Wonders Technology 1003 Wireless Portable Bluetooth Speaker User Manual DS 1003

Download:
Mirror Download [FCC.gov]
Document ID	3434906
Application ID	za9RmV+L33JaMofDEtmHxw==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	122.63kB (1532930 bits)
Date Submitted	2017-06-22 00:00:00
Date Available	2017-06-22 00:00:00
Creation Date	2017-05-18 17:48:31
Producing Software	Adobe PDF library 10.01
Document Lastmod	2017-06-21 19:00:47
Document Title	DS-1003 说明书 打样
Document Creator	Adobe Illustrator CS6 (Windows)
Document Author:	Administrator

SIZE：95 X 148NN
正反面印刷
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Thank you for purchasing the DOSS SoundBox xs Wireless Portable Bluetooth
Speaker
wireless portable speaker.
Package content
Wireless Portable Bluetooth Speaker
• One wireless portable speaker
• USB charging cable
• Φ3.5mm auxiliary cable
• User manual
10
6.
Long press
to turn the device on and off.
7. Auxiliary Φ3.5mm jack
devices.
8. TF card: Use it for TF card (with music) playback. support mp3,wav
Product overview
that to FAT32 or FAT.
9. Charging port: Plug the supplied USB cable into this port to recharge
10. LED charging indicator.
• Charging : Steady Red.
• Fully charged : Light Off
Status indicators
1. Mode switch: Touch
Mode No.: DOSS SoundBox xs
User Manual
to toggle play mode among Bluetooth,
2. In Bluetooth mode/TF mode, touch
to skip backward.
3.
• In Bluetooth mode,touch
to answer or end a call. Touch for 3
seconds to reject a call.
• In Bluetooth mode, touch
to play/pause your tune. Touch for 3
seconds to disconnect with your device, and touch
again to
reconnect your device.
• In TF mode, touch
to play/pause your tune.
4. In Bluetooth mode/TF mode, touch
to skip forward.
5. Volume control:
Center indicator/
Flashing blue
Indicates that the speaker
has entered into the pairing
mode and it is ready to be
paired
Steady blue
Indicates that the device is
successfully paired
Steady red
Indicates that the device has
switched to the auxiliary
input mode
Steady Green
Indicates that the device has
switched to the TF mode
Steady red
indicator
Light Off
• Use the supplied USB cable to charge your portable speaker directly
from your computer micro USB port or the cellphone adapter(please
confirm its output is 5V)
• Make sure that the speaker is fully charged before using it for the
LED light will remain RED when charging and turn off once charge
completes.
steps to turn the device off as well.
Pairing the wireless speaker with your smart device
1. When there is an incoming call, the speaker will generate a tone and
seconds to turn it on.
3. Set your smart device to “discover” the wireless speaker. Upon
powering on, a tone will be heard, the blue LED will start flashing,
You can connect the Dot with the speaker using a 3.5 mm auxin cable
or Bluetooth. Please use the following steps to set up using Bluetooth:
1. Download the Alexa APP, follow the standard setup procedure to
get the dot connected to your home Wi-Fi network.
Note: If your smart device cannot discover the SoundBox xs,long press the
and have a try again.
Using the 3.5mm Audio Input
1. Plug one end of a 3.5mm Audio cable into the unit.The mode indicator
light will display a red light.
2. Plug the other end of the 3.5mm Audio cable into other audio devices.
3. Turn on the speaker, it will play music from the audio device.
4. If you want to Play/pause the tune,or change Previous/Next tune just
control the native buutons on your audio device.
Bluetooth
Cannot Pair with Bluetooth
devices
seconds,then have a try to pair it
again
Please select 'DOSS SoundBox xs' as
the default playback device
The song cuts off during
playback
may also end the call directly using the command on your cell phone.
5. When listening to music using your smart phone, playback will resume
Using it with your Echo Dot
the pairing mode.
4. Enabled Bluetooth on your device and choose DOSS SoundBox xs from
the list.
5. If pairing is successful, the LED will change to steady blue and your
Problem
call using the speaker.
3. Speak with a clear voice right into the built-in microphone located on
1. Place your smart device and wireless speaker no more than one meter
away from each other.
for 5 seconds and have a try again.
Wonders Technology Co.,Ltd
Email: Support@dossav.com
Website: www.dossaudio.com
Follow us on Facebook:
Answering and ending a call using your speaker or mobile
phone
Please check if the Bluetooth
distance is more than 33 feet or
There is noise during playback
Maybe caused by the
interference of charging,try to
put it in another place and do not
charge it during playback
Laptop prompts to install driver
This driver is not special for
SoundBox xs,it's for your laptop
contact the computer company
or windows
2. Switch the SoundBox xs speaker to Bluetooth mode,you can press the
for 5 seconds or contact with the
3.
4. Tap the Echo Dot in your list of Alexa Devices, then tap Bluetooth.
5. The SoundBox xs speaker should appear in the list of Bluetooth Devices.
for help
TF Card
listed, tap on The SoundBox xs speaker to complete the pairing process.
To remove the device, return to Bluetooth -> tap the name of the
speaker -> then tap "Forget Device".
Note:
Voice command will not be able to turn on/off the SoundBox xs no
only translate sound signal.
The speaker do not play when
the card is inserted,and jump
directly back to Bluetooth
mode
Check whether the card format is FAT
or FAT32. If not, format it to FAT or
FAT32.
Check the song format. The speaker
only supports MP3, WAV
The song cuts off during
playback
There may be a problem with the
the same file
other
Customer Service Email
support@dossav.com
Product type: Wireless Portable Bluetooth Speaker with Built-in
Microphone
Output power: 5W x 2
Driver unit: 1.6 inch speaker x 1 + 1.6*2.9 inch passive radiator
Frequency response: 90Hz-15kHz
60
Unit weight: 270 g
Unit dimension: 5.2 x 2.8 x 2.7 inch
Warranty: One-year limited
Power
• Input:5V
1A
Wireless/Networking
Bluetooth versions: Bluetooth V4.0
• Profiles supported
Warning
• Do NOT drop, hit or shake the device.
• Do NOT disassemble, repair or modify the Bluetooth speaker by yourself.
• Do NOT use cleaning products that contain benzene, solvents or alcohol.
• Do NOT expose the Bluetooth speaker to excessive heat or to direct
• Do NOT store the device in a place with high humidity or dust.
• Do NOT place heavy objects on top of the Bluetooth speaker.
• Do NOT use near a microwave oven or wireless LAN products.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2017:05:18 17:48:31+09:00
Modify Date                     : 2017:06:21 19:00:47+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Metadata Date                   : 2017:06:21 19:00:47+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 80
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 6161 bytes, use -b option to extract)
Producer                        : Adobe PDF library 10.01
Format                          : application/pdf
Creator                         : Administrator
Title                           : DS-1003 说明书 打样
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : False
Max Page Size W                 : 96.484722
Max Page Size H                 : 30.000012
Max Page Size Unit              : Centimeters
Font Name                       : Calibri-Light, Calibri, Calibri-Bold, Myriad-Roman, AdobeSongStd-Light, MicrosoftYaHei
Font Family                     : Calibri, Calibri, Calibri, Myriad, Adobe 宋体 Std, 微软雅黑
Font Face                       : Light, Regular, Bold, Roman, L, Regular
Font Type                       : Open Type, Open Type, Open Type, Type 1, Open Type, Open Type
Font Version                    : Version 2.10, Version 5.73, Version 5.73, 001.001, Version 5.002;PS 5.002;hotconv 1.0.49;makeotf.lib2.0.15106, Version 6.02
Font Composite                  : False, False, False, False, False, False
Font File Name                  : calibril.ttf, calibri.ttf, calibrib.ttf, wmr_____.pfb; wmr_____.pfm, AdobeSongStd-Light.otf, msyh.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Rendition Class                 : proof:pdf
Document ID                     : xmp.did:E5688723AF3BE7119C56929C0F10A7DA
Instance ID                     : uuid:f5b94bd9-e89e-43e2-a1b3-fa6fa43bfa11
Original Document ID            : uuid:93c3c424-8b35-4923-b3e5-4c669ea7eabe
Derived From Instance ID        : uuid:69a0b05a-be40-49e1-ae3e-f1bd5424f961
Derived From Document ID        : xmp.did:D814700AA53AE711B2C3A586B91C6ED2
Derived From Original Document ID: uuid:93c3c424-8b35-4923-b3e5-4c669ea7eabe
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:F47118A0E13CE51180FB89BE948531AF, xmp.iid:E5688723AF3BE7119C56929C0F10A7DA
History When                    : 2015:08:07 16:52:25+08:00, 2017:05:18 17:48:25+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : C:\Users\Public\Documents\KeyShot 6\Renderings\1003.329.png
Page Count                      : 1

EXIF Metadata provided by EXIF.tools