XceedID MT20W The MT20w is a Credential Enrollment Reader for access control systems. User Manual
XceedID Corporation The MT20w is a Credential Enrollment Reader for access control systems. Users Manual
XceedID >
Users Manual
MT20w Enrollment Reader User Guide Table of Contents Overview..................................................................................... 4 Operational Behavior.................................................................. 5 Communication...................................................................... 5 Output.................................................................................... 5 RF Field.................................................................................. 6 Configuration Card...................................................................... 6 Specifications.............................................................................. 7 Reader Specifications............................................................ 7 Card Specifications................................................................ 7 Card Technologies Supported.................................................... 8 125kHz Technologies............................................................. 8 13.56MHz Technologies......................................................... 8 Notes.......................................................................................... 9 AptiQ • MT20w Enrollment Reader User Guide • 3 Overview Overview The aptiQ MT20w multi-technology enrollment reader is designed to simplify the enrollment of proximity and smart credentials by using a computer’s USB connection. The MT20w does not require software to operate, and will function on any operating system. The MT20w is an ISO14443 and ISO15963 contactless credential reader, and is compatible with aptiQ smart credentials (MIFARE Classic and MIFARE DESFire EV1), aptiQmobile credentials, PIV credentials, and most proximity credentials up to 37-bits. Connect the reader’s USB to your operating system. You will see a series of green/red LED flashes and beeps: 2 green LED flashes. 1 red LED flash, followed by a beep. zz 3 red LED flashes, with each flash followed by a beep. zz zz The LED will then turn red and stay on, indicating that the reader is ready. If the LED and the beeper do not respond, check the cable connections. Put the cursor in the desired field to receive the output and present a valid credential. You will see a series of green/red LED flashes, along with a beep: zz zz Red LED will flash to green, followed by a beep. Green LED will flash back to red and stay on, indicating the reader is again ready for the next valid credential. The enrollment reader output will place the information from the credential to the cursor’s location on the screen. If a non-valid credential is presented to the enrollment reader, the red LED will not change, and there will be no beep. Spanish and French translations are online at www.allegion.com/us. 4 • AptiQ • MT20w Enrollment Reader User Guide Operational Behavior Operational Behavior Communication The MT20w Enrollment Reader communicates over USB. Output The USB connection uses Human Interface Device (HID) Keyboard Interface that requires the user to put the cursor in the desired field to receive the output. The default output is (Hexadecimal) for the NDE “ENGAGE” product. There are other outputs available and they can be ordered when ordering the enrollment reader. If you ordered the default output and now require a different output, please contact Allegion Technical Support at 1-877-671-7011, option 2. The following are the outputs available. Output Examples: The examples provided were read from a 26 bit card FC 55, BID 1546 zz Default Configuration - CE-401-073 {{ For use with ENGAGEv Web Application Example - 26E0C15;26A;55;1546; zz Octal Output - CE-401-061 {{ For use with Schlage Express Example - 0000000633406025 zz FC/BID Output - CE-401-060 (SUSB89 default) {{ For use as Keystroke Emulator Example - 55000001546 zz BID Only - CE-401-069 {{ For use as Keystroke Emulator Example - 000001546 Note: Please proceed to the following link to find a list of card formats supported by the ENGAGE (NDE) Web app. www.allegionengage.com AptiQ • MT20w Enrollment Reader User Guide • 5 Operational Behavior Configuration Card Configuration Card Using a Configuration Card to change enrollment readers output To change the enrollment reader output you will need a configuration card. Power cycle the reader After reader has powered up and within 60 seconds present the configuration card to the reader. zz The reader will confirm the configuration change by: {{ 2 short beeps {{ 2 flashes of Red LED zz The reader will then reset itself {{ 2 green LED flashes + beeps {{ 1 red LED flash + beep {{ 3 Red LED flashes + 3 beeps zz The LED will then turn red and stay on, indicating that the reader is ready. zz zz RF Field Every 100ms the RF field turns on and the reader polls for cards. The 13.56 MHZ field is on for approximately 42 ms in the default reader configuration, which is maximum complexity. The 125 kHZ field is on for approximately 20 ms in the default reader configuration, which is maximum complexity. 6 • AptiQ • MT20w Enrollment Reader User Guide Specifications Reader Specifications Specifications Reader Specifications Physical Dimensions (L x W x H) 5.56” x 2.00” x .695” Operating Temperatures 0 to 40 C Frequency 125 kHz & 13.56 MHz Weight 4.1 oz Power Supply Connect to powered USB port or via USB power Interface USB Current Requirement 110 mA Max Current Requirement 275 mA Card Specifications Card Read Ranges Card Frequency Card Type Read Range 125 kHz ASK, FSK Up to 2.5” (6.3 cm) 13.56 MHz ISO 15693 Up to 3.0” (7.6 cm) 13.56 MHz 13.56 MHz ISO 14443A MIFARE® Standard ISO 14443A MIFARE® DESFire EV1 Up to 2.0” (5.1 cm) Up to 1” (2.5 cm) AptiQ • MT20w Enrollment Reader User Guide • 7 Card Technologies Supported Card Specifications Card Technologies Supported 125kHz Technologies GE®/CASI® Proximity HID® Proximity (up to 37-bits) AWID® Proximity LenelProx® 13.56MHz Technologies ISO14443 MIFARE DESFire EV1 with PACSA enabled ISO14443 Secure MIFARE Classic: zz zz XCeedID MIFARE app enabled OESM (dormant - ready to be enabled by end-user) ISO14443 PIV enabled 75-bit format (other formats available) iClass/CSN enabled 64-bit format ISO15693 CSN enabled 64-bit format ISO14443 CSN disabled (can be enabled using the configuration card) aptiQmobile 8 • AptiQ • MT20w Enrollment Reader User Guide Notes Card Specifications Notes AptiQ • MT20w Enrollment Reader User Guide • 9 Notes Notes 10 • AptiQ • MT20w Enrollment Reader User Guide Card Specifications This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Statement Changes or modifications not expressly approved by the XceedID Corporation to this device could void the user’s authority to operate the device. FCC part 15.105 Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Industry Canada Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. © 2015 Allegion – ALL RIGHTS RESERVED Document Part Number: xxxxxxxxx – Revision A – 08/15 Windows is a trademark of Microsoft Corporation. The trademarks used in this manual are the property of the trademark holders. The use of these trademarks in this manual should not be regarded as infringing upon or affecting the validity of any of these trademarks. Allegion reserves the right to change, without notice, product offerings or specifications. No part of this publication may be reproduced in any form without the express written permission of Allegion. Customer Service Contact Information U.S.A.: 877-671-7011 www.allegion.com/us Should a system design engineer or developer need assistance, contact XceedID at: Revision Allegion Check www.allegion.com/us for latest product revisions. 500 Golden Ridge Road Building 1, Suite 160 Golden, CO 80401 Phone: 1-877-671-7011 Fax: 1-866-954-1779 www.allegion.com/us AptiQ • MT20w Enrollment Reader User Guide • 11 About Allegion Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands like CISA®, Interflex®, LCN®, Schlage® and Von Duprin®. Focusing on security around the door and adjacent areas, Allegion produces a range of solutions for homes, businesses, schools and other institutions. Allegion is a $2 billion company, with products sold in almost 130 countries. For more, visit www.allegion.com. © 2015 Allegion xxxxxxxxx, Rev. 08/15 www.allegion.com/us 8.50 4.25 FRONT FRONT 5.50 5.50 BEGINNING SHEET FINAL SIZE Additional Notes: 1. Printed saddle-stitched booklet Revision History Revision Description: a > Revised artwork 063451 Material White Paper Notes 1. printed two sides 2. Printed saddle-stitched booklet 2. printed black 3. tolerance ± .13 4. printed in country may vary 5. drawings not to scale Edited By Approved By EC Number Release Date D. Toppins M. Sasso 063451 08-28-15 Title MT20w Enrollment Reader UG Creation Date 07-20-15 Created By D. Toppins Software: InDesign CS6 Number Revision xxxxxxxxx Activity 3899 Hancock Expwy Security, CO 80911 © Allegion 2015
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2015:08:28 15:36:31-06:00 Metadata Date : 2015:08:28 15:36:31-06:00 Modify Date : 2015:08:28 15:36:31-06:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:67a31216-8a4d-46a4-acf7-f14dbfb92c11 Original Document ID : xmp.did:B3C2E3841071E4119FB3F2B4E7831278 Document ID : xmp.id:A887738FCC4DE511BE2FAD3E618DC10A Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:A787738FCC4DE511BE2FAD3E618DC10A Derived From Document ID : xmp.did:A787738FCC4DE511BE2FAD3E618DC10A Derived From Original Document ID: xmp.did:B3C2E3841071E4119FB3F2B4E7831278 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2015:08:28 15:36:31-06:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 13 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools