Wooyoung Telecom HL500S LCD Monitor User Manual

Wooyoung Telecom Co., Ltd. LCD Monitor

User Manual

WOO YOUNG Telecom CO.,LTD.User¡¯s Manual
FCC STATEMENTThis equipment has been tested and found to comply with the limits for aClass B digital device pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or tele-vision reception, with can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one more of thefollowing measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. - Only shielded interface cable should be used.Finally, any changes or modifications to the equipment by the user notexpressly approved by the grantee or manufacturer could void the usersauthority to operate such equipment.
1Contents1. Before Setting up °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° 3Brief Specification of LCD Monitor °°°°°°°°°°°°°°°°°°°°°°°°° 3Precautions °°°°°°°°°°°°°°°°°°°°°°°°°°° °°°° °°°° ° 42. Items °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° 63. Setting up the LCD monitor °°°°°°°°°°°°°°°°°°°°°°°°°° 8Where is a good place to position the monitor? °°°°°°°°°°°°°°°°°° 8Check before connecting the power cord and the signal cable !! ° ° ° ° ° °° 8How to connect the power cord and the several cables to the LCD monitor.°° 9Connecting Your LCD Monitor °°°°°°°°°°°°°°°°°°°°°°°°°°° 10Plug & Play °°°°°°°°°°°°°°°°°°°°°°°°°°°°°° °°° °°° 10Warm-up Time °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° 104. Adjusting The Monitor °°°°°°°°°°°°°°°°°°°°°°°°°°°°° 11The Function Control Buttons °°°°°°°°°°°°°°°°°°°°°°°°°°° 11How to use the Hot Key. °°°°°°°°°°°°°°°°°°°°°°°°°°°°°° 11Main OSD Menu °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° 12BRIGHTNESS/CONTRAST °°°°°°°°°°°°°°°°°°°°°°°°°°°° 12COLOR °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° 13POSITION &CLOCK/PHASE °°°°°°°°°°°°°°°°°°°°°°°°°°° 13OSD MENU ADJUSTMENT & INPUT SOURCE °°°°°°°°°°°°°°°°° 15SETUP MENU °°°°°°°°°°°°°°°°°°°°°°°°°°°° 15
25. Appendix °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° 16Specifications °°° °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° 1615-pin D-Sub Connector °°°°°°°°°°°°°°°°°°°°°°°°°°°°°° 17DPMS Power Saving Mode °°°°°°°°°°°°°°°°°°°°°°°°°°°° 186. Troubleshooting °°°°°°°°°°°°°°°°°°°°°°°° °°°°°°° 19
3Before setting up1¡ÜResolution : 15.0 inch XGA (1024 X 768@75Hz)¡ÜColor display : 16,777,216 colors¡ÜDPMS (Display Power Management Signaling) ¡ÜOSD (On Screen Display)¡ÜAuto Configuration : Hot key¡ÜDDC 1/2B : Plug & PlayThis is 15.0 inch TFT-LCD monitor. Before setting up the LCD Monitor, please readthis manual to help your understanding of the LCD Monitor.Brief Specification of LCD MonitorAccording to PC system, DDC 1/2B may not be supported. If you meet Errormessage,check your video card which compatibility with DDC. If you eant to knowmore information, please contact our service center.Notice
4Do not use Ketone type material (ex.Acetone), Ethyl Alcohol, Toluene, EthylAcid or Methyl chloride, to clear the panel.It might permanently damage the panel.Check the voltage corresponds to thelocal electrical supply before connectingthe AC power cord.Never use the damaged AC power cord. Keeps it away from stoves, heaters,fireplaces and other sources of heatand magnets.Dont’ put your LCD monitor in a locationwith high humidity and dust.Temperature : 0~40°£CHumidity : 90% lessPlace the LCD monitor on a solid sur-face. If dropped, the screen can bedamaged easily.Precautions
5Don’t touch the screen with a acute nailand pin The LCD monitor can be damaged easi-ly by shock.The LCD monitor consists of electricaldevices. If the LCD monitor is damaged, contactimmediately our service center.Don’t use your LCD monitor underdirect sunlight.If you don’t use the LCD monitor for along time, unplug the LCD monitor.
6ItemsLCD MonitorPower card, DC AdapterUser Manual2
715-pin D-Sub Signal CablePlease make sure the following items are included with your monitor.If any items are missing, contact your dealer.Notise
8Setting up the LCD monitor3Place the LCD monitor on a solid and flat surface. If dropped, the screen can be dam-aged easily. Where is a good place to position the monitor?
9How to connect the power cord and the several cables to the LCD monitor.12DC12V DC Adaptor15-pin D-Sub Signal CablePCNo. Cable connectionsName
1 0All LCD monitors need time to become thermally stable whenever you turn on themonitor after letting the monitor be turned off for a couple of hours. Therefore, toachieve more accurate adjustments for parameters, allow the LCD monitor to bewarmed up for at least 20 minutes before making any screen adjustments.Warm-up TimeThe adoption of the new VESA Plug and Play solution eliminates complicated andtime consuming setup. It allows you to install your monitor in a Plug and Play compati-ble system without the usual hassles and confusion. Your PC system can easily identi-fy and configure itself for use with your display. This monitor automatically tells the PCsystem its Extended Display Identification Data (EDID) using Display Data Channel(DDC) protocols so the PC system can automatically configure itself to use the flatpanel display.Plug & Play
1 1Adjusting The Monitor4The Function Control Buttons How to use the function Key. 1. First click : The OSD main menu appears.2. Second click : The OSD menu disappears.1. Select a command function.2. When you push Auto button, this will optimize image quality automati-cally.Down : 1. Move the on-screen highlighted command item to the nextone.2. Decrease the current option value.UP : 1. Move the on-screen highlighted command item to the Previousone.2. Increase the current option value.Power On/Off toggle button.
1 2When you push the menu button, you can see below main OSD menu.¡ÜBrightness : Changes the overall light intensity of the images being displayed.¡ÜContrast : Changes the ratio of light intensity between the brightest white and dark-est black.¡ÜGamma : Change the gamma value.Main OSD Menu BRIGHTNESS/CONTRASTMAIN MENUBRIGHTNESS/CONTRASTCOLORPOSITIONOSDSETUPEXIT1024¡¿768 60.0KHz / 75HzMAIN MENUBRIGHTNESS/CONTRASTCOLORPOSITIONOSDSETUPEXIT1024¡¿768 60.0KHz / 75HzBRIGHTNESS / CONTRASTBRIGHTNESS ¢¸§š§š§š§š§š§š§š§š¡¦¡¦¡¦¢º50CONTRAST ¢¸§š§š§š§š§š§š§š§š¡¦¡¦¡¦¢ºGAMMA ¢¸§š§š§š§š§š§š§š§š¡¦¡¦¡¦¢ºEXITAdjusting Gamma Value is useful in case of game or movie screen.Notice
1 3CLOCK/PHASE¡ÜWhen image is not clear, you can use clock/phase menu.¡ÜPHASE/ CLOCK : Although ‘Auto Adjustment’ automatically finds the optimum val-ues of Clock and Phase parameters as well as image position, itmay be necessary for you to adjust those parameters manually.It is recommended for you to use ‘Auto Adjustment’ first. If theadjustment results are not satisfactory, then use Clock andPhase adjustment features to get the best adjustment results.Bear in mind that Clock and Phase adjustment may change thewidth of the image and affect image position as well. If the imageis clear while out of center by a couple of pixels, use image posi-tion to center the image. POSITION & CLOCK/PHASE COLOR¡ÜThe tone of color can be changed form bluish white to reddish white.¡ÜColor1 - Blue type¡ÜColor2 - Red type¡ÜRED, GREEN, BLUE - You can adjust red, green and blue values that you want. MAIN MENUBRIGHTNESS/CONTRASTCOLORPOSITIONOSDSETUPEXIT1024¡¿768 60.0KHz / 75HzC O L O RCOLOR1 COLOR2RED ¢¸§š§š§š§š§š§š§š§š¡¦¡¦¡¦¢º50GREEN ¢¸§š§š§š§š§š§š§š§š¡¦¡¦¡¦¢ºBLUE ¢¸§š§š§š§š§š§š§š§š¡¦¡¦¡¦¢ºEXIT
1 4MAIN MENUBRIGHTNESS/CONTRASTCOLORPOSITIONOSDSETUPEXIT1024¡¿768 60.0KHz / 75HzP O S I T I O NHORIZONTAL ¢¸§š§š§š§š§š§š§š§š¡¦¡¦¡¦¢º50VERTICAL ¢¸§š§š§š§š§š§š§š§š¡¦¡¦¡¦¢ºCLOCK ¢¸§š§š§š§š§š§š§š§š¡¦¡¦¡¦¢ºPHASE ¢¸§š§š§š§š§š§š§š§š¡¦¡¦¡¦¢ºEXITPOSITION¡ÜChanges the location of the image.¡ÜH-Position : Moves to the Left/Right¡ÜV-Position : Moves to the Bottom/TopIf image is not clear (noise), you can adjust Clock/Phase.Notice
