Wistron NeWeb SWA6 Wireless Audio Embedded Module User Manual AVMD7540 SWA6 datasheet 20100920

Wistron NeWeb Corporation Wireless Audio Embedded Module AVMD7540 SWA6 datasheet 20100920

Contents

User Manual OEM

Wistron NeWeb® Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Phone: 886-3-666-7799 Fax: 886-3-666-7711 Website: www.wneweb.com Wistron NeWeb Confidential Document 1Product Specification Model Name: AVMD7540-SWA6 (AV7540 +16dBm module with Printing Antenna) Revision: 1.0 Issue Date: 2010/09/20 This document and the information contained herein is the property of Wistron NeWeb Corporation and reproduction by any means (including, but not limited to, xerographic, chemical, electronic) and distribution is expressly prohibited without prior written consent from Wistron NeWeb Corporation. The document and information contained herein are confidential and may not be divulged without express written consent from Wistron NeWeb Corporation, located at 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Copyright 2010 by Wistron NeWeb Corporation / All rights reserved.
Wistron NeWeb® Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Phone: 886-3-666-7799 Fax: 886-3-666-7711 Website: www.wneweb.com Wistron NeWeb Confidential Document 2 Revision History Edition # Reason for revision Issue date Author 0.1 Draft (Initial Revision) 2010/07/23 Amy Tu 1.0 Add FCC Descripti 2010/9/20 Amy Tu
Wistron NeWeb® Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Phone: 886-3-666-7799 Fax: 886-3-666-7711 Website: www.wneweb.com Wistron NeWeb Confidential Document 31. General Description The AVMD7540-SWA6 module is a complete radio module solution containing all the necessary HW and FW to provide a system-integration ready, multichannel wireless HD audio solution. The module is comprised of a AV7540 IC combined with RF front-end circuits (RF PA + balun + filter + RF switch), flash memory, crystal, and passive components. The module provides a convenient set of digital I/O interfaces for digital audio through an I2S port, host MCU control through an SPI or I2C interface and optional GPIO for various control and indicator functions. The module is a card edge style using the 36 pin PCIe card edge connection method to save space and cost in connecting to the main board. FCC & IC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the exemption from the routine evaluation limits in section 2.5 of RSS 102. 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters from user and bystanders. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
Wistron NeWeb® Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Phone: 886-3-666-7799 Fax: 886-3-666-7711 Website: www.wneweb.com Wistron NeWeb Confidential Document 42. Features  Complete, Integrated Wireless Module o AV7540 IC o RF front-end o Flash memory  High Performance Audio and RF solution o 16 bit, 48kHz to 24 bit, 96kHz digital audio o 120dB SNR Digital Audio Path o Fixed Low Latency solution o +16dBm transmit RF output power o -82dBm receive RF sensitivity o Support for 30m/100m range NLOS/LOS  Digital interfaces and Audio o 8 channel digital audio I/O (4 I2S ports)  Configurable as input or output o Stereo audio DAC output o 4-wire SPI slave interface or 2-wire I2C-compatible communication with the host MCU  Package and connections o Compact size o 36 pin (2x18) PCIe card edge connector o diversity antenna capability
