XTC Motorsports XTC5080PVR Digital Satellite Receiver User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	637462
Application ID	7ervLlzhNqexbyROvT1GHQ==
Document Description	Users Manual Part II
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	260.21kB (3252569 bits)
Date Submitted	2006-03-17 00:00:00
Date Available	2006-03-17 00:00:00
Creation Date	2006-03-10 11:22:48
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2006-03-10 11:22:52
Document Title	Microsoft Word - 문서1
Document Creator	PScript5.dll Version 5.2
Document Author:	Guest

You ran set up an the necessary (undions and seflings for the no SOSOPVR in this
main page
The main menu has 5 sub-menus as
lollows.
- Channel Manager
- Prugram Guide
— Tlmer
- User installation
- Utility
To move up and down, press "PR+ or PR-" To move Ian and ngnt, press ii keys on
me RCU. Piaoe cursor on the “User installation", then subamenu will be displayed on the
screen. (Refer to the picture)
14
This menu consists of 5 major sub-menus
as below.
A Antenna Setup
- Channel Search
, Syshem Setting
, Parentsl Lack
- Factory Default
”Antenna : You can select maximum 16
antennas with the combination
Switches,
2) Satellite : Select your prelerable satellite
3) LNB1, z
:Enterthe proper LNB'requenLy relening to fl
your LNB using numenc key on the RCU or use ;,.'r
KEY PAD dlsplayad by pressing 0K key.
"you have a dual LNB. enlerthe proper value
in the both olvalue box
4) Switches (0/12 Volt, 22an Tone! DISEqC) : You can select the swnches wrtn which you
want to mnfigule the antenna
5) CIKu band control : You can select C/Ku band control by switches types.
15
S) East. West Limit llllilllll -ll.llr
: Press E key on the RCU until your antenna Wlll
be reach to be easternmost and then press OK
key on lhe Rcu. The message or “Would you
like to set East limit at DiSEqC motor?" wlll be ullllllwllllm llllrlll llllniql will”
displayed tor your confirmation, please select
OK button vy pressing OK key on he RCU and
then East limit Value will be changed as SET
The usage of West llmlt ls same as Easi llmlt.
71 Reset Dissqc limit
2 It ycu want to reset the East Iimn or West Ilmit‘
place a cursoron Reset DiSEqC Limit bullon lmll ll
and then press OK key on the RCU The
message 01 “Would you like to reset limit ror
DiSEqC pcsltlonerT’ will be displayed for your
conllrmalion. please select OK button by
pressing OK key on the RCU.
The cursor will move to the East limit button so
thatyou can mse' the "mm Afler that, ”ease "ill. ll u ll llmlm l ml ill . mm, ,
reset West limit same as befure
4 mil.“
Alter selling all necessaries please push
. CH Search (BLUE KEY) on your Remote
to finish antenna setup menu and move to
channel search page.
* Short—Cut Color Keys *
Q Ant.HeIp : Antenna Direction Help (RED KEY)
. Fixed/ Disch (GREEN KEY)
. USALS/ Fixed (VELLOW KEY)
O CH Search : channel search page {BLUE KEY)
16
“Antenna : You can seled maximum 16 antenna
with the combination swfiches.
2)5atel|rte Seled your pre'elahle satellite
3) LNB1, 2
Enter the proper LNB lrequency relernng
to your LNB uslng numeric key an the RCU
or use KEY PAD displayed by pressing OK
key.
"you have a dual LNB. enlerlhe proper
value mine both oi value box.
A) Switches (0/12 Volt, zzKHz Tene/ Disch) : Vou can select the switches wilh which you
want to configure lhe antenna
5) C/Ku band control : You can select C/Ku band control by switches types
Mel sefling all necessaries. please push 0 on Search (BLUE KEV) on your Remote to finish
antenna setup menu and move to channel Search page.
