XYZprinting 3F21X 3D Printer User Manual HD23F21X006 QUICK GUIDE EN R1 indd
XYZprinting, Inc. 3D Printer HD23F21X006 QUICK GUIDE EN R1 indd
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2273866 |
| Application ID | W7JWLshF4cvlO7mNbCKDFw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 182.25kB (2278126 bits) |
| Date Submitted | 2014-05-22 00:00:00 |
| Date Available | 2014-05-22 00:00:00 |
| Creation Date | 2014-05-08 18:59:07 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2014-05-08 18:59:07 |
| Document Title | (HD23F21X006)QUICK GUIDE_EN_R1.indd |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | TB395010 |
ENG ENG Product name: 3D Printer Product Manual P.2-P.4 Advanced Maintenance Tools P.5 Print Bed adjustment P.6 Service Code Informations P.7 -1- ENG Product Manual Filament Slot Speaker Display Panel Remove the packaging supports Extruder Module Z-Axis LAN Port USB Port Front Door Print Bed Power Switch Remove the print bed ďŹxing screws and printing module ďŹxers Power Connector Overview This guide provides details on how to start off your da Vinci 2.1 Duo Plus 3D printer correctly. Please read the instructions before starting to print. ⢠How to open the box safely ⢠How to load ďŹlament ⢠Getting to know XYZWare software GLUE STICK ĆUser Quick Guide ĆCartridge Locker x2 ĆGlue Stick Ć Scraper Ć Copper Brush ĆUSB Cable ĆPower Cord ĆFilament Cartridge x2 ĆUSB Flash Driver ĆDecorative Plate x2 Ć Cleaning Wire x 5 Important safety Instruction ⢠Do not place the printer in humid or dusty environment such as bathrooms and high traffic areas. ⢠Do not place the printer on a rickety surface and/or inclined position. Printer may fall down/or tumble and it may cause serious injury. ⢠Do not touch the interior of the printer while printing. As it may be hot and include moving parts. Please keep the front door closed during printing to avoid injury. -2- ENG Product Manual Open the box PRINT ING GLUE STIC 1 Open the box and remove the accessories and the cushion. 2 Take out the printer by holding the grip holds. 3 Remove plastic bag and tapes. Packing supports x2 Cable tie x1 Tapes x2 4 Open the top door, then remove packaging supports and tapes. 6 Remove the tapes and cardboard. 5 Remove the print bed ďŹxing tapes and cushion. 7 Remove the screw and plastic piece under print bed. 8 Remove the drip tray ďŹxing tapes. 9 Connect the printer to your PC first using USB cable then turn on the power switch. Initial Settings ⢠After powering on the printer for the ďŹrst time, complete the simple setup as instructed on the screen. Then select language and press "Next" to proceed. -3- ENG Product Manual Install Cartridge 1 Remove the ďŹlament stopper. 2 Install new ďŹlament cartridge into the empty slot. 3 Place and push to ďŹx the cartridge locker to the slot. 4 Select "Filament" > "Cartridge 1" > "Load". Do Not Touch. Cartridge 1 Guide Hole 1 Guide Hole 1 Do Not Touch. Guide Hole 2 Guide Hole 2 Cartridge 2 5 Insert ďŹlament into the guide hole until the printer starts to load ďŹlament. (When the loading begins, you will hear the sound of motor and can see the ďŹlament is pulled into the printer.) 6 When ďŹlament is dripping off the nozzle, tape "OK" to ďŹnish. Note: If ďŹlament loading failed, grasping the release arms may help to ďŹx the issue. -4- ENG Product Manual Sample Print Apply glue to print bed before printing. Glued area depends on the flat measurement or object to be printed. 1 Select "Print" > "Sample" on the screen. PRINTING 2 Select a sample to print, and tap "Print". 3 After the printing is completed and the print bed became cool, use a scraper to take out the object. 4 Finally use a damp cloth to clean the print bed. -5- Product Manual & Maintenance Tools ENG Unload filament Note: Please always complete the procedure for "FILAMENT UNLOADING" before changing a new cartridge. Never cut off the ďŹlament from the extruder to prevent extruders from clogged. 1 Select "Filament" > "Cartridge1" (or "Cartridge 2") > "Uninstall" on the screen. 2 Filament is unloaded from extruder automatically. Pull ďŹlament out from the guide hole when prompted. 