Wooyoung Telecom HLM151X 15.1" TFT LCD Monitor User Manual 2 of 2

Download:
Mirror Download [FCC.gov]
Document ID	179568
Application ID	8pDXT6uujomjKqmMzB65gg==
Document Description	User Manual 2 of 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	151.29kB (1891085 bits)
Date Submitted	2001-11-15 00:00:00
Date Available	2001-11-14 00:00:00
Creation Date	2001-11-12 20:19:08
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-11-12 20:28:55
Document Title	User Manual 2 of 2

4 Adjusting The Monitor
The Function Control Buttons
The function control buttons for monitor are located on the bottom side of the LCD monitor.
MENU SELECT POWER
99099
AUTO EH
LED
How to use the function control button.
MENU Select Select
0 V O 0 V 0 V 9 0 V 0 V
Start the Move to the icon Select the icon Move the menu bar that Select the
Main OSD that you want you want menu bar
Menu
Select 4 > Select MENU
9 0 V 0 V O 0 V 0 V 0
Adjust values Save Adjust values Move In the EXIT Finish the finish the
menu bar OSD menu
How to use the Hot Key. %
Seiect
0 AUTO
fluTo
: When you push Auto button, this will optimize image quality automaticaily
4 >
O O : You can adjust the contrast values that you want by this hot key.
BF EN
N t. While menu displays on the screen. don't use hot key.
0 |Ce If you want to use hot key, you must finish the menu status.
Main OSD Menu
When you push the menu button, you can see below main OSD menu.
Auto Config
rm 3] xi W
050 [ i ] EXIT
1024 X 768 / 60HZ
: Q o 0
AUTO CONFIG )
Aulo Configure
I You can use this menu to optwmize wmage quality.
Auto Config Auto Config
,_, 3d E Ame Conng
—] ‘ M [E Exn
050 [i] EXIT
1024 X 768 / GOHZ Select/Up/Down
o o o , g u, L, L,
POSITION
Adjust Pos' 'on
I Changes Ihe Iocahon 01 the wmage.
I H—Posiflon : Move tome Lefl/Righl
I VrPoswtion : Move tothe Bottom/Top
Position Position
xi E}? H Posmcn
‘ [m '_L‘ VPosman
osn [i] IEXIT] EXIT
1024 X 768 / SOHZ Select/UplDown
Brightness i’ Contrast
I Brightness Change the overall light intensity ol the images displayed.
I Contrast Change the ratio ol light intensity between the brightest while and the darkest black.
I Adiust contrast values that you want
I Delault set Discard current setting and replaces corresponding parameters with the lactory delault
values about brightness/contrast.
Bright/contrast Bright/contrast
. .. ._ ‘ xx Brightness
A1] ] X? ”H 1) Contrast
W] [i] EXIT t: DelaultSet
EXIT
1024 X 768 / 60Hz Select/Up/Down
CLOCK/PHASE
Clock/Phase
I When image is not clear, use clock/phase menu.
I PHASE/ CLOCK : Although ‘Auto Adjustment' automatically linds the optimum values or Clock and
Phase parameters as well as image position. it may be necessary lor you to adjust those parame-
ters manually It is recommended Ior you to use ‘Auto Adjustment lirst. ii the adjustment results are
not satislying, then use Clock and Phase adjustment leatures to get the best adjustment results.
Bear in mind that Clock and Phase adjustment may change the Width ol the image and al‘lect image
position as well. it the image is clear while out ol‘ center by a couple at pixels. use image position to
center the image.
I Delault set Discards current setting and replaces corresponding parameters With the tacton/
delault values about Clock/Phase
Notice
COLOR
mock/Phase Clock/Phase
w L: “H Cwock
Phase
@ EXIT De'ault Set
an
1024 X 768 / 60Hz Select/Up/Down
[fimuge is not clear (noise). you can adjust Clock/Phase.
Color
The tone of co‘or can be changed from b‘uwsh while In reddish while.
Colon , B‘ue Iype
Color2 , Red Iype
User Cmor , Vou can se\ect Ihe cow.
E‘ Co‘ofl
H H 7; Comm
7? User Com:
EXIT] EX“
1024 X 768 / 60HZ SelchUp/Down
USER COLOR
User Color
I Red Gain / Green Gain / Blue Gain You can adiusi red. green and blue values that you want
I Delauli set Discards current selling and replaces corresponding parameters With the lacicry
delauli values about user color
Color
Red Gain
Green Gain
Blue Gain
Delault set
Exit
Select/Up/Down
®
[E
w gfis
OSD POSITION
OSD Position
l Sets the OSD menu display position
I H-Position Moves the OSD menu to the horizontal direction
I V-Position : Moves the OSD menu to the vertical direction.
I Display Func : Normali Fade In, Blending In
I Deiault set Discards current setting and replaces corresponding parameters With the factory
delault values about OSD Position.
OSD Function OSD Function
II II H Position
v Position
Dispiay Func
Deiault set
Exit
1024 X 768 / 60Hz Select/Up/Down
EXIT
INFORMATION
INFORMATION
l Shows the iniormation oi the current video signaI.
l 1024X 766! Current Resqution.
l HS HorizontaI Sync by the graphic card.
I VS : Vertical Sync by the graphic card.
Information Information
tr I (i I/H 1024x755 I
" i " Hs 40.4KH1
. Vs : so 0 H1
OSD [I] EXIT] Ver V1.0U-DO
1024 X 768 / 60Hz Select/UplDown
5 Appendix
Appendix A. Specifications
Type TFr active matrix
Size 15.1" Diagonal (38cm)
307.2 X 230.4 mm
Brightness 200cd/m’
Panel Viewing Angie L/R : 75'l75'
[LIR/U/D] U/D :55°/55°
Pixel Pitch oammxoamm
Display Color s-bit (262,144 colors)
Response Time Tr : 20ms, Tl : 30ms
Display Basic 1024 X 768 @50Hz
Resolution Maximum 1024 X 768 @75Hz
Frequency Horizontal 31~60KHZ
Vertical 55~75Hz
Sync Signal TI'L. P. or N.
lnput Video signal Analog RGB (0.7Vp-p, 75m
Connector 15-pin D-Sub connector
Tilting Degree (U/D) +1cl+30 Degree
Plug & Play VESA DDC1/ZB/28l
Input lnternal type : 90~255 VAC
Power Consumption Under 25W
Standby mode aw less
Power Management VESA DPMS
Environmental Temperature 0 ~ 40°C (32°F ~104°F)
Considerations Humidity 90% less
Dimensions Outside 390mm(W) X ssemmm) X 172mm(H)
Welght Monitor 4 2kg
Carton 2 4kg
iThe specification 01 this monitor is subject to be changed without notice to improve perlorr
mance.
Mode Resolution Horizontal Vertical Pixel Clock Sync Polarity
Frequency (KHz) Frequency (Hz) Frequency (MHz) (HN)
720 x 400 31.468 70.087 28.322 -/+
VGA 31.468 59.940 25.175 -/-
540 x 480 35.000 66.670 30.240 -/-
37.500 75.000 31.500 -/-
37.879 80.300 40.000 +/+
SVG A 300 x 600 48.077 72.188 50.000 +/+
46.875 75.000 49.500 444-
48.363 60.004 65.000 -/-
XGA 1024 x 768 56.476 70.000 75.000 4.
60.023 75.029 78.750 +/+
Appendix C. 15-pin D-Sub Connector %
’ Input slgnal :Analog RGB
’ 15-pin D-Sub connector
Pin No. Slgnal Name Pin No. Signal Name Pin No. Signal Name
1 Analog Red lnpul 6 Analog Red Ground 11 Ground
2 Analog Green lnpul 7 Analog Green Ground 12 BBC Data
3 Analog Blue Input 8 Analog Blue Ground 13 Honzonlal Sync
4 Ground 9 No Connecl 14 Vemcal Sync
5 BBC Ground 10 Sync Ground 15 BBC Clock
D—Sub
Appendix D. DPMS Power Saving Mode
This monitor has a built-in power management system called DPMS Power Saving Mode.
This system saves energy by switching your monitor into a low-power mode when it has not
been used for a certain period oi time The available modes are “ON", “Standby", “Suspend",
and “OFF".
Slate Signal Power Recovery LED Color and
H-sync V-sync RGB Consumption Time Operating status
Under
ON Act A |' - - Green
ive c we Active 40Watt
Standby . . Alternating
inactive Active Blanked Green/Orange
mode (0 5 Sec inteNai)
Suspend Less than Vifithin 2 Ailemaling
d Active Inactive Blanked 5Wa|t Sec Green [Orange
mo 9 (1 Sec interval)
OFF inactive Inactive Blanked Orange
6 Troubleshooting
What you see...
Suggested Actions
Screen ts blank and power indi-
cator is off
~ Ensure [hat the power ettrd ft firmly connected and the LCD
mttnittrr R on.
“out of range" message
~ Check the mnxtmum rcmlulmn and the frequency or the yidett
adaptor.
~ Compare thete values with the data In the Dtsplay Mttdes runrng
Chilfl.
“No signal tnput” message
~ Ensure thut the stgnal euhte is ftnnty eenneetett m the PC or ”(160
sources
~ Ensure that the PC or video sources are tnmeti on.
trttage is not slabte and may
appear to vtbrate
~ Check that the disptuy resoluuon and frequency from your PC or
men board ts an avatlable made for your monitor. On your can
purer check : Control Panel, Display, Settmgs
~ Note . Your monttor supports mttltiscan dtsplay functtonx wnhin
the [allowing frequency domam.
- Horizonlat frequency » 11~60KH2
- Verttcftl freqttenay : 55~75Hz
- Maximum refresh me 1024 X 758 @75Hz
The tmage is 100 light or too dark
~ Adjust the Brighlttess untt Contrast,
~ Refer lo the ttrightnessttontrust
The tmage cotor ts not good
. Adjust the Cetor
. Refer lo the Color
Image is not centered on the
screen
~ Executeh Auto Ctrnt'tgurqttan
Screen ts blank and power indi-
camt light ts steady amber or
bttnks every 0.5 or 1 seconds
, The manner h usmg us power management system
, Motto the compurer's mouse or press u kcy on the keyboard

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2001:11:12 20:19:08
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:11:12 20:28:55+09:00
Page Count                      : 12

EXIF Metadata provided by EXIF.tools