17
USER INST ON
1)Anlenna ’ You can select maximum 16
antennas with the combination switches
2) Satelllla
3) LNB1, 2
. Enterthe proper LNB frequency relernng to your
LNB uslng numeric key on the RCU or use KEY
PAD displayed by pressing 0K key
Select your prelerable satellite
llyou have a dual LNB, enter the propervalue In
lhe both at value box.
the propervalue in the both elyalue box
4) Switches (0/12 Volt, 22KH= Tone. DiSEqC)
. You can select the switches with which you want
Io configure the antenna
5) ClKu bane eentrel . You can select C/Ku band
central by switches types.
menu and move to channel search page
Altersetting all necessaries please press “Go to Sat Pnsition" ta finlsh USALS antenna setup
" the default value it "OFF".
* lenditim hr usiII] USALS
function.
-> check if the position of the antenna
motoris on "fl”degme.
-> Now the maximum limit of the
antenna is 1 meter.
when you choose the satellite ofwhich
you want to use the USALS function,
its direction and longitude will be
displayed.
Input Your Longitude and Your
Latitude.
(Please refer to the manual attached to
the USALS Motor.)
It m7! search hr "Satellite Location "
and automatically m7 to the channel
Sealdl screen.
USER INSTALL TION
1) Antenna :5elect your antenna number.
z) satelllte Seleet a satellite using .
keys or ll you press OK key.
Then, the list at satellite wlil be
dlsplayed so that you can select
eastty
You can set) me information a!
(he selecled satellite In the right
side.
a) Pesmen Afler seleetrng e satellney pleeee
select Pesltlon button and then
keep presslng E or w key on the
RCU unIiI selemsd setellrte IS
locked. ll the satelllte ls locked
correctly the white color or signal
label har w." be changed to
yellow
When you press OK key on the
RCIJ. the massage o'“WcuId you
like to set the value olcurrent
poslllonefl'will be displayed tor
your eonnrrnehon
4) Transponder
Press OK key to select one of
the transponders
5) Frequency, symbol R1“, Pelerlntlon a
man
You can press 0 Edit (vmow KEV) on the
RCU and cheese ‘Modlly TP On/Ofl' to change
the values In these lunctrens.
19
5) O CH Selrchl Advance (BLUE KEV)
* Selection : All/ FTA Only
ch can Search eitheer channels or FTA only
‘k Son : FTN GAS! A~ZI OFF
You can Search Elmer FTA channels, Scrambled
channels. A~Z or all channels.
* NIT: On! 0"
Search Channels transmitted by satellite "WM“
network information table (NIT)
* Search : SAT! TFI PID
l) Search channels in one satellite which lliiiiirl'ri vi n
selected on Satellite columns
2) Search channels in one TP which
selected on TP column r r ,
3) Search channels m one PID which
selected on PID column
run in n n
1) Delete TF
You can press 0 Edit (YELLOW KEV) and select
"Delete T?" to delete any oithe transponders listed
s) Rename SAT
. ltyou want to change the narne oia satellites. select a salellile and press 0 Edit (YELLOW KEV)
and choose "Rename SAT" and keypad dialog box will be displayed and then you can change the
name at a salelllle by uslrlg an arrow keys on the key pad
9) Snroh : Met all the set up tor a channel Search you can press “SEARCH” to scan the channels
by a satellite. TP or nelwolkv
* Short-Cut Color Keys *
. Edit (Edit Mod!) (YELLOW KEV)
Please press 0 Edit key on the RCU to display the sub-command box and edit the ore-programmed
data eueh 3: Frequency, Symhorete, Palari’zaticrl, 22KHz.
You can also use “Delele TF” & “Rename SAT” as well In this Edit Mode
0 Rn»synu (GREEN KEV)
When all location 01 searched satellites are shlfied by unknown reason, you can reallgn all M them at
once If you adjust one satellites locallonl
20
USER INST ON
1) Antenna :Selecl youraMenna number.
Z) Sa'EIIite elect a desired salellite using
._ as keys or it you press OK key,
me list 01 satellile will be
displayed 50 Ihat you can select
easily.
