XceedID MT20W The MT20w is a Credential Enrollment Reader for access control systems. User Manual

XceedID Corporation The MT20w is a Credential Enrollment Reader for access control systems. Users Manual

Users Manual

MT20w Enrollment ReaderUser Guide
AptiQ • MT20w Enrollment Reader User Guide • 3Table of ContentsOverview .................................................................................... 4Operational Behavior ................................................................. 5 Communication ..................................................................... 5 Output ................................................................................... 5 RF Field ................................................................................. 6Conguration Card ..................................................................... 6Specications ............................................................................. 7 Reader Specications ........................................................... 7 Card Specications ............................................................... 7Card Technologies Supported ................................................... 8 125kHz Technologies ............................................................ 8 13.56MHz Technologies ........................................................ 8Notes ......................................................................................... 9
4 • AptiQ • MT20w Enrollment Reader User Guide OverviewOverviewThe aptiQ MT20w multi-technology enrollment reader is designed to simplify the enrollment of proximity and smart credentials by using a computer’s USB connection. The MT20w does not require software to operate, and will function on any operating system.The MT20w is an ISO14443 and ISO15963 contactless credential reader, and is compatible with aptiQ smart credentials (MIFARE Classic and MIFARE DESFire EV1), aptiQmobile credentials, PIV credentials, and most proximity credentials up to 37-bits.Connect the reader’s USB to your operating system. You will see a series of green/red LED ashes and beeps: 2 green LED ashes. 1 red LED ash, followed by a beep. 3 red LED ashes, with each ash followed by a beep.The LED will then turn red and stay on, indicating that the reader is ready. If the LED and the beeper do not respond, check the cable connections.Put the cursor in the desired eld to receive the output and present a valid credential. You will see a series of green/red LED ashes, along with a beep: Red LED will ash to green, followed by a beep. Green LED will ash back to red and stay on, indicating the reader is again ready for the next valid credential.The enrollment reader output will place the information from the credential to the cursor’s location on the screen. If a non-valid credential is presented to the enrollment reader, the red LED will not change, and there will be no beep.Spanish and French translations are online at www.allegion.com/us.
AptiQ • MT20w Enrollment Reader User Guide • 5 Operational BehaviorOperational BehaviorCommunicationThe MT20w Enrollment Reader communicates over USB.OutputThe USB connection uses Human Interface Device (HID) Keyboard Interface that requires the user to put the cursor in the desired eld to receive the output. The default output is (Hexadecimal) for the NDE “ENGAGE” product. There are other outputs available and they can be ordered when ordering the enrollment reader. If you ordered the default output and now require a different output, please contact Allegion Technical Support at 1-877-671-7011, option 2. The following are the outputs available.Output Examples:The examples provided were read from a 26 bit card FC 55, BID 1546  Default Conguration - CE-401-073  For use with ENGAGEv Web Application Example - 26E0C15;26A;55;1546; Octal Output - CE-401-061 For use with Schlage Express Example - 0000000633406025 FC/BID Output - CE-401-060 (SUSB89 default) For use as Keystroke Emulator Example - 55000001546 BID Only - CE-401-069  For use as Keystroke Emulator Example - 000001546Note: Please proceed to the following link to nd a list of card formats supported by the ENGAGE (NDE) Web app. www.allegionengage.com
