XTC Motorsports XTC5080PVR Digital Satellite Receiver User Manual 1
XTC Motorsports Inc. Digital Satellite Receiver 1
Contents
- 1. Users Manual Part I
- 2. Users Manual Part II
- 3. Users Manual Part III
- 4. Users Manual Part IV
Users Manual Part I
DIGITAL SATELLITE RECEIVER XT C 5080PVR XTC MOTORSPORTS INC. ADDRESS : 205 CHAMPAGNE DRIVE UNIT 3, TORONTO, ON. M3L 206, CANADA DIGITAL SATELLITE RECIEVER FCC ID . TYV-XTCSOBOPVR MODEL N0 XTC SOBOFVR POWER : Input Voltage 90 — 250V AC @ 50Hz/60Hzi5% The sockeI-cutlet shall be Installed riearthe equipmenl and shall be easily accessible This device complies With part 15 ofthe FCC Rules, Operation is subiect to the (oIIoWing two Condiliaris 1 This device may nnI cause harmrui inIerIerence‘ and 2. This device must accept any interference received, including interierence that may cause undesired operation Note This equipment has been tested and lound to comply With the limits lor a Class B digital device, pursuant to pan 15 olthe FCC Rules These limits are designed to provide reasonable protection against harmlul interference in a residential installation. This equipment generates, uses and can radiate radio lrequency energy and‘ it not installed and used in aocordanoe With the instructions. may cause harmful |nier1erence to radio communications HoWever‘ there is no guarantee that interlerence Will not occur in a parlicular insIaIIatian ”this equipment does cause harmful inteflerence to radio or television reception, which can be determined by turning the equipment oil and on, the user is encouraged to try to correct the interlerence by one or more oi the loIIoWing measures (07 Reorient or relocate the receiving antenna. 0 increase the separation between the equipment and receiver. (0) Connect the equipment into an outlet on a circuit diflerent from that to which the receiver is connected Q Consult the dealer or an experienced radio/TV technician for help Modifications not expressly approved by the manulacturer could void the users aulhority to operaled Ihe equipment under FCC rules "IMPORTANT SAFETY INSTRUCTIONS". or the equivalent. The safety instructions 1) 2) 3) 4) 5) 5) 7) 9) 1D) 11) 12) 13) 14) shall include, as app cable to the particular apparatus. the information and warnings listed below: Read these instructions. Keep these instructions Heed all warnmgs Follow all instructions Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ofthe ventilation openings. Install in accordance With the manufacturer‘s instmctions Do not install near any heat sources such as radiators, heat registers. stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades With one wider than the other A grounding type plug has two blades and a third grounding prong The Wide blade or the third prong is provided for your safety When the provrded plug does not fit into your outlet, consult an electriclan for replacement ofthe obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs. convenience receptacles. and the point where they exit from the apparatus. Only use the attachments/accessories specified by the manufacturer Use only With a cart, stand, tripod. bracket, or table specified by the manufacturer. or sold with the apparatus. When a cart is used. use caution when moving the cart/apparatus combination to avoid Injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged. liquid has been spilled or objects have fallen into the apparatus. the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped CAUTION DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). N0 USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUAUFIED SERVICE PERSONNEL This symbol is intended to alert the user to the presence oi uninsulated ‘dangerous voltage“ withi the product‘s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance, C 5 OPVR — D gltal SateII te Rece ver CONTENTS Page Page GENERAL INFORMATION Main Feature For your Safety Unpacking General Operation Remote Control Unit Front Panel Rear Panel INSTALLATION Connecting to Antenna a TV Connecting to TV uslng RF support Connecting to TV uslng RCA support Cennecting in TV uslng Component Cunnectlng in Digital Amplifier INSTALLATION WIZARD MAI N PAGE USER INSTALLATION Antenna setup - 1) DiSEqC 1 z Antenna setup - 2) Fixed Antenna setup 7 3) USALS Channel search a1)DiSEqC1.Z Channel search -2) Fixed Channel search — a) USALS Multi-SAT Search System setting Parental Lock Factory Default 4 GENERAL FUNCTION 27 4 Select Channel u 5 Pause the Frame 28 5 Previous Channel Recall 28 6 T\/&Radio mode 28 7 TV&VCR mode 28 a Channel lniormatlon 29 g Volume&Audio Control 29 Position 30 10 10 CHANNEL MANAGER 31 10 Channel Manager 31 11 Favorite Channel 32 11 Move Channel 32 12 Lock Channel 33 Rename Channel 33 Delete Channel 34 aortCliaiiiiei 34 13 Hard