XceedID XF2100C Multi-Tech Credential Reader User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1415487
Application ID	PMDYRnE4gVIDkSxZeM7Z+A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.77kB (234617 bits)
Date Submitted	2011-02-11 00:00:00
Date Available	2011-06-01 00:00:00
Creation Date	2011-02-01 11:35:03
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2011-02-01 11:35:05
Document Title	Users Manual
Document Creator	Adobe InDesign CS5 (7.0.3)

XceedID Corporation
3899 Hancock Expressway
Security, CO 80911
Tel: 303-273-9930
Fax: 303-273-9937
www.xceedid.com
Description
The Multi-technology Readers feature a rugged design and
can be installed almost anywhere. Durable, weatherproof,
UV-resistant materials, along with advanced electronics
and circuitry, protect readers against inclement weather
and exposure to sunlight.
Figure 1. Multi-technology Readers
Multi-technology Readers
Installation Guide
2. Drill two mounting holes a minimum of 3.25” (82.6 cm)
apart on the mounting surface of the door frame or wall.
Refer to Figure 3.
3. Drill one .625” (1.587 cm) diameter hole in wall for the
pigtail wire connection.
4. Follow the cable connection chart. Connect power at the
panel when installation is complete.
5. Mount the base plate to the wall using the supplied screws.
6. Install gasket if required, see Figure 2.
7. Install top cover straight on to the reader base. Do not
force the cover on. The four cover guides should ensure
the connector seats correctly.
Figure 3.
1.750
[44.5]
1.160
[29.5]
Mounting the Reader
1. Find a suitable mounting position on the door frame or wall.
Note: For out of doors or wet locations, it is recommended
that the gasket provided be installed on the base as shown
in Figure 2.
5.850 [148.6]
Figure 2. Gasket Installation
front view
side view
Figure 4. Aligning base plate and top cover
8. Verify the connection is secure and install the security
screws at the top and bottom of the reader.
9. Place a screw head cover over each of the screws. The
screw head cover should be flush with the reader once in
place.
Connecting the Cable
1. The readers are supplied with a 12-conductor cable
pigtail. Ensure the reader wiring is disconnected at the
host panel until all connections are made at the reader.
Use the cable connection chart below:
Yellow
Beeper
Blue
Hold
Purple
Future
Green
Wiegand Data 0 or RS485A
White
Wiegand Data 1 or RS485A
Orange
Green LED
Brown
Red LED
Red
Power + DC (6-16 VDC)
Black
Ground
Pink
Not Used
Gray
Not Used
Drain
Shield Ground
2. Use a DC Power source between 8-16 volts.
3. Verify the reader is properly grounded by attaching the
ground wire to an earth ground connection at the power
supply or panel end of the cable.
Testing the Reader
1. Power up the reader. A red LED will light followed by a
beeper tone, which indicates the reader is ready.
2. Present a proper card, which has been programmed to
operate the reader.
* A green LED indicates a registered badge read.
* A red LED indicates idle (ready to read) state in the
Wiegand mode.
Removing the Cover
1. Remove the plugs and security screws.
2. Slide cover off perpendicular to base.
Trouble Shooting
1. If reader does not behave normally upon installation,
verify that cover and base are connected properly:
The reader is shipped unassembled. To assemble, pull cover
away from base and rotate until the connector port on
the base is aligned with the connector port on the cover.
Snap shut.
2. Only connect wires necessary for use. Cut and/or isolate
unused wires. Connecting unnecessary wires may lead to
unexpected reader behavior.
3. If multiple reader units are installed in close proximity or
back to back, RF interference may result in reduced read
range performance.
4. A recurrent triple beep audio sequence may indicate
that the cover is not seated properly. Remove cover and
check for bent or broken pins in the connector.
Copyright © 2007-2011, XceedID. All rights reserved. Revised 2/1/2011.
Specifications
Colors
Black (standard), charcoal
Power supply
Linear DC
Voltage range
8 - 16 VDC
Maximum and Average
Current range
XF2110C: 173 mA (max),
155mA (aver)
XF2100C: 157 mA (max),
141 mA (aver)
XF1100C: 132 mA(max),
116 mA (aver)
Temperature range
-31 F to 149 F
-35 C to 65 C
Card read distance
Distance can vary depending on
reader, installation conditions
and credential type.
Cable distance to panel 200 ft. max (22 gauge)
300 ft. max. (20 gauge)
500 ft. max. (18 gauge)
Wiegand output
Up to 200 bits depending
on configuration and card
technology
Tamper output
Open Collector
Regulatory approvals
and standards
UL, CE, and FCC (part 15)
ISO Standards
ISO 14443A
ISO 15693
The voltage specification for this reader is 8-16 VDC.
Higher voltage with the specifications provides better
performance and cable run distances.
The recommended cable gauge is 18-gauge to 22-gauge.
Check with the cable supplier to determine the best choice
for the application and installation distance.
FCC compliance
The FCC requires the following statement: This reader uses
radio frequency energy and has been tested, and complies
with the limits of FCC testing. Changes, modification,
or disregard of proper installation and instructions not
expressly approved by XceedID, and is strictly prohibited by
the FCC and could void the user’s authority to operate the
equipment.
a. This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired
operation of the device.
b. Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas
produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
Ordering Information
Product
Description
XF-1100-B
(Standard Black)
Mullion mount;
Wiegand output
XF-2100-B
(Standard Black)
1-Gang US mount;
Wiegand output
XF-2110-B
(Standard Black)
1-Gang US mount; Keypad; Wiegand
output
XF-1100-C (Charcoal)
Mullion mount; Wiegand output
XF-2100-C (Charcoal)
1-Gang US mount;
Wiegand output
XF-2110-C (Charcoal)
1-Gang US mount; Keypad; Wiegand
output

