Wireless Environment MB220 Power Failure Detector User Manual MB220 Power Failure Detectorl

Download:
Mirror Download [FCC.gov]
Document ID	1524040
Application ID	Tc+7qQd5PgTo+GSxJCjvlg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.87kB (260931 bits)
Date Submitted	2011-08-16 00:00:00
Date Available	2011-08-16 00:00:00
Creation Date	2011-07-13 17:10:10
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2011-08-12 15:40:15
Document Title	MB220 Power Failure Detectorl
Document Creator	PScript5.dll Version 5.2
Document Author:	Owner

Mr. Beams
57 E. Washington St.
Chagrin Falls, OH 44035
877.298.9082
www.mrbeams.com
Item MB220
INSTRUCTION GUIDE
POWER OUTAGE DETECTOR + REMOTE + RECHARGEABLE FLASHLIGHT
Thank you for purchasing the Mr. Beams™ Power
Outage Detector and Remote (POD). The POD
works with the Mr. Beams Power Outage Lights to
automatically activate lights in the event of a power
Outage. One POD can activate dozens of Power
Outage Lights. We are certain your Mr. Beams
Power Outage Lighting System will contribute to a
safer environment and provide light where you
need it at a very reasonable cost.
ENCLOSED YOU WILL FIND:
• Power Outage Detector & Remote
• Rechargeable 3.6V NiMH Battery
MB220 Power Outage Detector Features:
WARNING
Power-Outage Activated – Your Power Out- • RISK OF ELECTRICAL SHOCK. For
age Detector works with the MB785 and MB985
adult use only. This product is a light
Power Outage Lights and has a transmitter that
that uses 120V AC power. This product
will activate all Power Outage lights instantly
is not a toy and should not be stored or
when a power outage is detected.
used in locations accessible to children.
Flashlight– The POD has a bright LED for use
For safe use: plug into exposed wall
as a flashlight. This flashlight automatically
outlet where device is ventilated and
activates during a power Outage.
cannot contact bed coverings or other
Remote Control Feature—Your Power Outage
materials that may present a fire hazard.
Detector can control all Power Outage Lights as
Do not use with extension cords.
a remote control.
• Follow battery instructions for proper
Low Battery Indicator—The red LED on your
disposal and cautions.
light flashes when it is time to recharge batteries.
INSTALLATION INSTRUCTIONS
BEFORE YOU PLUG IN YOUR POWER OUTAGE DETECTOR (POD):
Illustration 1
Remove screw on
battery door as shown in
Illustration 1. Remove
battery door from back of
POD (Illustration 2).
Illustration 2
Illustration 3
Install Battery by inserting the
battery clip into the slot on the
POD as shown in Illustration
3. Tuck wires in, replace battery door and insert screw
(Illustration 1).
Illustration 7
OPERATION OF THE POWER OUTAGE DETECTOR (POD):
Illustration 4
Illustration 5
Illustration 6
Retract plug on POD (Illustration
4) and plug into electrical outlet
(Illustration 5). For safe use: plug
into exposed wall outlet where device is ventilated and cannot contact
bed coverings or other materials that
may present a fire hazard.
Illustration 8
In the event of a power Outage,
the POD will immediately send a
signal to turn on all Power Outage Lights. The POD will also
turn on its internal LED to serve
as a flashlight (Illustration 7).
Your POD also serves as a remote
control for all of the Power Outage
Lights. The curved button on the
top right turns all lights on
(Illustration 8).
Removing the POD from the electrical outlet
simulates a power Outage (Illustration 6).
This turns on the Flashlight and all Power Outage Lights that you have installed . Placing the
POD back into a live electrical outlet will turn
the flashlight off as well as all Power Outage
Lights.
Illustration 10
Illustration 9
The curved button on the top left of
the POD turns all lights off
(Illustration 9).
To operate the flashlight, push the
round button on the POD
(Illustration 10).
IMPORTANT NOTES:
• Auto Shut-Off Feature: If a power Outage occurs, the POD and Power Outage Lights will activate. If a button on the POD is not pressed, all lights will
turn off in 30 minutes to conserve battery life.
• For instructions on Power Outage Lights, please refer to their User Manuals.
• POD cannot charge while flashlight is on - therefore use as nightlight is not
recommended.
LIMITED WARRANTY
The product you have purchased is guaranteed against defects in workmanship and materials for the period stated on the package. Warranties implied by law are subject to the same
time period limitation. Some states do not allow limitations on how long an implied warranty lasts, so this time limitation may not apply to you. If the product fails due to a manufacturing defect during normal use, return the product and dated sales receipt to the store where purchased for replacement OR send the product and the dated sales receipt to the address
above. Not Covered – Batteries are not covered by this warranty. Repair service, adjustment and calibration due to misuse, abuse or negligence are not covered by this warranty.
Unauthorized service or modification to this product or of any furnished components will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, set-up time, loss of use, postage, unauthorized service, or other products used in conjunction with, but are not supplied by, Wireless Environment.
This warranty gives you specific legal rights, and you may also have other rights which vary.
CAUTION
Risk of Electric Shock
Dry location use only
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS
IMPORTANT SAFETY
INSTRUCTIONS
WARNING –
When using electric appliances, basic precautions should
always be followed, including the following:
a) Read all the instructions before using the appliance.
b) To reduce the risk of injury, close supervision is necessary when an appliance is used near children.
c) Do not use outdoors.
d) To reduce the risk of electrical shock, do not put the unit in water or other liquid. Do not place or
store appliance where it can fall or be pulled into a tub or sink.
SAVE THESE INSTRUCTIONS
Any Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority
to operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
For household use only.
The battery is not intended to be replaced
by user.
For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar
statement, placed in a prominent location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2011:07:13 17:10:10-04:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2011:08:12 15:40:15-07:00
Metadata Date                   : 2011:08:12 15:40:15-07:00
Document ID                     : uuid:545be9cd-40e4-43c6-afd4-36e7a5f0d40f
Instance ID                     : uuid:01010c7c-1fc6-43e3-bf0d-47a1fe18c8ca
Format                          : application/pdf
Creator                         : Owner
Title                           : MB220 Power Failure Detectorl
Has XFA                         : No
Page Count                      : 2
Author                          : Owner

EXIF Metadata provided by EXIF.tools