Wistron NeWeb® Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Phone: 886-3-666-7799 Fax: 886-3-666-7711 Website: www.wneweb.com Wistron NeWeb Confidential Document 5 3. Block Diagram / 4. Module Outline
Wistron NeWeb® Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Phone: 886-3-666-7799 Fax: 886-3-666-7711 Website: www.wneweb.com Wistron NeWeb Confidential Document 65. Pin Configuration and Definition Figure 1-1 – AVMD7540-SWA6 module pin configuration
Wistron NeWeb® Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Phone: 886-3-666-7799 Fax: 886-3-666-7711 Website: www.wneweb.com Wistron NeWeb Confidential Document 7Table ᙑᎄ! ࢬ ਐ ࡳ ऱ ᑌ ڤ ऱ ֮ ڗ լ ژ ڇ ֮ ٙ խ Ζ-1 AVMD7540-SWA6 pin description # Pin Name Pin Type Description A1 GND Analog Module ground A2 GND Analog Module ground A3 WCLK2 Digital I/O I2S Word clock, AV75xx physical I2S I/O # 2 – input/output A4 BCLK2 Digital I/O I2S Bit clock, AV75xx physical I2S I/O # 2 – input/output A5 ADAT2 Digital I/O I2S audio data, AV75xx physical I2S I/O #2 – input/output A6 WCLK0 Digital I/O I2S Word clock, AV75xx physical I2S I/O # 0 – input/output A7 BCLK0 Digital I/O I2S Bit clock, AV75xx physical I2S I/O # 0 – input/output A8 ADAT0 Digital I/O I2S audio data, AV75xx physical I2S I/O # 0 – input/output A9 SPI/TWI_SEL Digital I/O SPI / TWI interface selection (SPI = 0, TWI = 1) A10 GPIO6 Digital I/O GPIO #6 A11 GPIO4 Digital I/O GPIO #4 A12 GPIO3 Digital I/O GPIO #3 A13 GPIO5 Digital I/O GPIO #5 A14 reserved Digital I/O reserved A15 AGND Analog Audio ground A16 ROUT Analog Audio DAC right channel output A17 LOUT Analog Audio DAC left channel output A18 AGND Analog Audio ground B1 VCC Analog +5V supply voltage input B2 VCC Analog +5V supply voltage input B3 ADAT3 Digital I/O I2S audio data, AV75xx physical I2S I/O # 3 – input/output B4 BCLK3 Digital I/O I2S Bit clock, AV75xx physical I2S I/O # 3 – input/output B5 WCLK3 Digital I/O I2S Word clock, AV75xx physical I2S I/O # 3 – input/output B6 MCLK_OUT Digital Output MCLK for I2S audio data B7 ADAT1 Digital I/O I2S audio data, AV75xx physical I2S I/O # 1 – input/output B8 BCLK1 Digital I/O I2S Bit clock, AV75xx physical I2S I/O # 1 – input/output B9 WCLK1 Digital I/O I2S Word clock, AV75xx physical I2S I/O # 1 – input/output B10 SDA Digital I/O I2C compatible serial data I/O B11 SCL Digital I/O I2C compatible serial clock I/O B12 S_SSB Digital I/O SPI Slave – slave select (active low) B13 S_SCLK Digital I/O SPI Slave – serial clock B14 S_MOSI Digital I/O SPI Slave – master out slave in B15 S_MISO Digital I/O SPI Slave – master in slave out B16 SRQ/PND Digital Output Notification signal to host (pending notification) B17 SM0 Digital Input Serial Mux control (for flash programming) and module reset (active low)
Wistron NeWeb® Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Phone: 886-3-666-7799 Fax: 886-3-666-7711 Website: www.wneweb.com Wistron NeWeb Confidential Document 86. Electrical Specifications 6.1. Absolute Maximum Ratings The Absolute Maximum Rating (AMR) corresponds to the maximum value that can be applied without leading to instantaneous or very short-term unrecoverable hard failure (destructive breakdown). Absolute Maximum Ratings are stress ratings only. Permanent damage to the device may be caused by continuously operating at or beyond these limits. Device functional operating limits and guaranteed performance specifications are given under Electrical Characteristics at the test conditions specified. Table 6-1 6-2 AVMD7540-SWA6 Absolute Maximum Ratings CONDITION MIN MAX Units Supply (relative to GND) +5V -0.3 6.0 V Input Voltage Range – Digital Inputs -0.3 3.6V V Short circuit to GND (any pin) --- continuous Storage Temperature -40 +100 ºC Lead Temperature (10s) -- +225 ºC ESD Voltage Rating – Human Body Model test 2000 V
Wistron NeWeb® Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Phone: 886-3-666-7799 Fax: 886-3-666-7711 Website: www.wneweb.com Wistron NeWeb Confidential Document 96.2. DC Electrical Characteristics Operating Conditions: +5V_IN = 5.0V ±10%, TA=0ºC to +50 ºC; RF Chan. Freq. = 2412MHz to 2462MHz. All specifications are referenced to the AVMD7540-SWA6 edge connector pins and RF connectors, unless otherwise specified. Typical specifications at 5.0V and 25 ºC. Table 6-2 6-3 AVMD7540-SWA6 DC Electrical Characteristics PARAMETER CONDITIONS MIN TYP MAX UNIT Input supply voltage Driven by an external regulator 4.5 5.5 V Supply Current – (Note 1) RESET 10 mA RX mode: 1 stereo output I2S 100 mA CMOS I/O Logic Levels – 3.3V I/O Input Voltage Logic Low, VIL Internal regulator = 3.3V 0.6 V Input Voltage Logic High, VIH Internal regulator = 3.3V 2.0 V Output Voltage Logic Low, VOL Internal regulator = 3.3V; ILOAD=1mA 0.4 V Output Voltage Logic High, VOH Internal regulator = 3.3V; ILOAD=1mA 2.9 V Note 1: The operating states are defined as: RESET = AVMD7540-SWA6 is held in reset by holding SM0 low RX mode: AVMD7540-SWA6 is operating in a link as a client node receiving 1 stereo channel of 16bit, 48kHz audio. 6.3. Electrical Characteristics – RF Receiver Operating Conditions: +5V_IN = 5.0V ±10%, TA=0ºC to +50 ºC; RF Chan. Freq. = 2412MHz to 2462MHz. All specifications are referenced to the AVMD7540-SWA6 edge connector pins and RF connectors, unless otherwise specified. Typical specifications at 5.0V and 25 ºC. Table 6-3 -4 AVMD7540-SWA6 Electrical Characteristics – RF Receiver PARAMETER CONDITIONS MIN TYP MAX UNIT RF Channel Frequency Range 2412 2462 MHz Sensitivity (Note 1) TA=25ºC -80 dBm Max Input Signal (Note 1) -5 dBm Spurious RF outputs 2400-2483.5 MHz <2400 MHz >2483.5 MHz -47 -60 -60 dBm dBm dBm LO leakage -47 dBm Note 1: Sensitivity and max signal level are defined as the onset of 1% BLER Block Error Rate.
Wistron NeWeb® Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Phone: 886-3-666-7799 Fax: 886-3-666-7711 Website: www.wneweb.com Wistron NeWeb Confidential Document 106.4. Electrical Characteristics – RF Transmitter Operating Conditions: +5V_IN = 5.0V ±10%, TA=0ºC to +50 ºC; RF Chan. Freq. = 2412MHz to 2462MHz. All specifications are referenced to the AVMD7540-SWA6 edge connector pins and RF connectors, unless otherwise specified. Typical specifications at 5.0V and 25 ºC. Table 6-5 -5 AVMD7540-SWA6 Electrical Characteristics – RF Transmitter PARAMETER CONDITIONS MIN TYP MAX UNIT RF Performance RF Channel Frequency Range 2412 2462 MHz Output Power TA=25ºC, OFDM signal, 16MHz channel BW +16 dBm Harmonics (Note 1) 2nd harmonic 3rd harmonic -45 -45 dBm dBm Conducted RF Spurious signals 800-1000MHz 2000-2390MHz 2483.5- 3000MHz; RBW=1MHz 3000-4000MHz ; RBW=1MHz 4.0-26.5GHz; RBW=1MHz -45 -45 -45 dBm dBm dBm Radiated Spurious RF signals 30-88MHz, 88-216MHz 216-960MHz >960MHz 34 37 40 48 dBuV/m dBuV/m dBuV/m dBuV/m LO leakage Relative to power in a 100kHz BW **, after DC offset correction -20 dBc Note 1: Measured at TX output power = +16dBm Note 1: Measured at TX output power = +16dBm 