You can see (he irflormalion o!
selecled satellite in the nghl side
4) ~ 9) Please reler lo DiSEqC l 2
type amennal
.Eded“Modet * Short—Cut Color Keys t
Please press 0 Ed“ key on me Rcu lo display |he sub-command box and ed|t the pre'programmed
data such as Frequency, Symborahe, Polarizafion, ZZKHz.
You can also use “Delete TP" & “Rename SAT“ as well in (his Edit Mode.
21
USER INSTA
hannel Searc
USA
1) Antenna Select your antenna number. ”Ml”
2) Satellite Select a desired satellite using
:-r a: keys or it you press OK key,
the list oi satellite will be
displayed so that you can salad
easily.
You can see the lnl‘ormafion of
selected satellite in the right side.
4) ~ 9) Please reler to Dlsch 12
type antenna,
Aflev searching tor SATELLlTE 1,ctroese "W
another satellite on the CHANNEL SEARCH
screen. it will automatically locate the satellite
and search tor SIGNAL to start channel
searching.
* Short—Cut Color Keys *
0 Edit (Edit Mode) (YELLOW KEY)
Please press . Edit key on the RCU I0 display the sub-command box and edit the Dre-programmed
data such as Frequency, Symborate, Polarizatlun, ZZKHx.
you can also use “Dalale TP" & “Rename SAT" as well in this Edit Mode.
0 Re—syne (GREEN KEV)
When all location oi searched satellites are shifted by unknown reason, you can realign all oi them at
once If you adjust one satelllie's location.
22
USER INSTALL ION
XTC SOBOF’VRenables end users to have a
mum-SAT search in each antenna type such as
fixed, DlSEqC1 2 and DlSEqC1 a
Alter all the necessary antenna set-up. simply
press OCH Search/ Advance (BLUE KEY) to
open a search optlons.
You can choose one at the opttons and press
SEARCH and you are automatically moved to
mum-sat search box and you can choose all the
satellites you are searching for.
“WWW” * Short—Cut Color Keys *
Please press 0 Edlt key on the RCU to dlsplay the sub-command box and edit the pre-
programmed data such as Frequency, Symborate, Polarlzatlon. ZZKHz.
You can also use “Delete TP" & "Rename SA " as well in this Edit Mode.
0 Re—Sync
When all location of searched satellltes are shlfled by unknown reason. you can reallgn all 01
them at once If you adjust one salellile’s location.
23
USER INSTALLATION
System Setung menu allows you to change the the principal option and to set other items proper to
‘
yourenvtlanmenl by pressmg OK key on the RCU.
l) OSD Languagt :Select yourdesired OSD
Language
2) Audio Language - Select yourdesired audio
language to be in the top
priority under the condition that this
language is supported from the channel.
3)subti - Languag
Subtitle Language
elect your desired
4) LNB pomr : The default value at LNB
power is ON Salem 0" in the case 0! the
LNB power is not necessary.
5) Susan Format . it your TV supports 16.9
screen format and selected channel
provides 169 lonnat program, select 15:9.
0) TV typo : Select the type according
to your TV type.
7) Display into sat - You can select the
second lnlo Bar displayed on the screen.
a) start On Chanml, If you press OK key, then
the channel lis displayed. You can
selec1 one channel of the list. the selected
channel starts whenever you turn on
Brand Name.
9) 05ch Repeat 1 Select your Disch.
Parental Lock
This lunclion allows you lo lock the channel
wrlh your password in order lo prevenl lrorn
accesslng lhe channel by your chlldren or any
olher person
And also you can prolecl your rnslalled daxa
and informalion using lnslall Lock.
* How lo change Password
1) Enlerlhe currenl password.
2) Select ON 01 Parent Lock
3) Enter new password
4) Confirm your new password enlerlng new
password again,
Nata Default password ls 0000
Warning Do nol forgel your password in
order no: lo farl ta view the channel.
25
v no“ ll‘
* How (0 use Parent Lock
1) ii you activate parent lock function. go to the TV
channel Manager Page
2) Press One" command box and selecl Lock
3) Select channel the which you want to Look
4) Press OKthen (D symbol is marked.
5) Exn this menu and Turn ontne Brand Name
Note To activate Parent Lock. you have to turn
off XTC 5080PVRonce. And (um on (he XTC
5080PVRand selecl channel which is locked
Then enter your password
* How m use 1mm" Lock
1) Emerthe currem password.
2) Select ON or install Lock
3) Enler new password
4) Confirm your new password enlenng
new password again
5) Exll this menu and Turn oil the Brand
Name
6) Turn on XTC somPVRand press MENU
key on lhe RCU
7) Select any menu and press OK.
8) Then Enter Password Box will be
displayed
9) Unless enleroorrect password, you can
nol run any menu.
Note Default password is com
Warning , Do not forge! your password In
order not to fai/ to operate xrc sosopvr?
Factory Default
ll you want to bring x‘rc 5080PVRback to
the factory default Condlllon, select Faclory
Default and press OK key.
Then Warning message will be displayed.
To confirm select OK and press OK key.
Warning : Vou will lose all of data and
information Whlch was Installed.
26
GENERAL FU ION
The following describes the basic tunctions of your
XTC SOBOPVR while watching satellite TV or
listening to satellite radio.
x‘rc 5050ka enables you to walch various
scrambled channels by inseiting the Smaitcards
according to your choice.
While watching the current channel iniormation
will be shown on the bottom of the screen it you
press INFO button on the RCU
Select Channel
it you wanl to select channel, use CH key on lhe
lront panel Pm, PR- key on the RCU or numeric
key on the RCU to select a channel and press OK
key on the RCU.
In nddllion lo the above normal function XTC
SOSOPVRprovldes more convenlent channel
change funclicn.
While watching, press DKILIST key on the RCU or
lront panel Then channel list will be displayed on inilmii l
the screen. I! press EXIT key the channel “5! WIII rill
be disappeared. , imii
You can sort channel list by All. Favorite group,
Satellite, Alphabet, CAS as lollows
1) All ‘I! shows you all channel
list sort by alphabet
2) Favorlte group ' You can make lavanle
group in the menu pl ‘ sl‘ji‘im i Jill
channel manager lt shows i
that group, and you can 2m," n rlf‘” "” ”m
select one lavonte group, ,
then channel list belongs
that group will be displayed
3) Satellite it you select ‘Salellite', the
list of satellite searched in
XTC 5080PVRwlII be
displayed Then you can
select satellite you want.
Alter that. you can see
channel list belongs to the
satellite.
4) Alphabet s it you select A or B...
channel Iisl(head of channel
name A (Jr B )will be
displayed.
5) CAS. llyou select ‘CAS', you can sort lhe
channels by CA system
—
27
GENERAL FUNCTION
Pause the frame
Press PAUSE key on the RCU to pause the
screen, To bring it back to the normal mode.
press PAUSE key once again.
~ Only Vldeo Will be paused during PAUSE
lunelien (Audio is active)
Previous channel recall
Press ePR key on the RCU to move the
previous enannel which you watched before.
TV & Radio switching
While viewing TV channel, press TV/RADIO key
on the RCU to move radio mode. Press this key
once again, il will bring you back in the TV mode
TV & VCR mode
While viewing salellite channel, press TV/AV
key on the RCU to move TV mode. Press this
key onoe egern, it will bring you to the VCR
mode To move satellrle channel, press lnrs key
once again
More ‘ In this case, you can see the current
mode through LED display on the front panel
“This function will be plDl/fded with "Sean"
Cmmectolv

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 15
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:4ac3526d-1f25-45f5-beeb-43e02cc92909
Modify Date                     : 2006:03:10 11:22:52+01:00
Create Date                     : 2006:03:10 11:22:48+01:00
Metadata Date                   : 2006:03:10 11:22:52+01:00
Document ID                     : uuid:403c86f9-f5d7-4b8a-ba32-ddcdb822e63d
Format                          : application/pdf
Title                           : Microsoft Word - 문서1
Creator                         : PScript5.dll Version 5.2
Author                          : Guest
Producer                        : Acrobat Distiller 7.0 (Windows)

EXIF Metadata provided by EXIF.tools