3 When ďŹlament is pulled out, press "OK". 4 Remove cartridge locker and the catridge. important safety Instruction The maintenance tools provided should be only handlde by an adult. Please keep tools away from children. Incorrect handling or maintenance of the printer may cause damage to the product or personal injury. Information and usage of the advanced maintenance tools PRINTING Ă Scraper Scraper is used to remove printed object from print bed when printing ďŹnished. (Caution: Do not remove the printed object while the print bed is hot.) ĂŻ Cleaning Wire Cleaning wire is used to remove the ďŹlament left in the path inside the clogged nozzle when the moiten ďŹlament has affect printing quality. (Caution: Print bed may be hot during cleaning, please keep away from the platform to avoid personal injury.) When cleaning the print nozzle, gear or ďŹlament path please ensure to keep hands clear of the print bed which may be hot. ĂŻ Copper Brush Cooper brush is used to clean and remove moiten filament left on the tip or surface of the extruder(s) and inside the drive gear. When the printer falls to "Calibrate" consistently, please use the cooper brush to clean and remove the ďŹlament pieces from the extruder(s). -6- ENG Maintenance Tools Specifications Feature da Vinci 2.1 Duo Plus 3D Printer Print Technology Fused Filament Fabrication(FFF) Print Head Dual Head Build Volume (W x D x H) 15 x 20 x 20 cm Layer Resolution Setting Standard Speed Ultra fast Custom Filament Diameter 1.75 mm Nozzle Diameter 0.4 mm AC Input 100-240V, 50~60Hz Connectivity USB 2.0 x1 WiFi LAN USB Flash Driver Display Touch Panel Indicator Speaker Indicator Buzzer Lighting LED Weight 28.5 Kg 200 microns 300 microns 400 microns 100-400 microns Know about XYZware Import View Move Rotate Scale Info Remove Export Save Print Settings Help For Mac OS and Win8 / 8.1 user or software related topics, please visit following webpage for further information and download the proper XYZware version: http://support.xyzprinting.com/downloads ËĽXYZwareËŚis developed by XYZPrinting Inc. It is designed for everyone with or without modeling skill. You can view the model in various perspectives by importing (*.stl) ďŹle to it. It is also used to print objects from da Vinic 3D printer. XYZWare can be found in the bundle installation disc. To check our latest software updates and further information. Please go to: http://support.xyzprinting.com/manuals ćžżNotice: Some instruction and video tutorials might require online registration to obtain authorization. -7- Print Bed Adjustment Instructions ENG This print bed has been calibrated by our professional technician before shipment. Do not adjust the platform yourself unless necessary, or contact our Technical Consultingďź0809-016-225 To clean the molted ďŹlament from nozzle thoroughly, it is recommended to activate âUNLOAD FILAMENTâ function to keep heating the extruder for better cleaning. Print bed adjustment flow chart Step Step Step Step Step 3HUIRUPDJDLQ Instructions on print bed adjustment 1 &KHFNLISULQWHUILUPZDUHLVXSGDWHGWRWKHODWHVWYHUVLRQ 7DS6HWWLQJV!6\VWHP6HWWLQJV!$ERXW!)LUPZDUH9HUVLRQ!2. 2 Perform calibration: Select "Settings" > "Printer Settings" > "Maintenance" > "Calibrate Print Bed" > "OK". &DOLEUDWLRQ&RPSOHWHG &DOLEUDWLRQ1RW&RPSOHWHG 3 I. If ADJUST SUCCESS is shown. The printer does not need adjustment and press OK to exit. II. If ADJUST FAIL is shown. The printer needs adjustment, refer to the values shown. Note: During the measurement process, the print bed and print module will be heated. Care should be taken during operation! -8- Print Bed Adjustment Instructions Location of the PHDVXUHPHQWSRLQWV 4 Refer to the values for adjustment Adjust the location of the screws ENG I. Adjust the screw at Point A to reduce the difference between the 1st and the 2nd measurements. II.Adjust the screw at Point B based on your evaluation of the results obtained from the previous steps. View the printer from the front when making adjustment Rotate the screw to the left to raise the bed (value increases) Rotate the screw to the right to lower the bed (value decreases) Each turn leads to a change of 50 to the value shown çReminder 5 After the adjustment is finished, perform step 2. Wait until ADJUST SUCCESS is shown and press OK to complete calibration. If the value shown is always 999,999,999, follow the steps below to clean. A. Clean the surface of the print head using the copper brush. (Clean the contact point between the print head and print bed) B. Wipe and clean the measurement points in reference with Figure 4. C. Perform the calibration process again. -9- Print Bed Adjustment Instructions ENG )RUIXUWKHULQIRUPDWLRQDQGLQVWUXFWLRQRIWKHVHUYLFHFRGHSOHDVHUHIHUWR;<=SULQWLQJZHEVLWH KWWS VXSSRUW[\]SULQWLQJFRP RUFRQWDFWVHUYLFHFHQWHUIRUKHOS Service Code Display Panel Description çľçľçľ Extruder or heated bed higher/lower than maximum/minimum temperature during printing çľçľçľ Extruder cannot heat to the specified temperature çľçľçľ Print bed heating error; critical temperature detected çľçľçľçľ Extruder(s) heating error; critical temperature detected çľçľçľ çľçľçľ çľçľçľ X axis motor failed results moving failed or X axis home sensor failed results home detect failed Y axis motor failed results moving failed or Y axis home sensor failed results home detect failed Z axis motor failed results moving failed or Z axis home sensor failed results home detect failed çľçľçľ Memory storage cannot read/write çľçľçľ Flashrom cannot read/write -10- Print Bed Adjustment Instructions ENG )RUIXUWKHULQIRUPDWLRQDQGLQVWUXFWLRQRIWKHVHUYLFHFRGHSOHDVHUHIHUWR;<=SULQWLQJZHEVLWH FCC Statement KWWS VXSSRUW[\]SULQWLQJFRP RUFRQWDFWVHUYLFHFHQWHUIRUKHOS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can Display Panel Description Service Code radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that çľçľçľ Extruder or a heated bed higher/lower than maximum/minimum during printing interference will not occur in particular installation. If this equipment doestemperature cause harmful interference to radio or television reception, which can be determined by turning the equipment Extruder cannot heat to the specified temperature çľçľçľ off and on, the user is encouraged to try to correct the interference by one or more of the following measures: çľçľçľ Print bed heating error; critical temperature detected âReorient or relocate the receiving antenna. âIncrease the separation between the equipment and receiver. Extruder(s) heating error; critical temperature detected çľçľçľçľ âConnect the equipment into an outlet on a circuit different from that to which the receiver is X axis motor failed results moving failed or X axis home sensor failed results home connected. çľçľçľ âConsult the dealer or anfailed experienced radio/TV technician for help. detect Y axis motor failed results moving failed or Y axis home sensor failed results home FCC Radiation Exposure Statement çľçľçľ detect failed This device complies with FCC radiation exposure limits set forth for an uncontrolled environment axis motor failed results failedThis or Z axis home sensor failed resultsand home and it also compliesZ with Part 15 of the FCCmoving RF Rules. equipment must be installed operated çľçľçľ in accordance withdetect provided instructions and the antenna(s) used for this transmitter must be installed failed to provide a separation distance of at least 20 cm from all persons and must not be co-located or Memory storage cannotantenna read/write çľçľçľ in conjunction operating with any other or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement. çľçľçľ Flashrom cannot read/write This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. -10-
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : TB395010 Create Date : 2014:05:08 18:59:07+08:00 Modify Date : 2014:05:08 18:59:07+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : TB395010 Title : (HD23F21X006)QUICK GUIDE_EN_R1.indd Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2014:05:08 18:58:08+08:00 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:ad5a61e4-0ad4-415e-a474-d943752bd911 Instance ID : uuid:f37053e2-3db7-4e78-b29c-90b4670e6d8b Page Count : 11EXIF Metadata provided by EXIF.tools