Disk Recorder 35 Semi Twin PVR mode 35 14 Pie-Recording made 35 Recurdlng made 37 15 Play back mode 39 15 Timer Recording 40 17 E98 Recording 4a 18 File List 41 19 HDD Manager 41 21 Move 41 22 LoCk/ Rename/ Delete 42 5 skip/ 5le Merge 43 25 Format HDD/ 7aSegrnent display 44 26 EPG (Electronic Program Guide) 45 TIMER 46 ANTENNA DIRECTION HELP 47 RECEIVER INFORMATION 45 FRONT PANEL DISPLAY 4s TRouELE SHOOTING 49 SYSTEM SPECIFICATION 51 ENERA INFORMA ION A xTc 5080WRIS a convenient product that allows you to view a variety of programs provided through satellite. This user's guide covers the installation of the XTC SUSOFVRand the necessary steps to implement various features This also explains special features available only in this no soaowmn detail, which will allow you to make full of these feature. - Fully MPEGZ, DVB compliant - 44 Hours recording your built in ms HDD (tiara Dlsk Drive) in 4Mbps stream - imthin the same fr it is possible to fault] one channel and view another channel - Althelime ofwatching the live mode, prerecording motion hytimeshift default supported - Automatic restoration ability for all files that were in process of rmording at the time of an electricity tailure - Recording current program while playing back earlier program simultaneously - Recording reservation function on Timer and EFG - Recording and playback With time delay (Time-shill function) - 3 steps (x4, x8, x16) Fast forward and Rewind function - Pause and step playback function - HDD managementfunetion (Play. Move. Lock. Rename. Delete, Format) - Various playback function (Jump, Repeat, shuffle, slow playback) - Digital Audio with Ac.:l support hySPDIF - PIG (Picture in Graphic) support - Provide friendly and easy-to-use menu system ~ Various channel ed' ng function (favorite, moving, locking, renaming, deleting and sorting) - stores up to soon channels - Easy and speedy software upgrade through RS-232 port - Plug-and.play data transfersystem(nsR to nsR) - Tlmef function, automaticallyturns onfoff bysetting function (daily, weekly, monthly and onetime) - Antormtic reserved channel moving system - Provide Electronic Program Guide (EPG) . More than sou pages 050 Teletext (DVB Ers 300 we) and subtitle function support - Suppon for various video output: cvas, s-VHS, vuv - zss colors Orbscfeen-Displly - PALINTSC automatically conversion - Last channel automatically suvlnu GENERAL INFORMATION This XTC 5080PVRhfls been manutactured to meet international safety S18ndards Please read all of the safety and operating instructions baore opeiatl'ng the product. And keep all safety and opeiating instructions for luture reference. 1 Main Supply 90-250V AC, SOIWHZ, 30W 2 Overloading Do not overload a wall outlet. extension cord. or adapter as this may result in lire electric shock. 3 Liquids Do not expose the XTC 5080PVR|0 rain or moisture The apparatus shall not be exposed to dripping or splashing waterand that no obiects filled with liquids, such as vases, shall be placed on the apparatus 4 Cleaning Disconnect the XTC WBQPVRWW the WEI" outlet DE'U’E cleaning. Do not use |quIId cleaners Dl' aerosol cleaners Use a lightdamp cloth tor cleaning 5 mefltlbn The 5105 on top oithe XTC 5080PVRmi-I51 be left LIVICDVEI’EG to BHOW proper Elll'flUW tothe Unit. DD not stand the xrc sompvnon sotl furnishing carpets Do not expose the xrc 5080PVR|0 direct sunlight or do not place it near a heater Do not stack electronic equipments on top of the Brand Name Keep distance about minimum 10cm from the well when its installed 5 Attachments Do not use any attachments not recommended by product manutacturer as they may cause hazards 7 Connectloh lo the Salelllle Dlsh LNE Disconnect the XTC SOSDPVRfrom the mains before connecting or disconnecting the cable from the satetlite dish. FAILURE TO DO SO CAN DAMAGE THE LNB. B Connectlon lo the TV Disconnect the XTC 5030PVRfrom the mains belore connecting or disconnecting the cable from the TV. FAILURE TO D0 50 CAN DAMAGE THE TV. 9 Earihinq The LNB cable MUST BE EARTHED to the System earth for the satellite dish The earth System must comply with SABS 061. 10 Lomtlcn Place the x‘rc 5080PVRindoor in order to prevent potential damage trom lightning. rain. or direct sunlight 11 Servicing Do not attempt to service this product yourselt. as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. “Hume rD reduce the vsk ot ale tank a. not and» ‘ wveflar haskl Newers we Pi-‘S inside Nciur were in quli‘imfl mm mam mis Wadi iroca'es mt sr'rbal more «rigours mirage inside impiiaiii nslmctaiis in piano lllil niesetl'is z axmiwwg We producl nsK ot clccVic flack oi warn rito ENERA INFORMA ION Make sure you have received all the items in the x70 6080PVR Satell'ne Receiver canonr th: snaonR Remote Control Unit User’s Guide Batteries RCA CABLE Throughout this manual you will notice that the everyday operation olyourxi'c 5050ka is based on a series or user lriendiy on screen display and menus. These menus WI|| help you get the most from your Brand Name guiding you through installation, channel organizing, vlewing and many otheriunctions. All runction can be carried out using the buttons on the Rcu, and some or the runction can also he carried out using the buttons on the front panel ii at any time when you using the menus you want In return to itie rioirmi TV mode, press the WIN] button The xrc SUSDPVR is easy to use. always at your command and adaptable for iuture advances. Please be aware that new software may change the runctionality of the Brand Name, In the case of your lacing difficulties with ihe operation or your Brand Name. please consult the relevant sermon oHnis manual. Including the Problem Shootingr or alternatively call yuur dealer or a customer service adviser GENERAL INFORMATION Function Turns put/er ONIOFF of the MR When walcnlnn a channel mutes the sound Enter number of lne requlred menu item or select a channel numberto watch TVIRADIO smtones oetween TV and Radio mode snttenes oaek to previous ehannel Dlsplay the lavonte ehannel list shows lMomlallcn of the current channel Press this key one llme to run menu on soreen and call oommand oox f ; Moves up lduwn a page in lne mannel list Executes the seleoteu item in the menu OK. LIST screen, or enters the desired value ”1 any tn.ut mode When watmlng a channell onange onannels, or moves to the next higher or Inwer ttem ln the mam When watchlng a channel, autust the “W W,“ mm, W volume or move to the left or right item in menu Returns to lhe previnus menu on the menu _.elrom the menu When watching a onannel, swttches lne auulo languages Calls up the EPG Seleotsthe dmererttaudlo modes smtones oetween TV orAv made Dlsplay position bar on the swash to adjust lne antenna or tor manual search. Snitches to subthle and teletext mode smtones to UHF tuning made Press once to pause tne screen picture, press onoe agaln to go to the normal mode selectable 43 letter box and 16‘9 screen mode GENERA INFORMA ON Key Fundion MENU Shows the l'l'laln menu and command box on the screen. 0K Executes the selected item ln the menu‘ In Returns to the preview menu on the menu saleen. O Turns on and off the powerofihe rec/elven wnen watchlng, dlanglng no the prevlous am next cnennel, or nnves no me nexthlgher or lower item in the menu. VOL when watching a channel, adjust the volume or rmve in the left or right item ln the menu‘ 3&3” o Afifi | w mm W | 7 7 m POWERONIOFF CONNECT TO OPTICAL DIGITAL AMPLIFIER CDNNECT TO 12V TO AN EXTERNAL 0/12V SWITCH CONNECT TO THE S-VHS JACK OF TV OR VCR OONNECT VIDEO TO TV USING RCA JACK CONNECT TO AUDIO R/L TO TV OR AUDIO TUNER COMPONENT VIDEO OUT : CONNECT TO COMPONENT VIDEO INPUTS OF TV CONNECT TO AUDIO R/L TO TV OR AUDIO TUNER OONNECT TO A PC FOR SNV UPGRADE LNB IN OONNECT TO SATELLITE ANTENNA LNB OUT CONNECT TO THE OTHER RECEIVER This section expwains the mslzllau'on of XTC 5000. Refer to the manuaws suppned wrm the equwpment for the mslallatlon of outdoor equipment such as the dish antenna. When adding new equrpment, be sure m refer to the related parts of the manual for the installatron. Connecting to ANTENNA & TV TV SATELLITE DlSH DSR w m 950? 6” we CABLE VCR Connecting to TV using RCA support |/ SATELLITE DISH DSH Connecting to TV using Component support TV SATELLITE DISH DSR I] Connecting to D g tal Amp r TV SATELLITE DISH DSFI DIGITAL AUDIO CONVEHTOR OH AMPLIFIER SPEAKER IZ INS L ON WIZARD Once you properly install and connect cables of the receiver and turn the power on, the Installation wizard will be automatically displayed as below. You can start from this Installation Wizard which enables end-users to set up the receiver from a factory default or you can push CANCEL to set up the receiverfrom the main page ‘ minimum ism...“ . w w “a; You can choose your preference for language and you can push NEXT to move to next step or simply push CANCEL to go to a main page. in next page you can set up a timer and see a full list of satellite and push NEXT to set up an Antenna set up and channel search through this installation wizard nu UH \.( Win Win."
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 15 XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:3f7546cc-21cf-4292-902a-79843f602107 Modify Date : 2006:03:10 11:22:28+01:00 Create Date : 2006:03:10 11:22:19+01:00 Metadata Date : 2006:03:10 11:22:28+01:00 Document ID : uuid:ade767b3-4357-42e8-8402-7ef4e4741752 Format : application/pdf Title : Microsoft Word - 문서1 Creator : PScript5.dll Version 5.2 Author : Guest Producer : Acrobat Distiller 7.0 (Windows)EXIF Metadata provided by EXIF.tools