Xiamen Tongren IOT Technology US-SC201 Smart Surveillance Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2610392
Application ID	FDkuoXKd5jFQL5nRsuLsCw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	31.43kB (392924 bits)
Date Submitted	2015-05-12 00:00:00
Date Available	2015-11-08 00:00:00
Creation Date	2015-04-18 15:37:38
Producing Software	Acrobat Distiller 8.0.0 (Windows)
Document Lastmod	2015-04-18 15:37:38
Document Title	Microsoft Word - User Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

Smart Surveillance Camera – Manual
Product Name: SmartHome – Wireless Smart Surveillance Camera
Product Description:
This product is a key part in the USUNG SmartHome Safeguarding & Surveillance System,
and it may transmit local live video to USUNG SmartHome Controlling Client Software through
LAN or Internet, as allows the user to view live surveillance scene through their mobile phone at
any time.
Moreover, this product also comes up with wireless data link module, which allows you
install these cameras in your home wherever power supply is available without consideration of
network cabling.
Installation:
Before the hardware installation, please refer to and follow the method introduced in
the“Software Usage & Settings”section of the “Home Safeguarding & Surveillance Suite Initial
Setup & Usage Guide” to add the surveillance camera to your home wireless network, and
thereafter, to proceed with the fixing and installation.
1)Ceiling Installation
•
Drill two holes for screws at proper positions on the bottom plate;
•
Insert the larger screws through the bottom plate and use them to fix the bottom plate
to the ceiling;
•
Align the two holes in the camera bottom to the holes on the bottom plate, lock and
tighten them up.
2)Wall Installation
•
Fix the iron plate to the bottom plate by fastening two smaller screws into the smaller
screw holes on the bottom plate.
•
Drill two holes at proper positions in the wall with a 6mm drill bit, and insert the screw
sleeves, and fasten both larger screws through the two side holes on the iron plate.
•
Align the two holes in the camera bottom to the holes on the bottom plate, lock and
tighten them up.
Connect to Network
Wired Connection: Connect one of the RJ45 jacks of a Twisted Pair Cable (Network Cable)
to the Ethernet interface on the rear of the camera, and another to a router or a switch(note
that twisted pair cable usually cannot exceed 100 meters, otherwise may lead to unstable
communication or connection failure. For distance exceeding 100 meters, a switch is
recommended as relay;
Wireless connection: using home WIFI network to establish data connections( for wireless
configuration for the Surveillance Camera, please refer to “USUNG Home Safeguarding &
Surveillance Suite Initial Setup and Usage Guide” for details.
Power‐on
Connect the power cable jack to the camera and the power adapter to a power source
outlet. Do please use the original in‐package power adapter, otherwise may possibly cause
hardware damage.
Check the Network Indicator
After power on, the camera starts to work, under normal case, the green light on the back
of the Surveillance Camera will be steadily on, and the yellow light will be flashing.
Interface Description:
Adjustable Lens: Slightly rotate the lens clockwisely or counterclockwisely, until you get the
clearest view.
Rotate the camera: through the mobile client software, you may control to rotate the
camera, for details please refer to “Home Safeguarding & Surveillance Suite Initial Setup & Usage
Guide”
Monitor through a smartphone: this device support apple iPhone and smartphone with
Android system. As soon as the user installs the USUNG Home Safeguarding & Surveillance Client
Software, and configures the Surveillance Camera properly by followingthe “Home Safeguarding
& Surveillance Suite Initial Setup & Usage Guide” that is included in the product package, he/ she
may monitor live surveillance scenes through the cameras from his/her smartphone.
Precautions:
1. Please do not disassemble or try to repair the product in your own will;
2. Please do not put the product under extreme conditions like high
temperature or high pressure , etc.;
3. Please keep the product away from baby or child;
4. Please keep the product dry and away from humidity;
Xiamen Tongren IOT Technology Co.,Ltd.
24Hr hotline service:4008888022
Website：http://home.iusung.com
Usung Home Safeguarder Manual
Firstly, please download and install appropriate version of our client software
from:http://home.iusung.com/en
Secondly, you need to connect the camera to your LAN with a cable.
Open the client software, please sign-up for a USUNG account, and log in.
You may set a Sync Code during the sign-up process so that other family members may
take advantage of the existing configuration.
Please Add the Camera after login.
You may add camera(s):
1.by inputting device ID
2.by scanning the camera barcode from your mobile
(Device ID and barcode are printed on label at the bottom of the camera)
3.by searching – automatically search and add cameras in the LAN.
4.by adding from shared accounts.
(Enter the Sync Code set in the sign-up process for a USUNG Account, once signed-in
you may acquire shared camera information under this account.)
Lastly, input the password for the camera itself (default no password), click on the “Done ”
button to finish adding.
The camera will be shown in the main interface, click to view the monitor screen, and click
the Gear Button in the right side to configure the camera.
You may click on the Edit Button at the top right corner to modify camera information such
as name, access code etc., or delete camera.
Operations that you can perform in the monitor view interface:
Horizontal/vertical mirror view, cradle head auto-rotation, live sound, rotation lock,
photographs, video, watch mode settings and exit.
In the Camera Settings interface
You can set the camera to connect to your home LAN through WIFI;
You can set an independent password for the camera;
Alarm & push message settings and TF card settings for video storage.
By touching navigation icons at the bottom, you may view alarm history, snapshots, and
video information at any time;
In Settings you may configure your USUNG Account;
In Settings interface, you may set to share your cameras, and only those shared cameras
can be synchronized to other mobile with a Sync Code.
You may insert a TF card at the back of the camera, then the camera may start recording
videos automatically. You may view recently recorded videos from the Video function that
you can find in the navigation section at the bottom of the main interface.
Firstly, click on the Video button at the bottom, and switch to remote mode.
Secondly, click on the camera that you want to view its videos recorded.
Note:
Remote: video will be stored in the TF card inserted into the camera.
Mobile: videos will be stored in your mobile when you click on the Video button to record
videos while viewing the monitor screen.
Precautions:
1. Please do not disassemble or try to repair the product in your own will;
2. Please do not put the product under extreme conditions like high temperature or
high pressure, etc.;
3. Please keep the product away from baby or child;
4. Please keep the product dry and away from humidity;
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter should be installed and operatated with a
minimum distance of 20 centimeters between the radiator and your body and must not be
co-located or operating in conjunction with any other antenna or transmitter.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the
user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference
received, including interference that may
cause undesired operation. This device and its antenna(s) must not be co-located or
operating in conjunction with any other
antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the followingmeasures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2015:04:18 15:37:38+08:00
Create Date                     : 2015:04:18 15:37:38+08:00
Format                          : application/pdf
Title                           : Microsoft Word - User Manual
Creator                         : Administrator
Producer                        : Acrobat Distiller 8.0.0 (Windows)
Document ID                     : uuid:babdb0e6-2495-4024-a4d9-826f1b4ae21d
Instance ID                     : uuid:203b4673-71c9-4e19-8649-feac1d0a6df3
Page Count                      : 14
Author                          : Administrator

EXIF Metadata provided by EXIF.tools