Wistron BT3 BT module User Manual

Wistron Corporation BT module

User Manual

CONFIDENTIALWistron CorporationPRODUCT SPECIFICATIONMODEL BlueSlim2PRODUCT DESCRIPTION Bluetooth USB module compliant with BT2.1+EDR / 3.0+HS / 4.0 and LETYPE 6pin connectorDIMENSION 6.5mm*30mm*2mmMAIN CHIPSET CSR8510A10Revision: V0.93
   COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.REVISION HISTORYRevision Issue Date Change Note0.90 Aug.28, 2014 Preliminary release0.91 Sep.01, 2014 Correct Chapter 3.4 pin assignment: pin5,6 are unused.0.92 Mar.19, 2015 Correct Q’TY/TRAY.0.93 Jan.23, 2017 Add Halogen free/ROHS compliance.Software ver: to be confirmed.
   COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.TABLE OF CONTENTS1. INTRODUCTION 1.1 APPEARANCE 1.2 BLOCK DIAGRAM2. FEATURES3. SPECIFICATIONS 3.1 GENERAL SPECIFICATIONS3.2 ELECTRICAL CHARACTERISTICS3.3 POWER MEASUREMENT 3.4 MODULE PIN ASSIGNMENT 3.5 Module Dimension3.6 ENVIRONMENTAL 3.7 SOFTWARE 3.8 FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT 4. PACKAGE 
   COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.1. INTRODUCTIONBlueSlim2 is a USB Bluetooth module from official CSR reference design; it is fully compatible with theBluetooth v3.0 + High Speed and Bluetooth v4.0 standards, offering high-speed data transfer and Bluetooth lowenergy for PC products. Through products based on BlueSlim2, consumers can take full advantage of theBluetooth low energy ecosphere, connecting peripherals such as mice and keyboards and benefiting fromBluetooth low energy’s enormous power efficiency.BlueSlim2 utilizes USB, the dominant standard interface for most PC platforms, so it can be easily connected toa vast range of PC devices. The applications can be Laptops, Tablet, All-in-one, digital TV, set-top box, andversatility of consumer products.1.1 APPEARANCETop view Bottom view1.2 BLOCK DIAGRAM2. FEATURES6 pin connector.HCI mode operation with USB2.0 full speed (12Mbps).Fully qualified Bluetooth® spec v2.1/2.1+EDR/3.0/3.0+HS/4.0, and LE.Dual-mode Bluetooth/Bluetooth Low Energy operation.Support for Bluetooth basic rate / EDR and low energy connection.
   COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.Powered by +3.3V.Onboard Printed antenna.Class1, Class2, Class3 supported.Measured Max. TX output power up to 6dBm, max. distance range 30 meters (Class1).Halogen free / ROHS compliance.3. SPECIFICATIONS3.1 GENERAL SPECIFICATIONSModel Name BlueSlim2Main Chipset BlueCore® CSR8510A10EEPROM 32KbitStandard Bluetooth spec v2.1, v2.1+EDR, v3.0, v3.0+HS, v4.0, LE(Low Energy)Bus Interface USB2.0 full speedConnector 6 pins,pitch=0.6ACES (5037600601001) 1*6 P=0.6mm R/A SMD HF ,or equivalent.Antenna Printed antennaShielding case YesDimensions (L*W*H) 6.5mm*30mm*2mmSurface mount single side Surface MountOperating voltage 3.3 V ±10%
   COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.Integrated linear regulators:USB: USB bus supply to 3.3VHigh-voltage: 2.3V to 4.8V input to 1.85VLow-voltage: VDD_DIG, VDD_RADIO andVDD_AUX regulatorsPower-on-reset cell detects low supply voltageArbitrary sequencing of power supplies is permitted3.2 ELECTRICAL CHARACTERISTICSFrequency Range 2.402GHz to 2.480GHz, ISM bandRadio Technology FHSS (Frequency Hopping Speed Spectrum)Basic Data Rate 1Mbps (GFSK)Enhanced Data Rate 2Mbps (DQPSK); 3Mbps (8-DPSK)Channel Number 79 Channels, 1MHz bandwidth3.3 POWER MEASUREMENTSupply voltage +3,3V (Min. 3.0V; Max. 3.6V)Continuous TX supply current 57mAContinuous RX supply current 46mABluetooth Power ON (RF off) 14mA
   COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.3.4 MODULE PIN ASSIGNMENTPIN1VCC 3.3V2GND3USB D+4USB D-5Reserved; unused.6Reserved; unused.3.5 Module DimensionBlueSlim2 Length Width HeightPCB Dimension 6.5mm (±1.5%) 30mm (±1.5%) 0.8mm (±1.5%)ModuleDimension6.5mm (±1.5%) 30mm (±1.5%) Max. height ofShielding CaseTOP 1.15mmBOTTOM 0Total height = 2mm (Max. 2mm)3.6 ENVIRONMENTALOperating Operating Temperature: 0°C to +70 °CRelative Humidity: 5-90% (non-condensing)Storage Temperature: -20°C to +85°C (non-operating)Relative Humidity: 5-95% (non-condensing)
   COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.3.7 SOFTWAREOS supported: Linux / Android/ WindowsBT Stack: Please check the 3rd-party BT software utility or what stack which your OS has supported.3.8 FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.15.105(b)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 ofthe FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to tryto correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:1) this device may not cause harmful interference and2) this device must accept any interference received, including interference that may cause undesired operation of thedevice.FCC RF Radiation Exposure Statement:
   COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.End Product LabelingThis transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users.The final end product must be labeled in a visible area with the following: “Contains FCC ID: PU5BT3”Manual Information To the End UserThe OEM integrator has to be aware not to provide information to the end user regarding how to install or remove thisRF module in the user’s manual of the end product which integrates this module.The end user manual shall include all required regulatory information/warming as shown in this manual.The end product may also subject to fulfill FCC part 15B (un-intentional emission) requirement while module is beinginstalled.3.10 根據 NCC 低功率電波輻射性電機管理辦法規定第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。此模組於取得認證後將依規定於模組本體標示審驗合格標籤，並要求平台廠商於平台上標示。「本產品內含射頻模組：ID 編號 XXXXX」字樣 3.9 IC StatementThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: ．This device may not cause interference ．This device must accept any interference, including interference that may cause undesired operation of the deviceLe présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes: ．l'appareil ne doit pas produire de brouillage, et ．l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.Caution: Exposure to Radio Frequency Radiation.To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons.Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d'au moins 20 cm doit être maintenue entre l'antenne de cet appareil et toutes les personnes.End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains IC: 4182A-Z01C"
   COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.4. PACKAGETRAY SPECIFICATION Dimension: 331*137*97mmCARTON SPECIFICATION Dimension: 350*143*77mmQ’TY/TRAY 800pcs/16+1 tray ,TOTAL: 800pcs /Carton

Navigation menu