Wonde Proud Technology WPBT55S BLUETOOTH GPS RECEIVER User Manual USERS MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	658978
Application ID	za0L47B6Wl7Z8NIDIfAhsg==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	55.69kB (696122 bits)
Date Submitted	2006-05-17 00:00:00
Date Available	2006-05-17 00:00:00
Creation Date	2005-07-22 09:08:33
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2006-04-27 14:33:57
Document Title	USERS MANUAL

*** USER’S MANUAL ***
FCC ID : SRKWPBT55S
The Federal Communication Commission Statement
This equipment has been tested and found to comply with the limits for a Class B Digital Device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction, may
cause harmful interference to radio communication.
However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of more of the following
measures: -
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced Radio/TV technician for help.
Use only shielded cables to connect I/O devices to this equipment. You are cautioned that change
or modifications not expressly approved by the party responsible for compliance could void your
authority to operate the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERECE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
1.
This device may not cause harmful interference and
2. This device must accept any interference received, including interference that may cause
undesired operation.
GPS-BT55S
GPS BT-55S
User’s Guide
User’s Guide
GPS BT-55S
User’s Guide
Table of Contents
1.
2.
3.
4.
5.
6.
Read Me First………………………………………………………………………………….. p.3
Box Contents…………………………………………………………………………………… p.3
Getting Started…………………………………………………………………………………. p.3
Hardware Description…………………………………………………………………………. p.7
LED Indicator…………………………………………………………………………………... p.8
Specification……………………………………………………………………………………. p.9
GPS BT-55S
User’s Guide
1. Read Me First
1. The battery must be charged for at least 8 hours for the ‘INITIAL’ use. The LED2 (ORANGE) will turn
off after 3 hours’ charging, please keep on charging for 5 more hours. Thereafter, for each time’s
battery charging please fully charge for 3 hours.
2. We strongly recommend that remove the battery if the device will not be used for over 2 weeks. Do
not remove the battery within 2 weeks.
3. For fast data tracking purpose staying still before get fixed is recommended. (FIX then GOES!!)
4. Please note that the device will only receive the signal under the open sky. In this case, putting the
device under the windshield is recommended.
2. Box Contents
1.
2.
3.
4.
5.
GPS Bluetooth receiver
Lithium-ion rechargeable battery
Car charger
Power adapter
Document CD
3. Getting Started
1. Install the battery
2. Turn on the GPS Bluetooth receiver.
Press the power button for 3 seconds or until the LED1 (GPS Fix Status) turns into RED and LED2
(Bluetooth Status) turns into Blue.
3. Activate Bluetooth function of your PDA / PC
Prior to activating the Bluetooth function of your PDA / PC, please make sure the device is equipped
with Bluetooth function, and the driver software has been installed.
4. Activate Bluetooth Manager & Established New Connections.
Illustrations using HP 2100 PDA as follows:
1.
2.
3.
4.
First, find the device with which you wish to establish connection.
Open “Bluetooth Manager” on your pocket PC.
Press “New”.
Press "Connect”.
GPS BT-55S
User’s Guide
BTGPS
Click here
Click here to select
installation
GPS BT-55S
User’s Guide
BTGPS
****
Enter Pass Key "0000",
then Press “Enter”
Enter key
BTGPS
BTGPS
Click
here
Click
here
GPS BT-55S
User’s Guide
Connection
established
BTGPS: SPP slave
The connection between GPS Bluetooth receiver and PDA has been successfully established
5. Turn off the GPS Bluetooth receiver
Press the power button for 3 seconds, all LEDs will goes off.
We recommend that close the E-map before turning off the GPS Bluetooth receiver, in order to
avoid any possible PDA /PC freeze.
GPS BT-55S
User’s Guide
4. Hardware Description
Power Button
LED1: GPS Fix Status
LED2: Bluetooth Status
Charge Socket
Slip-resistant
Slip-resistant
Push here to open
Push here to open
GPS BT-55S
User’s Guide
5. LED Indicator
Power on:
LED1: GPS Fix Status
LED2: Bluetooth Status
Red (ON)
GPS not fixed yet!
Blue (ON)
Blinking for every 3 seconds (in paring mode)
GPS get fixed/Bluetooth connected:
LED1: GPS Fix Status
LED2: Bluetooth Status
Red
Blinking for every 1 seconds
Blue
Blinking quickly
Low battery: LED1 (GREEN) blinking for every 1 second
Charging: LED2 (ORANGE) ON
Battery is fully charged: LED2 (ORANGE) turns off
Charging: LED2
(ORANGE) ON
GPS Bluetooth operates on OS with Bluetooth function that supports SPP
In order to avoid any unexpected problem,
DO NOT attempt to change the default baudrate
GPS BT-55S
User’s Guide
6. Specification
GPS Features
Datum
Chipset
SiRF Star III
WGS-84
Frequency
L1, 1575.42MHz
Dynamic Conditions
C/A Code
1.023MHz chip rate
Altitude
<18,000m (60,000feet)
Channels
Supports 20 channels
Velocity
<515m/s (1000 knots)
Antenna (Internal)
Built-in low noise antenna
Acceleration
<4G
Motional Jerk
20m/sec3 max.
Sensitivity
Interface
To – 159dBm Tracking, Superior Urban Canyon Performance
Communication Protocol: Communicate with host platform
Time to First Fix (TTFF)
via Bluetooth (class 2) serial port profile
Cold Start
42 sec, average
Bluetooth communication distance 10meters (Typical)
Warm Start
38 sec, average
GPS Protocol: Default: NMEA-0183 - GGA, GSA, GSV, RMC
Hot Start
1 sec, average
Data bit: 8, stop bit: 1(Default)
Reacquisition
0.1 sec
Update rate
1 Hz (max.)
Accuracy
Device Size and Weight
Position
5 – 25m CEP without SA
61.5 (L) X 43.5 (W) X 20.5 (H) mm
Velocity
0.1m/sec, without SA
2.42 (L) X 1.71 (W) X 0.80 (H) inch
Time
1μs synchronized to GPS time
51.4g (battery included)
Power
Accessories
Built-in rechargeable 710mAh Li-ion battery and 5V DC input
Car charger (12V in, 5V output)
Operation Current
<75mA (Typical)
AC adaptor (5.3V output, 500mA)
Operation Time
10hrs, fully charged, in continuous mode
Charging time
3.0hrs. (Typical)
Environmental Characteristics
Operating Temperature - 10°C to + 60°C
Storage Temperature
- 20°C to + 85°C

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2005:07:22 09:08:33Z
Modify Date                     : 2006:04:27 14:33:57+08:00
Page Count                      : 11
Creation Date                   : 2005:07:22 09:08:33Z
Mod Date                        : 2006:04:27 14:33:57+08:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Metadata Date                   : 2006:04:27 14:33:57+08:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools