Wooyoung Telecom HLM151X 15.1" TFT LCD Monitor User Manual 1 of 2

Download:
Mirror Download [FCC.gov]
Document ID	179567
Application ID	8pDXT6uujomjKqmMzB65gg==
Document Description	User Manual 1 of 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	129.58kB (1619696 bits)
Date Submitted	2001-11-15 00:00:00
Date Available	2001-11-14 00:00:00
Creation Date	2001-11-12 20:28:00
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-11-12 20:28:20
Document Title	User Manual 1 of 2

High Resolution
TFT LCD Monitor
Information to the user
This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio lrequency energy and,
if not installed and used in accordance with the instructions, may cause harmlul
interference to radio communications. However, there is no guarantee that interfer-
ence Will not occur in a particular installation. lf this equipment does cause harmlul
interference to radio or teleVision reception, with can be determined by turning the
equipment ofl and on, the user is encouraged to try to correct the interference by
one more oi the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning
Changes or modifications not expressly approved by the party responsible for com -
pliance could void the user's authority to operate the equipment.
MP-2000 User’ 5 Guide
Information in this manual is subject to change without notice.
© 2001 HANGILTELECOM CO.,LTD. All rights reserved.
Reproduction in any manner whatsoever without the written permission of
HANGIL TELECOM CO.,LTD. Is strictiy torbidden.
HANGIL TELECOM CO.,LTD. shail not be iiabie tor errors contained herein
or tor incidentai or consequentiai damages in connection With the furnishing,
performance, or use of this material.
HLM170M is registered trademarks oi HANGILTELECOM CO.,LTD.;
Microsoft, Windows“ and Windows®NT are registered trademarks of
Microsoft Corporation; VESA, DPMS and DDC are registered trademarks 01
Video Electronics Standard Association; All other product names mentioned
herein may be the trademarks or registered trademarks of their respective
owners.
Contents
Before Setting up
Brief Specification of LCD Monitor -
Precautions ——————
Items 77777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777 8
Setting up the LCD monitor 77777
Where is a good place to position the monitor?
Please control Tilting Degree.
Check before connecting the power cord and the signal cable !!
How to connect the power cord and the signal cable to the LCD monitor 777777
Connecting Your LCD Monitor
Plug & Play 777777
Warm-up Time -----
Adjusting The Monitor -------
The Function Control Buttons 77777
How to use function control button -
How to use the Hot Key. -
Main OSD Menu 777777
AUTO CONFIG
POSlTION
BRIGHTNESS/CONTRAST —
15
15
CLOCK/PHASE
COLOR
USER COLOR
OSD POSITION 77777
INFORMATION ------
Appendix .....
Appendix A. Specifications 7777777
Appendix B. Display Modes -----
Appendix C. 15-pin D-Sub Connector
Appendix D. DF‘MS Power Saving Mode
Troubleshooting ......
1 Before Setting up
This is 15.1 inch TFT-LCD monitor. Before Setting up the LCD Monitor, Please this manual
read help your understanding ck.
Brief Specification of LCD Monitor —)
- Resolution : 15.1 inch XGA (1024 X 768 @60Hz)
- Color display : 262,144 colors
- DPMS (Display Power Management Signaling)
l Viewing angle : L/R 75'l75', U/D 55'l55'
- Brightness : 2000d/m’
- OSD (On Screen Display)
- Auto Configuration : Hot key
I DDCt/ZB/ZBi : Plug & Play
' According to PC system, DDC 1/ZB may not be supported. If you meet Display Error
Notice message, check your video card which compatibility with DDC. If you want to know
more information, please Contact our service center.
Check the voltige comsponds lo 1h: local eleelrlcal Do no! use Kctone type material (=x Acetone), Ethyl
supply before pampering me AC power ppm, Alcohol, Toluene, Ethyl Acld or Methyl chloride, lo
clenr me panel I! mlghl perrnnnenuy damage the panel.
Keep it away from slaves, healers, fireplaces and other
sources oi heal nnd mngnmv
Navel use the damngzd AC power com
Place vhe LCD mollllm on a solid Sudan: ll dropped.
nhe scrml can be damaged ensiip
Don'i pin your LCD monitor III a location with lush
hlllludlly lnd dim
Tempemure new'c
Hnmrdny goalies;
HLMlSlX
Don't much me semen with a zcnle mul and pm The LCD mnnitorcnnsisls ofcleclxicll devices
Inn: LCD monitor is damaged, Connie! immedinlely
mu servlce semen
The LCD mommy cm be «imaged eusuy by shack If you auu'z use the LCD manner 10! a long lime,
unplug me LCD monitor
Don't use your LCD murmur in under duet! sunlighl
User Manual LCD Monitor
‘ \
AC Power Cord 15-pin D-Sub Signal Cable
Notice Please make sure the following items are included with your monitor.
If any items are missing, Contact your dealen
Where is a good place to position the monitor?
Place the LCD monitor on a solid and flat surface. If dropped. the screen can be damaged
easily.
Please control Tilting Degree. %
You can see a supporting prop on the backside of the LCD moni-
tor.
Tilt the screen until you feel comfortable for working
Tilting Degree (Up/Down) :+10/+30 Degree
Check before connecting the power cord and the signal cable !! fl
Turn off the PC power before connecting power cord and signal cable to the LCD monitor.
HILMlSlX
How to connect the power cord and the signal cable to the LCD monitor. fl
AC Power Cord a 15-pin D-Sub Signal Cable
Connecting Your LCD Monitor
1. First, you can connect the power cord to the LCD monitor and AC outlet.
2. You can connect the signal cable to the LCD monitor and the PC system.
Plug & Play )
The adoption of the new VESA( Plug and Play solution eliminates complicated and time con-
suming setup. It allows you to install your monitor in a Plug and Play compatible system
without the usual hassles and confusion. Your PC system can easily identify and configure
itself for use With your display. This monitor automatically tells the PC system its Extended
Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the PC
system can automatically configure itself to use the flat panel display.
Warm-up Time )
All LCD monitors need time to become thermally stable whenever you turn on the monitor.
Therefore, to achieve more accurate adjustments for parameters, allow the LCD monitor to
be warmed up for at least 20 minutes before making any screen adjustments.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2001:11:12 20:28:20+09:00
Create Date                     : 2001:11:12 20:28:00+09:00
Producer                        : Acrobat Distiller 4.0 for Windows
Page Count                      : 11

EXIF Metadata provided by EXIF.tools