XTC Motorsports XTC5000 Digital Satellite Receiver User Manual Microsoft PowerPoint XTC5000

Download:
Mirror Download [FCC.gov]
Document ID	637483
Application ID	VmoZNpv6tbErgwRTxJ4Neg==
Document Description	Users Manual Part III
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	104.05kB (1300638 bits)
Date Submitted	2006-03-17 00:00:00
Date Available	2006-03-17 00:00:00
Creation Date	2006-03-10 10:48:58
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2006-03-10 10:49:04
Document Title	Microsoft PowerPoint - XTC5000.ppt
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

CHANNEL MANAGER
Lock Channel
In Main Page, press ● SORT key on the RCU,
and then select Lock on the command menu.
This Lock command allow you to lock the channel.
First select the channel, which you want to lock,
pressing OK key and then
will be marked at
rear of your selected channel name.
Note : To perform this function, you should set up
the Parent Lock which is explained after.
Rename Channel
In Main Page, press ● Edit key on the RCU,
and then select Rename CH on the command
menu.
This Rename CH command allow you to rename
the channel. First select the channel, which you
want to lock, pressing OK key and then Keypad
Dialog Box will be displayed. Edit your desired
name entering word or number.
(If you select ◀, it deletes the previous word)
And check whether the channel name is changed
on channel list.
34
CHANNEL MANAGER
Delete channel
In Main Page, press ● Edit key on the RCU, and
then select Delete on the command menu.
This Delete command allows you to delete the
channel permanently. First select the channels,
which you want to delete, then selected channel
number will be changed to
If you cancel the
selection, press OK key again, then the number
will be back as it was
If you decided to delete, press EXIT key and then
Message box will be displayed. Press OK to
delete.
And check whether the channel number is
changed exiting on channel list.
Warning : The deleted channel can not be
recovered unless you search again. Please be
careful when you decide to delete channel.
Sort Method
In Main Page, press ● SORT key on the RCU,
and Sort Method will be displayed.
This Sort method has 4 sub commands and it
allows you to sort the channels as provided.
You can sort the channels by Lock, Scramble,
SAT name and CH name.
Place the cursor on your desired line, and then
press OK key.
And check whether the channels are sorted
exiting on the channel list.
Note : Radio Channel Manager is same operation
as TV channel Manager.
35
ELECTRONIC PROGRAM GUIDE (EPG)
XTC 5000 provides EPG function for you to get
access to the TV Guide(or Radio Guide if you are
listening to radio channels) which will give the
titles of the current and next programs on different
channels. The information is only available from
the network to which the channel you are
watching belongs.
Press EPG key on your RCU or select Program
Guide in the Main Page.
Two different types of EPG available, which is
GRID EPG and Weekly EPG
You can see the channel list in the left side and
Program schedule for selected channel will be
displayed in the right side. The time will be
displayed relating to the program schedule.
Select one channel and placing the “▼” mark on
the time of Program name which detail information
you want to know. Then you can see the program
changes blue color. And press OK key, then detail
information box will be displayed.
Note : A ‘No data available” message will be
shown if the selected channel does not provide
EPG date.
36
TIMER
The “TIMER” function allows you program the timer
with various ways. This function is one of the
strong point of XTC 5000
To activate the “Turn on time” and/or “Turn Off the
time”, Select YES and enter your desired time.
Note : The XTC 5000 display the time which is
given by Satellite, so it may be a some differences
between actual time and XTC 5000 ’s time.
Time Adjust
To activate the “Turn on time” and/or “Turn Off
the time”, select YES and enter your desired
time.
And you can also select channel which will be
turn on or turn off.
Note : Easy timer is default for the first time.
Time Reservation
Time Reservation allows you to program the
various timer function.
You can set the timer daily, weekly, monthly and
yearly
37
ANTENNA DIRECTION HELP
Although you entered correct value in Antenna
Set up menu, if your antenna is positioned
incorrectly, you could not receive signal form the
Satellite.
So XTC 5000 provides Antenna Direction Help in
order for you to have exact information for the
pointing of your antenna.
First select your desired Satellite name and then
the location of selected satellite will be displayed.
In case of that the location of the satellite is
changed, you can re-set up the new location.
Second, enter the value of Longitude and Latitude
of your location.
If you entered correct value of your position, place
your cursor on Compute and press OK key.
Then XTC 5000 show the exact information of
antenna pointing.
38
GAME
GAME