1 5OSD MENU ADJUSTMENT & INPUT SOURCE ¡ÜSets the OSD menu display position.¡ÜOSD Position : Moves the OSD menu to the horizontal or vertical direction.¡ÜOSD TIME : Shows the OSD TIME displays from 5 to 60sec.¡ÜLANGUAGE : Select language in OSD menu.MAIN MENUBRIGHTNESS/CONTRASTCOLORPOSITIONOSDTSETUPEXIT1024¡¿768 60.0KHz / 75HzO S DOSD POSITION ¢ºOSD TIME ¢º30 SECLANGUAGE ¢ºENGLISHEXITSETUP MENU¡ÜWhite balance : Automatic djust color (white level) for various input source’s whitelevel.¡ÜInformation : display monitor’s information.¡ÜRecall : Discards current setting and replaced all paramotors with the factorydefault values.MAIN MENUBRIGHTNESS/CONTRASTCOLORPOSITIONOSDSETUPTEXIT1024¡¿768 60.0KHz / 75HzS E T U PAUTO BALANCEINFORMATIONRECALLEXIT
1 6Appendix5Display ModesModeVGASVGAXGA640 X 480720 X 400800 X 6001024 X 768Resolution31.468H o r i z o n t a lF r e q u e n c y ( K H z )V e r t i c a lF r e q u e n c y ( H z )Pixel ClockF r e q u e n c y ( M H z )S y n cP o l a r i t y ( H / V )31.46835.00037.50037.87948.07746.87548.36356.47660.02370.08759.94066.67075.00060.30072.18875.00060.00470.00075.02928.32225.17530.24031.50040.00050.00049.50065.00075.00078.750-/+-/--/--/-+/++/++/+-/--/-+/+
1 715-pin D-Sub Connector ¡ÜInput signal : Analog RGB¡Ü15-pin D-Sub connector15pin D-Sub Signal CablePin No.1342Analog Red InputAnalog Green InputAnalog Blue InputGround5Pin No.689710DDC GroundSignal NameAnalog Red GroundAnalog Green GroundAnalog Blue GroundNo ConnectSync GroundSignal Name Pin No.1113141215GroundDDC DataHorizontal SyncVertical SyncDDC ClockSignal Name
1 8This monitor has a built-in power management system called DPMS Power SavingMode. This system saves energy by switching your monitor into a low-power modewhen it has not been used for a certain period of time. The available modes are “ON”,“Standby”, “Suspend”, and “OFF”. DPMS Power Saving Mode ONStateStanbymodeStanbymodeOFFActiveH-syncInactiveActiveInactiveActiveV-syncActiveInactiveInactiveActiveRGBSignalBlankedBlankedBlankedPowerC o n s u m p t i o nUnder30WattLessthan5Watt-RecoveryTimeGreenAlternatingGreen/Orange(0.5 Sec interval)AlternatingGreen/Orange (1 Sec interval)OrangeLED Color andOperting statusWithin2Sec
1 9Troubleshooting6What you seeEnsure that the power cord is firmly connected and the LCDmonitor is on.“out of range” message“No signal input” messageScreen is blank and power indictoris off¦UCheck the maximum resolution and the frequency of thevideo adaptor.¦UCompare these values with the data in the Display ModesTiming Chart.¦UEnsure that the signal cable is firmly connected to the PCor video sources.¦UEnsure that the PC or video sources are turned on.The image is too light or too dark ¦UAdjust the Brightness and Contrast.¦URefer to the Brightness/ContrastThe image color is not good ¦UAdjust the Color ¦URefer to the ColorImage is not centered on thescreen ¦UExecutes Auto Configuration.Screen is blank and power indicatorlight is steady amber or blinksevery 0.5 or 1 seconds¦UThe monitor is using its power management system.¦UMove the computer’s mouse or press a key on the key-board.Image is not stable and mayappear to vibrate¦UCheck that the display resolution and frequency from yourPC or video board is an available mode for your monitor.On your computer check : Control Panel, Display, Settings¦UNote : Your monitor supports multiscan display functionswithin the following frequency domain:Suggested Actions
2 0
Appendix A. Specifications ¡ØThe specification of this monitor is subject to be changed without notice to improve perfor-mance. PanelDisplayResolutionFrequencySync SignalTilting Degree (U/D)Plug&PlayPowerPower ManagementE n v i r o n m e n t a lC o n s i d e r a t i o nD i m e n s i o n sWeightTFT active matrix15 inch304.1¡¿228.1(mm)0.297¡¿0.297(mm)8-bit (16,777,216 colors)1 0 2 4 ¡¿7 6 8 @ 6 0 H z1024¡¿768@75Hz31.5~60KHz56~75HzTTL, P. or N.-5¡Æ~30¡ÆDegreeVESA DDC 1/2B90~265VACAdapter DC 12V, 4.16AUnder 30W 5W lessVESA DPMS0~40¡ÆC (32¡ÆF~104¡ÆF)90% less362mm(W)¡¿345mm(D)¡¿268mm(H)3.2kg1.4kgTypePixel PitchDisplay ColorBasicMaximumHorizontalVerticalInputOutputConsumptionStandby modeTemperatureHumidityOutsideMonitorCartonSize

Navigation menu