for Your XBOARD RF To keep the trackball on your XBOARD RF performing smoothly, you should clean it on a regular basis or as needed: Weekly: Wipe the trackball with an alcohol wipe or the cleaning cloth. Rotate the trackball 360 degree as you clean it. Monthly: 1. Remove the trackball cover by turning the cover about 1/8-turn counterclockwise. 2. Holding your hand over the trackball, turn the keyboard upside down. The cover and trackball should drop out of the keyboard. 3. Wipe the trackball slot, rollers, bearings, other trackball slot components, and the trackball with an alcohol wipe or the cleaning cloth. 4. Replace the trackball in the slot. 5. Replace the trackball cover: turn it 1/8-turn clockwise to lock it in place. CAUTION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Specifications Electrical/RF KEYBOARD Battery AA * 3 Power Consumption Power : 5VDC, +/-5% Working mode : 7.8mA,MAX Standby mode : 6.7Ma Sleep mode :32uA(after 10 minutes) RF specification Frequency : 2.420GHz Modulation mode :G FSK Channel : 1chs ID number : 256 Link : “ID” Key Effective distance : 7M Mouse function Track ball+2 button Compatible with Windows Windows 98/ME/2000/XP Mechanical specification Dimension 326(L)*178(W)*27.5(H)mm Weight 520g (No Battery). Receiver Specification Electronics specification Power consumption 5VDC, 5%,60mA Maximum RF specification Frequency : 2.420GHz Modulation mode : GFSK Channel : 1ch ID number : 256 Link : “SW” Key Effective distance : 7M Compatible with Windows Windows 98/ME/2000/XP Mechanical specification Dimension 80(L) * 21.5(W) * 12(H)mm Weight 12g max
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 7 Producer : GNU Ghostscript 7.06 Title : Microsoft Word - RF KBD manual_v1.1.doc Creator : PScript5.dll Version 5.2 Create Date : 11/14/2005 16:0:7 Author : AdministratorEXIF Metadata provided by EXIF.tools