Wonders Technology 1003 Wireless Portable Bluetooth Speaker User Manual DS 1003

Wonders Technology Co., Ltd. Wireless Portable Bluetooth Speaker DS 1003

user manual

Wireless Portable Bluetooth SpeakerMode No.: DOSS SoundBox xsUser Manual Status indicatorsPackage contentProduct overview6. Long press to turn the device on and off.7. Auxiliary Φ3.5mm jackdevices.8. TF card: Use it for TF card (with music) playback. support mp3,wav that to FAT32 or FAT.9. Charging port: Plug the supplied USB cable into this port to recharge 10. LED charging indicator.• Charging : Steady Red.• Fully charged : Light OffThank you for purchasing the DOSS SoundBox xs Wireless Portable Bluetooth Speakerwireless portable speaker.• One wireless portable speaker• USB charging cable• Φ3.5mm auxiliary cable• User manual1. Mode switch: Touch to toggle play mode among Bluetooth, 2. In Bluetooth mode/TF mode, touch to skip backward.3. • In Bluetooth mode,touch to answer or end a call. Touch for 3 seconds to reject a call.• In Bluetooth mode, touch to play/pause your tune. Touch for 3 seconds to disconnect with your device, and touch again to • In TF mode, touch to play/pause your tune.4. In Bluetooth mode/TF mode, touch to skip forward.5. Volume control: Center indicator/indicatorFlashing blue Steady blue Steady redLight OffIndicates that the speaker has entered into the pairing mode and it is ready to be pairedIndicates that the device is successfully pairedSteady red Steady GreenIndicates that the device has switched to the auxiliary input modeIndicates that the device has switched to the TF mode 正反面印刷 SIZE：95 X 148NN126 7 8 910354Product type: Wireless Portable Bluetooth Speaker with Built-in MicrophoneOutput power: 5W x 2Driver unit: 1.6 inch speaker x 1 + 1.6*2.9 inch passive radiatorFrequency response: 90Hz-15kHzUnit weight: 270 gUnit dimension: 5.2 x 2.8 x 2.7 inchWarranty: One-year limitedPowerWarningWireless/Networking• Input:5V 1A Bluetooth versions: Bluetooth V4.0• Profiles supported• Do NOT drop, hit or shake the device.• Do NOT disassemble, repair or modify the Bluetooth speaker by yourself.• Do NOT use cleaning products that contain benzene, solvents or alcohol.• Do NOT expose the Bluetooth speaker to excessive heat or to direct • Do NOT store the device in a place with high humidity or dust.• Do NOT place heavy objects on top of the Bluetooth speaker.• Do NOT use near a microwave oven or wireless LAN products.Wonders Technology Co.,LtdEmail: Support@dossav.comFollow us on Facebook: Website: www.dossaudio.comBluetoothProblemTF CardotherCannot Pair with Bluetooth devices seconds,then have a try to pair it againPlease select 'DOSS SoundBox xs' as the default playback deviceThe song cuts off during playbackPlease check if the Bluetooth distance is more than 33 feet or There is noise during playback Maybe caused by the interference of charging,try to put it in another place and do not charge it during playbackLaptop prompts to install driver This driver is not special for SoundBox xs,it's for your laptop contact the computer company or windowsThe speaker do not play when the card is inserted,and jump directly back to Bluetooth modeCheck whether the card format is FAT or FAT32. If not, format it to FAT or FAT32.Check the song format. The speaker only supports MP3, WAVThe song cuts off during playbackCustomer Service Email support@dossav.comThere may be a problem with the the same filefor 5 seconds or contact with the for help3. Speak with a clear voice right into the built-in microphone located on may also end the call directly using the command on your cell phone.5. When listening to music using your smart phone, playback will resume call using the speaker.Using it with your Echo DotNote:Download the Alexa APP, follow the standard setup procedure to get the dot connected to your home Wi-Fi network.1.Switch the SoundBox xs speaker to Bluetooth mode,you can press the 2.3.Tap the Echo Dot in your list of Alexa Devices, then tap Bluetooth.4.The SoundBox xs speaker should appear in the list of Bluetooth Devices. listed, tap on The SoundBox xs speaker to complete the pairing process. To remove the device, return to Bluetooth -> tap the name of the speaker -> then tap "Forget Device". 5.Voice command will not be able to turn on/off the SoundBox xs no only translate sound signal. Pairing the wireless speaker with your smart deviceAnswering and ending a call using your speaker or mobile phone• Use the supplied USB cable to charge your portable speaker directly from your computer micro USB port or the cellphone adapter(please confirm its output is 5V)• Make sure that the speaker is fully charged before using it for the 1. When there is an incoming call, the speaker will generate a tone and steps to turn the device off as well. LED light will remain RED when charging and turn off once charge completes. 1. Place your smart device and wireless speaker no more than one meter away from each other. seconds to turn it on.3. Set your smart device to “discover” the wireless speaker. Upon powering on, a tone will be heard, the blue LED will start flashing, the pairing mode.4. Enabled Bluetooth on your device and choose DOSS SoundBox xs fromthe list.5. If pairing is successful, the LED will change to steady blue and your for 5 seconds and have a try again. Note: If your smart device cannot discover the SoundBox xs,long press the and have a try again.You can connect the Dot with the speaker using a 3.5 mm auxin cable or Bluetooth. Please use the following steps to set up using Bluetooth: 6018Using the 3.5mm Audio Input1. Plug one end of a 3.5mm Audio cable into the unit.The mode indicator light will display a red light. 2. Plug the other end of the 3.5mm Audio cable into other audio devices. 3. Turn on the speaker, it will play music from the audio device. 4. If you want to Play/pause the tune,or change Previous/Next tune just control the nave buutons on your audio device. reconnect your device.FCC Statement:This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation.This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.—Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter.

Navigation menu