XTC 5000 provides you with three different
types of very exciting video games.
The video games are simply available at
the sub-menu of the main menu “Utility”.
The available games are,
1)
SNAKE
2)
MINE SWEEPER
3)
CRAZY TETRIS
39
RECEIVER INFO & FRONT PANEL DISPLAY
Receiver Information
In the Receiver Information, you can show the
information of the product, its version and
contact point of supplier. If you have a problem
on this products and any question, please feel
free to contact the supplier which contact point is
mentioned in this Receiver Information.
Front Panel Display
: UP LOAD PROCEDURE
: VCR MODE
: DOWN LOAD
PROCEDURE
: SYSTEM WAITTING
: ERROR IN DATA
TRANSMITTING
: FLASH ROM ERROR
: TV MODE
: SYSTEM BOOTING
40
TROUBLE SHOOTING
Problem
The display on the front panel
Possible causes
Main cable is not connected.
does not light up.
No sound or picture, but the
What to do
Check that the main cable is
plugged into the power socket.
Press the standby button.
front panel shows red light.
The XTC 5000 is in standby
mode.
No sound or picture.
The satellite dish is not
Adjust the dish. Check the
signal level in the Antenna
Setup menu.
pointing at the satellite.
No signal or weak signal.
Bad picture / blocking error.
The satellite dish is not
Check the cable connections,
LNB and other equipment
connected between the LNB
and the receiver, or adjust the
dish.
Adjust the dish.
pointing at the satellite.
Signal is too strong.
Connect a signal attenuator to
the LNB input.
Satellite dish is too small.
Change to a larger dish.
LNB noise factor too high.
Change to an LNB with lower
noise factor.
The LNB is faulty.
41
Change the LNB.
TROUBLE SHOOTING
Problem
No Welcome Menu on the
screen after you switched on
the XTC 5000 for the first time.
Possible causes
What to do
The system is connected by
SCART leads and TV is not in
AV/EXT mode.
If the system is connected by
SCART leads, switch the TV to
the appropriate AV input.
The system is connected by
Check the UHF channel fixed
in your system and tune the
UHF channel properly..
RF leads.
There is interface on your
digital satellite channels, an
existing terrestrial channel or
video signal.
The system is connected by
RF leads and the output
channel of the XTC 5000
interferes with an existing
terrestrial channels or Video
signal.
Change the XTC 5000 output
channel to a more suitable
channel, or connect the system
by SCART leads.
The RCU is not
Battery exhausted.
Change the batteries.
RCU is incorrectly
Aim RCU at XTC 5000, or
check that nothing blocks the
front panel.
working.
aimed.
Note : If you have tried all of the actions suggested above, without solving the problem,
please contact your dealer or service provider.
42
SYSTEM SPECIFICATION
1) SYSTEM CAPACITY
Fully MPEG2, DVB complaint
2) DEMODULATION
QPSK demodulation and FEC decoding
Symbol rate (Rs) 2 < Rs < 45 Mbaud
3) VIDEO DECODER
MPEG-2 Main Profile @ Main Level With Letter Box filter
Data rate up to 15Mbits/s
Video Formats 4:3, 16:9
4) AUDIO DECODER
MPEG-1 layer I and II, Musicam
Stereo Channel, Dual Mono, Joint Stereo Channel, Mono
5) PROCESSOR RESSOURCES
Processor SGS-Thomson Sti5518
SDRAM 8 Mbyte
Flash 2 Mbyte
6) LNB INPUT
Connector 2 x F-Type, 3/8-32UNEF-2A (1 Input / 1 Loop through)
Input Frequency 950 to 2150 Mhz
LNB Supply 13.5±0.5V / 18.5±0.7V, max.500mA
Band Switch Control 22 KHz
7) Component Outputs (YUV)
Connector type : 3 x RCA (Y Pb Pr)
Output impedance 75Ω unbalanced
8) S-VHS Output
Video format Y,C
Output impedance 75W unbalanced
43
SYSTEM SPECIFICATION
9) VIDEO OUTPUT/ AUDIO OUTPUT
Connector one RCA/ Connector two RCA (L/R)
10) Digital Audio Output
Connector type 1 x Optic
Sampling frequency rate 32 , 44.1 or 48khz
11) RF MODULATOR
Connector two IEC(M/F)
RF Output Signal NTSC M
Video Carrier Frequency
61.25 ± 90 ㎑ US 3 CH
67.25 ± 90 ㎑ US 4 CH
12) RS232 SERIAL DATA PORT
Connector 9 pin DB9(M)
Data protocol RS232C interface
13) POWER SUPPLY
Type Switching mode
Input Voltage 90 - 250V AC @ 50Hz/60Hz±5%
Norminal Power Consumption 27W
14) CONNECTORS
1 LNB Input / 1 Loop through output (2F-type : IEC169-24)
1 x 0/12 Volt (RCA)
2 x Audio L/R (RCA)
1 x CVBS (RCA)
3 x YUV (RCA)
1 x RS-232 (9-pin D-sub male)
1 x RF Modulator (2F-type : IEC169-24)
1 x S-VHS (4-pin Mini-Din)
1 x Digital Audio Output (optic)
44

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 11
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:5842fba9-443d-4b42-99b4-f366acda87e4
Modify Date                     : 2006:03:10 10:49:04+01:00
Create Date                     : 2006:03:10 10:48:58+01:00
Metadata Date                   : 2006:03:10 10:49:04+01:00
Document ID                     : uuid:e3d20412-f9fd-4775-b837-cb24381c7978
Format                          : application/pdf
Title                           : Microsoft PowerPoint - XTC5000.ppt
Creator                         : PScript5.dll Version 5.2
Author                          : Administrator
Producer                        : Acrobat Distiller 6.0 (Windows)

EXIF Metadata provided by EXIF.tools