6.5. Electrical Characteristics – RF Channel Frequency Operating Conditions: +5V_IN = 5.0V ±10%, TA=0ºC to +50 ºC; RF Chan. Freq. = 2412MHz to 2462MHz. All specifications are referenced to the AVMD7540-SWA6 edge connector pins and RF connectors, unless otherwise specified. Typical specifications at 5.0V and 25 ºC. Table 6-5 -6 AVMD7540-SWA6 Electrical Characteristics – RF Transmitter PARAMETER CONDITIONS MIN TYP MAX UNIT RF Performance Channel Frequency AM2G system channel 1 AM2G system channel 2 AM2G system channel 3 2412 2438 2462 MHz MHz MHz
Wistron NeWeb® Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Phone: 886-3-666-7799 Fax: 886-3-666-7711 Website: www.wneweb.com Wistron NeWeb Confidential Document 11PARAMETER CONDITIONS MIN TYP MAX UNIT Frequency Error 16MHz crystal +/- 20 ppm
Wistron NeWeb® Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Phone: 886-3-666-7799 Fax: 886-3-666-7711 Website: www.wneweb.com Wistron NeWeb Confidential Document 126.6. Electrical Characteristics – End-to-end Audio Characteristics Operating Conditions: +5V_IN = 5.0V ±10%, TA=0ºC to +50 ºC; RF Chan. Freq. = 2412MHz to 2462MHz. All specifications are referenced to the AVMD7540-SWA6 edge connector pins and RF connectors, unless otherwise specified. Typical specifications at 5.0V and 25 ºC. Table 6-6 -7 AVMD7540-SWA6 Electrical Characteristics – End-to-end Audio Characteristics PARAMETER CONDITIONS MIN TYP MAX UNITS End-to-end SNR I2S in to I2S out, no interference; 16bit / 48kHz mode 24bit / 48kHz mode 16bit / 96kHz mode 24bit / 96kHz mode 96 120 97 120 dB dB dB dB Latency 48kHz, interleaving level = 0 48kHz, interleaving level = 1 48kHz, interleaving level = 2 11 15 19 ms ms ms Bandwidth +/-0.5dB flatness, 48Khz modes +/-0.5dB flatness, 96Khz modes 20 20 20k 40k Hz Hz 6.7. Electrical Characteristics – MCLK Characteristics Operating Conditions: +5V_IN = 5.0V ±10%, TA=0ºC to +50 ºC; RF Chan. Freq. = 2412MHz to 2462MHz. All specifications are referenced to the AVMD7540-SWA6 edge connector pins and RF connectors, unless otherwise specified. Typical specifications at 5.0V and 25 ºC. Table 6-7 AVMD7540-SWA6 Electrical Characteristics – MCLK Characteristics PARAMETER CONDITIONS MIN TYP MAX UNITS MCLK frequency “24MHz” mode (256MHz divide by 10.5) “12MHz” mode (256MHz divide by 21) 24.38 12.19 MHz MHz MCLK output duty cycle 40 60 %
Wistron NeWeb® Wistron NeWeb Corporation 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Phone: 886-3-666-7799 Fax: 886-3-666-7711 Website: www.wneweb.com Wistron NeWeb Confidential Document 137. Package Information
To OEM installer: 1a. FCC ID label on the final system must be labeled with "Contains FCC ID: NKR-SWA6" or "Contains transmitter module FCC ID: NKR-SWA6". 1b. IC Canada label on the final system must be labeled with “Contains Module WNC SWA6 IC: 4441A-SWA6” 2.In the user manual, final system integrator must be ensured that there is no instruction provided in the user manual to install or remove the transmitter module. 3. Transmitter module must be installed and used in strict accordance with the manufacturer is instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards. 4. To inherit the modular approval, the antennas for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The user manual of the final host system must contain the following statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating to conjunction with any other antenna or transmitter.

Navigation menu