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Create Date                     : 2011:02:01 11:35:03-08:00
Metadata Date                   : 2011:02:01 11:35:05-08:00
Modify Date                     : 2011:02:01 11:35:05-08:00
Creator Tool                    : Adobe InDesign CS5 (7.0.3)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 9123 bytes, use -b option to extract), (Binary data 10341 bytes, use -b option to extract)
Document ID                     : adobe:docid:indd:aa641ad4-538e-11da-8d89-a1911f463678
Instance ID                     : uuid:f8d6940d-ea94-7d4f-b046-92de25c46635
Original Document ID            : adobe:docid:indd:aa641ad4-538e-11da-8d89-a1911f463678
Rendition Class                 : proof:pdf
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:6C0030F0182068118083F0123C07CB04, xmp.iid:6D0030F0182068118083F0123C07CB04, xmp.iid:5FF53117192068118083F0123C07CB04, xmp.iid:A8CF0C2D192068118083F0123C07CB04, xmp.iid:90650567192068118083F0123C07CB04, xmp.iid:83AA258C192068118083F0123C07CB04, xmp.iid:B0611C74072068118C14FACA2E5AD8C3, xmp.iid:B4132FC7082068118C14FACA2E5AD8C3, xmp.iid:45B54E64092068118C14FACA2E5AD8C3, xmp.iid:76C9E3C5092068118C14FACA2E5AD8C3, xmp.iid:77C9E3C5092068118C14FACA2E5AD8C3, xmp.iid:3C1DB5850A2068118C14FACA2E5AD8C3, xmp.iid:35660ED50A2068118C14FACA2E5AD8C3, xmp.iid:A2D05AF20A2068118C14FACA2E5AD8C3, xmp.iid:876A9E830B2068118C14FACA2E5AD8C3, xmp.iid:61917BD80B2068118C14FACA2E5AD8C3, xmp.iid:84202074072068118C14CFF757D93512, xmp.iid:39B5DF83072068118C14CFF757D93512, xmp.iid:75411091072068118C14CFF757D93512, xmp.iid:E49253C4072068118C14CFF757D93512, xmp.iid:E59253C4072068118C14CFF757D93512, xmp.iid:D46B2774072068118A6DA4547D8DF9D8, xmp.iid:3FFFFA120C2068118A6DA4547D8DF9D8, xmp.iid:EA74D8700C2068118A6DA4547D8DF9D8, xmp.iid:5A441B74072068118C14F3A5F492FB6D, xmp.iid:14AF1474072068118A6D992D84B58F4B, xmp.iid:CE5E9188072068118A6D992D84B58F4B, xmp.iid:43CD8B9C072068118A6D992D84B58F4B, xmp.iid:A91A2474072068118A6DC62FB54B9A49, xmp.iid:10A521EF072068118A6DC62FB54B9A49, xmp.iid:35896809082068118A6DC62FB54B9A49, xmp.iid:80AF2B1C082068118A6DC62FB54B9A49, xmp.iid:FB8F6A23082068118A6DC62FB54B9A49
History When                    : 2010:07:16 16:02:18-07:00, 2010:07:16 16:02:18-07:00, 2010:07:16 16:03:24-07:00, 2010:07:16 16:04-07:00, 2010:07:16 16:05:37-07:00, 2010:07:16 16:06:40-07:00, 2010:10:03 17:17:40-07:00, 2010:10:03 17:27:09-07:00, 2010:10:03 17:31:32-07:00, 2010:10:03 17:34:16-07:00, 2010:10:03 17:35:23-07:00, 2010:10:03 17:39:38-07:00, 2010:10:03 17:41:51-07:00, 2010:10:03 17:42:40-07:00, 2010:10:03 17:46:44-07:00, 2010:10:03 17:49:06-07:00, 2010:10:07 12:21:29-07:00, 2010:10:07 12:21:56-07:00, 2010:10:07 12:22:18-07:00, 2010:10:07 12:23:44-07:00, 2010:10:07 12:25:32-07:00, 2010:11:19 18:24:56-08:00, 2010:11:19 18:58:01-08:00, 2010:11:19 19:00:38-08:00, 2010:12:03 14:19:28-08:00, 2010:12:03 14:24:25-08:00, 2010:12:03 14:25-08:00, 2010:12:03 14:25:33-08:00, 2011:02:01 11:29:17-08:00, 2011:02:01 11:32:43-08:00, 2011:02:01 11:33:27-08:00, 2011:02:01 11:33:59-08:00, 2011:02:01 11:34:11-08:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Doc Change Count                : 390
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS5 (7.0.3)

EXIF Metadata provided by EXIF.tools