Wireless Environment MB220 Power Failure Detector User Manual MB220 Power Failure Detectorl

Wireless Environment LLC Power Failure Detector MB220 Power Failure Detectorl

Users Manual

Thank you for purchasing the Mr. Beams™ Power Outage Detector and Remote (POD). The POD works with the Mr. Beams Power Outage Lights to automatically activate lights in the event of a power Outage. One POD can activate dozens of Power Outage Lights. We are certain your Mr. Beams Power Outage Lighting System will contribute to a safer environment and provide light where you need it at a very reasonable cost. ENCLOSED YOU WILL FIND: • Power Outage Detector & Remote • Rechargeable 3.6V NiMH Battery Item MB220 INSTRUCTION GUIDE MB220 Power Outage Detector Features: Power-Outage Activated – Your Power Out-age Detector works with the MB785 and MB985 Power Outage Lights and has a transmitter that will activate all Power Outage lights instantly when a power outage is detected. Flashlight– The POD has a bright LED for use as a flashlight. This flashlight automatically activates during a power Outage. Remote Control Feature—Your Power Outage Detector can control all Power Outage Lights as a remote control. Low Battery Indicator—The red LED on your light flashes when it is time to recharge batteries. WARNING • RISK OF ELECTRICAL SHOCK. For adult use only. This product is a light that uses 120V AC power. This product is not a toy and should not be stored or used in locations accessible to children. For safe use: plug into exposed wall outlet where device is ventilated and cannot contact bed coverings or other materials that may present a fire hazard. Do not use with extension cords. • Follow battery instructions for proper disposal and cautions. Remove screw on battery door as shown in Illustration 1. Remove battery door from back of POD (Illustration 2). IMPORTANT NOTES: • Auto Shut-Off Feature: If a power Outage occurs, the POD and Power Out-age Lights will activate. If a button on the POD is not pressed, all lights will turn off in 30 minutes to conserve battery life. • For instructions on Power Outage Lights, please refer to their User Manuals. • POD cannot charge while flashlight is on - therefore use as nightlight is not recommended. INSTALLATION INSTRUCTIONS Mr. Beams 57 E. Washington St. Chagrin Falls, OH 44035 877.298.9082 www.mrbeams.com BEFORE YOU PLUG IN YOUR POWER OUTAGE DETECTOR (POD): Illustration 1 Illustration 3 Illustration 2 Illustration 4 POWER OUTAGE DETECTOR + REMOTE + RECHARGEABLE FLASHLIGHT Install Battery by inserting the battery clip into the slot on the POD as shown in Illustration 3. Tuck wires in, replace bat-tery door and insert screw (Illustration 1). Retract plug on POD (Illustration 4) and plug into electrical outlet (Illustration 5). For safe use: plug into exposed wall outlet where de-vice is ventilated and cannot contact bed coverings or other materials that may present a fire hazard. LIMITED WARRANTY The product you have purchased is guaranteed against defects in workmanship and materials for the period stated on the package. Warranties implied by law are subject to the same time period limitation. Some states do not allow limitations on how long an implied warranty lasts, so this time limitation may not apply to you. If the product fails due to a manufac-turing defect during normal use, return the product and dated sales receipt to the store where purchased for replacement OR send the product and the dated sales receipt to the address above. Not Covered – Batteries are not covered by this warranty. Repair service, adjustment and calibration due to misuse, abuse or negligence are not covered by this warranty. Unauthorized service or modification to this product or of any furnished components will void this warranty in its entirety. This warranty does not include reimbursement for incon-venience, installation, set-up time, loss of use, postage, unauthorized service, or other products used in conjunction with, but are not supplied by, Wireless Environment. This warranty gives you specific legal rights, and you may also have other rights which vary. Removing the POD from the electrical outlet simulates a power Outage (Illustration 6). This turns on the Flashlight and all Power Out-age Lights that you have installed . Placing the POD back into a live electrical outlet will turn the flashlight off as well as all Power Outage Lights. In the event of a power Outage, the POD will immediately send a signal to turn on all Power Out-age Lights. The POD will also turn on its internal LED to serve as a flashlight (Illustration 7). OPERATION OF THE POWER OUTAGE DETECTOR (POD): To operate the flashlight, push the round button on the POD(Illustration 10). Your POD also serves as a remote control for all of the Power Outage Lights. The curved button on the top right turns all lights on (Illustration 8). The curved button on the top left of the POD turns all lights off (Illustration 9). Illustration 5 Illustration 6 Illustration 8 Illustration 7 Illustration 9 Illustration 10
CAUTIONRisk of Electric ShockDry location use onlyINSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONSIMPORTANT SAFETYINSTRUCTIONS WARNING – a) Read all the instructions before using the appliance. b) To reduce the risk of injury, close supervision is necessary when an appliance is used near children. c) Do not use outdoors. d) To reduce the risk of electrical shock, do not put the unit in water or other liquid. Do not place or store appliance where it can fall or be pulled into a tub or sink. When using electric appliances, basic precautions should always be followed, including the following: SAVE THESE INSTRUCTIONSAny Changes or modificaons not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.For household use only.The baery is not intended to be replacedby user.This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon.For a Class B digital device or peripheral, the instrucons furnished the user shall include the following or similar statement, placed in a prominent locaon in the text of the manual:Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separaon between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.

Navigation menu