6 • AptiQ • MT20w Enrollment Reader User GuideConfiguration CardOperational BehaviorConfiguration CardUsing a Conguration Card to change enrollment readers outputTo change the enrollment reader output you will need a conguration card.  Power cycle the reader After reader has powered up and within 60 seconds present the conguration card to the reader. The reader will conrm the conguration change by: 2 short beeps 2 ashes of Red LED The reader will then reset itself 2 green LED ashes + beeps 1 red LED ash + beep 3 Red LED ashes + 3 beeps The LED will then turn red and stay on, indicating that the reader is ready.RF FieldEvery 100ms the RF eld turns on and the reader polls for cards. The 13.56 MHZ eld is on for approximately 42 ms in the default reader conguration, which is maximum complexity. The 125 kHZ eld is on for approximately 20 ms in the default reader conguration, which is maximum complexity.
AptiQ • MT20w Enrollment Reader User Guide • 7Reader SpecificationsSpecificationsSpecificationsReader SpecificationsPhysical Dimensions (L x W x H) 5.56” x 2.00” x .695”Operating Temperatures 0 to 40 CFrequency 125 kHz & 13.56 MHzWeight 4.1 ozPower Supply Connect to powered USB port or via USB powerInterface USBCurrent Requirement 110 mAMax Current Requirement 275 mACard SpecificationsCard Read RangesCard Frequency Card Type Read Range125 kHz ASK, FSK Up to 2.5” (6.3 cm)13.56 MHz ISO 15693 Up to 3.0” (7.6 cm)13.56 MHz ISO 14443A MIFARE® Standard Up to 2.0” (5.1 cm)13.56 MHz ISO 14443A MIFARE® DESFire EV1 Up to 1” (2.5 cm)
8 • AptiQ • MT20w Enrollment Reader User GuideCard SpecificationsCard Technologies SupportedCard Technologies Supported125kHz TechnologiesGE®/CASI® ProximityHID® Proximity (up to 37-bits)AWID® ProximityLenelProx®13.56MHz TechnologiesISO14443 MIFARE DESFire EV1 with PACSA enabledISO14443 Secure MIFARE Classic: XCeedID MIFARE app enabled OESM (dormant - ready to be enabled by end-user)ISO14443 PIV enabled 75-bit format (other formats available)iClass/CSN enabled 64-bit formatISO15693 CSN enabled 64-bit formatISO14443 CSN disabled (can be enabled using the conguration card)aptiQmobile
AptiQ • MT20w Enrollment Reader User Guide • 9Card SpecificationsNotesNotes
10 • AptiQ • MT20w Enrollment Reader User GuideCard SpecificationsNotesNotes
AptiQ • MT20w Enrollment Reader User Guide • 11This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Part 15.21 StatementChanges or modications not expressly approved by the XceedID Corporation to this device could void the user’s authority to operate the device.FCC part 15.105 StatementThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.Industry Canada StatementThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.© 2015 Allegion – ALL RIGHTS RESERVEDDocument Part Number: xxxxxxxxx – Revision A – 08/15Windows is a trademark of Microsoft Corporation.The trademarks used in this manual are the property of the trademark holders. The use of these trademarks in this manual should not be regarded as infringing upon or affecting the validity of any of these trademarks.Allegion reserves the right to change, without notice, product offerings or specications.No part of this publication may be reproduced in any form without the express written permission of Allegion.Customer ServiceU.S.A.: 877-671-7011www.allegion.com/usRevisionCheck www.allegion.com/us for latest product revisions.Contact InformationShould a system design engineer or developer need assistance, contact XceedID at:Allegion500 Golden Ridge Road Building 1, Suite 160 Golden, CO 80401Phone: 1-877-671-7011Fax: 1-866-954-1779www.allegion.com/us
© 2015 Allegion xxxxxxxxx, Rev. 08/15www.allegion.com/usAllegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands like CISA®, Interflex®, LCN®, Schlage® and Von Duprin®. Focusing on security around the door and adjacent areas, Allegion produces a range of solutions for homes, businesses, schools and other institutions. Allegion is a $2 billion company, with products sold in almost 130 countries. For more, visit www.allegion.com.About Allegion
Additional Notes: Revision History Revision Description:A > Revised artwork1. Printed saddle-stitched booklet A B C D E F063451MaterialWhite PaperEdited By Approved By EC Number Release DateD. Toppins M. Sasso 063451 08-28-15Notes1. printed two sides2. Printed saddle-stitched booklet2. printed black3. tolerance ± .134. printed in country may vary5. drawings not to scaleTitleMT20w Enrollment Reader UGCreation Date07-20-15NumberxxxxxxxxxRevisionACreated ByD. Toppins Activity3899 Hancock ExpwySecurity, CO 80911 © Allegion 2015Software: InDesign CS68.50 4.255.50 5.50BEGINNING SHEET FINAL SIZEFRONT FRONT

Navigation menu